/
githubmirror
/
cpython
Обзор
Документация
Войти
/
githubmirror
/
cpython
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v3.15.0a7
Modules/gc_weakref.txt
229 строк
12 KB
Neil Schemenauer
GH-135552: Make the GC clear weakrefs later (GH-136189)
08 авг 2025, 02:32
Не верифицирован
08 авг 2025, 02:32
350c58b
Код
Авторство
О чём код?
Intro ===== ************************************************************************** Note: this document was written long ago, before PEP 442 (safe object finalization) was implemented. While that has changed some things, this document is still mostly accurate. Just note that the rules being discussed here apply to the unreachable set of objects *after* non-legacy finalizers have been called. Also, the clearing of weakrefs has been changed to happen later in the collection (after running finalizers but before tp_clear is called). ************************************************************************** The basic rule for dealing with weakref callbacks (and __del__ methods too, for that matter) during cyclic gc: Once gc has computed the set of unreachable objects, no Python-level code can be allowed to access an unreachable object. If that can happen, then the Python code can resurrect unreachable objects too, and gc can't detect that without starting over. Since gc eventually runs tp_clear on all unreachable objects, if an unreachable object is resurrected then tp_clear will eventually be called on it (or may already have been called before resurrection). At best (and this has been an historically common bug), tp_clear empties an instance's __dict__, and "impossible" AttributeErrors result. At worst, tp_clear leaves behind an insane object at the C level, and segfaults result (historically, most often by setting a class's mro pointer to NULL, after which attribute lookups performed by the class can segfault). OTOH, it's OK to run Python-level code that can't access unreachable objects, and sometimes that's necessary. The chief example is the callback attached to a reachable weakref W to an unreachable object O. Since O is going away, and W is still alive, the callback must be invoked. Because W is still alive, everything reachable from its callback is also reachable, so it's also safe to invoke the callback (although that's trickier than it sounds, since other reachable weakrefs to other unreachable objects may still exist, and be accessible to the callback -- there are lots of painful details like this covered in the rest of this file). Python 2.4/2.3.5 ================ The "Before 2.3.3" section below turned out to be wrong in some ways, but I'm leaving it as-is because it's more right than wrong, and serves as a wonderful example of how painful analysis can miss not only the forest for the trees, but also miss the trees for the aphids sucking the trees dry <wink>. The primary thing it missed is that when a weakref to a piece of cyclic trash (CT) exists, then any call to any Python code whatsoever can end up materializing a strong reference to that weakref's CT referent, and so possibly resurrect an insane object (one for which cyclic gc has called-- or will call before it's done --tp_clear()). It's not even necessarily that a weakref callback or __del__ method does something nasty on purpose: as soon as we execute Python code, threads other than the gc thread can run too, and they can do ordinary things with weakrefs that end up resurrecting CT while gc is running. https://bugs.python.org/issue1055820 shows how innocent it can be, and also how nasty. Variants of the three focused test cases attached to that bug report are now part of Python's standard Lib/test/test_gc.py. Jim Fulton gave the best nutshell summary of the new (in 2.4 and 2.3.5) approach: Clearing cyclic trash can call Python code. If there are weakrefs to any of the cyclic trash, then those weakrefs can be used to resurrect the objects. Therefore, *before* clearing cyclic trash, we need to remove any weakrefs. If any of the weakrefs being removed have callbacks, then we need to save the callbacks and call them *after* all of the weakrefs have been cleared. Alas, doing just that much doesn't work, because it overlooks what turned out to be the much subtler problems that were fixed earlier, and described below. We do clear all weakrefs to CT now before breaking cycles, but not all callbacks encountered can be run later. That's explained in horrid detail below. Older text follows, with a some later comments in [] brackets: Before 2.3.3 ============ Before 2.3.3, Python's cyclic gc didn't pay any attention to weakrefs. Segfaults in Zope3 resulted. weakrefs in Python are designed to, at worst, let *other* objects learn that a given object has died, via a callback function. The weakly referenced object itself is not passed to the callback, and the presumption is that the weakly referenced object is unreachable trash at the time the callback is invoked. That's usually true, but not always. Suppose a weakly referenced object becomes part of a clump of cyclic trash. When enough cycles are broken by cyclic gc that the object is reclaimed, the callback is invoked. If it's possible for the callback to get at objects in the cycle(s), then it may be possible for those objects to access (via strong references in the cycle) the weakly referenced object being torn down, or other objects in the cycle that have already suffered a tp_clear() call. There's no guarantee that an object is in a sane state after tp_clear(). Bad things (including segfaults) can happen right then, during the callback's execution, or can happen at any later time if the callback manages to resurrect an insane object. [That missed that, in addition, a weakref to CT can exist outside CT, and any callback into Python can use such a non-CT weakref to resurrect its CT referent. The same bad kinds of things can happen then.] Note that if it's possible for the callback to get at objects in the trash cycles, it must also be the case that the callback itself is part of the trash cycles. Else the callback would have acted as an external root to the current collection, and nothing reachable from it would be in cyclic trash either. [Except that a non-CT callback can also use a non-CT weakref to get at CT objects.] More, if the callback itself is in cyclic trash, then the weakref to which the callback is attached must also be trash, and for the same kind of reason: if the weakref acted as an external root, then the callback could not have been cyclic trash. So a problem here requires that a weakref, that weakref's callback, and the weakly referenced object, all be in cyclic trash at the same time. This isn't easy to stumble into by accident while Python is running, and, indeed, it took quite a while to dream up failing test cases. Zope3 saw segfaults during shutdown, during the second call of gc in Py_Finalize, after most modules had been torn down. That creates many trash cycles (esp. those involving classes), making the problem much more likely. Once you know what's required to provoke the problem, though, it's easy to create tests that segfault before shutdown. In 2.3.3, before breaking cycles, we first clear all the weakrefs with callbacks in cyclic trash. Since the weakrefs *are* trash, and there's no defined-- or even predictable --order in which tp_clear() gets called on cyclic trash, it's defensible to first clear weakrefs with callbacks. It's a feature of Python's weakrefs too that when a weakref goes away, the callback (if any) associated with it is thrown away too, unexecuted. [In 2.4/2.3.5, we first clear all weakrefs to CT objects, whether or not those weakrefs are themselves CT, and whether or not they have callbacks. The callbacks (if any) on non-CT weakrefs (if any) are invoked later, after all weakrefs-to-CT have been cleared. The callbacks (if any) on CT weakrefs (if any) are never invoked, for the excruciating reasons explained here.] Just that much is almost enough to prevent problems, by throwing away *almost* all the weakref callbacks that could get triggered by gc. The problem remaining is that clearing a weakref with a callback decrefs the callback object, and the callback object may *itself* be weakly referenced, via another weakref with another callback. So the process of clearing weakrefs can trigger callbacks attached to other weakrefs, and those latter weakrefs may or may not be part of cyclic trash. So, to prevent any Python code from running while gc is invoking tp_clear() on all the objects in cyclic trash, [That was always wrong: we can't stop Python code from running when gc is breaking cycles. If an object with a __del__ method is not itself in a cycle, but is reachable only from CT, then breaking cycles will, as a matter of course, drop the refcount on that object to 0, and its __del__ will run right then. What we can and must stop is running any Python code that could access CT.] it's not quite enough just to invoke tp_clear() on weakrefs with callbacks first. Instead the weakref module grew a new private function (_PyWeakref_ClearRef) that does only part of tp_clear(): it removes the weakref from the weakly-referenced object's list of weakrefs, but does not decref the callback object. So calling _PyWeakref_ClearRef(wr) ensures that wr's callback object will never trigger, and (unlike weakref's tp_clear()) also prevents any callback associated *with* wr's callback object from triggering. [Although we may trigger such callbacks later, as explained below.] Then we can call tp_clear on all the cyclic objects and never trigger Python code. [As above, not so: it means never trigger Python code that can access CT.] After we do that, the callback objects still need to be decref'ed. Callbacks (if any) *on* the callback objects that were also part of cyclic trash won't get invoked, because we cleared all trash weakrefs with callbacks at the start. Callbacks on the callback objects that were not part of cyclic trash acted as external roots to everything reachable from them, so nothing reachable from them was part of cyclic trash, so gc didn't do any damage to objects reachable from them, and it's safe to call them at the end of gc. [That's so. In addition, now we also invoke (if any) the callbacks on non-CT weakrefs to CT objects, during the same pass that decrefs the callback objects.] An alternative would have been to treat objects with callbacks like objects with __del__ methods, refusing to collect them, appending them to gc.garbage instead. That would have been much easier. Jim Fulton gave a strong argument against that (on Python-Dev): There's a big difference between __del__ and weakref callbacks. The __del__ method is "internal" to a design. When you design a class with a del method, you know you have to avoid including the class in cycles. Now, suppose you have a design that makes has no __del__ methods but that does use cyclic data structures. You reason about the design, run tests, and convince yourself you don't have a leak. Now, suppose some external code creates a weakref to one of your objects. All of a sudden, you start leaking. You can look at your code all you want and you won't find a reason for the leak. IOW, a class designer can out-think __del__ problems, but has no control over who creates weakrefs to his classes or class instances. The class user has little chance either of predicting when the weakrefs he creates may end up in cycles. Callbacks on weakref callbacks are executed in an arbitrary order, and that's not good (a primary reason not to collect cycles with objects with __del__ methods is to avoid running finalizers in an arbitrary order). However, a weakref callback on a weakref callback has got to be rare. It's possible to do such a thing, so gc has to be robust against it, but I doubt anyone has done it outside the test case I wrote for it. [The callbacks (if any) on non-CT weakrefs to CT objects are also executed in an arbitrary order now. But they were before too, depending on the vagaries of when tp_clear() happened to break enough cycles to trigger them. People simply shouldn't try to use __del__ or weakref callbacks to do fancy stuff.]