githubmirror/deno

cli/worker.rs
824 строки28 KB
Maciej Wilk
fix(watch): execute preload modules under --watch (#35792)
07 июл 2026, 10:34
07 июл 2026, 10:3446e0955
// Copyright 2018-2026 the Deno authors. MIT license.

use std::cell::RefCell;
use std::path::PathBuf;
use std::rc::Rc;
use std::sync::Arc;

use deno_ast::ModuleSpecifier;
use deno_core::Extension;
use deno_core::OpState;
use deno_core::error::CoreError;
use deno_core::error::JsError;
use deno_core::futures::FutureExt;
use deno_core::v8;
use deno_error::JsErrorBox;
use deno_lib::worker::LibMainWorker;
use deno_lib::worker::LibMainWorkerFactory;
use deno_lib::worker::ResolveNpmBinaryEntrypointError;
use deno_npm_installer::PackageCaching;
use deno_npm_installer::graph::NpmCachingStrategy;
use deno_runtime::CpuProfilerConfig;
use deno_runtime::WorkerExecutionMode;
use deno_runtime::coverage::CoverageCollector;
use deno_runtime::cpu_prof_filename;
use deno_runtime::cpu_profiler::CpuProfiler;
use deno_runtime::deno_os::OpExitCallbacks;
use deno_runtime::deno_os::WatcherExitHandle;
use deno_runtime::deno_os::WatcherExited;
use deno_runtime::deno_permissions::PermissionsContainer;
use deno_runtime::worker::MainWorker;
use deno_semver::npm::NpmPackageReqReference;
use tokio::select;

use crate::args::CliLockfile;
use crate::npm::CliNpmInstaller;
use crate::npm::CliNpmResolver;
use crate::sys::CliSys;
use crate::tools::run::hmr::HmrRunner;
use crate::tools::run::hmr::HmrRunnerState;
use crate::util::file_watcher::WatcherCommunicator;
use crate::util::file_watcher::WatcherRestartMode;
use crate::util::progress_bar::ProgressBar;

pub type CreateHmrRunnerCb = Box<dyn Fn() -> HmrRunnerState + Send + Sync>;

pub struct CliMainWorkerOptions {
  pub create_hmr_runner: Option<CreateHmrRunnerCb>,
  pub maybe_coverage_dir: Option<PathBuf>,
  pub maybe_cpu_prof_config: Option<CpuProfilerConfig>,
  pub default_npm_caching_strategy: NpmCachingStrategy,
  pub needs_test_modules: bool,
  pub initial_cwd: Arc<ModuleSpecifier>,
}

/// Data shared between the factory and workers.
struct SharedState {
  pub create_hmr_runner: Option<CreateHmrRunnerCb>,
  pub maybe_coverage_dir: Option<PathBuf>,
  pub maybe_cpu_prof_config: Option<CpuProfilerConfig>,
  pub maybe_file_watcher_communicator: Option<Arc<WatcherCommunicator>>,
  pub initial_cwd: Arc<ModuleSpecifier>,
}

pub struct CliMainWorker {
  worker: LibMainWorker,
  shared: Arc<SharedState>,
}

impl CliMainWorker {
  #[inline]
  pub fn into_main_worker(self) -> MainWorker {
    self.worker.into_main_worker()
  }

  pub async fn setup_repl(&mut self) -> Result<(), CoreError> {
    self.worker.run_event_loop(false).await?;
    Ok(())
  }

  pub async fn run(&mut self) -> Result<i32, CoreError> {
    let maybe_coverage_collector = self.maybe_setup_coverage_collector();
    let maybe_cpu_profiler = self.maybe_setup_cpu_profiler();
    let mut maybe_hmr_runner = self.maybe_setup_hmr_runner();

    // Wrap profiler and coverage in Rc<RefCell<Option<...>>> so that
    // both the normal cleanup path and the Deno.exit() op_exit path
    // can stop them. Whichever runs first takes the value; the other
    // finds None and skips.
    let coverage_cell: Rc<RefCell<Option<CoverageCollector>>> =
      Rc::new(RefCell::new(maybe_coverage_collector));
    let profiler_cell: Rc<RefCell<Option<CpuProfiler>>> =
      Rc::new(RefCell::new(maybe_cpu_profiler));

    // Register exit callbacks so Deno.exit() flushes profiling/coverage
    // data before calling std::process::exit().
    {
      let coverage_for_exit = coverage_cell.clone();
      let profiler_for_exit = profiler_cell.clone();
      let inspector = self.worker.js_runtime().inspector();
      let mut cbs = OpExitCallbacks::default();
      cbs.push(Box::new(move || {
        if let Some(mut cc) = coverage_for_exit.borrow_mut().take() {
          let _ = cc.stop_collecting();
        }
      }));
      cbs.push(Box::new(move || {
        if let Some(mut cp) = profiler_for_exit.borrow_mut().take() {
          let _ = cp.stop_profiling();
        }
      }));
      // When an inspector session is connected, notify it that the
      // execution context is being destroyed before exiting. Without this,
      // process.exit() would call std::process::exit() immediately,
      // skipping the normal event-loop shutdown path where V8's
      // context_destroyed is called and Runtime.executionContextDestroyed
      // is sent to debuggers.
      cbs.push(Box::new(move || {
        let sessions_state = inspector.sessions_state();
        if sessions_state.has_nonblocking_wait_for_disconnect {
          inspector.broadcast_context_destroyed();
          // Sessions that called NodeRuntime.notifyWhenWaitingForDisconnect
          // get a dedicated notification before the wait loop, instead of
          // the generic Runtime.executionContextDestroyed.
          inspector.broadcast_waiting_for_disconnect();
          // Match Node.js message format that debugger clients rely on
          log::info!("Waiting for the debugger to disconnect...");
          inspector.wait_for_sessions_disconnect();
        }
      }));
      self.worker.js_runtime().op_state().borrow_mut().put(cbs);
    }

    let has_coverage = coverage_cell.borrow().is_some();

    // WARNING: Remember to update cli/lib/worker.rs to align with
    // changes made here so that they affect deno_compile as well.

    // Under `deno run --watch-hmr` / `deno serve --watch`, install the isolate
    // handle so a script calling `Deno.exit()` terminates this isolate instead
    // of the whole process, allowing the file watcher to survive and restart on
    // the next change. The regular `--watch` path uses `run_for_watcher`, which
    // installs it separately. See issue #7590.
    let under_watcher = self.shared.maybe_file_watcher_communicator.is_some();
    if under_watcher {
      self.install_watcher_exit_handle();
    }

    // Like Node.js, allow activating the inspector on an already running
    // process by sending it SIGUSR1.
    #[cfg(unix)]
    self.spawn_sigusr1_inspector_listener();

    let mut result = self
      .run_to_completion(&mut maybe_hmr_runner, has_coverage)
      .await;

    // If the script called `Deno.exit()` under a watcher, `op_exit` terminated
    // the isolate instead of the process. Treat it as a normal end of run:
    // clear V8's termination flag so the worker can be dropped cleanly. The
    // exit code recorded by `Deno.exit()` is reported below. See issue #7590.
    if result.is_err() && under_watcher && self.exited_via_watcher() {
      self.cancel_terminate_execution();
      result = Ok(());
    }

    if let Some(mut coverage_collector) = coverage_cell.borrow_mut().take() {
      coverage_collector.stop_collecting()?;
    }
    if let Some(mut cpu_profiler) = profiler_cell.borrow_mut().take() {
      cpu_profiler.stop_profiling()?;
    }
    if let Some(hmr_runner) = maybe_hmr_runner.as_mut() {
      hmr_runner.stop();
    }

    result?;
    Ok(self.worker.exit_code())
  }

  /// Starts listening for SIGUSR1 and activates the inspector server when
  /// the signal is received, mirroring Node.js behavior. Listening starts
  /// after a short grace period so that short-lived programs don't pay the
  /// cost of installing a process-wide signal handler.
  #[cfg(unix)]
  fn spawn_sigusr1_inspector_listener(&mut self) {
    use deno_runtime::deno_inspector_server::activate_default_inspector_server;

    const GRACE_PERIOD: std::time::Duration =
      std::time::Duration::from_millis(500);

    // Hold only a `Weak` reference to the inspector: the runtime asserts on
    // teardown that it is the sole owner, so this long-lived task must not keep
    // it alive. We upgrade to a strong reference only while handling a signal.
    let inspector =
      std::rc::Rc::downgrade(&self.worker.js_runtime().inspector());
    let op_state = self.worker.js_runtime().op_state();
    let main_module = self.worker.main_module().to_string();

    deno_core::unsync::spawn(async move {
      tokio::time::sleep(GRACE_PERIOD).await;
      let Ok(mut sigusr1) = deno_signals::signal_stream(libc::SIGUSR1) else {
        return;
      };
      while sigusr1.recv().await.is_some() {
        // The runtime is gone (the program finished); stop listening.
        let Some(inspector) = inspector.upgrade() else {
          return;
        };
        if let Some(url) = activate_default_inspector_server(
          deno_lib::version::DENO_VERSION_INFO.user_agent,
          main_module.clone(),
          inspector,
          false,
        ) {
          op_state.borrow_mut().put(url);
        }
      }
    });
  }

  /// Runs the main module to completion: preload + main module, lifecycle
  /// events, and the event loop (including the HMR loop when `maybe_hmr_runner`
  /// is set).
  async fn run_to_completion(
    &mut self,
    maybe_hmr_runner: &mut Option<HmrRunner>,
    has_coverage: bool,
  ) -> Result<(), CoreError> {
    log::debug!("main_module {}", self.worker.main_module());

    // Run preload modules first if they were defined
    self.worker.execute_preload_modules().await?;
    self.execute_main_module().await?;
    self.worker.dispatch_load_event()?;

    loop {
      if let Some(hmr_runner) = maybe_hmr_runner.as_mut() {
        let hmr_future = hmr_runner.run().boxed_local();
        let event_loop_future = self.worker.run_event_loop(false).boxed_local();

        let result;
        select! {
          hmr_result = hmr_future => {
            result = hmr_result;
          },
          event_loop_result = event_loop_future => {
            result = event_loop_result;
          }
        }
        if let Err(e) = result {
          self
            .shared
            .maybe_file_watcher_communicator
            .as_ref()
            .unwrap()
            .change_restart_mode(WatcherRestartMode::Automatic);
          return Err(e);
        }
      } else {
        // TODO(bartlomieju): this might not be needed anymore
        self.worker.run_event_loop(!has_coverage).await?;
      }

      let web_continue = self.worker.dispatch_beforeunload_event()?;
      if !web_continue {
        let node_continue = self.worker.dispatch_process_beforeexit_event()?;
        if !node_continue {
          break;
        }
      }
    }

    self.worker.dispatch_unload_event()?;
    self.worker.dispatch_process_exit_event()?;
    self.worker.run_napi_ref_finalizers();

    Ok(())
  }

  pub async fn run_for_watcher(mut self) -> Result<i32, CoreError> {
    // Install the isolate handle so that a script calling `Deno.exit()`
    // terminates this isolate instead of the whole process, allowing the file
    // watcher to survive and restart on the next change. See issue #7590.
    self.install_watcher_exit_handle();

    /// The FileWatcherModuleExecutor provides module execution with safe dispatching of life-cycle events by tracking the
    /// state of any pending events and emitting accordingly on drop in the case of a future
    /// cancellation.
    struct FileWatcherModuleExecutor {
      inner: CliMainWorker,
      pending_unload: bool,
    }

    impl FileWatcherModuleExecutor {
      pub fn new(worker: CliMainWorker) -> FileWatcherModuleExecutor {
        FileWatcherModuleExecutor {
          inner: worker,
          pending_unload: false,
        }
      }

      /// Execute the given main module emitting load and unload events before and after execution
      /// respectively.
      pub async fn execute(&mut self) -> Result<(), CoreError> {
        // Set pending_unload before module execution so that if the future
        // is cancelled during a top-level await, Drop will still dispatch
        // the unload event for any handlers registered during partial
        // module evaluation. This covers preload modules too, which can
        // also register unload handlers.
        self.pending_unload = true;
        // Run preload modules first if they were defined
        if let Err(e) = self.inner.execute_preload_modules().await {
          self.pending_unload = false;
          return Err(e);
        }
        if let Err(e) = self.inner.execute_main_module().await {
          self.pending_unload = false;
          return Err(e);
        }
        self.inner.worker.dispatch_load_event()?;

        let result = loop {
          match self.inner.worker.run_event_loop(false).await {
            Ok(()) => {}
            Err(error) => break Err(error),
          }
          let web_continue = self.inner.worker.dispatch_beforeunload_event()?;
          if !web_continue {
            let node_continue =
              self.inner.worker.dispatch_process_beforeexit_event()?;
            if !node_continue {
              break Ok(());
            }
          }
        };
        self.pending_unload = false;

        result?;

        self.inner.worker.dispatch_unload_event()?;
        self.inner.worker.dispatch_process_exit_event()?;
        self.inner.worker.run_napi_ref_finalizers();

        Ok(())
      }
    }

    impl Drop for FileWatcherModuleExecutor {
      fn drop(&mut self) {
        if self.pending_unload {
          let _ = self.inner.worker.dispatch_unload_event();
          let _ = self.inner.worker.dispatch_process_exit_event();
        }
      }
    }

    let mut executor = FileWatcherModuleExecutor::new(self);
    let result = executor.execute().await;

    // If the script called `Deno.exit()`, `op_exit` terminated the isolate
    // instead of the process. Treat it as a normal end of run: clear V8's
    // termination flag so the worker can be dropped cleanly, and report the
    // requested exit code rather than propagating the termination as an error.
    // The watcher then waits for the next file change. See issue #7590.
    if executor.inner.exited_via_watcher() {
      executor.inner.cancel_terminate_execution();
      return Ok(executor.inner.worker.exit_code());
    }

    result?;
    Ok(executor.inner.worker.exit_code())
  }

  #[inline]
  pub async fn execute_main_module(&mut self) -> Result<(), CoreError> {
    self.worker.execute_main_module().await
  }

  #[inline]
  pub async fn execute_side_module(&mut self) -> Result<(), CoreError> {
    self.worker.execute_side_module().await
  }

  #[inline]
  pub async fn execute_preload_modules(&mut self) -> Result<(), CoreError> {
    self.worker.execute_preload_modules().await
  }

  pub fn op_state(&mut self) -> Rc<RefCell<OpState>> {
    self.worker.js_runtime().op_state()
  }

  /// Returns a thread-safe handle to the V8 isolate. Used by the test runner
  /// to install a handle that `op_test_isolate_exit` can call
  /// `terminate_execution` on.
  pub fn v8_isolate_handle(&mut self) -> v8::IsolateHandle {
    self.worker.js_runtime().v8_isolate().thread_safe_handle()
  }

  /// Reset the V8 "terminating" flag. Called after the test runner detects
  /// that the isolate's termination was caused by user code calling
  /// `Deno.exit()`; this lets us cleanly tear down the worker.
  pub fn cancel_terminate_execution(&mut self) {
    self
      .worker
      .js_runtime()
      .v8_isolate()
      .cancel_terminate_execution();
  }

  /// Install the isolate handle so that a script calling `Deno.exit()`
  /// terminates this isolate instead of the whole process. Used by the file
  /// watcher paths (`deno run --watch[-hmr]`, `deno serve --watch`) so a script
  /// calling `Deno.exit()` ends the current run without killing the watcher.
  /// See issue #7590.
  fn install_watcher_exit_handle(&mut self) {
    let isolate_handle = self.v8_isolate_handle();
    self
      .op_state()
      .borrow_mut()
      .put(WatcherExitHandle(isolate_handle));
  }

  /// Whether the current run ended because the script called `Deno.exit()` while
  /// a [`WatcherExitHandle`] was installed, i.e. `op_exit` terminated the
  /// isolate instead of the process. See [`install_watcher_exit_handle`].
  fn exited_via_watcher(&mut self) -> bool {
    self.op_state().borrow().has::<WatcherExited>()
  }

  pub fn maybe_setup_hmr_runner(&mut self) -> Option<HmrRunner> {
    let setup_hmr_runner = self.shared.create_hmr_runner.as_ref()?;

    let hmr_runner_state = setup_hmr_runner();
    let state = hmr_runner_state.clone();

    let callback = Box::new(move |message| hmr_runner_state.callback(message));
    let session = self.worker.create_inspector_session(callback);
    let mut hmr_runner = HmrRunner::new(state, session);
    hmr_runner.start();

    Some(hmr_runner)
  }

  pub fn maybe_setup_coverage_collector(
    &mut self,
  ) -> Option<CoverageCollector> {
    let coverage_dir = self.shared.maybe_coverage_dir.as_ref()?;
    let mut coverage_collector =
      CoverageCollector::new(self.worker.js_runtime(), coverage_dir.clone());
    coverage_collector.start_collecting();

    Some(coverage_collector)
  }

  pub fn maybe_setup_cpu_profiler(&mut self) -> Option<CpuProfiler> {
    let config = self.shared.maybe_cpu_prof_config.as_ref()?;
    let filename = cpu_prof_filename(config, None);

    let mut cpu_profiler = CpuProfiler::new(
      self.worker.js_runtime(),
      config.dir.clone(),
      filename,
      config.interval,
      config.md,
      config.flamegraph,
    );
    cpu_profiler.start_profiling();

    Some(cpu_profiler)
  }

  pub fn execute_script_static(
    &mut self,
    name: &'static str,
    source_code: &'static str,
  ) -> Result<v8::Global<v8::Value>, Box<JsError>> {
    self.worker.js_runtime().execute_script(name, source_code)
  }
}

#[derive(Debug, thiserror::Error, deno_error::JsError)]
pub enum CreateCustomWorkerError {
  #[class(inherit)]
  #[error(transparent)]
  Io(#[from] std::io::Error),
  #[class(inherit)]
  #[error(transparent)]
  Core(#[from] CoreError),
  #[class(inherit)]
  #[error(transparent)]
  ResolvePkgFolderFromDenoReq(
    #[from] deno_resolver::npm::ResolvePkgFolderFromDenoReqError,
  ),
  #[class(inherit)]
  #[error(transparent)]
  UrlParse(#[from] deno_core::url::ParseError),
  #[class(inherit)]
  #[error(transparent)]
  ResolveNpmBinaryEntrypoint(#[from] ResolveNpmBinaryEntrypointError),
  #[class(inherit)]
  #[error(transparent)]
  NpmPackageReq(JsErrorBox),
  #[class(inherit)]
  #[error(transparent)]
  LockfileWrite(#[from] deno_resolver::lockfile::LockfileWriteError),
}

pub struct CliMainWorkerFactory {
  lib_main_worker_factory: LibMainWorkerFactory<CliSys>,
  maybe_lockfile: Option<Arc<CliLockfile>>,
  npm_installer: Option<Arc<CliNpmInstaller>>,
  npm_resolver: CliNpmResolver,
  progress_bar: ProgressBar,
  root_permissions: PermissionsContainer,
  shared: Arc<SharedState>,
  default_npm_caching_strategy: NpmCachingStrategy,
  needs_test_modules: bool,
}

impl CliMainWorkerFactory {
  #[allow(clippy::too_many_arguments, reason = "construction")]
  pub fn new(
    lib_main_worker_factory: LibMainWorkerFactory<CliSys>,
    maybe_file_watcher_communicator: Option<Arc<WatcherCommunicator>>,
    maybe_lockfile: Option<Arc<CliLockfile>>,
    npm_installer: Option<Arc<CliNpmInstaller>>,
    npm_resolver: CliNpmResolver,
    progress_bar: ProgressBar,
    options: CliMainWorkerOptions,
    root_permissions: PermissionsContainer,
  ) -> Self {
    Self {
      lib_main_worker_factory,
      maybe_lockfile,
      npm_installer,
      npm_resolver,
      progress_bar,
      root_permissions,
      shared: Arc::new(SharedState {
        create_hmr_runner: options.create_hmr_runner,
        maybe_coverage_dir: options.maybe_coverage_dir,
        maybe_cpu_prof_config: options.maybe_cpu_prof_config,
        maybe_file_watcher_communicator,
        initial_cwd: options.initial_cwd,
      }),
      default_npm_caching_strategy: options.default_npm_caching_strategy,
      needs_test_modules: options.needs_test_modules,
    }
  }

  pub async fn create_main_worker(
    &self,
    mode: WorkerExecutionMode,
    main_module: ModuleSpecifier,
    preload_modules: Vec<ModuleSpecifier>,
    require_modules: Vec<ModuleSpecifier>,
  ) -> Result<CliMainWorker, CreateCustomWorkerError> {
    self
      .create_custom_worker(
        mode,
        main_module,
        preload_modules,
        require_modules,
        self.root_permissions.clone(),
        vec![],
        Default::default(),
        None,
      )
      .await
  }

  pub async fn create_main_worker_with_unconfigured_runtime(
    &self,
    mode: WorkerExecutionMode,
    main_module: ModuleSpecifier,
    preload_modules: Vec<ModuleSpecifier>,
    require_modules: Vec<ModuleSpecifier>,
    unconfigured_runtime: Option<deno_runtime::UnconfiguredRuntime>,
  ) -> Result<CliMainWorker, CreateCustomWorkerError> {
    self
      .create_custom_worker(
        mode,
        main_module,
        preload_modules,
        require_modules,
        self.root_permissions.clone(),
        vec![],
        Default::default(),
        unconfigured_runtime,
      )
      .await
  }

  #[allow(clippy::too_many_arguments, reason = "construction")]
  pub async fn create_custom_worker(
    &self,
    mode: WorkerExecutionMode,
    main_module: ModuleSpecifier,
    preload_modules: Vec<ModuleSpecifier>,
    require_modules: Vec<ModuleSpecifier>,
    permissions: PermissionsContainer,
    custom_extensions: Vec<Extension>,
    stdio: deno_runtime::deno_io::Stdio,
    unconfigured_runtime: Option<deno_runtime::UnconfiguredRuntime>,
  ) -> Result<CliMainWorker, CreateCustomWorkerError> {
    let main_module_npm_ref =
      NpmPackageReqReference::from_specifier(&main_module).ok();
    let mut npm_reqs = Vec::new();
    if let Some(package_ref) = &main_module_npm_ref {
      npm_reqs.push(package_ref.req().clone());
    }
    for specifier in preload_modules.iter().chain(require_modules.iter()) {
      if let Ok(package_ref) = NpmPackageReqReference::from_specifier(specifier)
      {
        npm_reqs.push(package_ref.req().clone());
      }
    }

    if !npm_reqs.is_empty()
      && let Some(npm_installer) = &self.npm_installer
    {
      let _clear_guard = self.progress_bar.deferred_keep_initialize_alive();
      npm_installer
        .add_package_reqs(
          &npm_reqs,
          if matches!(
            self.default_npm_caching_strategy,
            NpmCachingStrategy::Lazy
          ) {
            PackageCaching::Only(npm_reqs.as_slice().into())
          } else {
            PackageCaching::All
          },
        )
        .await
        .map_err(CreateCustomWorkerError::NpmPackageReq)?;
    }

    let main_module = match main_module_npm_ref {
      Some(package_ref) => {
        // use a fake referrer that can be used to discover the package.json if necessary
        let referrer = self.shared.initial_cwd.join("package.json")?;
        let package_folder =
          self.npm_resolver.resolve_pkg_folder_from_deno_module_req(
            package_ref.req(),
            &referrer,
          )?;
        let main_module =
          self.lib_main_worker_factory.resolve_npm_binary_entrypoint(
            &package_folder,
            package_ref.sub_path(),
          )?;

        if let Some(lockfile) = &self.maybe_lockfile {
          // For npm binary commands, ensure that the lockfile gets updated
          // so that we can re-use the npm resolution the next time it runs
          // for better performance
          lockfile.write_if_changed()?;
        }

        main_module
      }
      None => main_module,
    };

    let mut worker = self.lib_main_worker_factory.create_custom_worker(
      mode,
      main_module,
      preload_modules,
      require_modules,
      permissions,
      custom_extensions,
      stdio,
      unconfigured_runtime,
    )?;

    if self.needs_test_modules {
      macro_rules! test_file {
        ($($file:literal),*) => {
          $(worker.js_runtime().lazy_load_es_module_with_code(
            concat!("ext:cli/", $file),
            deno_core::ascii_str_include!(concat!("js/", $file)),
          )?;)*
        }
      }
      test_file!(
        "40_test_common.js",
        "40_test_snapshot.js",
        "40_test.js",
        "40_bench.js",
        "40_jupyter.js",
        "jupyter_kernel.js",
        // TODO(bartlomieju): probably shouldn't include these files here?
        "40_lint_selector.js",
        "40_lint.js"
      );
    }

    let op_state = worker.js_runtime().op_state();
    op_state.borrow_mut().put(deno_core::error::InitialCwd(
      self.shared.initial_cwd.clone(),
    ));

    Ok(CliMainWorker {
      worker,
      shared: self.shared.clone(),
    })
  }
}

#[allow(clippy::print_stdout, reason = "test code")]
#[allow(clippy::print_stderr, reason = "test code")]
#[cfg(test)]
mod tests {
  use std::rc::Rc;

  use deno_core::FsModuleLoader;
  use deno_core::resolve_path;
  use deno_resolver::npm::DenoInNpmPackageChecker;
  use deno_runtime::deno_fs::RealFs;
  use deno_runtime::deno_permissions::Permissions;
  use deno_runtime::permissions::RuntimePermissionDescriptorParser;
  use deno_runtime::worker::WorkerOptions;
  use deno_runtime::worker::WorkerServiceOptions;

  use super::*;
  use crate::util::env::resolve_cwd;

  fn create_test_worker() -> MainWorker {
    let main_module =
      resolve_path("./hello.js", &resolve_cwd(None).unwrap()).unwrap();
    let fs = Arc::new(RealFs);
    let permission_desc_parser = Arc::new(
      RuntimePermissionDescriptorParser::new(crate::sys::CliSys::default()),
    );
    let options = WorkerOptions {
      startup_snapshot: deno_snapshots::CLI_SNAPSHOT,
      ..Default::default()
    };

    MainWorker::bootstrap_from_options::<
      DenoInNpmPackageChecker,
      CliNpmResolver,
      CliSys,
    >(
      &main_module,
      WorkerServiceOptions {
        deno_rt_native_addon_loader: None,
        module_loader: Rc::new(FsModuleLoader),
        permissions: PermissionsContainer::new(
          permission_desc_parser,
          Permissions::none_without_prompt(),
        ),
        blob_store: Arc::new(deno_runtime::deno_web::BlobStore::default())
          as Arc<dyn deno_runtime::deno_web::BlobStoreTrait>,
        broadcast_channel: Default::default(),
        feature_checker: Default::default(),
        node_services: Default::default(),
        npm_process_state_provider: Default::default(),
        root_cert_store_provider: Default::default(),
        fetch_dns_resolver: Default::default(),
        shared_array_buffer_store: Default::default(),
        compiled_wasm_module_store: Default::default(),
        v8_code_cache: Default::default(),
        fs,
        bundle_provider: None,
      },
      options,
    )
  }

  #[tokio::test]
  async fn execute_mod_esm_imports_a() {
    let p = test_util::testdata_path().join("runtime/esm_imports_a.js");
    let module_specifier = ModuleSpecifier::from_file_path(&p).unwrap();
    let mut worker = create_test_worker();
    let result = worker.execute_main_module(&module_specifier).await;
    if let Err(err) = result {
      eprintln!("execute_mod err {err:?}");
    }
    if let Err(e) = worker.run_event_loop(false).await {
      panic!("Future got unexpected error: {e:?}");
    }
  }

  #[tokio::test]
  async fn execute_mod_circular() {
    let p = std::path::PathBuf::from(env!("CARGO_MANIFEST_DIR"))
      .parent()
      .unwrap()
      .join("tests/circular1.js");
    let module_specifier = ModuleSpecifier::from_file_path(&p).unwrap();
    let mut worker = create_test_worker();
    let result = worker.execute_main_module(&module_specifier).await;
    if let Err(err) = result {
      eprintln!("execute_mod err {err:?}");
    }
    if let Err(e) = worker.run_event_loop(false).await {
      panic!("Future got unexpected error: {e:?}");
    }
  }

  #[tokio::test]
  async fn execute_mod_resolve_error() {
    // "foo" is not a valid module specifier so this should return an error.
    let mut worker = create_test_worker();
    let module_specifier =
      resolve_path("./does-not-exist", &resolve_cwd(None).unwrap()).unwrap();
    let result = worker.execute_main_module(&module_specifier).await;
    assert!(result.is_err());
  }

  #[tokio::test]
  async fn execute_mod_002_hello() {
    // This assumes cwd is project root (an assumption made throughout the
    // tests).
    let mut worker = create_test_worker();
    let p = test_util::testdata_path().join("run/001_hello.js");
    let module_specifier = ModuleSpecifier::from_file_path(&p).unwrap();
    let result = worker.execute_main_module(&module_specifier).await;
    assert!(result.is_ok());
  }
}