Geometry/ForwardCommonData/data/Run2/castor.xml - master - githubmirror/cmssw

Geometry/ForwardCommonData/data/Run2/castor.xml
1 066 строк48 KB
Ianna Osborne
* Remove Tracker overlap with Beampipe
06 окт 2016, 17:54
06 окт 2016, 17:549e6b513
<?xml version="1.0"?>
<DDDefinition xmlns="http://www.cern.ch/cms/DDL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.cern.ch/cms/DDL ../../../DetectorDescription/Schema/DDLSchema.xsd">
    <ConstantsSection label="castor.xml" eval="true">
        <Constant name="castLength" value="1583.3*mm" />
        <Constant name="CASTFarTiltAngle" value="0*deg" />
        <Constant name="CASTNearTiltAngle" value="0*deg" />
	<Constant name="LGAngleBegin" value="11.6287*deg"/>
	<Constant name="LGAngleDelta" value="21.74255*deg"/>
	<Constant name="LGrShift" value="1*mm/tan([castor:LGAngleDelta]/2)"/>
	<Constant name="LGxShift" value="[castor:LGrShift] * cos([castor:LGAngleBegin]+[castor:LGAngleDelta]/2)"/>
	<Constant name="LGyShift" value="[castor:LGrShift] * sin([castor:LGAngleBegin]+[castor:LGAngleDelta]/2)"/>
    </ConstantsSection>
    <RotationSection label="castor.xml">
        <Rotation name="CASTFarTilt"  thetaX="90*deg+[CASTFarTiltAngle]" phiX="0*deg" thetaY="90*deg" phiY="90*deg" thetaZ="0*deg+[CASTFarTiltAngle]" phiZ="0*deg" />
        <Rotation name="CASTNearTilt" thetaX="90*deg+[CASTNearTiltAngle]" phiX="0*deg" thetaY="90*deg" phiY="90*deg" thetaZ="0*deg+[CASTNearTiltAngle]" phiZ="0*deg" />
	<!-- Rotations for the subtraction boxes SubtractBox1/2 used to cut the high-eta edges of the volumes CAEL, CAEA, CAEF, CAHL, CAHA CAHF -->
	<Rotation name="SubtractBoxRot1" 
		  thetaX ="90*deg" phiX="(22.5+33.75)*deg" 
		  thetaY="90*deg" phiY="(90+22.5+33.75)*deg" 
		  thetaZ="0*deg" phiZ="0*deg"/>
	<Rotation name="SubtractBoxRot2" 
		  thetaX ="90*deg" phiX="(22.5-33.75)*deg" 
		  thetaY="90*deg" phiY="(90+22.5-33.75)*deg" 
		  thetaZ="0*deg" phiZ="0*deg"/>
    </RotationSection>
    <SolidSection label="castor.xml">
        <!--  -->
        <!-- main CASTOR volume  -->
        <!--  -->
        <Polyhedra name="CASTFar" numSide="4" startPhi="-90.0*deg" deltaPhi="180.0*deg" >
            <ZSection rMin="39.00*mm"   rMax="40.00*mm"    z="0.0*mm" />
            <ZSection rMin="39.00*mm"   rMax="303.20*mm"   z="263.2*mm" />
            <ZSection rMin="39.00*mm"   rMax="303.20*mm"   z="1320.1*mm" />
            <ZSection rMin="303.20*mm"  rMax="303.20*mm"   z="[castLength]" />
        </Polyhedra>
        <Polyhedra name="CASTNear" numSide="4" startPhi="90.0*deg" deltaPhi="180.0*deg" >
            <ZSection rMin="39.00*mm"   rMax="40.00*mm"    z="0.0*mm" />
            <ZSection rMin="39.00*mm"   rMax="303.20*mm"   z="263.2*mm" />
            <ZSection rMin="39.00*mm"   rMax="303.20*mm"   z="1320.1*mm" />
            <ZSection rMin="303.20*mm"  rMax="303.20*mm"   z="[castLength]" />
        </Polyhedra>
        <Polyhedra name="CAST" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="39.00*mm" rMax="40.00*mm" z="0.0*mm"/>
            <ZSection rMin="39.00*mm" rMax="303.20*mm" z="263.2*mm"/>
            <ZSection rMin="39.00*mm" rMax="303.20*mm" z="1320.1*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="[castLength]"/>
        </Polyhedra>
        <!--  -->
        <!--  -->
        <!-- 5mm Aluminium, separating EM + H sections -->
        <Polyhedra name="CAAI" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.0*mm"/>
            <ZSection rMin="40.00*mm" rMax="45.00*mm" z="5.0*mm"/>
            <ZSection rMin="139.50*mm" rMax="144.50*mm" z="104.5*mm"/>
            <ZSection rMin="144.50*mm" rMax="144.50*mm" z="109.5*mm"/>
        </Polyhedra>
        <!--  -->
        <!-- START OF ELECTROMAGNETIC CALO  -->
        <!--  CASC - StainlessSteel -->
        <Polyhedra name="CAEC" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.00*mm"/>
            <ZSection rMin="40.00*mm" rMax="143.00*mm" z="103.00*mm"/>
            <ZSection rMin="40.50*mm" rMax="143.50*mm" z="103.50*mm"/>
            <ZSection rMin="143.50*mm" rMax="143.50*mm" z="206.50*mm"/>
        </Polyhedra>
        <!-- to have octant StainlessSteel skeleton to support WQ plates  -->
        <!-- CASS sector - Air, 8 copies with deltaPhi=45.0  -->
        <Polyhedra name="CAES" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.00*mm"/>
            <ZSection rMin="40.00*mm" rMax="143.00*mm" z="103.00*mm"/>
            <ZSection rMin="40.50*mm" rMax="143.50*mm" z="103.50*mm"/>
            <ZSection rMin="143.50*mm" rMax="143.50*mm" z="206.50*mm"/>
        </Polyhedra>
        <!-- EM read-out channel  with StainlessSteel size  1 copy -->
        <Polyhedra name="CAER" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.00*mm"/>
            <ZSection rMin="40.00*mm" rMax="91.50*mm" z="51.50*mm"/>
            <ZSection rMin="92.00*mm" rMax="143.50*mm" z="103.50*mm"/>
            <ZSection rMin="143.50*mm" rMax="143.50*mm" z="155.00*mm"/>
        </Polyhedra>
        <!-- Air volume -->
        <!-- reduced rMin, rMax by (1.mm (StainlessSteel)/tg(22.5)) -1mm = 1.41mm-->
        <!-- the special X,Y shifts are needed to construct a wall thickness of 1mm. -->
        <!-- Start the volume below (1.41mm) and then shift upwards in r by (1.41+1)mm.  -->
	<!-- => wall thickness = deltaR*tan(22.5deg) = 2.41mm*tan(22.5deg) = 1mm --> 
        <!-- Shifts are defined further down the code.  -->
        <!-- the shifts are: x = (2.41)*cos(22.5) = 2.23, y=...*sin(22.5)=0.92  1 copy     -->

        <Polyhedra name="CERR" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="90.09*mm" z="52.50*mm"/>
            <ZSection rMin="89.59*mm" rMax="141.09*mm" z="103.50*mm"/>
            <ZSection rMin="141.09*mm" rMax="141.09*mm" z="155.00*mm"/>
        </Polyhedra>
        <!-- layer    5 copies (5.mm+2mm)/sin(45deg) + 0.40mm = 10.3 (7.07+2.83+0.40) -->
        <!-- 0.4 mm air gap included -->
        <!-- CAEL: Tungsten layer, CAEA: air layer, CAEF: AIR -->
	<!-- The two high-eta corners (in r-phi-plane) of the plates are cut off -->
	<!-- For that a boolean subtraction with the volumes SubtractBox1 and SubtractBox2 is used. -->
	<!-- The initial polyhedron without cuts is called "CAEL_helper1". -->
	<!-- Then the corner with smaller phi is cut with SubtractBox1 and the produced helper-volume with one cut corner is called "CAEL_helper2"-->
	<!-- At last the volume "CAEL_helper2" is cut again with SubtractBox2 and the final W/Q plate is called CAEL/CAEA/CAEF -->

	<Box name="SubtractBox1" dx="1.9445*mm" dy="10*mm" dz="40*mm"/> 
	<Box name="SubtractBox2" dx="1.9445*mm" dy="10*mm" dz="40*mm"/> 

	<Polyhedra name="CAEL_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="48.89*mm" z="11.30*mm"/>
            <ZSection rMin="130.79*mm" rMax="141.09*mm" z="103.50*mm"/>
            <ZSection rMin="141.09*mm" rMax="141.09*mm" z="113.80*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAEL_helper2">
	  <rSolid name="castor:CAEL_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAEL">
	  <rSolid name="castor:CAEL_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
        <Polyhedra name="CAEA_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="41.82*mm" z="4.23*mm"/>
            <ZSection rMin="137.86*mm" rMax="141.09*mm" z="103.50*mm"/>
            <ZSection rMin="141.09*mm" rMax="141.09*mm" z="106.73*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAEA_helper2">
	  <rSolid name="castor:CAEA_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAEA">
	  <rSolid name="castor:CAEA_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
	<Polyhedra name="CAEF_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="41.42*mm" z="3.83*mm"/>
            <ZSection rMin="138.26*mm" rMax="141.09*mm" z="103.50*mm"/>
            <ZSection rMin="141.09*mm" rMax="141.09*mm" z="106.33*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAEF_helper2">
	  <rSolid name="castor:CAEF_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAEF">
	  <rSolid name="castor:CAEF_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
        <!-- shape to be used for Intersection to create C3TF,C4TF semi-trapezoid solids   -->
        <!-- box defined from center of box (rotated therefore x!=x_global) -->
        <!-- dz=Height of plate/2 + 3 mm (arbitrary) ; dy = plate width/2 -->
	<Box name="C2EF" dz="76.890*mm" dy="(29.79)*mm" dx="1.495*mm"/>
        <IntersectionSolid name="castor:C3EF">
            <rSolid name="castor:CAEF"/>
            <rSolid name="castor:C2EF"/>
            <rRotation name="rotations:CARM"/>
            <Translation x="93.75198195*mm" y="6.57782247*mm" z="53.6642067*mm"/> 
        </IntersectionSolid>
        <IntersectionSolid name="castor:C4EF">
            <rSolid name="castor:CAEF"/>
            <rSolid name="castor:C2EF"/>
            <rRotation name="rotations:CARM"/>
            <Translation x="70.94403509*mm" y="61.64098148*mm" z="53.66420678*mm"/>
        </IntersectionSolid>
        <!--  -->
        <!-- tree with HADRONIC calorimeter 1 copy 8x14x7x(10.5) -->
        <!--  -->
        <!--  -->
        <Polyhedra name="CAHC" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.0*mm"/>
            <ZSection rMin="40.00*mm" rMax="177.40*mm" z="137.4*mm"/>
            <ZSection rMin="40.00*mm" rMax="177.40*mm" z="1212.0*mm"/>
            <ZSection rMin="177.40*mm" rMax="177.40*mm" z="1349.4*mm"/>
        </Polyhedra>
        <!-- to have octant StainlessSteel skeleton to support WQ plates  -->
        <!-- CAHS sector - Air, 8 copies with deltaPhi=45.0  -->
        <Polyhedra name="CAHS" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.0*mm"/>
            <ZSection rMin="40.00*mm" rMax="177.40*mm" z="137.4*mm"/>
            <ZSection rMin="40.00*mm" rMax="177.40*mm" z="1212.0*mm"/>
            <ZSection rMin="177.40*mm" rMax="177.40*mm" z="1349.4*mm"/>
        </Polyhedra>
        <!-- HAD read-out channel  with StainlessSteel size  12 copies -->
        <Polyhedra name="CAHR" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="40.00*mm" rMax="40.00*mm" z="0.0*mm"/>
            <ZSection rMin="40.00*mm" rMax="141.00*mm" z="101.0*mm"/>
            <ZSection rMin="76.40*mm" rMax="177.40*mm" z="137.4*mm"/>
            <ZSection rMin="177.40*mm" rMax="177.40*mm" z="238.4*mm"/>
        </Polyhedra>
        <!-- reduced rMin,rMax by (1.mm (StainlessSteel)/tg(22.5)) -1mm = 1.41mm-->
        <!-- the special X,Y shifts are needed (see CERR) -->
        <Polyhedra name="CHRR" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="139.59*mm" z="102.00*mm"/>
            <ZSection rMin="73.99*mm" rMax="174.99*mm" z="137.40*mm"/>
            <ZSection rMin="174.99*mm" rMax="174.99*mm" z="238.40*mm"/>
        </Polyhedra>
        <!-- layer    7 copies (10.+4.+0.4)/sin(45deg)=20.2  (14.14+5.66+0.60) -->
	<!-- tungsten layer -->
        <Polyhedra name="CAHL_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="58.79*mm" z="21.20*mm"/>
            <ZSection rMin="154.79*mm" rMax="174.99*mm" z="137.40*mm"/>
            <ZSection rMin="174.99*mm" rMax="174.99*mm" z="157.60*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAHL_helper2">
	  <rSolid name="castor:CAHL_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAHL">
	  <rSolid name="castor:CAHL_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
	<!-- quartz volume layer where wrapping (here simply air?) is included?-->
        <Polyhedra name="CAHA_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="44.65*mm" z="7.06*mm"/>
            <ZSection rMin="168.93*mm" rMax="174.99*mm" z="137.40*mm"/>
            <ZSection rMin="174.99*mm" rMax="174.99*mm" z="143.46*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAHA_helper2">
	  <rSolid name="castor:CAHA_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAHA">
	  <rSolid name="castor:CAHA_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
	<!-- quartz volume without wrapping where will be intersected -->
        <Polyhedra name="CAHF_helper1" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="38.59*mm" rMax="38.59*mm" z="1.00*mm"/>
            <ZSection rMin="38.59*mm" rMax="44.25*mm" z="6.66*mm"/>
            <ZSection rMin="169.33*mm" rMax="174.99*mm" z="137.40*mm"/>
            <ZSection rMin="174.99*mm" rMax="174.99*mm" z="143.06*mm"/>
        </Polyhedra>
	<SubtractionSolid name="castor:CAHF_helper2">
	  <rSolid name="castor:CAHF_helper1"/>
	  <rSolid name="castor:SubtractBox1"/>
	  <rRotation name="castor:SubtractBoxRot1"/>
	  <Translation x="(37.59/cos(22.5*deg))*mm" y="0.*mm" z="1.*mm"/>
	</SubtractionSolid>
	<SubtractionSolid name="castor:CAHF">
	  <rSolid name="castor:CAHF_helper2"/>
	  <rSolid name="castor:SubtractBox2"/>
	  <rRotation name="castor:SubtractBoxRot2"/>
	  <Translation x="37.59*cos(45*deg)/cos(22.5*deg)*mm" y="2*37.59*sin(22.5*deg)*mm" z="1.*mm"/>
	</SubtractionSolid>
        <!--  -->
        <!--  -->
        <!-- shape to be used for Intersection to create C3TF,C4TF solids   -->
        <Box name="C2HF" dz="100.865*mm" dy="36.35*mm" dx="2.980*mm"/>
        <IntersectionSolid name="castor:C3HF">
            <rSolid name="castor:CAHF"/>
            <rSolid name="castor:C2HF"/>
            <rRotation name="rotations:CARM"/>
            <Translation x="110.861741*mm" y="6.71078*mm" z="69.9071*mm"/>
        </IntersectionSolid>
        <IntersectionSolid name="castor:C4HF">
            <rSolid name="castor:CAHF"/>
            <rSolid name="castor:C2HF"/>
            <rRotation name="rotations:CARM"/>
            <Translation x="83.13641*mm" y="73.645852*mm" z="69.9071*mm"/>
        </IntersectionSolid>
        <!--  -->
        <!-- tree with EM dead material  1 copy 8x2  -->
        <!--  -->
        <Polyhedra name="CEDC" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="144.50*mm" rMax="144.50*mm" z="104.5*mm"/>
            <ZSection rMin="144.50*mm" rMax="247.50*mm" z="207.5*mm"/>
            <ZSection rMin="200.20*mm" rMax="303.20*mm" z="263.2*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="366.2*mm"/>
        </Polyhedra>
        <!-- one sector  8 copies -->
        <Polyhedra name="CEDS" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="144.50*mm" rMax="144.50*mm" z="104.5*mm"/>
            <ZSection rMin="144.50*mm" rMax="247.50*mm" z="207.5*mm"/>
            <ZSection rMin="200.20*mm" rMax="303.20*mm" z="263.2*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="366.2*mm"/>
        </Polyhedra>
        <!-- read-out channel  2 copies -->
        <Polyhedra name="CEDR" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="144.50*mm" rMax="144.50*mm" z="104.5*mm"/>
            <ZSection rMin="144.50*mm" rMax="196.00*mm" z="156.0*mm"/>
            <ZSection rMin="251.70*mm" rMax="303.20*mm" z="263.2*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="314.7*mm"/>
        </Polyhedra>
        <!-- compartment with Air lightguide (1 mm wall strength) (external part)  1 copy -->
        <Polyhedra name="CEAL" numSide="1" startPhi="[castor:LGAngleBegin]" deltaPhi="[castor:LGAngleDelta]">
            <ZSection rMin="67.6913*mm" rMax="67.6913*mm" z="13.50*mm"/>
            <ZSection rMin="67.6913*mm" rMax="98.829*mm" z="39.5*mm"/>
            <ZSection rMin="105.2413*mm" rMax="149.9623*mm" z="82.27*mm"/>
            <ZSection rMin="149.9623*mm" rMax="149.9623*mm" z="133.27*mm"/>
        </Polyhedra>
        <!-- Air compartment in CEAL (lightguide) (internal part of LG)  1 copy -->
        <Polyhedra name="CEAI" numSide="1" startPhi="[castor:LGAngleBegin]" deltaPhi="[castor:LGAngleDelta]">
           <ZSection rMin="62.48432*mm" rMax="62.48432*mm" z="14.50*mm"/>
           <ZSection rMin="62.48432*mm" rMax="91.22937*mm" z="38.50*mm"/>
           <ZSection rMin="101.78906*mm" rMax="144.75532*mm" z="83.27*mm"/>
           <ZSection rMin="144.75532*mm" rMax="144.75532*mm" z="132.27*mm"/>
        </Polyhedra>
        <!-- Air volume to be filled by PMT  1 copy -->
        <!-- volume for PMT's -->
        <!-- Air volume to be filled by PMT box   1 copy -->
        <Polyhedra name="CEEL" numSide="1" startPhi="19.4709*deg" deltaPhi="6.0582*deg">
            <ZSection rMin="226.771*mm" rMax="226.771*mm" z="214.771*mm"/>
            <ZSection rMin="226.771*mm" rMax="250.771*mm" z="238.771*mm"/>
            <ZSection rMin="258.271*mm" rMax="282.271*mm" z="270.271*mm"/>
            <ZSection rMin="282.271*mm" rMax="282.271*mm" z="294.271*mm"/>
        </Polyhedra>
        <!-- -->
        <!--  -->
        <!-- tree with Hadronic dead material  1 copy 8x12 -->
        <!--  -->
        <Polyhedra name="CHDC" numSide="4" startPhi="0.0*deg" deltaPhi="180.0*deg">
            <ZSection rMin="178.40*mm" rMax="178.40*mm" z="241.4*mm"/>
            <ZSection rMin="178.40*mm" rMax="303.20*mm" z="366.2*mm"/>
            <ZSection rMin="178.40*mm" rMax="303.20*mm" z="1453.4*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="1578.2*mm"/>
        </Polyhedra>
        <!-- one sector  8 copies -->
        <!-- radius of LG + PMT housing = 124.8 mm -->
        <Polyhedra name="CHDS" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="178.40*mm" rMax="178.40*mm" z="241.4*mm"/>
            <ZSection rMin="178.40*mm" rMax="303.20*mm" z="366.2*mm"/>
            <ZSection rMin="178.40*mm" rMax="303.20*mm" z="1453.4*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="1578.2*mm"/>
        </Polyhedra>
        <!-- read-out channel  12 copies -->
        <Polyhedra name="CHDR" numSide="1" startPhi="0.0*deg" deltaPhi="45.0*deg">
            <ZSection rMin="178.40*mm" rMax="178.40*mm" z="241.4*mm"/>
            <ZSection rMin="178.40*mm" rMax="279.40*mm" z="342.4*mm"/>
            <ZSection rMin="217.60*mm" rMax="303.20*mm" z="381.6*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="467.2*mm"/>
        </Polyhedra>
        <!--  Aluminium (1mm) compartment with Air lightguide (external part)  1 copy -->
        <Polyhedra name="CHAL" numSide="1" startPhi="7.1364*deg" deltaPhi="30.7273*deg">
            <ZSection rMin="45.1808*mm" rMax="45.1808*mm" z="21.65*mm"/>
            <ZSection rMin="45.1808*mm" rMax="83.2830*mm" z="48.65*mm"/>
            <ZSection rMin="64.6976*mm" rMax="119.3108*mm" z="74.13*mm"/>
            <ZSection rMin="119.3108*mm" rMax="119.3108*mm" z="145.43*mm"/>
        </Polyhedra>
        <Polyhedra name="CHAI" numSide="1" startPhi="7.1364*deg" deltaPhi="30.7273*deg">
            <ZSection rMin="43.5074*mm" rMax="43.5074*mm" z="22.15*mm"/>
            <ZSection rMin="43.5074*mm" rMax="80.1985*mm" z="48.15*mm"/>
            <ZSection rMin="63.7902*mm" rMax="117.6374*mm" z="74.63*mm"/>
            <ZSection rMin="117.6374*mm" rMax="117.6374*mm" z="144.93*mm"/>
        </Polyhedra>
        <!-- Air volume to be filled by PMT  1 copy -->
        <!-- volume for PMT's -->
        <Polyhedra name="CHEL" numSide="1" startPhi="19.5531*deg" deltaPhi="5.89386*deg">
            <ZSection rMin="252.53*mm" rMax="252.53*mm" z="239.53*mm"/>
            <ZSection rMin="252.53*mm" rMax="278.53*mm" z="264.53*mm"/>
            <ZSection rMin="277.20*mm" rMax="303.20*mm" z="290.2*mm"/>
            <ZSection rMin="303.20*mm" rMax="303.20*mm" z="316.2*mm"/>
        </Polyhedra>
    </SolidSection>
    <!--  -->
    <!-- MATERIALS -->
    <LogicalPartSection label="castor.xml">
        <!--  -->
        <!--  -->
        <LogicalPart name="CAST" category="unspecified">
            <rSolid name="CAST"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CASTFar" category="unspecified">
            <rSolid name="CASTFar"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CASTNear" category="unspecified">
            <rSolid name="CASTNear"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <!-- -->
        <!--  Aluminium separation of EM+H sections  -->
        <LogicalPart name="CAAI" category="unspecified">
            <rSolid name="CAAI"/>
            <rMaterial name="materials:Aluminium"/>
        </LogicalPart>
        <!-- -->
        <!--  Materials for EM calorimeter -->
        <!-- -->
        <LogicalPart name="CAEC" category="unspecified">
            <rSolid name="CAEC"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CAES" category="unspecified">
            <rSolid name="CAES"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CAER" category="unspecified">
            <rSolid name="CAER"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CERR" category="unspecified">
            <rSolid name="CERR"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
	<LogicalPart name="CAEL" category="unspecified">
            <rSolid name="CAEL"/>
            <rMaterial name="materials:Tungsten"/>
	</LogicalPart>
        <LogicalPart name="CAEA" category="unspecified">
            <rSolid name="CAEA"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CAEF" category="unspecified">
            <rSolid name="CAEF"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <!-- quartz plates -->
        <LogicalPart name="C3EF" category="unspecified">
            <rSolid name="C3EF"/>
            <rMaterial name="materials:Quartz"/>
        </LogicalPart>
        <LogicalPart name="C4EF" category="unspecified">
            <rSolid name="C4EF"/>
            <rMaterial name="materials:Quartz"/>
        </LogicalPart>
        <!-- dead volume materials -->
        <LogicalPart name="CEDC" category="unspecified">
            <rSolid name="CEDC"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CEDS" category="unspecified">
            <rSolid name="CEDS"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CEDR" category="unspecified">
            <rSolid name="CEDR"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CEAL" category="unspecified">
            <rSolid name="CEAL"/>
            <rMaterial name="materials:Aluminium"/>
        </LogicalPart>
        <LogicalPart name="CEAI" category="unspecified">
            <rSolid name="CEAI"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CEEL" category="unspecified">
            <rSolid name="CEEL"/>
            <rMaterial name="materials:Castor_Electronics averag"/>
        </LogicalPart>
        <!-- materials for HAD section -->
        <LogicalPart name="CAHC" category="unspecified">
            <rSolid name="CAHC"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CAHS" category="unspecified">
            <rSolid name="CAHS"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CAHR" category="unspecified">
            <rSolid name="CAHR"/>
            <rMaterial name="materials:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="CHRR" category="unspecified">
            <rSolid name="CHRR"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CAHL" category="unspecified">
            <rSolid name="CAHL"/>
            <rMaterial name="materials:Tungsten"/>
        </LogicalPart>
        <LogicalPart name="CAHA" category="unspecified">
            <rSolid name="CAHA"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CAHF" category="unspecified">
            <rSolid name="CAHF"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="C3HF" category="unspecified">
            <rSolid name="C3HF"/>
            <rMaterial name="materials:Quartz"/>
        </LogicalPart>
        <LogicalPart name="C4HF" category="unspecified">
            <rSolid name="C4HF"/>
            <rMaterial name="materials:Quartz"/>
        </LogicalPart>
        <!-- materials for the dead HAD volumes -->
        <LogicalPart name="CHDC" category="unspecified">
            <rSolid name="CHDC"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CHDS" category="unspecified">
            <rSolid name="CHDS"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CHDR" category="unspecified">
            <rSolid name="CHDR"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CHAL" category="unspecified">
            <rSolid name="CHAL"/>
            <rMaterial name="materials:Aluminium"/>
        </LogicalPart>
        <LogicalPart name="CHAI" category="unspecified">
            <rSolid name="CHAI"/>
            <rMaterial name="materials:Air"/>
        </LogicalPart>
        <LogicalPart name="CHEL" category="unspecified">
            <rSolid name="CHEL"/>
            <rMaterial name="materials:Castor_Electronics averag"/>
        </LogicalPart>
        <!--  -->
    </LogicalPartSection>
    <PosPartSection label="castor.xml">
        <!--  -->
        <!--  -->
        <!-- main CASTOR volume inside polycone "forward:Castor" -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="forward:CastorB"/>
            <rChild name="castor:CASTFar"/>
            <rRotation name="castor:CASTFarTilt"/>
            <!-- please multiply x by -1 since CASTOR on eta minus side is mirrored-->
            <!-- the tilt is defined so that the face position center face position does not change-->
            <Translation x="0.0*cm - [castor:castLength]*sin([castor:CASTFarTiltAngle])"
			 y="0.0*cm"
			 z="0*mm + [castor:castLength]*(1-cos([castor:CASTFarTiltAngle]))"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="forward:CastorB"/>
            <rChild name="castor:CASTNear"/>
            <rRotation name="castor:CASTNearTilt"/>
            <!-- please multiply x by -1 since CASTOR on eta minus side is mirrored-->
            <!-- the tilt is defined so that the face position center face position does not change-->
            <Translation x="0.0*cm - [castor:castLength]*sin([castor:CASTNearTiltAngle])"
			 y="0.0*cm"
			 z="0*mm + [castor:castLength]*(1-cos([castor:CASTNearTiltAngle]))"/>
        </PosPart>

        <PosPart copyNumber="2">
            <rParent name="castor:CASTNear"/>
            <rChild name="castor:CAST"/>
            <rRotation name="rotations:R090"/>
            <Translation x="0.0*cm" y="0.0*cm" z="-0.1*mm" />
        </PosPart>

        <PosPart copyNumber="3">
            <rParent name="castor:CASTFar"/>
            <rChild name="castor:CAST"/>
            <rRotation name="rotations:R270"/>
            <Translation x="0.0*cm" y="0.0*cm" z="-0.1*mm" />
        </PosPart>
        <!--  -->
        <!-- Aluminium volume between EM & HAD sections : 1 copy  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAST"/>
            <rChild name="castor:CAAI"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*cm" y="0.0*cm" z="103.1*mm"/>
        </PosPart>
        <!-- EM calorimeter  1 copy -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAST"/>
            <rChild name="castor:CAEC"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*cm" y="0.0*cm" z="0.1*mm"/>
        </PosPart>
        <!-- HADRONIC calorimeter 1 copy  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAST"/>
            <rChild name="castor:CAHC"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*cm" y="0.0*cm" z="108.1*mm"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!-- one EM-sector 4 copies in each half-->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAEC"/>
            <rChild name="castor:CAES"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CAEC"/>
            <rChild name="castor:CAES"/>
            <rRotation name="rotations:R045"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CAEC"/>
            <rChild name="castor:CAES"/>
            <rRotation name="rotations:R090"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CAEC"/>
            <rChild name="castor:CAES"/>
            <rRotation name="rotations:R135"/>
        </PosPart>
        <!--  -->
        <!-- HADRONIC part sector :  4 copies in each half-->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAHC"/>
            <rChild name="castor:CAHS"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CAHC"/>
            <rChild name="castor:CAHS"/>
            <rRotation name="rotations:R045"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CAHC"/>
            <rChild name="castor:CAHS"/>
            <rRotation name="rotations:R090"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CAHC"/>
            <rChild name="castor:CAHS"/>
            <rRotation name="rotations:R135"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!-- EM read-out channels, 2 copies 5 layers each -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAES"/>
            <rChild name="castor:CAER"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CAES"/>
            <rChild name="castor:CAER"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="51.5*mm"/>
        </PosPart>
        <!-- reduced rmin, rmax volume  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAER"/>
            <rChild name="castor:CERR"/>
            <rRotation name="rotations:000D"/>
	    <Translation x="2.41*cos(22.5*deg)*mm" y="2.41*sin(22.5*deg)*mm" z="0.0*mm"/>
	    
        </PosPart>
        <!--  -->
        <!-- HAD read-out channel  12 copies include 5 layers -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="101.0*mm"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="202.0*mm"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="303.0*mm"/>
        </PosPart>
        <PosPart copyNumber="5">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="404.0*mm"/>
        </PosPart>
        <PosPart copyNumber="6">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="505.0*mm"/>
        </PosPart>
        <PosPart copyNumber="7">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="606.0*mm"/>
        </PosPart>
        <PosPart copyNumber="8">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="707.0*mm"/>
        </PosPart>
        <PosPart copyNumber="9">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="808.0*mm"/>
        </PosPart>
        <PosPart copyNumber="10">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="909.0*mm"/>
        </PosPart>
        <PosPart copyNumber="11">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="1010.0*mm"/>
        </PosPart>
        <PosPart copyNumber="12">
            <rParent name="castor:CAHS"/>
            <rChild name="castor:CAHR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="1111.0*mm"/>
        </PosPart>
        <!-- reduced rmin, rmax volumes -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAHR"/>
            <rChild name="castor:CHRR"/>
            <rRotation name="rotations:000D"/>
	    <Translation x="2.41*cos(22.5*deg)*mm" y="2.41*sin(22.5*deg)*mm" z="0.0*mm"/>
        </PosPart>
        <!--  -->
        <!-- EM layers :   5 copies -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CERR"/>
            <rChild name="castor:CAEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CERR"/>
            <rChild name="castor:CAEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="10.30*mm"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CERR"/>
            <rChild name="castor:CAEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="20.60*mm"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CERR"/>
            <rChild name="castor:CAEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="30.90*mm"/>
        </PosPart>
        <PosPart copyNumber="5">
            <rParent name="castor:CERR"/>
            <rChild name="castor:CAEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="41.20*mm"/>
        </PosPart>
        <!--  -->
        <!-- HAD layers : 5 copies -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CHRR"/>
            <rChild name="castor:CAHL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CHRR"/>
            <rChild name="castor:CAHL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="20.20*mm"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CHRR"/>
            <rChild name="castor:CAHL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="40.40*mm"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CHRR"/>
            <rChild name="castor:CAHL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="60.60*mm"/>
        </PosPart>
        <PosPart copyNumber="5">
            <rParent name="castor:CHRR"/>
            <rChild name="castor:CAHL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="80.80*mm"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!-- EM section: Air-Paper-Quartz volumes 1 by 1 by 1 copies -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAEL"/>
            <rChild name="castor:CAEA"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="7.07*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAEA"/>
            <rChild name="castor:CAEF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.2*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAEF"/>
            <rChild name="castor:C3EF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.000*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAEF"/>
            <rChild name="castor:C4EF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.000*mm"/>
        </PosPart>
        <!-- HAD sampling unit : Air-Paper-Quartz volumes 1 by 1 by 1 copies -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAHL"/>
            <rChild name="castor:CAHA"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="14.14*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAHA"/>
            <rChild name="castor:CAHF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.28142*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAHF"/>
            <rChild name="castor:C3HF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.000*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CAHF"/>
            <rChild name="castor:C4HF"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.000*mm"/>
        </PosPart>
        <!--  -->
        <!-- copies for dead material -->
        <!-- EM dead material -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAST"/>
            <rChild name="castor:CEDC"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CEDC"/>
            <rChild name="castor:CEDS"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CEDC"/>
            <rChild name="castor:CEDS"/>
            <rRotation name="rotations:R045"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CEDC"/>
            <rChild name="castor:CEDS"/>
            <rRotation name="rotations:R090"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CEDC"/>
            <rChild name="castor:CEDS"/>
            <rRotation name="rotations:R135"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CEDS"/>
            <rChild name="castor:CEDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CEDS"/>
            <rChild name="castor:CEDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="51.5*mm"/>
        </PosPart>
        <!-- HAD dead volumes -->
        <PosPart copyNumber="1">
            <rParent name="castor:CAST"/>
            <rChild name="castor:CHDC"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CHDC"/>
            <rChild name="castor:CHDS"/>
            <rRotation name="rotations:000D"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CHDC"/>
            <rChild name="castor:CHDS"/>
            <rRotation name="rotations:R045"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CHDC"/>
            <rChild name="castor:CHDS"/>
            <rRotation name="rotations:R090"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CHDC"/>
            <rChild name="castor:CHDS"/>
            <rRotation name="rotations:R135"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="101.0*mm"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="202.0*mm"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="303.0*mm"/>
        </PosPart>
        <PosPart copyNumber="5">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="404.0*mm"/>
        </PosPart>
        <PosPart copyNumber="6">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="505.0*mm"/>
        </PosPart>
        <PosPart copyNumber="7">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="606.0*mm"/>
        </PosPart>
        <PosPart copyNumber="8">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="707.0*mm"/>
        </PosPart>
        <PosPart copyNumber="9">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="808.0*mm"/>
        </PosPart>
        <PosPart copyNumber="10">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="909.0*mm"/>
        </PosPart>
        <PosPart copyNumber="11">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="1010.0*mm"/>
        </PosPart>
        <PosPart copyNumber="12">
            <rParent name="castor:CHDS"/>
            <rChild name="castor:CHDR"/>
            <rRotation name="rotations:000D"/>
            <Translation x="0.0*mm" y="0.0*mm" z="1111.0*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CEDR"/>
            <rChild name="castor:CEAL"/>
            <rRotation name="rotations:CABK"/>
            <Translation x="283.5002*mm" y="85.037*mm" z="239.2853*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CEDR"/>
            <rChild name="castor:CEAL"/>
            <rRotation name="rotations:CABK"/>
            <Translation x="260.5945*mm" y="140.33465*mm" z="239.2853*mm"/>
        </PosPart>
	<!-- shift back by rShift in direction of axis -->
        <PosPart copyNumber="1">
            <rParent name="castor:CEAL"/>
            <rChild name="castor:CEAI"/>
            <rRotation name="rotations:000D"/>
            <Translation x="[castor:LGxShift]"
			 y="[castor:LGyShift]"
			 z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CEDR"/>
            <rChild name="castor:CEEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="11.4525*mm" y="-27.6488*mm" z="-13.0*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CEDR"/>
            <rChild name="castor:CEEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="-11.4525*mm" y="27.6488*mm" z="-13.0*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CHDR"/>
            <rChild name="castor:CHAL"/>
            <rRotation name="rotations:CABK"/>
            <Translation x="289.1883*mm" y="79.7934*mm" z="404.6267*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CHDR"/>
            <rChild name="castor:CHAL"/>
            <rRotation name="rotations:CABK"/>
            <Translation x="260.9096*mm" y="148.0646*mm" z="404.6267*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CHAL"/>
            <rChild name="castor:CHAI"/>
            <rRotation name="rotations:000D"/>
            <Translation x="1.5460*mm" y="0.6404*mm" z="0.0*mm"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="castor:CHDR"/>
            <rChild name="castor:CHEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="14.1393*mm" y="-34.1354*mm" z="109.5*mm"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="castor:CHDR"/>
            <rChild name="castor:CHEL"/>
            <rRotation name="rotations:000D"/>
            <Translation x="-14.1393*mm" y="34.1354*mm" z="109.5*mm"/>
        </PosPart>
    </PosPartSection>
</DDDefinition>