/
githubmirror
/
cmssw
Обзор
Документация
Войти
/
githubmirror
/
cmssw
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
Geometry/TrackerCommonData/test/pixel_fwd.in
283 строки
12 KB
Francesca
moved non-xml files to Geometry/TrackerCommonData/test directory
28 янв 2015, 15:46
28 янв 2015, 15:46
278a709
Код
Авторство
О чём код?
PIXEL forward detector ============ @version October 17, 2007 @created Vesna Cuplov (2006) @modified Vesna Cuplov (2007) - Forward pixel Disks and Service cylinder mixtures definitions. - All mixtures for FPix disks were updated in october 2007. (added capacitors, resistors, solders in the HDI and VHDI mixtures..... ) - Mixtures for Service cylinder were fully implemented in october 2007. @modified Vesna Cuplov (2008) New Aluminium density for the Outer Ring volume in order to take into account the non-implemented holes in the Outer Ring. We used the real volume (this volume takes into account the holes in the ring) of the outer ring calculated by G. Derylo. The inner ring material was not implemented with the mixture program because this ring was modified (more holes in it) in order to remove more material. So, to implement the new aluminium density to be used in the simulation, we used the inner ring mass value from the lab measurements and computed the denisty needed to reproduce this mass with a simulated inner ring volume without implemented holes. ..................................................................................... ..................................................................................... Input file for mixture.f Start new mixtures with a '#' in the first column Start the components with a '*' in the first column You can type any kind of comment in as long as you don't start it with '#' or '*' ! ..................................................................... For mixture declaration: Name of Mixture, Name of GMIX for title file, Monte Carlo Volume, MC Area For items in a compound: Item number, Comment, Material (has to be written exactly as in material.input file), Volume, Multiplicity, Type Type is one of the following: SUP for support SEN for sensitive volumes CAB for cables COL for cooling ELE for electronics ..................................................................... 1) BumpBonds+Air layer per ROC area ============================================ ROC dimensions: Length=0.994cm, Width=0.801cm and Thickness=0.0190cm An average of 4160 Bump Bonds (63% Tin and 37% Lead) per ROC Bump Bond size: Length= 0.003cm, Width=0.003cm and Thickness=0.0025cm Volume will be approximatively: V = 0.0000000225 cm^3 The bump bond is made of a material named Bump_Bond. ..................................................................... # "Pixel Forward BumpBond layer per ROC" "Pix_Fwd_Bump" 0.00199 1 * 1 "Bump Bonds" "FPix_TinLeadSolder" 0.0000936 1 ELE 2) VHDI ================================ The total area of VHDI on a blade is 60.5326 cm2 We have one layer of Kapton on 60.5326 cm2 area and thickness of 0.009cm We have Copper only 60% of the volume made by 60.5326 cm2 area and thickness of 0.004cm So the Kapton Volume is 0.5448 cm3 and the Copper Volume is 0.1453 cm3. The total volume of VHDI on a blade is 60.5326 cm2 * 0.009 + 60% * 60.5326* 0.004 = 0.6901 cm3 There are 135 capacitors made of Marium_Titanate. (L=1mm, W=0.5mm and Thickness=0.25mm) There are Solders made of Tin/Lead in proportion of 63/37: Total volume of Solder is: 0.0054 cm3 ..................................................................... # "Pixel Forward VHDI" "Pix_Fwd_VHDI" 0.7124 60.5326 * 1 "VHDI: Kapton" "FPix_Kapton" 0.5448 1 ELE * 2 "VHDI: Copper" "Copper" 0.1453 1 ELE * 3 "Capacitors" "Barium_Titanate" 0.000125 135 ELE * 4 "Solders" "FPix_TinLeadSolder" 0.0054 1 ELE 3) AgEpoxy (also called ChoTherm1680) ============================================ There are 2 places where we put this material: Between VHDI and ROC and Between Plaquette and HDI prom panel. The last bottom layer of a plaquette is made of AgEpoxy and will then be touching the HDI layer of a panel. Greg Derylo called this ChoTherm (the XML file call this Pix_Fwd_AgEpoxy. Description of the layer between VHDI and ROC : Acrylic (Epoxy assumed) V = 0.0895 cm3 BN powder V = 0.0895 cm3 (Boron Nitride powder ~ ceramic) Silicone V = 0.3579 cm3 Polyimide V = 0.0895 cm3 ..................................................................... # "Pixel Forward AgEpoxy VHDI-ROC" "Pix_Fwd_AgEpoxy" 0.6264 1 * 1 "Acrylic is epoxy" "FPix_Epoxy" 0.0895 1 SUP * 2 "BN powder" "FPix_BNPowder" 0.0895 1 SUP * 3 "Silicone" "FPix_Silicone" 0.3579 1 SUP * 4 "Polyimide is kapton" "FPix_Kapton" 0.0895 1 ELE 4) Adhesive Film: 3M 9882 tape ========================== This tape is made of Acrylic (Epoxy assumed) V = 0.2421cm3 and Ceramic (BN powder) V = 0.0605 cm3 ..................................................................... # "Pixel Forward AdhFilm 3M 9882" "Pix_Fwd_AdhFilm" 0.3026 1 * 1 "Acrylic is epoxy" "FPix_Epoxy" 0.2421 1 SUP * 2 "Ceramic" "FPix_BNPowder" 0.0605 1 SUP 5) HDI + other components per blade =============================== HDI on a BLADE (2 panels) is made of: Kapton (0.4278 * 2 cm3), an internal flex adhesive(~epoxy) (0.2139 * 2 cm3), Copper (0.0675 * 2 cm3). There are 8 capacitors made of BaTiO3: V = 0.0019 cm3 There are 9 resistors made of Alumina: V = 0.0022 cm3 There are Solders made of Tin/Lead in proportion of 63/37: Total volume of Solder is: 0.0085 cm3 We also have Bias and Ground Wires: Copper V = 0.0362 cm3 Kapton V = 0.1087 cm3 Solder Tin/Lead (63/37) V = 0.012 cm3 Epoxy V = 0.030 cm3 Indium solders In/Sn (52/48) V = 0.006 cm3 ..................................................................... # "Pixel Forward HDI" "Pix_Fwd_HDI" 1.6232 1 * 1 "Kapton" "FPix_Kapton" 0.8556 1 ELE * 2 "Internal flex adhesive is like epoxy" "FPix_Epoxy" 0.4278 1 SUP * 3 "Copper" "Copper" 0.1349 1 ELE * 4 "Capacitors" "Barium_Titanate" 0.0019 1 ELE * 5 "Resistors" "FPix_Alumina" 0.0022 1 ELE * 6 "Solders" "FPix_TinLeadSolder" 0.0085 1 ELE * 7 "Copper" "Copper" 0.0362 1 ELE * 8 "Kapton" "FPix_Kapton" 0.1087 1 ELE * 9 "Solders" "FPix_TinLeadSolder" 0.012 1 ELE * 10 "Epoxy" "FPix_Epoxy" 0.030 1 SUP * 11 "Solders Indium" "Indium" 0.006 1 ELE 6) Aluminium for inner ring (NO EDGES) =================================== We want a new aluminium density that is used for the inner Ring in order to take into account the holes that are not implemented in the simulation. 18.78 cm3 is the volume of an inner-ring without holes as it is in the simulation. G. Derylo calulated the inner-ring REAL volume (there are many holes in the ring): 13.944 cm3 - 0.624 cm3 (2 x 0.312cm3 = 2 x one inner edge volume) G. Derylo used docDB 506 to get inner and outer ring drawing numbers and then pulled the 3D part models out of the library and used the CAD software to calculate the volumes. # "Aluminium for inner ring" "Aluminium_InnerRing" 18.78 1 * 1 "Aluminium" "Aluminium" 13.32 1 SUP 7) Aluminium for outer ring (NO EDGES) =================================== We want a new aluminium density that is used for the outer Ring in order to take into account the holes in the outer ring that are not implemented in the simulation. 58.572 cm3 is the volume of an outer-ring without holes as it is in the simulation. G. Derylo calulated the outer-ring REAL volume (there are many holes in the ring): 41.446 cm3 - 2 cm3 (2 x 1cm3 = 2 x one outer edge volume ) # "Aluminium for outer ring" "Aluminium_OuterRing" 58.572 1 * 1 "Aluminium" "Aluminium" 39.446 1 SUP 8) DC DC converter material (pilot) =================================== We want to simulate the DC-DC converters for powering the pilot electronics. 1.5236 cm3 is the volume of a DC-DC converter as it is in the simulation. # "DC DC converter material" "Pix_Fwd_DCDC_Converter" 24.4968 1 * 1 "DCDC: Copper" "Copper" 0.4752 1 ELE * 2 "DCDC: G10" "FPix_Cylind_G10" 16.4536 1 SUP * 3 "DCDC: Kapton" "FPix_Kapton" 0.1071 1 CAB * 4 "DCDC: Polyester" "FPix_Cylind_Polyester" 3.5259 1 CAB * 5 "DCDC: Solder" "FPix_TinLeadSolder" 0.009041 1 ELE * 6 "DCDC: Cooling finger" "Aluminium" 3.9259 1 CAB 9) DOH material (pilot) =================================== We want to simulate the DOH added for the pilot system. 11.6170 cm3 is the volume of a DC-DC converter as it is in the simulation. # "Pilot DOH material" "Pix_Fwd_Pilot_DOH" 11.6170 1 * 1 "DOH: Fiber" "FPix_Cylind_PMMA" 0.7656 1 CAB * 2 "DOH: Isolation" "FPix_Cylind_POLIAX" 10.8513 1 CAB 10) Pilot Cables (pilot) =================================== We want to simulate the various cables added for the pilot system. They will be mimicked by using the composition of the LV power cables (see FPIX DOC DB: 1628-v2) 8.4351 cm3 is the volume of this material as it is in the simulation. # "Pilot cable material" "Pix_Fwd_Pilot_Cables" 5.1784 1 * 1 "Cable: SnCu" "FPix_Cylind_SnCu" 2.4247 1 CAB * 2 "Cable: Isolation" "FPix_Cylind_POLIAX" 2.7537 1 CAB SERVICE CYLINDER MATERIAL (V. Cuplov) ============================================= The following description has been done by B. Gobbi and E. Spencer. See FPix DOC DB: 1628-v2 https://docdb.fnal.gov/CMS-private/DocDB/DocumentDatabase # "Volume 1 " "Pix_Fwd_Servi_Cylind" 8957 1 * 1 "Carbon Fiber" "FPix_Cylind_CF" 1162 1 SUP * 2 "G10" "FPix_Cylind_G10" 26 1 CAB * 3 "Aluminium" "Aluminium" 6 1 SUP * 4 "Ceramic" "Ceramic" 1 1 SUP # "Volume 2 " "Pix_Fwd_End_Flange" 412 1 * 1 "Aluminium for End Flange" "Aluminium" 187 1 SUP * 2 "Aluminium for cooling lines" "Aluminium" 4 1 COL * 3 "SnCu" "FPix_Cylind_SnCu" 11 1 CAB * 4 "Poliax" "FPix_Cylind_POLIAX" 35 1 CAB * 5 "C6F14" "FPix_Cylind_C6F14" 16 1 COL # "Volume 3 " "Pix_Fwd_End_Electro_1" 1139 1 * 1 "SnCu" "FPix_Cylind_SnCu" 13 1 CAB * 2 "G10" "FPix_Cylind_G10" 65 1 CAB * 3 "Poliax" "FPix_Cylind_POLIAX" 39 1 CAB * 4 "Carbon Fiber" "FPix_Cylind_CF" 23 1 SUP * 5 "Copper" "Copper" 2 1 ELE * 6 "Polyester" "FPix_Cylind_Polyester" 5 1 CAB # "Volume 4 " "Pix_Fwd_End_Electro_2" 980 1 * 1 "SnCu" "FPix_Cylind_SnCu" 11 1 CAB * 2 "G10" "FPix_Cylind_G10" 54 1 CAB * 3 "Poliax" "FPix_Cylind_POLIAX" 31 1 CAB * 4 "Carbon Fiber" "FPix_Cylind_CF" 19 1 SUP * 5 "Copper" "Copper" 1 1 ELE * 6 "Polyester" "FPix_Cylind_Polyester" 4 1 CAB # "Volume 5 " "Pix_Fwd_End_Coil_Fiber" 2833 1 * 1 "Polyester" "FPix_Cylind_Polyester" 225 1 CAB * 2 "Poliax" "FPix_Cylind_POLIAX" 122 1 CAB * 3 "G10" "FPix_Cylind_G10" 33 1 SUP * 4 "Noryl" "FPix_Cylind_Noryl" 26 1 SUP * 5 "PMMA" "FPix_Cylind_PMMA" 10 1 CAB # "Volume 6 " "Pix_Fwd_Port_Cards" 332 1 * 1 "G10" "FPix_Cylind_G10" 103 1 ELE * 2 "Copper" "Copper" 11 1 ELE * 3 "Polyimide (extension cable)" "FPix_Kapton" 33 1 CAB * 4 "Port card/ CCU connectors" "FPix_Cylind_Polyester" 12 1 CAB * 5 "Solder" "FPix_TinLeadSolder" 1 1 ELE * 6 "Resistors" "FPix_Alumina" 2 1 ELE * 7 "Capacitors" "Barium_Titanate" 1 1 ELE * 8 "Chips" "Silicon" 1 1 ELE * 9 "OH parts (mostly G10)" "FPix_Cylind_G10" 27 1 ELE # "Volume 7: FRONT " "Pix_Fwd_End_Pipe_1" 477 1 * 1 "SnCu" "FPix_Cylind_SnCu" 74 1 CAB * 2 "C6F14" "FPix_Cylind_C6F14" 214 1 COL * 3 "Aluminium (cooling tube)" "Aluminium" 81 1 COL * 4 "Poliax" "FPix_Cylind_POLIAX" 88 1 CAB # "Volume 8: BACK " "Pix_Fwd_End_Pipe_2" 396 1 * 1 "SnCu" "FPix_Cylind_SnCu" 66 1 CAB * 2 "C6F14" "FPix_Cylind_C6F14" 170 1 COL * 3 "Aluminium (cooling tube)" "Aluminium" 82 1 COL * 4 "Poliax" "FPix_Cylind_POLIAX" 78 1 CAB # "Volume 6.5 " "Pix_Fwd_Port_Cards_Pilot" 461 1 * 1 "G10" "FPix_Cylind_G10" 119.5212 1 ELE * 2 "Copper" "Copper" 12.7644 1 ELE * 3 "Polyimide (extension cable)" "FPix_Kapton" 38.2932 1 CAB * 4 "Port card/ CCU connectors" "FPix_Cylind_Polyester" 13.9248 1 CAB * 5 "Solder" "FPix_TinLeadSolder" 1.1604 1 ELE * 6 "Resistors" "FPix_Alumina" 2.3208 1 ELE * 7 "Capacitors" "Barium_Titanate" 1.1604 1 ELE * 8 "Chips" "Silicon" 1.1604 1 ELE * 9 "OH parts (mostly G10)" "FPix_Cylind_G10" 31.3308 1 ELE * 10 "Pilot DOH" "Pix_Fwd_Pilot_DOH" 23.2341 1 ELE * 11 "Pilot Cabling" "Pix_Fwd_Pilot_Cables" 5.1784 1 CAB * 12 "DCDC converter" "Pix_Fwd_DCDC_Converter" 24.6527 1 ELE # "END" "END" 0. 0. this has to be the last line !