/
githubmirror
/
cpython
Обзор
Документация
Войти
/
githubmirror
/
cpython
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v3.13.12
Doc/library/string.rst
964 строки
42 KB
Miss Islington (bot)
[3.13] gh-142019: Add description about the exponent of result formatted with presentation type 'e' (GH-142084) (#142814)
16 дек 2025, 15:02
Не верифицирован
16 дек 2025, 15:02
8f25661
Код
Авторство
О чём код?
:mod:`!string` --- Common string operations =========================================== .. module:: string :synopsis: Common string operations. **Source code:** :source:`Lib/string.py` -------------- .. seealso:: :ref:`textseq` :ref:`string-methods` String constants ---------------- The constants defined in this module are: .. data:: ascii_letters The concatenation of the :const:`ascii_lowercase` and :const:`ascii_uppercase` constants described below. This value is not locale-dependent. .. data:: ascii_lowercase The lowercase letters ``'abcdefghijklmnopqrstuvwxyz'``. This value is not locale-dependent and will not change. .. data:: ascii_uppercase The uppercase letters ``'ABCDEFGHIJKLMNOPQRSTUVWXYZ'``. This value is not locale-dependent and will not change. .. data:: digits The string ``'0123456789'``. .. data:: hexdigits The string ``'0123456789abcdefABCDEF'``. .. data:: octdigits The string ``'01234567'``. .. data:: punctuation String of ASCII characters which are considered punctuation characters in the ``C`` locale: ``!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~``. .. data:: printable String of ASCII characters which are considered printable by Python. This is a combination of :const:`digits`, :const:`ascii_letters`, :const:`punctuation`, and :const:`whitespace`. .. note:: By design, :meth:`string.printable.isprintable() <str.isprintable>` returns :const:`False`. In particular, ``string.printable`` is not printable in the POSIX sense (see :manpage:`LC_CTYPE <locale(5)>`). .. data:: whitespace A string containing all ASCII characters that are considered whitespace. This includes the characters space, tab, linefeed, return, formfeed, and vertical tab. .. _string-formatting: Custom String Formatting ------------------------ The built-in string class provides the ability to do complex variable substitutions and value formatting via the :meth:`~str.format` method described in :pep:`3101`. The :class:`Formatter` class in the :mod:`string` module allows you to create and customize your own string formatting behaviors using the same implementation as the built-in :meth:`~str.format` method. .. class:: Formatter The :class:`Formatter` class has the following public methods: .. method:: format(format_string, /, *args, **kwargs) The primary API method. It takes a format string and an arbitrary set of positional and keyword arguments. It is just a wrapper that calls :meth:`vformat`. .. versionchanged:: 3.7 A format string argument is now :ref:`positional-only <positional-only_parameter>`. .. method:: vformat(format_string, args, kwargs) This function does the actual work of formatting. It is exposed as a separate function for cases where you want to pass in a predefined dictionary of arguments, rather than unpacking and repacking the dictionary as individual arguments using the ``*args`` and ``**kwargs`` syntax. :meth:`vformat` does the work of breaking up the format string into character data and replacement fields. It calls the various methods described below. In addition, the :class:`Formatter` defines a number of methods that are intended to be replaced by subclasses: .. method:: parse(format_string) Loop over the format_string and return an iterable of tuples (*literal_text*, *field_name*, *format_spec*, *conversion*). This is used by :meth:`vformat` to break the string into either literal text, or replacement fields. The values in the tuple conceptually represent a span of literal text followed by a single replacement field. If there is no literal text (which can happen if two replacement fields occur consecutively), then *literal_text* will be a zero-length string. If there is no replacement field, then the values of *field_name*, *format_spec* and *conversion* will be ``None``. .. method:: get_field(field_name, args, kwargs) Given *field_name* as returned by :meth:`parse` (see above), convert it to an object to be formatted. Returns a tuple (obj, used_key). The default version takes strings of the form defined in :pep:`3101`, such as "0[name]" or "label.title". *args* and *kwargs* are as passed in to :meth:`vformat`. The return value *used_key* has the same meaning as the *key* parameter to :meth:`get_value`. .. method:: get_value(key, args, kwargs) Retrieve a given field value. The *key* argument will be either an integer or a string. If it is an integer, it represents the index of the positional argument in *args*; if it is a string, then it represents a named argument in *kwargs*. The *args* parameter is set to the list of positional arguments to :meth:`vformat`, and the *kwargs* parameter is set to the dictionary of keyword arguments. For compound field names, these functions are only called for the first component of the field name; subsequent components are handled through normal attribute and indexing operations. So for example, the field expression '0.name' would cause :meth:`get_value` to be called with a *key* argument of 0. The ``name`` attribute will be looked up after :meth:`get_value` returns by calling the built-in :func:`getattr` function. If the index or keyword refers to an item that does not exist, then an :exc:`IndexError` or :exc:`KeyError` should be raised. .. method:: check_unused_args(used_args, args, kwargs) Implement checking for unused arguments if desired. The arguments to this function is the set of all argument keys that were actually referred to in the format string (integers for positional arguments, and strings for named arguments), and a reference to the *args* and *kwargs* that was passed to vformat. The set of unused args can be calculated from these parameters. :meth:`check_unused_args` is assumed to raise an exception if the check fails. .. method:: format_field(value, format_spec) :meth:`format_field` simply calls the global :func:`format` built-in. The method is provided so that subclasses can override it. .. method:: convert_field(value, conversion) Converts the value (returned by :meth:`get_field`) given a conversion type (as in the tuple returned by the :meth:`parse` method). The default version understands 's' (str), 'r' (repr) and 'a' (ascii) conversion types. .. _formatstrings: Format String Syntax -------------------- The :meth:`str.format` method and the :class:`Formatter` class share the same syntax for format strings (although in the case of :class:`Formatter`, subclasses can define their own format string syntax). The syntax is related to that of :ref:`formatted string literals <f-strings>`, but it is less sophisticated and, in particular, does not support arbitrary expressions. .. index:: single: {} (curly brackets); in string formatting single: . (dot); in string formatting single: [] (square brackets); in string formatting single: ! (exclamation); in string formatting single: : (colon); in string formatting Format strings contain "replacement fields" surrounded by curly braces ``{}``. Anything that is not contained in braces is considered literal text, which is copied unchanged to the output. If you need to include a brace character in the literal text, it can be escaped by doubling: ``{{`` and ``}}``. The grammar for a replacement field is as follows: .. productionlist:: format-string replacement_field: "{" [`field_name`] ["!" `conversion`] [":" `format_spec`] "}" field_name: `arg_name` ("." `attribute_name` | "[" `element_index` "]")* arg_name: [`~python-grammar:identifier` | `~python-grammar:digit`+] attribute_name: `~python-grammar:identifier` element_index: `~python-grammar:digit`+ | `index_string` index_string: <any source character except "]"> + conversion: "r" | "s" | "a" format_spec: `format-spec:format_spec` In less formal terms, the replacement field can start with a *field_name* that specifies the object whose value is to be formatted and inserted into the output instead of the replacement field. The *field_name* is optionally followed by a *conversion* field, which is preceded by an exclamation point ``'!'``, and a *format_spec*, which is preceded by a colon ``':'``. These specify a non-default format for the replacement value. See also the :ref:`formatspec` section. The *field_name* itself begins with an *arg_name* that is either a number or a keyword. If it's a number, it refers to a positional argument, and if it's a keyword, it refers to a named keyword argument. An *arg_name* is treated as a number if a call to :meth:`str.isdecimal` on the string would return true. If the numerical arg_names in a format string are 0, 1, 2, ... in sequence, they can all be omitted (not just some) and the numbers 0, 1, 2, ... will be automatically inserted in that order. Because *arg_name* is not quote-delimited, it is not possible to specify arbitrary dictionary keys (e.g., the strings ``'10'`` or ``':-]'``) within a format string. The *arg_name* can be followed by any number of index or attribute expressions. An expression of the form ``'.name'`` selects the named attribute using :func:`getattr`, while an expression of the form ``'[index]'`` does an index lookup using :meth:`~object.__getitem__`. .. versionchanged:: 3.1 The positional argument specifiers can be omitted for :meth:`str.format`, so ``'{} {}'.format(a, b)`` is equivalent to ``'{0} {1}'.format(a, b)``. .. versionchanged:: 3.4 The positional argument specifiers can be omitted for :class:`Formatter`. Some simple format string examples:: "First, thou shalt count to {0}" # References first positional argument "Bring me a {}" # Implicitly references the first positional argument "From {} to {}" # Same as "From {0} to {1}" "My quest is {name}" # References keyword argument 'name' "Weight in tons {0.weight}" # 'weight' attribute of first positional arg "Units destroyed: {players[0]}" # First element of keyword argument 'players'. The *conversion* field causes a type coercion before formatting. Normally, the job of formatting a value is done by the :meth:`~object.__format__` method of the value itself. However, in some cases it is desirable to force a type to be formatted as a string, overriding its own definition of formatting. By converting the value to a string before calling :meth:`~object.__format__`, the normal formatting logic is bypassed. Three conversion flags are currently supported: ``'!s'`` which calls :func:`str` on the value, ``'!r'`` which calls :func:`repr` and ``'!a'`` which calls :func:`ascii`. Some examples:: "Harold's a clever {0!s}" # Calls str() on the argument first "Bring out the holy {name!r}" # Calls repr() on the argument first "More {!a}" # Calls ascii() on the argument first The *format_spec* field contains a specification of how the value should be presented, including such details as field width, alignment, padding, decimal precision and so on. Each value type can define its own "formatting mini-language" or interpretation of the *format_spec*. Most built-in types support a common formatting mini-language, which is described in the next section. A *format_spec* field can also include nested replacement fields within it. These nested replacement fields may contain a field name, conversion flag and format specification, but deeper nesting is not allowed. The replacement fields within the format_spec are substituted before the *format_spec* string is interpreted. This allows the formatting of a value to be dynamically specified. See the :ref:`formatexamples` section for some examples. .. _formatspec: Format Specification Mini-Language ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ "Format specifications" are used within replacement fields contained within a format string to define how individual values are presented (see :ref:`formatstrings` and :ref:`f-strings`). They can also be passed directly to the built-in :func:`format` function. Each formattable type may define how the format specification is to be interpreted. Most built-in types implement the following options for format specifications, although some of the formatting options are only supported by the numeric types. A general convention is that an empty format specification produces the same result as if you had called :func:`str` on the value. A non-empty format specification typically modifies the result. The general form of a *standard format specifier* is: .. productionlist:: format-spec format_spec: [`options`][`width`][`grouping`]["." `precision`][`type`] options: [[`fill`]`align`][`sign`]["z"]["#"]["0"] fill: <any character> align: "<" | ">" | "=" | "^" sign: "+" | "-" | " " width: `~python-grammar:digit`+ grouping: "," | "_" precision: `~python-grammar:digit`+ type: "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g" : | "G" | "n" | "o" | "s" | "x" | "X" | "%" If a valid *align* value is specified, it can be preceded by a *fill* character that can be any character and defaults to a space if omitted. It is not possible to use a literal curly brace ("``{``" or "``}``") as the *fill* character in a :ref:`formatted string literal <f-strings>` or when using the :meth:`str.format` method. However, it is possible to insert a curly brace with a nested replacement field. This limitation doesn't affect the :func:`format` function. The meaning of the various alignment options is as follows: .. index:: single: < (less); in string formatting single: > (greater); in string formatting single: = (equals); in string formatting single: ^ (caret); in string formatting +---------+----------------------------------------------------------+ | Option | Meaning | +=========+==========================================================+ | ``'<'`` | Forces the field to be left-aligned within the available | | | space (this is the default for most objects). | +---------+----------------------------------------------------------+ | ``'>'`` | Forces the field to be right-aligned within the | | | available space (this is the default for numbers). | +---------+----------------------------------------------------------+ | ``'='`` | Forces the padding to be placed after the sign (if any) | | | but before the digits. This is used for printing fields | | | in the form '+000000120'. This alignment option is only | | | valid for numeric types, excluding :class:`complex`. | | | It becomes the default for numbers when '0' immediately | | | precedes the field width. | +---------+----------------------------------------------------------+ | ``'^'`` | Forces the field to be centered within the available | | | space. | +---------+----------------------------------------------------------+ Note that unless a minimum field width is defined, the field width will always be the same size as the data to fill it, so that the alignment option has no meaning in this case. The *sign* option is only valid for number types, and can be one of the following: .. index:: single: + (plus); in string formatting single: - (minus); in string formatting single: space; in string formatting +---------+----------------------------------------------------------+ | Option | Meaning | +=========+==========================================================+ | ``'+'`` | Indicates that a sign should be used for both | | | positive as well as negative numbers. | +---------+----------------------------------------------------------+ | ``'-'`` | Indicates that a sign should be used only for negative | | | numbers (this is the default behavior). | +---------+----------------------------------------------------------+ | space | Indicates that a leading space should be used on | | | positive numbers, and a minus sign on negative numbers. | +---------+----------------------------------------------------------+ .. index:: single: z; in string formatting The ``'z'`` option coerces negative zero floating-point values to positive zero after rounding to the format precision. This option is only valid for floating-point presentation types. .. versionchanged:: 3.11 Added the ``'z'`` option (see also :pep:`682`). .. index:: single: # (hash); in string formatting The ``'#'`` option causes the "alternate form" to be used for the conversion. The alternate form is defined differently for different types. This option is only valid for integer, float and complex types. For integers, when binary, octal, or hexadecimal output is used, this option adds the respective prefix ``'0b'``, ``'0o'``, ``'0x'``, or ``'0X'`` to the output value. For float and complex the alternate form causes the result of the conversion to always contain a decimal-point character, even if no digits follow it. Normally, a decimal-point character appears in the result of these conversions only if a digit follows it. In addition, for ``'g'`` and ``'G'`` conversions, trailing zeros are not removed from the result. The *width* is a decimal integer defining the minimum total field width, including any prefixes, separators, and other formatting characters. If not specified, then the field width will be determined by the content. When no explicit alignment is given, preceding the *width* field by a zero (``'0'``) character enables sign-aware zero-padding for numeric types, excluding :class:`complex`. This is equivalent to a *fill* character of ``'0'`` with an *alignment* type of ``'='``. .. versionchanged:: 3.10 Preceding the *width* field by ``'0'`` no longer affects the default alignment for strings. The *grouping* option after the *width* field specifies a digit group separator for the integral part of a number. It can be one of the following: .. index:: single: , (comma); in string formatting single: _ (underscore); in string formatting +---------+----------------------------------------------------------+ | Option | Meaning | +=========+==========================================================+ | ``','`` | Inserts a comma every 3 digits for | | | integer presentation type ``'d'`` and | | | floating-point presentation types, excluding ``'n'``. | | | For other presentation types, | | | this option is not supported. | +---------+----------------------------------------------------------+ | ``'_'`` | Inserts an underscore every 3 digits for | | | integer presentation type ``'d'`` and | | | floating-point presentation types, excluding ``'n'``. | | | For integer presentation types | | | ``'b'``, ``'o'``, ``'x'``, and ``'X'``, | | | underscores are inserted every 4 digits. | | | For other presentation types, | | | this option is not supported. | +---------+----------------------------------------------------------+ For a locale aware separator, use the ``'n'`` presentation type instead. .. versionchanged:: 3.1 Added the ``','`` option (see also :pep:`378`). .. versionchanged:: 3.6 Added the ``'_'`` option (see also :pep:`515`). The *precision* is a decimal integer indicating how many digits should be displayed after the decimal point for presentation types ``'f'`` and ``'F'``, or before and after the decimal point for presentation types ``'g'`` or ``'G'``. For string presentation types the field indicates the maximum field size - in other words, how many characters will be used from the field content. The *precision* is not allowed for integer presentation types. Finally, the *type* determines how the data should be presented. The available string presentation types are: +---------+----------------------------------------------------------+ | Type | Meaning | +=========+==========================================================+ | ``'s'`` | String format. This is the default type for strings and | | | may be omitted. | +---------+----------------------------------------------------------+ | None | The same as ``'s'``. | +---------+----------------------------------------------------------+ The available integer presentation types are: +---------+----------------------------------------------------------+ | Type | Meaning | +=========+==========================================================+ | ``'b'`` | Binary format. Outputs the number in base 2. | +---------+----------------------------------------------------------+ | ``'c'`` | Character. Converts the integer to the corresponding | | | unicode character before printing. | +---------+----------------------------------------------------------+ | ``'d'`` | Decimal Integer. Outputs the number in base 10. | +---------+----------------------------------------------------------+ | ``'o'`` | Octal format. Outputs the number in base 8. | +---------+----------------------------------------------------------+ | ``'x'`` | Hex format. Outputs the number in base 16, using | | | lower-case letters for the digits above 9. | +---------+----------------------------------------------------------+ | ``'X'`` | Hex format. Outputs the number in base 16, using | | | upper-case letters for the digits above 9. | | | In case ``'#'`` is specified, the prefix ``'0x'`` will | | | be upper-cased to ``'0X'`` as well. | +---------+----------------------------------------------------------+ | ``'n'`` | Number. This is the same as ``'d'``, except that it uses | | | the current locale setting to insert the appropriate | | | digit group separators. | +---------+----------------------------------------------------------+ | None | The same as ``'d'``. | +---------+----------------------------------------------------------+ In addition to the above presentation types, integers can be formatted with the floating-point presentation types listed below (except ``'n'`` and ``None``). When doing so, :func:`float` is used to convert the integer to a floating-point number before formatting. The available presentation types for :class:`float` and :class:`~decimal.Decimal` values are: +---------+----------------------------------------------------------+ | Type | Meaning | +=========+==========================================================+ | ``'e'`` | Scientific notation. For a given precision ``p``, | | | formats the number in scientific notation with the | | | letter 'e' separating the coefficient from the exponent. | | | The coefficient has one digit before and ``p`` digits | | | after the decimal point, for a total of ``p + 1`` | | | significant digits. With no precision given, uses a | | | precision of ``6`` digits after the decimal point for | | | :class:`float`, and shows all coefficient digits | | | for :class:`~decimal.Decimal`. If ``p=0``, the decimal | | | point is omitted unless the ``#`` option is used. | | | | | | For :class:`float`, the exponent always contains at | | | least two digits, and is zero if the value is zero. | +---------+----------------------------------------------------------+ | ``'E'`` | Scientific notation. Same as ``'e'`` except it uses | | | an upper case 'E' as the separator character. | +---------+----------------------------------------------------------+ | ``'f'`` | Fixed-point notation. For a given precision ``p``, | | | formats the number as a decimal number with exactly | | | ``p`` digits following the decimal point. With no | | | precision given, uses a precision of ``6`` digits after | | | the decimal point for :class:`float`, and uses a | | | precision large enough to show all coefficient digits | | | for :class:`~decimal.Decimal`. If ``p=0``, the decimal | | | point is omitted unless the ``#`` option is used. | +---------+----------------------------------------------------------+ | ``'F'`` | Fixed-point notation. Same as ``'f'``, but converts | | | ``nan`` to ``NAN`` and ``inf`` to ``INF``. | +---------+----------------------------------------------------------+ | ``'g'`` | General format. For a given precision ``p >= 1``, | | | this rounds the number to ``p`` significant digits and | | | then formats the result in either fixed-point format | | | or in scientific notation, depending on its magnitude. | | | A precision of ``0`` is treated as equivalent to a | | | precision of ``1``. | | | | | | The precise rules are as follows: suppose that the | | | result formatted with presentation type ``'e'`` and | | | precision ``p-1`` would have exponent ``exp``. Then, | | | if ``m <= exp < p``, where ``m`` is -4 for floats and -6 | | | for :class:`Decimals <decimal.Decimal>`, the number is | | | formatted with presentation type ``'f'`` and precision | | | ``p-1-exp``. Otherwise, the number is formatted | | | with presentation type ``'e'`` and precision ``p-1``. | | | In both cases insignificant trailing zeros are removed | | | from the significand, and the decimal point is also | | | removed if there are no remaining digits following it, | | | unless the ``'#'`` option is used. | | | | | | With no precision given, uses a precision of ``6`` | | | significant digits for :class:`float`. For | | | :class:`~decimal.Decimal`, the coefficient of the result | | | is formed from the coefficient digits of the value; | | | scientific notation is used for values smaller than | | | ``1e-6`` in absolute value and values where the place | | | value of the least significant digit is larger than 1, | | | and fixed-point notation is used otherwise. | | | | | | Positive and negative infinity, positive and negative | | | zero, and nans, are formatted as ``inf``, ``-inf``, | | | ``0``, ``-0`` and ``nan`` respectively, regardless of | | | the precision. | +---------+----------------------------------------------------------+ | ``'G'`` | General format. Same as ``'g'`` except switches to | | | ``'E'`` if the number gets too large. The | | | representations of infinity and NaN are uppercased, too. | +---------+----------------------------------------------------------+ | ``'n'`` | Number. This is the same as ``'g'``, except that it uses | | | the current locale setting to insert the appropriate | | | digit group separators | | | for the integral part of a number. | +---------+----------------------------------------------------------+ | ``'%'`` | Percentage. Multiplies the number by 100 and displays | | | in fixed (``'f'``) format, followed by a percent sign. | +---------+----------------------------------------------------------+ | None | For :class:`float` this is like the ``'g'`` type, except | | | that when fixed-point notation is used to format the | | | result, it always includes at least one digit past the | | | decimal point, and switches to the scientific notation | | | when ``exp >= p - 1``. When the precision is not | | | specified, the latter will be as large as needed to | | | represent the given value faithfully. | | | | | | For :class:`~decimal.Decimal`, this is the same as | | | either ``'g'`` or ``'G'`` depending on the value of | | | ``context.capitals`` for the current decimal context. | | | | | | The overall effect is to match the output of :func:`str` | | | as altered by the other format modifiers. | +---------+----------------------------------------------------------+ The result should be correctly rounded to a given precision ``p`` of digits after the decimal point. The rounding mode for :class:`float` matches that of the :func:`round` builtin. For :class:`~decimal.Decimal`, the rounding mode of the current :ref:`context <decimal-context>` will be used. The available presentation types for :class:`complex` are the same as those for :class:`float` (``'%'`` is not allowed). Both the real and imaginary components of a complex number are formatted as floating-point numbers, according to the specified presentation type. They are separated by the mandatory sign of the imaginary part, the latter being terminated by a ``j`` suffix. If the presentation type is missing, the result will match the output of :func:`str` (complex numbers with a non-zero real part are also surrounded by parentheses), possibly altered by other format modifiers. .. _formatexamples: Format examples ^^^^^^^^^^^^^^^ This section contains examples of the :meth:`str.format` syntax and comparison with the old ``%``-formatting. In most of the cases the syntax is similar to the old ``%``-formatting, with the addition of the ``{}`` and with ``:`` used instead of ``%``. For example, ``'%03.2f'`` can be translated to ``'{:03.2f}'``. The new format syntax also supports new and different options, shown in the following examples. Accessing arguments by position:: >>> '{0}, {1}, {2}'.format('a', 'b', 'c') 'a, b, c' >>> '{}, {}, {}'.format('a', 'b', 'c') # 3.1+ only 'a, b, c' >>> '{2}, {1}, {0}'.format('a', 'b', 'c') 'c, b, a' >>> '{2}, {1}, {0}'.format(*'abc') # unpacking argument sequence 'c, b, a' >>> '{0}{1}{0}'.format('abra', 'cad') # arguments' indices can be repeated 'abracadabra' Accessing arguments by name:: >>> 'Coordinates: {latitude}, {longitude}'.format(latitude='37.24N', longitude='-115.81W') 'Coordinates: 37.24N, -115.81W' >>> coord = {'latitude': '37.24N', 'longitude': '-115.81W'} >>> 'Coordinates: {latitude}, {longitude}'.format(**coord) 'Coordinates: 37.24N, -115.81W' Accessing arguments' attributes:: >>> c = 3-5j >>> ('The complex number {0} is formed from the real part {0.real} ' ... 'and the imaginary part {0.imag}.').format(c) 'The complex number (3-5j) is formed from the real part 3.0 and the imaginary part -5.0.' >>> class Point: ... def __init__(self, x, y): ... self.x, self.y = x, y ... def __str__(self): ... return 'Point({self.x}, {self.y})'.format(self=self) ... >>> str(Point(4, 2)) 'Point(4, 2)' Accessing arguments' items:: >>> coord = (3, 5) >>> 'X: {0[0]}; Y: {0[1]}'.format(coord) 'X: 3; Y: 5' Replacing ``%s`` and ``%r``:: >>> "repr() shows quotes: {!r}; str() doesn't: {!s}".format('test1', 'test2') "repr() shows quotes: 'test1'; str() doesn't: test2" Aligning the text and specifying a width:: >>> '{:<30}'.format('left aligned') 'left aligned ' >>> '{:>30}'.format('right aligned') ' right aligned' >>> '{:^30}'.format('centered') ' centered ' >>> '{:*^30}'.format('centered') # use '*' as a fill char '***********centered***********' Replacing ``%+f``, ``%-f``, and ``% f`` and specifying a sign:: >>> '{:+f}; {:+f}'.format(3.14, -3.14) # show it always '+3.140000; -3.140000' >>> '{: f}; {: f}'.format(3.14, -3.14) # show a space for positive numbers ' 3.140000; -3.140000' >>> '{:-f}; {:-f}'.format(3.14, -3.14) # show only the minus -- same as '{:f}; {:f}' '3.140000; -3.140000' Replacing ``%x`` and ``%o`` and converting the value to different bases:: >>> # format also supports binary numbers >>> "int: {0:d}; hex: {0:x}; oct: {0:o}; bin: {0:b}".format(42) 'int: 42; hex: 2a; oct: 52; bin: 101010' >>> # with 0x, 0o, or 0b as prefix: >>> "int: {0:d}; hex: {0:#x}; oct: {0:#o}; bin: {0:#b}".format(42) 'int: 42; hex: 0x2a; oct: 0o52; bin: 0b101010' Using the comma or the underscore as a digit group separator:: >>> '{:,}'.format(1234567890) '1,234,567,890' >>> '{:_}'.format(1234567890) '1_234_567_890' >>> '{:_b}'.format(1234567890) '100_1001_1001_0110_0000_0010_1101_0010' >>> '{:_x}'.format(1234567890) '4996_02d2' Expressing a percentage:: >>> points = 19 >>> total = 22 >>> 'Correct answers: {:.2%}'.format(points/total) 'Correct answers: 86.36%' Using type-specific formatting:: >>> import datetime >>> d = datetime.datetime(2010, 7, 4, 12, 15, 58) >>> '{:%Y-%m-%d %H:%M:%S}'.format(d) '2010-07-04 12:15:58' Nesting arguments and more complex examples:: >>> for align, text in zip('<^>', ['left', 'center', 'right']): ... '{0:{fill}{align}16}'.format(text, fill=align, align=align) ... 'left<<<<<<<<<<<<' '^^^^^center^^^^^' '>>>>>>>>>>>right' >>> >>> octets = [192, 168, 0, 1] >>> '{:02X}{:02X}{:02X}{:02X}'.format(*octets) 'C0A80001' >>> int(_, 16) 3232235521 >>> >>> width = 5 >>> for num in range(5,12): #doctest: +NORMALIZE_WHITESPACE ... for base in 'dXob': ... print('{0:{width}{base}}'.format(num, base=base, width=width), end=' ') ... print() ... 5 5 5 101 6 6 6 110 7 7 7 111 8 8 10 1000 9 9 11 1001 10 A 12 1010 11 B 13 1011 .. _template-strings: Template strings ---------------- Template strings provide simpler string substitutions as described in :pep:`292`. A primary use case for template strings is for internationalization (i18n) since in that context, the simpler syntax and functionality makes it easier to translate than other built-in string formatting facilities in Python. As an example of a library built on template strings for i18n, see the `flufl.i18n <https://flufli18n.readthedocs.io/en/latest/>`_ package. .. index:: single: $ (dollar); in template strings Template strings support ``$``-based substitutions, using the following rules: * ``$$`` is an escape; it is replaced with a single ``$``. * ``$identifier`` names a substitution placeholder matching a mapping key of ``"identifier"``. By default, ``"identifier"`` is restricted to any case-insensitive ASCII alphanumeric string (including underscores) that starts with an underscore or ASCII letter. The first non-identifier character after the ``$`` character terminates this placeholder specification. * ``${identifier}`` is equivalent to ``$identifier``. It is required when valid identifier characters follow the placeholder but are not part of the placeholder, such as ``"${noun}ification"``. Any other appearance of ``$`` in the string will result in a :exc:`ValueError` being raised. The :mod:`string` module provides a :class:`Template` class that implements these rules. The methods of :class:`Template` are: .. class:: Template(template) The constructor takes a single argument which is the template string. .. method:: substitute(mapping={}, /, **kwds) Performs the template substitution, returning a new string. *mapping* is any dictionary-like object with keys that match the placeholders in the template. Alternatively, you can provide keyword arguments, where the keywords are the placeholders. When both *mapping* and *kwds* are given and there are duplicates, the placeholders from *kwds* take precedence. .. method:: safe_substitute(mapping={}, /, **kwds) Like :meth:`substitute`, except that if placeholders are missing from *mapping* and *kwds*, instead of raising a :exc:`KeyError` exception, the original placeholder will appear in the resulting string intact. Also, unlike with :meth:`substitute`, any other appearances of the ``$`` will simply return ``$`` instead of raising :exc:`ValueError`. While other exceptions may still occur, this method is called "safe" because it always tries to return a usable string instead of raising an exception. In another sense, :meth:`safe_substitute` may be anything other than safe, since it will silently ignore malformed templates containing dangling delimiters, unmatched braces, or placeholders that are not valid Python identifiers. .. method:: is_valid() Returns ``False`` if the template has invalid placeholders that will cause :meth:`substitute` to raise :exc:`ValueError`. .. versionadded:: 3.11 .. method:: get_identifiers() Returns a list of the valid identifiers in the template, in the order they first appear, ignoring any invalid identifiers. .. versionadded:: 3.11 :class:`Template` instances also provide one public data attribute: .. attribute:: template This is the object passed to the constructor's *template* argument. In general, you shouldn't change it, but read-only access is not enforced. Here is an example of how to use a Template:: >>> from string import Template >>> s = Template('$who likes $what') >>> s.substitute(who='tim', what='kung pao') 'tim likes kung pao' >>> d = dict(who='tim') >>> Template('Give $who $100').substitute(d) Traceback (most recent call last): ... ValueError: Invalid placeholder in string: line 1, col 11 >>> Template('$who likes $what').substitute(d) Traceback (most recent call last): ... KeyError: 'what' >>> Template('$who likes $what').safe_substitute(d) 'tim likes $what' Advanced usage: you can derive subclasses of :class:`Template` to customize the placeholder syntax, delimiter character, or the entire regular expression used to parse template strings. To do this, you can override these class attributes: * *delimiter* -- This is the literal string describing a placeholder introducing delimiter. The default value is ``$``. Note that this should *not* be a regular expression, as the implementation will call :meth:`re.escape` on this string as needed. Note further that you cannot change the delimiter after class creation (i.e. a different delimiter must be set in the subclass's class namespace). * *idpattern* -- This is the regular expression describing the pattern for non-braced placeholders. The default value is the regular expression ``(?a:[_a-z][_a-z0-9]*)``. If this is given and *braceidpattern* is ``None`` this pattern will also apply to braced placeholders. .. note:: Since default *flags* is ``re.IGNORECASE``, pattern ``[a-z]`` can match with some non-ASCII characters. That's why we use the local ``a`` flag here. .. versionchanged:: 3.7 *braceidpattern* can be used to define separate patterns used inside and outside the braces. * *braceidpattern* -- This is like *idpattern* but describes the pattern for braced placeholders. Defaults to ``None`` which means to fall back to *idpattern* (i.e. the same pattern is used both inside and outside braces). If given, this allows you to define different patterns for braced and unbraced placeholders. .. versionadded:: 3.7 * *flags* -- The regular expression flags that will be applied when compiling the regular expression used for recognizing substitutions. The default value is ``re.IGNORECASE``. Note that ``re.VERBOSE`` will always be added to the flags, so custom *idpattern*\ s must follow conventions for verbose regular expressions. .. versionadded:: 3.2 Alternatively, you can provide the entire regular expression pattern by overriding the class attribute *pattern*. If you do this, the value must be a regular expression object with four named capturing groups. The capturing groups correspond to the rules given above, along with the invalid placeholder rule: * *escaped* -- This group matches the escape sequence, e.g. ``$$``, in the default pattern. * *named* -- This group matches the unbraced placeholder name; it should not include the delimiter in capturing group. * *braced* -- This group matches the brace enclosed placeholder name; it should not include either the delimiter or braces in the capturing group. * *invalid* -- This group matches any other delimiter pattern (usually a single delimiter), and it should appear last in the regular expression. The methods on this class will raise :exc:`ValueError` if the pattern matches the template without one of these named groups matching. Helper functions ---------------- .. function:: capwords(s, sep=None) Split the argument into words using :meth:`str.split`, capitalize each word using :meth:`str.capitalize`, and join the capitalized words using :meth:`str.join`. If the optional second argument *sep* is absent or ``None``, runs of whitespace characters are replaced by a single space and leading and trailing whitespace are removed, otherwise *sep* is used to split and join the words.