Geometry/FP420CommonData/data/hhhrectangle.xml - master - githubmirror/cmssw

Geometry/FP420CommonData/data/hhhrectangle.xml
1 263 строки62 KB
Ianna Osborne
Merge xml data from external package. Update.
07 авг 2013, 19:13
07 авг 2013, 19:136f2b43d
<?xml version="1.0"?>
<DDDefinition xmlns="http://www.cern.ch/cms/DDL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.cern.ch/cms/DDL ../../../DetectorDescription/Schema/DDLSchema.xsd">
    <!--    -->
    <ConstantsSection label="hhhrectangle.xml" eval="true">
        <!--  -->
        <!--  -->
        <!-- DEFINE 3D IN Y DIRECTION; IT WILL BE ROTATED THEN IN 90 DEGREE TO LIE AS IN REALITY (IN X) -->
        <!--  -->
        <!-- external radius of beam pipe in pocket area  (it was 33.35 before)) -->
        <Constant name="TubR" value="35.0*mm"/>
        <!-- external radius of beam pipe out pocket area    -->
        <Constant name="OutTubR" value="40.0*mm"/>
        <!--  -->
        <!--  -->
        <!-- x-size of pocket:it's not possible to have BoxDx bigger TubR    -->
        <!-- 2.* BoxDx(=15) must be bigger   2*XSiStation   -->
        <Constant name="BoxDx" value="34.0*mm"/>
        <!-- copper x-thickness of pocket  -->
        <Constant name="DxThickCop" value="0.05*mm"/>
        <!-- st.steel x-thickness of pocket  -->
        <Constant name="DxThickSte" value="0.15*mm"/>
        <!--Copper -->
        <!-- copper thickness for beam pipe Radius in pocket range -->
        <Constant name="dRcopper" value="0.05*mm"/>
        <!-- copper thickness (in Y) in range of flat pocket part -->
        <Constant name="dYcopper" value="0.05*mm"/>
        <!-- copper thickness of window    0.05 was                   -->
        <Constant name="dZcopper" value="0.05*mm"/>
        <!--  -->
        <!--StainlessSteel  -->
        <!-- StainlessSteel thickness of beam pipe in pocket region -->
        <Constant name="dRsteel" value="2.00*mm"/>
        <!-- StSteel thickness (in Y) in range of flat pocket part -->
        <Constant name="dYsteel" value="0.15*mm"/>
        <!-- StSteel thickness of window       0.15 was               -->
        <Constant name="dZsteel" value="0.45*mm"/>
        <!--  -->
        <!--  -->
        <!-- technical/safety value to construct SubtractionSolid -->
        <Constant name="delta" value="0.01*mm"/>
        <!--  -->
        <!--  -->
        <!--  -->
        <!-- y-size from tube center to bottom of flat horizontal pocket part -->
        <Constant name="gap" value="1.6*mm"/>
        <!--  <Constant name="gap"      value="4.3*mm"/>t -->
        <!--                          +4.3+0.05+0.15 = 4.5     -->
        <!--  -->
        <!--    y-distance from tube center to top of flat pocket part:  -->
        <!-- it's used because of previous set up , re-calculated as:  -->
        <Constant name="BoxYshft" value="[gap]+[dYcopper]+[dYsteel]"/>
        <!--  -->
        <!--  -->
        <!-- dYGap is a gap between top of flat horizontal part of pocket and detector(YSiStation) bottom -->
        <Constant name="dYGap" value="0.2*mm"/>
        <!-- so, y-size from tube center to detector bottom is 4.5+0.2=4.7-->
        <!--  -->
        <!--    Complete Unit size for tube with radius TubR: -->
        <!--  -->
        <!-- area 2*ZinWidth = Zmiddle for flanze in frame of (TubR) internal pockets area  -->
        <!-- besides, Zmiddle - distance between two neigb. pockets HPS240SBST, HPS240SBSTG (for St1, St3.)  -->
        <Constant name="ZinWidth" value="35.*mm"/>
        <Constant name="Zmiddle" value="2*[ZinWidth]"/>
        <!-- external Flanze radius -->
        <Constant name="RinFlanze" value="50.*mm"/>
        <!-- z-size of Flanze -->
        <Constant name="ZinFlanze" value="14.*mm"/>
        <!--  -->
        <!-- outside the pocket: -->
        <!-- area 2) it's area of other flanze and bellows: HPS240E2 -->
        <!-- 2*ZoutWidth for flanze and bellow out of pocket area (for tube radius OutTubR) -->
        <!-- total width of area 2)  -->
        <Constant name="ZoutWidth" value="100.*mm"/>
        <!-- other flantz width in area 2) -->
        <Constant name="ZoutFlanze" value="20.*mm"/>
        <!-- thickness of tube in area 2) , so, R = OutTubR-ZoutFlanze to OutTubR    -->
        <Constant name="RoutThick" value="4.0*mm"/>
        <!-- bellows shift from flanze   -->
        <Constant name="BellowsShift" value="10.*mm"/>
        <!-- total width of bellows   -->
        <Constant name="BellowsWidth" value="2*([ZoutWidth]/2 - [ZoutFlanze])-[BellowsShift]"/>
        <!-- <Constant name="BellowsWidth"            value="50.0*mm"/>  -->
        <!-- StSteel thickness of bellows   -->
        <Constant name="BellowsT" value="1.0*mm"/>
        <!--  -->
        <!--  -->
        <!--       ZUnit -length of Ex1,      ZUnit1 -length of Ex2,   ZUnit2 -length of Ex3            -->
        <!--ZD2-between centers of 1st and 2nd stations;  ZD3 - between centers of 1st and 3rd stations -->
        <!--  -->
        <!-- put values for ZUnit,ZD2,ZD3 and then ZUnit1 and ZUnit2 calculated via known formulas -->
        <!--  -->
        <!--  -->
        <!--case 1m between 1st and 2nd stations                                                                -->
        <!-- <Constant name="ZD2"           value="1000.*mm"/> -->
        <!-- <Constant name="ZD3"           value="8000.*mm"/> -->
        <!-- <Constant name="ZUnit"           value="1000.*mm"/> -->
        <!--  -->
        <!-- case equidistant distance between stations d2=4m. Put zUnit=4000 to have the same for ZUnit1,ZUnit2-->
        <!--  <Constant name="ZD2"           value="4000.*mm"/> -->
        <!--  <Constant name="ZD3"           value="8000.*mm"/> -->
        <!--  <Constant name="ZUnit"         value="4000.*mm"/> -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!--                              2 Stations only                                                       -->
        <!-- 8m -->
        <Constant name="ZD2" value="4000.*mm"/>
        <Constant name="ZD3" value="8000.*mm"/>
        <Constant name="ZUnit" value="8000.*mm"/>
        <!-- 4m -->
        <!-- <Constant name="ZD2"           value="2000.*mm"/> -->
        <!-- <Constant name="ZD3"           value="4000.*mm"/> -->
        <!-- <Constant name="ZUnit"         value="4000.*mm"/> -->
        <!-- 2 -->
        <!--  <Constant name="ZD2"           value="1000.*mm"/>  -->
        <!--  <Constant name="ZD3"           value="2000.*mm"/>  -->
        <!--  <Constant name="ZUnit"         value="2000.*mm"/>  -->
        <!-- 1 -->
        <!-- <Constant name="ZD2"           value="500.*mm"/>  -->
        <!-- <Constant name="ZD3"           value="1000.*mm"/>  -->
        <!-- <Constant name="ZUnit"         value="1000.*mm"/>  -->
        <!--  -->
        <!--                                                                                                     -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!--  -->
        <Constant name="ZUnit1" value="2*[ZD2]-[ZUnit]"/>
        <Constant name="ZUnit2" value="2*[ZD3]-2*[ZUnit1]-[ZUnit]"/>
        <!--  -->
        <!--  -->
        <!--                                                                              Parameter Values for station:  -->
        <!--  -->
        <!--              GasTof                 -->
        <Constant name="XGasWall" value="30.0*mm"/>
        <Constant name="XGasWThick" value="0.200*mm"/>
        <Constant name="XGasTof" value="[XGasWall]-2*[XGasWThick]"/>
        <Constant name="YGasWall" value="30.0*mm"/>
        <Constant name="YGasWThick" value="0.200*mm"/>
        <Constant name="YGasTof" value="[YGasWall]-2*[YGasWThick]"/>
        <Constant name="ZGasWall" value="360.0*mm"/>
        <Constant name="ZGasWThick" value="0.200*mm"/>
        <Constant name="ZGasTof" value="[ZGasWall]-2*[ZGasWThick]"/>
        <!--  -->
        <!-- Station itself: -->
        <!--  -->
        <Constant name="XSiStation" value="102.0*mm"/>
        <Constant name="XSiPlane" value="101.0*mm"/>
        <Constant name="XSiDet" value="7.2*mm"/>
        <Constant name="XSiDetCer" value="10.0*mm"/>
        <Constant name="XSiOutCer" value="10.0*mm"/>
        <Constant name="XSiOut0Cer" value="10.0*mm"/>
        <Constant name="XTurnPlate" value="20.0*mm"/>
        <Constant name="XTurn0Plate" value="30.0*mm"/>
        <Constant name="XFlexes" value="50.0*mm"/>
        <Constant name="XMccCard" value="100.0*mm"/>
        <!--  -->
        <Constant name="XDropOutCer" value="([XSiDetCer]+[XSiOutCer])/2"/>
        <Constant name="XDropTurnPlate" value="([XSiDetCer]+[XTurnPlate])/2+[XSiOutCer]"/>
        <!--  -->
        <!--  -->
        <Constant name="YSiStation" value="182.0*mm"/>
        <Constant name="YSiPlane" value="181.0*mm"/>
        <Constant name="YSiDet" value="8.0*mm"/>
        <Constant name="YSiDetCer" value="30.0*mm"/>
        <Constant name="YSiOutCer" value="40.0*mm"/>
        <Constant name="YSiOut0Cer" value="10.0*mm"/>
        <Constant name="YTurnPlate" value="60.0*mm"/>
        <Constant name="YTurn0Plate" value="20.0*mm"/>
        <Constant name="YFlexes" value="40.0*mm"/>
        <Constant name="YMccCard" value="80.0*mm"/>
        <!--  -->
        <Constant name="YDropPlane" value="-([YSiStation]-[YSiPlane])/2"/>
        <Constant name="YDropDet1" value="-([YSiPlane]-[YSiDet])/2"/>
        <Constant name="YDropDet2" value="-([YSiPlane]-[YSiDet])/2+[YSiDet]"/>
        <Constant name="YDropDet3" value="-([YSiPlane]-[YSiDet])/2+[YSiDet]+[YSiDet]"/>
        <Constant name="YDropDetCer" value="-([YSiPlane]-[YSiDetCer])/2"/>
        <Constant name="YDropOutCer" value="-([YSiPlane]-[YSiOutCer])/2"/>
        <Constant name="YDropOut0Cer" value="-([YSiPlane]-[YSiOut0Cer])/2+[YSiDetCer]"/>
        <Constant name="YDropTurnPlate" value="-([YSiPlane]-[YTurnPlate])/2"/>
        <Constant name="YDropTurn0Plate" value="-([YSiPlane]-[YTurn0Plate])/2+[YSiOutCer]"/>
        <Constant name="YDropFlexes" value="-([YSiPlane]-[YFlexes])/2+[YTurnPlate]"/>
        <Constant name="YDropMccCard" value="-([YSiPlane]-[YMccCard])/2+[YTurnPlate]+[YFlexes]"/>
        <!--  -->
        <Constant name="YDropGas" value="-([YSiStation]-[YGasWall])/2"/>
        <!--  -->
        <!--  -->
        <Constant name="zFlexes" value="1.0*mm"/>
        <Constant name="zMccCard" value="2.0*mm"/>
        <!--  -->
        <Constant name="zBlade" value="5.0*mm"/>
        <Constant name="gapBlade" value="1.6*mm"/>
        <Constant name="gapSupplane" value="1.6*mm"/>
        <!-- z- dimension of one plane -->
        <!-- <Constant name="ZSiPlane"          value="2.000*mm"/>-->
        <Constant name="ZSiPlane" value="2*[zBlade]+[gapBlade]+[gapSupplane]"/>
        <!-- plane containe the next content: -->
        <!-- z-size of sensitive Si plate  -->
        <Constant name="ZSiDet" value="0.250*mm"/>
        <!-- z-size of glue material between plates       -->
        <Constant name="ZBoundDet" value="0.020*mm"/>
        <!-- z-size of electronic Si plate  -->
        <Constant name="ZSiElectr" value="0.250*mm"/>
        <!-- z-size of sensor  -->
        <Constant name="ZSensor" value="[ZSiDet]+[ZBoundDet]+[ZSiElectr]"/>
        <!-- z-size of ceramic plate in active area inside superplane (it was 1.0,0.5,0.3 before)-->
        <Constant name="ZCeramDet" value="0.5*mm"/>
        <!-- z dimention of left gap at the beginning of Si plate  -->
        <!--  <Constant name="ZGapLDet"           value="0.100*mm"/> -->
        <Constant name="ZGapLDet" value="[zBlade]/2-([ZSensor]+[ZCeramDet]/2)"/>
        <!--   -->
        <Constant name="Zbeg2plane" value="-[ZSiPlane]/2+[zBlade]+[gapBlade]"/>
        <!--  -->
        <!--        before left sensor of 1-st plane in superplane                  -->
        <Constant name="Zsen11" value="-[ZSiPlane]/2+[ZGapLDet]"/>
        <!--        before right sensor of 1-st plane in superplane                  -->
        <Constant name="Zsen12" value="-[ZSiPlane]/2+[zBlade]/2+[ZCeramDet]/2"/>
        <!--        before left sensor of 2-nd plane in superplane                  -->
        <Constant name="Zsen21" value="[Zbeg2plane]+[ZGapLDet]"/>
        <!--        before right sensor of 2-nd plane in superplane                  -->
        <Constant name="Zsen22" value="[Zbeg2plane]+[zBlade]/2+[ZCeramDet]/2"/>
        <!--  -->
        <!-- distanse between superplanes-->
        <Constant name="ZKapton" value="0.100*mm"/>
        <Constant name="ZSiStep" value="[ZSiPlane]+[ZKapton]"/>
        <!-- z-size of solid to keep all superplanes together and plus 2 Frames-->
        <Constant name="ZStFrame" value="6.000*mm"/>
        <Constant name="NumberPl" value="5"/>
        <Constant name="Zedge1" value="11.0*mm"/>
        <Constant name="Zedge2" value="12.0*mm"/>
        <Constant name="ZedgeG1" value="11.0*mm"/>
        <Constant name="ZedgeG2" value="12.0*mm"/>
        <Constant name="ZSiStation" value="[NumberPl]*[ZSiStep]+2*[ZStFrame]"/>
        <!--  ZSiStation = 8*(2*(5.+1.6)+0.1)+2*6.+0.0 = 118.4  -->
        <!--  ZSiStation = 5*(2*(5.+1.6)+0.1)+2*6.+1.0 =  79.5  -->
        <!--  -->
        <!-- Z^Station_center = -(e1+e2+s)/2 + e1 + s/2 = (e1-e2)/2   -->
        <!--  -->
        <!--z-size of flat part of pocket = 2*BoxDz ()  -->
        <Constant name="BoxDz" value="([ZSiStation]+[Zedge1]+[Zedge2])/2"/>
        <Constant name="BoxDzG" value="([ZGasWall]+[ZedgeG1]+[ZedgeG2])/2"/>
        <!--  -->
        <!--  unit of tube of the same radius with one pocket include:     -->
        <!--     pocket inclined area and area for flanze:  -->
        <!-- area 1) 2*[BoxDz] + 2*[ZinWidth]  = 2*TubZ -->
        <!--where 2*BoxDz=8*13.3+2*6(=118.4)+300+160(=578.4)+0.1 - 578.5  -->
        <!--  -->
        <!--old:-->
        <!--         2*( 25    +(  33.35-16.82113357428167003697)/0.2679492)+2.*20. = 213.37313509962582432065  -->
        <!--  -->
        <!-- So, 2*TubZ = 1)   -->
        <Constant name="TubZ" value="[BoxDz]+[ZinWidth]"/>
        <Constant name="TubZG" value="[BoxDzG]+[ZinWidth]"/>
        <!-- area 3): thickness of this tube the same as for 2): RoutThick    -->
        <!-- 2*ZpureTube just tube (OutTubR) to complete space between pockets  -->
        <!-- TubZ=[BoxDz] + [ZinWidth] = 289.25+25=314.25-->
        <!-- 2*(TubZ+ZoutWidth)=2*(314.25+100)=828.5-->
        <!-- total Unit dimension is 1) (2*TubZ) + 2) (2*ZoutWidth) + 3) (2*ZpureTube) = [ZUnit]  -->
        <!--  -->
        <!--old:-->
        <!-- if we want 2500.mm between Stations centers do calculations:  -->
        <!-- (2500.-(2.*213.37313509962582432065   + 2.*100.))/2. = 936.62686490037417567935 -->
        <!--  <Constant name="ZpureTube"           value="936.62686490037417567935*mm"/> -->
        <Constant name="ZpureTubeL" value="([ZUnit]/2.-([TubZ]+[ZoutWidth]))"/>
        <Constant name="ZpureTubeR" value="([ZUnit]/2.-([TubZ]+2*[TubZG]+[ZoutWidth]))"/>
        <Constant name="ZpureTube1" value="([ZUnit1]-2*([TubZ]+[ZoutWidth]))/2."/>
        <Constant name="ZpureTubeL2" value="([ZUnit2]/2.-([TubZ]+[ZoutWidth]))"/>
        <Constant name="ZpureTubeR2" value="([ZUnit2]/2.-([TubZ]+2*[TubZG]+[ZoutWidth]))"/>
        <!--  -->
        <!-- So, total Unit dimension is 1) (2*TubZ) + 2) (2*ZoutWidth) + 3) (2*ZpureTube) = [ZUnit]  -->
        <!-- 2.*213.37313509962582432065   + 2.*100.    +2.*936.62686490037417567935   =  2500.    -->
        <!--  -->
        <!-- With ZsafetyShift variable one can change global z-position of pocket -->
        <!--  -->
        <!-- to put pocket in the center of beam pipe unit:  -->
        <Constant name="ZsafetyShift" value="[TubZ]-[BoxDz]"/>
        <Constant name="ZsafetyShiftG" value="[TubZG]-[BoxDzG]"/>
        <!-- instead of arbitrary shift from right edge of beam pipe unit: -->
        <!--      <Constant name="ZsafetyShift"  value="400*mm"/>     -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!-- Parameter Values for pitch of read-out in X and Y -->
        <!--  -->
        <!-- PitchX was 0.040 -->
        <!--     <Constant name="PitchX"                value="0.000001*mm"/>  -->
        <!--    <Constant name="PitchXW"               value="0.000001*mm"/>    -->
        <!--  -->
        <!-- <Constant name="PitchX"                value="0.050*mm"/>   -->
        <!-- <Constant name="PitchXW"               value="0.400*mm"/>   -->
        <!--  -->
        <Constant name="PitchX" value="0.100*mm"/>
        <Constant name="PitchXW" value="0.150*mm"/>
        <!--  -->
        <!--  -->
        <!--  -->
        <!-- to lift up the station just use work value ~ 100mm -->
        <Constant name="work" value="0.000*mm"/>
        <!--  -->
    </ConstantsSection>
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!--                                                                                                                                  -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <SolidSection label="hhhrectangle.xml">
        <!-- -->
        <Tubs name="HPS240Ex1" rMin="[hps240:Rmin]" rMax="[hps240:HfpR]" dz="[ZUnit]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240Ex3" rMin="[hps240:Rmin]" rMax="[hps240:HfpR]" dz="[ZUnit2]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <!--for area 2) -->
        <!-- -->
        <Tubs name="HPS240FlIn" rMin="[TubR]" rMax="[RinFlanze]" dz="[ZinFlanze]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Tubs name="HPS240E2" rMin="[hps240:Rmin]" rMax="[RinFlanze]" dz="[ZoutWidth]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Tubs name="HPS240FlOut" rMin="[OutTubR]" rMax="[RinFlanze]" dz="[ZoutFlanze]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240FlOutIn" rMin="[TubR]" rMax="[OutTubR]-[RoutThick]" dz="[ZoutFlanze]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeOut" rMin="[hps240:Rmin]" rMax="[OutTubR]" dz="[ZoutWidth]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeIn" rMin="[hps240:Rmin]" rMax="[OutTubR]-[RoutThick]" dz="[ZoutWidth]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240BellowsIn" rMin="[OutTubR]-[RoutThick]" rMax="[OutTubR]" dz="[BellowsWidth]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- 10 part of Bellow; if you want 15, change 20 to 30 and add some lines to have at end 30.:30 -->
        <Polycone name="HPS240Bellows" startPhi="0*deg" deltaPhi="360*deg">
            <ZSection z="-[BellowsWidth]/2+(0./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(1./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(2./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(3./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(4./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(5./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(6./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(7./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(8./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(9./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(10./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(11./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(12./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(13./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(14./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(15./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(16./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(17./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(18./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
            <ZSection z="-[BellowsWidth]/2+(19./20)*[BellowsWidth]" rMin="[RinFlanze]-[BellowsT]" rMax="[RinFlanze]"/>
            <ZSection z="-[BellowsWidth]/2+(20./20)*[BellowsWidth]" rMin="[OutTubR]" rMax="[OutTubR]+[BellowsT]"/>
        </Polycone>
        <!--for area 3) -->
        <!--  -->
        <Tubs name="HPS240EdgeLOut3" rMin="[hps240:Rmin]" rMax="[OutTubR]" dz="[ZpureTubeL]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeLIn3" rMin="[hps240:Rmin]" rMax="[OutTubR]-[RoutThick]" dz="[ZpureTubeL]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <!--  -->
        <Tubs name="HPS240EdgeROut3" rMin="[hps240:Rmin]" rMax="[OutTubR]" dz="[ZpureTubeR]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeRIn3" rMin="[hps240:Rmin]" rMax="[OutTubR]-[RoutThick]" dz="[ZpureTubeR]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <!--  -->
        <!--  -->
        <!--  -->
        <Tubs name="HPS240EdgeL2Out3" rMin="[hps240:Rmin]" rMax="[OutTubR]" dz="[ZpureTubeL2]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeL2In3" rMin="[hps240:Rmin]" rMax="[OutTubR]-[RoutThick]" dz="[ZpureTubeL2]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <!--  -->
        <Tubs name="HPS240EdgeR2Out3" rMin="[hps240:Rmin]" rMax="[OutTubR]" dz="[ZpureTubeR2]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <Tubs name="HPS240EdgeR2In3" rMin="[hps240:Rmin]" rMax="[OutTubR]-[RoutThick]" dz="[ZpureTubeR2]/2" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- -->
        <!--for area 1) -->
        <!-- -->
        <!-- Create Pocket for Stations!!!!!!!!!!!! placement: -->
        <!-- -->
        <!-- HPS240SBST:HPS240BPST-HPS240BOST     Copper -->
        <!--  -->
        <Tubs name="HPS240BPST" rMin="[hps240:Rmin]" rMax="[TubR]" dz="[TubZ]" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOST" dx1="[BoxDx]" dx2="[BoxDx]" dz="([TubR]-[BoxYshft]+[delta])/2" dy1="[BoxDz]" dy2="[BoxDz]"/>
        <!-- -->
        <Box name="HPS240CURR" dx="[BoxDx]" dy="([TubR]-[gap])/2" dz="[BoxDz]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1">
            <rSolid name="HPS240BPST"/>
            <rSolid name="HPS240BOST"/>
            <Translation x="0*fm" y="([TubR]+[BoxYshft]+[delta])/2" z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBST">
            <rSolid name="HPS240SBS1"/>
            <rSolid name="HPS240CURR"/>
            <Translation x="0*fm" y="([TubR]+[gap])/2." z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- HPS240SBSTs:HPS240BPSTs-HPS240BOSTs     StainlessSteel   -->
        <!--  -->
        <Tubs name="HPS240BPSTs" rMin="[hps240:Rmin]" rMax="[TubR]-[dRcopper]" dz="([TubZ])" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOSTs" dx1="[BoxDx]+[DxThickCop]" dx2="[BoxDx]+[DxThickCop]" dz="([TubR]-[dRcopper]-[BoxYshft]+[dYcopper]+[delta])/2" dy1="[BoxDz]+[dZcopper]" dy2="[BoxDz]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1s">
            <rSolid name="HPS240BPSTs"/>
            <rSolid name="HPS240BOSTs"/>
            <Translation x="0*fm" y="([TubR]-[dRcopper]+[BoxYshft]-[dYcopper]+[delta])/2" z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBSTs">
            <rSolid name="HPS240SBS1s"/>
            <rSolid name="HPS240CURR"/>
            <Translation x="0*fm" y=" ([TubR]+[gap])/2-[dYcopper]" z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- HPS240SBSTm:HPS240BPSTm-HPS240BOSTm     Vacuum -->
        <!--  -->
        <Tubs name="HPS240BPSTm" rMin="[hps240:Rmin]" rMax="[TubR]-[dRsteel]-[dRcopper]" dz="([TubZ])" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOSTm" dx1="[BoxDx]+[DxThickCop]+[DxThickSte]" dx2="[BoxDx]+[DxThickCop]+[DxThickSte]" dz="([TubR]-[dRsteel]-[dRcopper]-[BoxYshft]+[dYsteel]+[dYcopper]+[delta])/2" dy1="[BoxDz]+[dZsteel]+[dZcopper]" dy2="[BoxDz]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1m">
            <rSolid name="HPS240BPSTm"/>
            <rSolid name="HPS240BOSTm"/>
            <Translation x="0*fm" y="([TubR]-[dRsteel]-[dRcopper]+[BoxYshft]-[dYsteel]-[dYcopper]+[delta])/2" z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBSTm">
            <rSolid name="HPS240SBS1m"/>
            <rSolid name="HPS240CURR"/>
            <Translation x="0*fm" y="( [TubR]+[gap])/2. - [dYsteel] - [dYcopper]" z="[TubZ]-[ZsafetyShift]-[BoxDz]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- Create Pocket for GasTof and QUARTIC !!!!!!!!!!!! placement: -->
        <!-- -->
        <!-- HPS240SBST:HPS240BPST-HPS240BOST     Copper -->
        <!--  -->
        <Tubs name="HPS240BPSTG" rMin="[hps240:Rmin]" rMax="[TubR]" dz="[TubZG]" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOSTG" dx1="[BoxDx]" dx2="[BoxDx]" dz="([TubR]-[BoxYshft]+[delta])/2" dy1="[BoxDzG]" dy2="[BoxDzG]"/>
        <!-- -->
        <Box name="HPS240CURRG" dx="[BoxDx]" dy="([TubR]-[gap])/2" dz="[BoxDzG]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1G">
            <rSolid name="HPS240BPSTG"/>
            <rSolid name="HPS240BOSTG"/>
            <Translation x="0*fm" y="([TubR]+[BoxYshft]+[delta])/2" z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBSTG">
            <rSolid name="HPS240SBS1G"/>
            <rSolid name="HPS240CURRG"/>
            <Translation x="0*fm" y="([TubR]+[gap])/2." z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- -->
        <!-- HPS240SBSTs:HPS240BPSTs-HPS240BOSTs     StainlessSteel   -->
        <!--  -->
        <Tubs name="HPS240BPSTGs" rMin="[hps240:Rmin]" rMax="[TubR]-[dRcopper]" dz="[TubZG]" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOSTGs" dx1="[BoxDx]+[DxThickCop]" dx2="[BoxDx]+[DxThickCop]" dz="([TubR]-[dRcopper]-[BoxYshft]+[dYcopper]+[delta])/2" dy1="[BoxDzG]+[dZcopper]" dy2="[BoxDzG]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1Gs">
            <rSolid name="HPS240BPSTGs"/>
            <rSolid name="HPS240BOSTGs"/>
            <Translation x="0*fm" y="([TubR]-[dRcopper]+[BoxYshft]-[dYcopper]+[delta])/2" z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBSTGs">
            <rSolid name="HPS240SBS1Gs"/>
            <rSolid name="HPS240CURRG"/>
            <Translation x="0*fm" y=" ([TubR]+[gap])/2-[dYcopper]" z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- HPS240SBSTm:HPS240BPSTm-HPS240BOSTm     Vacuum -->
        <!--  -->
        <Tubs name="HPS240BPSTGm" rMin="[hps240:Rmin]" rMax="[TubR]-[dRsteel]-[dRcopper]" dz="([TubZG])" startPhi="0*deg" deltaPhi="360*deg"/>
        <!-- -->
        <Trd1 name="HPS240BOSTGm" dx1="[BoxDx]+[DxThickCop]+[DxThickSte]" dx2="[BoxDx]+[DxThickCop]+[DxThickSte]" dz="([TubR]-[dRsteel]-[dRcopper]-[BoxYshft]+[dYsteel]+[dYcopper]+[delta])/2" dy1="[BoxDzG]+[dZsteel]+[dZcopper]" dy2="[BoxDzG]"/>
        <!-- -->
        <SubtractionSolid name="HPS240SBS1Gm">
            <rSolid name="HPS240BPSTGm"/>
            <rSolid name="HPS240BOSTGm"/>
            <Translation x="0*fm" y="([TubR]-[dRsteel]-[dRcopper]+[BoxYshft]-[dYsteel]-[dYcopper]+[delta])/2" z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP42090"/>
        </SubtractionSolid>
        <!-- -->
        <SubtractionSolid name="HPS240SBSTGm">
            <rSolid name="HPS240SBS1Gm"/>
            <rSolid name="HPS240CURRG"/>
            <Translation x="0*fm" y="( [TubR]+[gap])/2. - [dYsteel] - [dYcopper]" z="[TubZG]-[ZsafetyShiftG]-[BoxDzG]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </SubtractionSolid>
        <!-- -->
        <!-- -->
        <!-- -->
        <!--  -->
        <!-- Si Det.:SISTATION:SIPLANE:(SIDETL+BOUNDDET        +SIDETR + CERAMDET) -->
        <!--         Air:      Air:     Si:    Boron Polyethyl.: Si:      Ceramic: -->
        <!--  -->
        <Box name="HPS240SISTATION" dx="[XSiStation]/2" dy="[YSiStation]/2" dz="[ZSiStation]/2"/>
        <!-- -->
        <Box name="HPS240SIPLANE" dx="[XSiPlane]/2" dy="[YSiPlane]/2" dz="[ZSiPlane]/2"/>
        <!-- -->
        <Box name="HPS240SENSOR1" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZSensor]/2"/>
        <Box name="HPS240SENSOR2" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZSensor]/2"/>
        <Box name="HPS240SIDETL" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZSiDet]/2"/>
        <Box name="HPS240BOUNDDET" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZBoundDet]/2"/>
        <Box name="HPS240SIDETR" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZSiDet]/2"/>
        <Box name="HPS240SIELECTR" dx="[XSiDet]/2" dy="[YSiDet]/2" dz="[ZSiElectr]/2"/>
        <!-- -->
        <Box name="HPS240CERAMDET" dx="[XSiDetCer]/2" dy="[YSiDetCer]/2" dz="[ZCeramDet]/2"/>
        <Box name="HPS240CERAMOUT" dx="[XSiOutCer]/2" dy="[YSiOutCer]/2" dz="[zBlade]/2"/>
        <Box name="HPS240CERAMOUT0" dx="[XSiOut0Cer]/2" dy="[YSiOut0Cer]/2" dz="[zBlade]/2"/>
        <Box name="HPS240TurnPlate" dx="[XTurnPlate]/2" dy="[YTurnPlate]/2" dz="[zBlade]/2"/>
        <Box name="HPS240Turn0Plate" dx="[XTurn0Plate]/2" dy="[YTurn0Plate]/2" dz="[zBlade]/2"/>
        <Box name="HPS240Flexes" dx="[XFlexes]/2" dy="[YFlexes]/2" dz="[zFlexes]/2"/>
        <Box name="HPS240MccCard" dx="[XMccCard]/2" dy="[YMccCard]/2" dz="[zMccCard]/2"/>
        <!-- -->
        <!-- Si Det.:HPS240SISTATION:HPS240SIPLANE:(HPS240SIDETL+HPS240BOUNDDET        +HPS240SIDETR + HPS240CERAMDET) -->
        <Box name="HPS240GASTOFALL" dx="[XGasWall]/2" dy="[YGasWall]/2" dz="[ZGasWall]/2"/>
        <Box name="HPS240GASTOF" dx="[XGasTof]/2" dy="[YGasTof]/2" dz="[ZGasTof]/2"/>
        <!-- -->
        <!-- -->
    </SolidSection>
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!--                                                                                                                                  -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!--  -->
    <LogicalPartSection label="hhhrectangle.xml">
        <!--    -->
        <LogicalPart name="HPS240Ex1" category="unspecified">
            <rSolid name="HPS240Ex1"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240Ex3" category="unspecified">
            <rSolid name="HPS240Ex3"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <!--  -->
        <!-- Pocket area: -->
        <!--  -->
        <LogicalPart name="HPS240SBST" category="unspecified">
            <rSolid name="HPS240SBST"/>
            <rMaterial name="materialsfp420:Copper"/>
        </LogicalPart>
        <LogicalPart name="HPS240SBSTs" category="unspecified">
            <rSolid name="HPS240SBSTs"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240SBSTm" category="unspecified">
            <rSolid name="HPS240SBSTm"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <!--  -->
        <LogicalPart name="HPS240SBSTG" category="unspecified">
            <rSolid name="HPS240SBSTG"/>
            <rMaterial name="materialsfp420:Copper"/>
        </LogicalPart>
        <LogicalPart name="HPS240SBSTGs" category="unspecified">
            <rSolid name="HPS240SBSTGs"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240SBSTGm" category="unspecified">
            <rSolid name="HPS240SBSTGm"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <!--  -->
        <!-- Detector area: -->
        <!--  -->
        <LogicalPart name="HPS240SISTATION" category="unspecified">
            <rSolid name="HPS240SISTATION"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240SENSOR1" category="unspecified">
            <rSolid name="HPS240SENSOR1"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240SENSOR2" category="unspecified">
            <rSolid name="HPS240SENSOR2"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240SIPLANE" category="unspecified">
            <rSolid name="HPS240SIPLANE"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240SIDETL" category="unspecified">
            <rSolid name="HPS240SIDETL"/>
            <rMaterial name="materialsfp420:Silicon"/>
        </LogicalPart>
        <LogicalPart name="HPS240BOUNDDET" category="unspecified">
            <rSolid name="HPS240BOUNDDET"/>
            <rMaterial name="materialsfp420:Boron Polyethyl."/>
        </LogicalPart>
        <LogicalPart name="HPS240SIELECTR" category="unspecified">
            <rSolid name="HPS240SIELECTR"/>
            <rMaterial name="materialsfp420:Silicon"/>
        </LogicalPart>
        <LogicalPart name="HPS240SIDETR" category="unspecified">
            <rSolid name="HPS240SIDETR"/>
            <rMaterial name="materialsfp420:Silicon"/>
        </LogicalPart>
        <LogicalPart name="HPS240CERAMDET" category="unspecified">
            <rSolid name="HPS240CERAMDET"/>
            <rMaterial name="materialsfp420:BladeSi70Al30"/>
        </LogicalPart>
        <!--  -->
        <!--   <rMaterial name="materialsfp420:BladeSi70Al30"/>  -->
        <!--   <rMaterial name="materialsfp420:Ceramic"/>   -->
        <!--  -->
        <!--   <rMaterial name="materialsfp420:Carbon"/>  -->
        <!--   <rMaterial name="materialsfp420:CarbonVar176"/>  -->
        <!--   <rMaterial name="materialsfp420:Carbon fibre str."/>  -->
        <!--   <rMaterial name="materialsfp420:Carbon fib.str."/>  -->
        <!--   <rMaterial name="materialsfp420:CarbonVar130"/>  -->
        <!--   <rMaterial name="materialsfp420:CarbonVar125"/>  -->
        <!--  -->
        <!--   <rMaterial name="materialsfp420:Beryllium"/>  -->
        <!--  -->
        <!--   <rMaterial name="materialsfp420:Silicon"/>      -->
        <!--   <rMaterial name="materialsfp420:Si O_2"/>       -->
        <!--   <rMaterial name="materialsfp420:Doped Quartz"/> -->
        <LogicalPart name="HPS240CERAMOUT" category="unspecified">
            <rSolid name="HPS240CERAMOUT"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240CERAMOUT0" category="unspecified">
            <rSolid name="HPS240CERAMOUT0"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240TurnPlate" category="unspecified">
            <rSolid name="HPS240TurnPlate"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240Turn0Plate" category="unspecified">
            <rSolid name="HPS240Turn0Plate"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240Flexes" category="unspecified">
            <rSolid name="HPS240Flexes"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240MccCard" category="unspecified">
            <rSolid name="HPS240MccCard"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <!--  -->
        <!--                    HPS240GASTOFALL   StainlessSteel   Air     -->
        <!--                    GasC4F10   GasC4F10        Air      -->
        <!--  -->
        <LogicalPart name="HPS240GASTOFALL" category="unspecified">
            <rSolid name="HPS240GASTOFALL"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240GASTOF" category="unspecified">
            <rSolid name="HPS240GASTOF"/>
            <rMaterial name="materialsfp420:GasC4F10"/>
        </LogicalPart>
        <!--  -->
        <!-- Dead material around: -->
        <!--  -->
        <LogicalPart name="HPS240FlIn" category="unspecified">
            <rSolid name="HPS240FlIn"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240E2" category="unspecified">
            <rSolid name="HPS240E2"/>
            <rMaterial name="materialsfp420:Air"/>
        </LogicalPart>
        <LogicalPart name="HPS240FlOut" category="unspecified">
            <rSolid name="HPS240FlOut"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <LogicalPart name="HPS240EdgeIn" category="unspecified">
            <rSolid name="HPS240EdgeIn"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <LogicalPart name="HPS240EdgeOut" category="unspecified">
            <rSolid name="HPS240EdgeOut"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <LogicalPart name="HPS240FlOutIn" category="unspecified">
            <rSolid name="HPS240FlOutIn"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240Bellows" category="unspecified">
            <rSolid name="HPS240Bellows"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <LogicalPart name="HPS240BellowsIn" category="unspecified">
            <rSolid name="HPS240BellowsIn"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <LogicalPart name="HPS240EdgeLIn3" category="unspecified">
            <rSolid name="HPS240EdgeLIn3"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <LogicalPart name="HPS240EdgeLOut3" category="unspecified">
            <rSolid name="HPS240EdgeLOut3"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <LogicalPart name="HPS240EdgeRIn3" category="unspecified">
            <rSolid name="HPS240EdgeRIn3"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <LogicalPart name="HPS240EdgeROut3" category="unspecified">
            <rSolid name="HPS240EdgeROut3"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <LogicalPart name="HPS240EdgeL2In3" category="unspecified">
            <rSolid name="HPS240EdgeL2In3"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <LogicalPart name="HPS240EdgeL2Out3" category="unspecified">
            <rSolid name="HPS240EdgeL2Out3"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <LogicalPart name="HPS240EdgeR2In3" category="unspecified">
            <rSolid name="HPS240EdgeR2In3"/>
            <rMaterial name="materialsfp420:Vacuum"/>
        </LogicalPart>
        <LogicalPart name="HPS240EdgeR2Out3" category="unspecified">
            <rSolid name="HPS240EdgeR2Out3"/>
            <rMaterial name="materialsfp420:StainlessSteel"/>
        </LogicalPart>
        <!--  -->
        <!--   -->
    </LogicalPartSection>
    <!--  -->
    <!--  -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!--                                                                                                                                  -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!-- -->
    <!--  -->
    <!--  -->
    <!--  -->
    <PosPartSection label="hhhrectangle.xml">
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hps240:HPS240E"/>
            <rChild name="hhhrectangle:HPS240Ex1"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hps240:HPS240E"/>
            <rChild name="hhhrectangle:HPS240Ex3"/>
            <Translation x="0*fm" y="0*fm" z="0*fm+[ZUnit1]+([ZUnit]+[ZUnit2])/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!-- Ex1 -->
        <!-- Ex1 ZUnit -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240SBST"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240SBSTG"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+[TubZG]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240FlIn"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]-[ZinFlanze]/2+(2*[TubZG])"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240FlIn"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]+[ZinFlanze]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240E2"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+[ZoutWidth]/2+(2*[TubZG])"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240E2"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]-[ZoutWidth]/2"/>
            <rRotation name="FP420Rot:FP42090Y2"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240EdgeROut3"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+2*[TubZG]+[ZoutWidth]+[ZpureTubeR]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240EdgeLOut3"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]-[ZoutWidth]-[ZpureTubeL]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!-- Ex3 -->
        <!-- Ex3 ZUnit2 -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240SBST"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240SBSTG"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+[TubZG]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240FlIn"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]-[ZinFlanze]/2+(2*[TubZG])"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240FlIn"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]+[ZinFlanze]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240E2"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+[ZoutWidth]/2+(2*[TubZG])"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240E2"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]-[ZoutWidth]/2"/>
            <rRotation name="FP420Rot:FP42090Y2"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240EdgeR2Out3"/>
            <Translation x="0*fm" y="0*fm" z="[TubZ]+2*[TubZG]+[ZoutWidth]+[ZpureTubeR2]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240EdgeL2Out3"/>
            <Translation x="0*fm" y="0*fm" z="-[TubZ]-[ZoutWidth]-[ZpureTubeL2]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeLOut3"/>
            <rChild name="hhhrectangle:HPS240EdgeLIn3"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeROut3"/>
            <rChild name="hhhrectangle:HPS240EdgeRIn3"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeL2Out3"/>
            <rChild name="hhhrectangle:HPS240EdgeL2In3"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeR2Out3"/>
            <rChild name="hhhrectangle:HPS240EdgeR2In3"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240E2"/>
            <rChild name="hhhrectangle:HPS240EdgeOut"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240E2"/>
            <rChild name="hhhrectangle:HPS240FlOut"/>
            <Translation x="0*fm" y="0*fm" z="-[ZoutWidth]/2+[ZoutFlanze]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240E2"/>
            <rChild name="hhhrectangle:HPS240Bellows"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeOut"/>
            <rChild name="hhhrectangle:HPS240EdgeIn"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeIn"/>
            <rChild name="hhhrectangle:HPS240FlOutIn"/>
            <Translation x="0*fm" y="0*fm" z="-[ZoutWidth]/2+[ZoutFlanze]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240EdgeOut"/>
            <rChild name="hhhrectangle:HPS240BellowsIn"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SBST"/>
            <rChild name="hhhrectangle:HPS240SBSTs"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SBSTs"/>
            <rChild name="hhhrectangle:HPS240SBSTm"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SBSTG"/>
            <rChild name="hhhrectangle:HPS240SBSTGs"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SBSTGs"/>
            <rChild name="hhhrectangle:HPS240SBSTGm"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240SISTATION"/>
            <Translation x="0*fm" y="[work]+[gap]+[dYGap]+[dYsteel]+[dYcopper]+[YSiStation]/2" z="[TubZ]-[ZsafetyShift]-[BoxDz]-([Zedge2]-[Zedge1])/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex1"/>
            <rChild name="hhhrectangle:HPS240GASTOFALL"/>
            <Translation x="0*fm" y="[work]+[gap]+[dYGap]+[dYsteel]+[dYcopper]+[YSiStation]/2+[YDropGas]" z="([TubZ]+[TubZG])+[TubZG]-[ZsafetyShiftG]-[BoxDzG]+([ZedgeG1]-[ZedgeG2])/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240Ex3"/>
            <rChild name="hhhrectangle:HPS240SISTATION"/>
            <Translation x="0*fm" y="[work]+[gap]+[dYGap]+[dYsteel]+[dYcopper]+[YSiStation]/2" z="[TubZ]-[ZsafetyShift]-[BoxDz]-([Zedge2]-[Zedge1])/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!-- pno = 6     5 super-planes   -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SISTATION"/>
            <rChild name="hhhrectangle:HPS240SIPLANE"/>
            <Translation x="0*fm" y="[YDropPlane]" z="-2*[ZSiStep]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SISTATION"/>
            <rChild name="hhhrectangle:HPS240SIPLANE"/>
            <!--  <Translation x="0*fm" y="[YDropPlane]" z="-1*[ZSiStep]" /> -->
            <Translation x="0*fm+[PitchXW]/2" y="[YDropPlane]+[PitchX]/2" z="-1*[ZSiStep]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="hhhrectangle:HPS240SISTATION"/>
            <rChild name="hhhrectangle:HPS240SIPLANE"/>
            <Translation x="0*fm" y="[YDropPlane]" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="hhhrectangle:HPS240SISTATION"/>
            <rChild name="hhhrectangle:HPS240SIPLANE"/>
            <!--   <Translation x="0*fm" y="[YDropPlane]" z="1*[ZSiStep]" /> -->
            <Translation x="0*fm+[PitchXW]/2" y="[YDropPlane]+[PitchX]/2" z="1*[ZSiStep]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="5">
            <rParent name="hhhrectangle:HPS240SISTATION"/>
            <rChild name="hhhrectangle:HPS240SIPLANE"/>
            <Translation x="0*fm" y="[YDropPlane]" z="2*[ZSiStep]"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!--  -->
        <!--  -->
        <!--        HPS240GASTOFALL    -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240GASTOFALL"/>
            <rChild name="hhhrectangle:HPS240GASTOF"/>
            <Translation x="0*fm" y="0*fm" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <!-- 1st plane of superlayer -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMDET"/>
            <Translation x="0*fm" y="[YDropDetCer]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240SENSOR1"/>
            <Translation x="0*fm" y="[YDropDet1]" z="[Zsen11]+[ZSensor]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240SENSOR2"/>
            <Translation x="0*fm" y="[YDropDet2]" z="[Zsen12]+[ZSensor]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT"/>
            <Translation x="[XDropOutCer]" y="[YDropOutCer]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT"/>
            <Translation x="-[XDropOutCer]" y="[YDropOutCer]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT0"/>
            <Translation x="0*fm" y="[YDropOut0Cer]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240TurnPlate"/>
            <Translation x="[XDropTurnPlate]" y="[YDropTurnPlate]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240TurnPlate"/>
            <Translation x="-[XDropTurnPlate]" y="[YDropTurnPlate]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240Turn0Plate"/>
            <Translation x="0*fm" y="[YDropTurn0Plate]" z="-[ZSiPlane]/2+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!-- 2nd plane of superlayer -->
        <!--  -->
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMDET"/>
            <Translation x="0*fm" y="[YDropDetCer]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240SENSOR1"/>
            <!--   <Translation x="0*fm+[PitchXW]/2" y="[YDropDet1]+[PitchX]/2" z="[Zsen21]+[ZSensor]/2" />  -->
            <Translation x="0*fm+[PitchXW]/4" y="[YDropDet1]+[PitchX]/4" z="[Zsen21]+[ZSensor]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240SENSOR2"/>
            <!--   <Translation x="0*fm+[PitchXW]/2" y="[YDropDet3]+[PitchX]/2" z="[Zsen22]+[ZSensor]/2" />  -->
            <Translation x="0*fm+[PitchXW]/4" y="[YDropDet3]+[PitchX]/4" z="[Zsen22]+[ZSensor]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT"/>
            <Translation x="[XDropOutCer]" y="[YDropOutCer]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT"/>
            <Translation x="-[XDropOutCer]" y="[YDropOutCer]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240CERAMOUT0"/>
            <Translation x="0*fm" y="[YDropOut0Cer]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="3">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240TurnPlate"/>
            <Translation x="[XDropTurnPlate]" y="[YDropTurnPlate]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="4">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240TurnPlate"/>
            <Translation x="-[XDropTurnPlate]" y="[YDropTurnPlate]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="2">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240Turn0Plate"/>
            <Translation x="0*fm" y="[YDropTurn0Plate]" z="[Zbeg2plane]+[zBlade]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240Flexes"/>
            <Translation x="0*fm" y="[YDropFlexes]" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SIPLANE"/>
            <rChild name="hhhrectangle:HPS240MccCard"/>
            <Translation x="0*fm" y="[YDropMccCard]" z="0*fm"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR1"/>
            <rChild name="hhhrectangle:HPS240SIDETL"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR1"/>
            <rChild name="hhhrectangle:HPS240BOUNDDET"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]+[ZBoundDet]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR1"/>
            <rChild name="hhhrectangle:HPS240SIELECTR"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]+[ZBoundDet]+[ZSiElectr]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!-- 
             <PosPart copyNumber="1">
             <rParent name="hhhrectangle:HPS240SENSOR2"/>
             <rChild name="hhhrectangle:HPS240SIDETR"/>
             <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]/2" />
             <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
             <PosPart copyNumber="1">
             <rParent name="hhhrectangle:HPS240SENSOR2"/>
             <rChild name="hhhrectangle:HPS240BOUNDDET"/>
             <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]+[ZBoundDet]/2" />
             <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
             <PosPart copyNumber="1">
             <rParent name="hhhrectangle:HPS240SENSOR2"/>
             <rChild name="hhhrectangle:HPS240SIELECTR"/>
             <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiDet]+[ZBoundDet]+[ZSiElectr]/2" />
             <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
             -->
        <!--  -->
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR2"/>
            <rChild name="hhhrectangle:HPS240SIELECTR"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiElectr]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR2"/>
            <rChild name="hhhrectangle:HPS240BOUNDDET"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiElectr]+[ZBoundDet]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <PosPart copyNumber="1">
            <rParent name="hhhrectangle:HPS240SENSOR2"/>
            <rChild name="hhhrectangle:HPS240SIDETR"/>
            <Translation x="0*fm" y="0*fm" z="-[ZSensor]/2+[ZSiElectr]+[ZBoundDet]+[ZSiDet]/2"/>
            <rRotation name="FP420Rot:FP420MAIN"/>
        </PosPart>
        <!--  -->
        <!--  -->
    </PosPartSection>
    <!--  -->
</DDDefinition>