Geometry/EcalCommonData/data/ebalgo.xml - master - githubmirror/cmssw

Geometry/EcalCommonData/data/ebalgo.xml
678 строк30 KB
Ianna Osborne
Merge xml data from external package. Update.
07 авг 2013, 19:09
07 авг 2013, 19:098954519
<?xml version="1.0"?>
<DDDefinition xmlns="http://www.cern.ch/cms/DDL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.cern.ch/cms/DDL ../../../DetectorDescription/Schema/DDLSchema.xsd">
	<ConstantsSection label="ebalgo.xml" eval="true">
		<Constant name="NSpmPerHalf" value="18"/>
	</ConstantsSection>
	<Algorithm name="ecal:DDEcalBarrelNewAlgo">
		<rParent name="eregalgo:ECAL"/>
		<!-- Translations indicated by 3 vectors x, y, z
		     Rotations    indicated by an axis 3 vector x,y,z followed by an angle
		     -->
		<!--    <String  name="BarParFil" value="[ebcon:BarParFil]"/>
		     <String  name="BarParVol" value="[ebcon:BarParVol]"/>
		     -->
		<!-- Barrel container volume assumed to be polycone, partial in phi for
		     test beam work
		     -->
		<String name="BarName" value="EBAR"/>
		<String name="BarMat" value="materials:Air"/>
		<Vector name="BarZPts" type="numeric" nEntries="4">
			[ebcon:BarZPts01], [ebcon:BarZPts02], [ebcon:BarZPts03], [ebcon:BarZPts04]
		</Vector>
		<Vector name="BarRMin" type="numeric" nEntries="4">
			[ebcon:BarRMin01], [ebcon:BarRMin02], [ebcon:BarRMin03], [ebcon:BarRMin04]
		</Vector>
		<Vector name="BarRMax" type="numeric" nEntries="4">
			[ebcon:BarRMax01], [ebcon:BarRMax02], [ebcon:BarRMax03], [ebcon:BarRMax04]
		</Vector>
		<Vector name="BarTran" type="numeric" nEntries="3">
			[ebcon:BarTranX], [ebcon:BarTranY], [ebcon:BarTranZ]
		</Vector>
		<Vector name="BarRota" type="numeric" nEntries="4">
			[ebrot:BarRotX], [ebrot:BarRotY], [ebrot:BarRotZ], [ebrot:BarRotA]
		</Vector>
		<Vector name="BarRota2" type="numeric" nEntries="4">
			[ebrot:BarRot2X], [ebrot:BarRot2Y], [ebrot:BarRot2Z], [ebrot:BarRot2A]
		</Vector>
		<Vector name="BarRota3" type="numeric" nEntries="4">
			[ebrot:BarRot3X], [ebrot:BarRot3Y], [ebrot:BarRot3Z], [ebrot:BarRot3A]
		</Vector>
		<Numeric name="BarPhiLo" value="[ebcon:BarPhiLo]"/>
		<Numeric name="BarPhiHi" value="[ebcon:BarPhiHi]"/>
		<Numeric name="BarHere" value="1"/>
		<!-- The base rotations and translations refer to those
		     applied to the base supermodule prior to its replication
		     -->
		<!-- Supermodule volume: polycone with adjustments via Boolean volumes
		     -->
		<String name="SpmName" value="ebalgo:ESPM"/>
		<String name="SpmMat" value="materials:E_Air"/>
		<Numeric name="SpmNPerHalf" value="[NSpmPerHalf]"/>
		<Numeric name="SpmLowPhi" value="-10.5*deg"/>
		<Numeric name="SpmDelPhi" value=" 21.5*deg"/>
		<Numeric name="SpmPhiOff" value="-0.110*mrad"/>
		<Vector name="SpmZPts" type="numeric" nEntries="3">
			0*mm, 2686.7*mm, 3044*mm
		</Vector>
		<Vector name="SpmRMin" type="numeric" nEntries="3">
			1224*mm, 1224*mm, 1439*mm
		</Vector>
		<Vector name="SpmRMax" type="numeric" nEntries="3">
			1759*mm, 1759*mm, 1759*mm
		</Vector>
		<!-- the translation PRECEDES the ROTATION
		     -->
		<Vector name="SpmBTran" type="numeric" nEntries="3">
			15.58*mm, 0*mm, 0*mm
		</Vector>
		<Vector name="SpmBRota" type="numeric" nEntries="4">
			0,0,1, 0*deg
		</Vector>
		<!--  These are individual translations & rotations
		     in addition to the initial placement above.
		     Order: 1st on +z hemisphere at phi=0 then to -z phi=0
		     -->
		<!-- the translation PRECEDES the ROTATION
		     -->
		<Vector name="SpmTran" type="numeric" nEntries="2*3*[ebalgo:NSpmPerHalf]">
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm,   
			0*mm, 0*mm, 0*mm,    0*mm, 0*mm, 0*mm,      0*mm, 0*mm, 0*mm
		</Vector>
		<Vector name="SpmRota" type="numeric" nEntries="2*4*[ebalgo:NSpmPerHalf]">
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
			
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,   
			0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg,     0,0,1,0*deg, 0,0,1,0*deg, 0,0,1,0*deg
		</Vector>
		<!-- Zero means missing, else present
		     Order: 1st on +z hemisphere at phi=0 then to -z phi=0
		     -->
		<Vector name="SpmHere" type="numeric" nEntries="2*[ebalgo:NSpmPerHalf]">
			[ebcon:SpmHere01], [ebcon:SpmHere02], [ebcon:SpmHere03],
			[ebcon:SpmHere04], [ebcon:SpmHere05], [ebcon:SpmHere06],
			[ebcon:SpmHere07], [ebcon:SpmHere08], [ebcon:SpmHere09],
			[ebcon:SpmHere10], [ebcon:SpmHere11], [ebcon:SpmHere12],
			[ebcon:SpmHere13], [ebcon:SpmHere14], [ebcon:SpmHere15],
			[ebcon:SpmHere16], [ebcon:SpmHere17], [ebcon:SpmHere18],
			
			[ebcon:SpmHere19], [ebcon:SpmHere20], [ebcon:SpmHere21],
			[ebcon:SpmHere22], [ebcon:SpmHere23], [ebcon:SpmHere24],
			[ebcon:SpmHere25], [ebcon:SpmHere26], [ebcon:SpmHere27],
			[ebcon:SpmHere28], [ebcon:SpmHere29], [ebcon:SpmHere30],
			[ebcon:SpmHere31], [ebcon:SpmHere32], [ebcon:SpmHere33],
			[ebcon:SpmHere34], [ebcon:SpmHere35], [ebcon:SpmHere36]
		</Vector>
		<!-- These are for cut BOXes which trim off the sides/corners of
		     supermodule polycone. Length & height are set by supermodule polycone
		     dimensions. Transforms are prior to above supermodule transforms.
		     The "show" displays the boxes rather than subtracting them
		     (for viewing only).
		     The initial box will be placed centered on the supermodule
		     and rotated to either edge for further fine tuning via
		     the adjustments below.
		     RM, TM are for "Minus" phi, RP, TP for plus phi.
		     Translations below come after rotations in this case.
		     -->
		<String name="SpmCutName" value="ECUTSPM"/>
		<Numeric name="SpmCutThick" value="40*mm"/>
		<Numeric name="SpmCutShow" value="0"/>
		<Vector name="SpmCutTM" nEntries="3">
			0*mm,  1*mm, 0*mm
		</Vector>
		<Vector name="SpmCutTP" nEntries="3">
			0*mm,  7*mm, 0*mm
		</Vector>
		<Numeric name="SpmCutRM" value="3.2*deg"/>
		<Numeric name="SpmCutRP" value="1.8*deg"/>
		<Numeric name="SpmExpThick" value="40*mm"/>
		<Numeric name="SpmExpWide" value="600*mm"/>
		<Numeric name="SpmExpYOff" value="15*mm"/>
		<String name="SpmSideName" value="ESPL"/>
		<String name="SpmSideMat" value="materials:Aluminium"/>
		<Numeric name="SpmSideHigh" value="38*cm"/>
		<Numeric name="SpmSideThick" value="1*mm"/>
		<Numeric name="SpmSideYOffM" value="-4*mm"/>
		<Numeric name="SpmSideYOffP" value="-2.5*mm"/>
		<!--  Now start specificiation of "Inner Layer" materials which
		     are those volumes which are tubes and which start
		     at the supermodule inner radius. We provide
		     the overall name of the parent volume (layers will
		     be indexed 1, 2, 3, ...), thicknesses, and materials.
		     -->
		<Numeric name="IlyHere" value="1"/>
		<String name="IlyName" value="EILY"/>
		<Numeric name="IlyPhiLow" value="-9.9*deg"/>
		<Numeric name="IlyDelPhi" value="19.7*deg"/>
		<Vector name="IlyThick" type="numeric" nEntries="7">
			0.2*mm, 3*mm, 0.2*mm, 0.2*mm, 25*mm, 4*mm, 12*mm
		</Vector>
		<Vector name="IlyMat" type="string" nEntries="7">
			materials:E_Epoxy,
			materials:E_Rohacell,
			materials:E_Epoxy,
			materials:E_Aluminium,
			materials:E_PolyGrains,
			materials:E_Aluminium ,
			materials:E_Air
		</Vector>
		<Numeric name="IlyPipeHere" value="1"/>
		<String name="IlyPipeName" value="EIPIP"/>
		<String name="IlyPipeMat" value="materials:E_Aluminium"/>
		<Numeric name="IlyPipeOD" value="8*mm"/>
		<Numeric name="IlyPipeID" value="6*mm"/>
		<Vector name="IlyPipeLength" type="numeric" nEntries="10">
			2573*mm,
			520*mm,
			351*mm, 
			400*mm, 
			1985*mm,
			735*mm, 
			675*mm,
			595*mm, 
			1438*mm,
			42.7*mm
		</Vector>
		<Vector name="IlyPipeType" type="numeric" nEntries="96">
			0,
			1,1,1,1,1,1,1,1,
			2,2,2,2,2,2,2,2,2,
			3,3,3,3,3,3,3,3,
			4,
			5,5,
			6,6,6,
			7,
			8,
			9,9,9,9,9,9,9,9,9,9,
			9,9,9,9,9,9,9,9,9,9,
			9,9,9,9,9,9,9,9,9,9,9,
			9,9,9,9,9,9,9,9,9,
			9,9,9,9,9,9,9,9,
			9,9,9,9,9,9,9,9,
			9,9,9,9,9,9
		</Vector>
		<Vector name="IlyPipePhi" type="numeric" nEntries="96">
			-9*deg, 
			-5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg,
			-1*deg, +1*deg,
			-7*deg, -5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg, +7*deg, +9*deg,
			-7*deg, -5*deg, -3*deg, -1*deg, +1*deg, +3*deg, +5*deg, +7*deg,
			+9*deg, 
			+7*deg,
			-5*deg, 
			-3*deg,                 +3*deg, +5*deg,
			+7*deg,
			-7*deg,
			-6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg,
			-8*deg,         -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-8*deg, -6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-6*deg, -4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg, +8*deg,
			-4*deg, -2*deg, +0*deg, +2*deg, +4*deg, +6*deg
		</Vector>
		<Vector name="IlyPipeZ" type="numeric" nEntries="96">
			31*mm, 
			1161*mm, 1161*mm, 1161*mm, 1161*mm, 1161*mm, 1161*mm, 1861*mm, 1861*mm, 
			148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,  148*mm,
			616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,  616*mm,
			616*mm, 
			1861*mm, 1778*mm,
			1861*mm, 1861*mm, 1861*mm,
			1161*mm,
			1161*mm,
			505*mm,  142*mm,  505*mm,  142*mm,  505*mm,  142*mm,  505*mm,  142*mm,
			1027*mm,  610*mm, 1027*mm,  610*mm, 1027*mm,  610*mm, 1027*mm,  610*mm,
			1155*mm, 1687*mm, 1155*mm, 1687*mm, 1155*mm, 1687*mm, 1155*mm,
			2609*mm, 2554*mm, 1855*mm, 2400*mm, 1855*mm, 2554*mm, 1855*mm, 2606*mm,
			25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,   25*mm,
			51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,   51*mm,
			571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,  571*mm,
			1773*mm, 1773*mm, 1773*mm, 1773*mm, 1773*mm, 1773*mm
		</Vector>
		<Numeric name="IlyPTMHere" value="1"/>
		<String name="IlyPTMName" value="EIPTM"/>
		<String name="IlyPTMMat" value="materials:E_Aluminium"/>
		<Numeric name="IlyPTMWidth" value="16*mm"/>
		<Numeric name="IlyPTMLength" value="10*mm"/>
		<Numeric name="IlyPTMHeight" value=" 6*mm"/>
		<Vector name="IlyPTMZ" type="numeric" nEntries="4">
			282*mm, 851*mm, 1428*mm, 2204*mm
		</Vector>
		<Vector name="IlyPTMPhi" type="numeric" nEntries="4">
			+0.963*deg - 0.6*deg, -1.037*deg - 0.6*deg, +9.5*deg - 1.2*deg, -7.037*deg - 0.6*deg
		</Vector>
		<Numeric name="IlyFanOutHere" value="1"/>
		<String name="IlyFanOutName" value="EIFO"/>
		<String name="IlyFanOutMat" value="materials:E_Aluminium"/>
		<Numeric name="IlyFanOutWidth" value=" 15*mm"/>
		<Numeric name="IlyFanOutLength" value="100*mm"/>
		<Numeric name="IlyFanOutHeight" value="  8*mm"/>
		<String name="IlyDiffName" value="EIDI"/>
		<String name="IlyDiffMat" value="materials:Teflon"/>
		<Numeric name="IlyDiffLength" value=" 25*mm"/>
		<Numeric name="IlyDiffOff" value=" 25*mm"/>
		<String name="IlyBndlName" value="EIFB"/>
		<String name="IlyBndlMat" value="materials:Glass"/>
		<Numeric name="IlyBndlLength" value=" 45*mm"/>
		<Numeric name="IlyBndlOff" value=" 55*mm"/>
		<Vector name="IlyFanOutZ" type="numeric" nEntries="11">
			2520*mm, 2520*mm, 2350*mm, 2350*mm, 1610*mm,
			1610*mm,  960*mm,  960*mm,  430*mm,  430*mm,  430*mm
		</Vector>
		<Vector name="IlyFanOutPhi" type="numeric" nEntries="11">
			0.0*deg, +2.0*deg, -4.0*deg, +6.0*deg, -4.0*deg,
			+6.0*deg, -4.0*deg, +6.0*deg, -4.0*deg, +6.0*deg,  2.0*deg
		</Vector>
		<String name="IlyFEMName" value="EIFEM"/>
		<String name="IlyFEMMat" value="materials:E_Aluminium"/>
		<Numeric name="IlyFEMWidth" value=" 10*mm"/>
		<Numeric name="IlyFEMLength" value=" 45*mm"/>
		<Numeric name="IlyFEMHeight" value="  5*mm"/>
		<Vector name="IlyFEMZ" type="numeric" nEntries="5">
			1930*mm, 1220*mm,  700*mm,  200*mm,  200*mm
		</Vector>
		<Vector name="IlyFEMPhi" type="numeric" nEntries="5">
			-4.0*deg, -4.0*deg, -4.0*deg, -4.0*deg, +2.0*deg
		</Vector>
		<!-- Barrel ECAL nominal crystal sizes from Table 3.2 ECAL TDR, page 54 
		     
		     The correspondence between GEANT/DDD dimension names & these specs
		     is the following: bl1=AF/2, tl1=CF/2, h1=BF/2, bl2=AR/2, tl2=CR/2, h2=BR/2
		     
		     underXX means the "as built" difference:  nominal - built
		     
		     -->
		<Numeric name="UnderLZ" value="00*mum"/>
		<!-- these are actual measured underages, avgd for each type. wait to implement
		     -->
		<Numeric name="UnderAF" value="53*mum"/>
		<Numeric name="UnderBF" value="44*mum"/>
		<Numeric name="UnderCF" value="56*mum"/>
		<Numeric name="UnderAR" value="51*mum"/>
		<Numeric name="UnderBR" value="36*mum"/>
		<Numeric name="UnderCR" value="55*mum"/>
		<!-- These are dummy underages
		     <Numeric name="UnderAF"      value="0*mum"  />
		     <Numeric name="UnderBF"      value="0*mum"  />
		     <Numeric name="UnderCF"      value="0*mum"  />
		     <Numeric name="UnderAR"      value="0*mum"  />
		     <Numeric name="UnderBR"      value="0*mum"  />
		     <Numeric name="UnderCR"      value="0*mum"  />
		     -->
		<Numeric name="NomCryDimLZ" value="230.0*mm"/>
		<Numeric name="NomCryDimAF" value="21.8308*mm"/>
		<Numeric name="NCryTypes" value="17"/>
		<Vector name="NomCryDimBF" type="numeric" nEntries="17">
			23.5919*mm, 22.2198*mm, 22.3422*mm, 22.4638*mm, 22.6054*mm,
			22.6010*mm, 22.5454*mm, 22.6720*mm, 22.8219*mm,
			23.0780*mm, 23.1419*mm, 23.2896*mm, 23.4664*mm,
			23.7063*mm, 23.8736*mm, 24.0620*mm, 24.2853*mm
		</Vector>
		<Vector name="NomCryDimCF" type="numeric" nEntries="17">
			21.8443*mm, 21.8736*mm, 21.9070*mm, 21.9394*mm, 21.9707*mm,
			21.9991*mm, 22.0248*mm, 22.0500*mm, 22.0734*mm,
			22.0961*mm, 22.1147*mm, 22.1324*mm, 22.1489*mm,
			22.1645*mm, 22.1778*mm, 22.1901*mm, 22.2018*mm
		</Vector>
		<Vector name="NomCryDimAR" type="numeric" nEntries="17">
			25.8422*mm, 25.8131*mm, 25.7546*mm, 25.6696*mm, 25.5615*mm,
			25.4347*mm, 25.2937*mm, 25.1417*mm, 24.9823*mm,
			24.8179*mm, 24.6528*mm, 24.4891*mm, 24.3287*mm,
			24.1727*mm, 24.0228*mm, 23.8798*mm, 23.7443*mm
		</Vector>
		<Vector name="NomCryDimBR" type="numeric" nEntries="17">
			25.4840*mm, 26.2229*mm, 26.2829*mm, 26.3143*mm, 26.3410*mm,
			26.1820*mm, 25.9533*mm, 25.9203*mm, 25.9025*mm,
			26.0011*mm, 25.8831*mm, 25.8575*mm, 25.8644*mm,
			25.9463*mm, 25.9551*mm, 25.9914*mm, 26.0706*mm
		</Vector>
		<Vector name="NomCryDimCR" type="numeric" nEntries="17">
			25.8568*mm, 25.8637*mm, 25.8442*mm, 25.7969*mm, 25.7245*mm,
			25.6297*mm, 25.5172*mm, 25.3924*mm, 25.2576*mm,
			25.1169*mm, 24.9704*mm, 24.8240*mm, 24.6792*mm,
			24.5380*mm, 24.4001*mm, 24.2680*mm, 24.1427*mm
		</Vector>
		<Numeric name="WallThAlv" value="  70*mum"/>
		<Numeric name="WrapThAlv" value="  30*mum"/>
		<Numeric name="ClrThAlv" value=" 120*mum"/>
		<Numeric name="WallFrAlv" value=" 100*mum"/>
		<Numeric name="WrapFrAlv" value="  30*mum"/>
		<Numeric name="ClrFrAlv" value="   3*mm"/>
		<Numeric name="WallReAlv" value="   0*mum"/>
		<Numeric name="WrapReAlv" value="   0*mum"/>
		<Numeric name="ClrReAlv" value="   5*mm"/>
		<!-- These are gaps between Alveoli in the Eta direction
		     as measured perpendicular to the nearest crystal axis.
		     Namely, this is NOT the gap along z, which is this
		     gap/cosTheta. The first is before the 1st, then after the 1st,
		     etc. These are in addition to the clearances around Webs.
		     -->
		<Vector name="GapAlvEta" type="numeric" nEntries="18">
			430*mum,  30*mum,  10*mum,  10*mum,  10*mum, 255*mum,
			10*mum,  10*mum,  10*mum,  915*mum,
			25*mum,  10*mum,  10*mum, 1330*mum,
			10*mum,  90*mum,  10*mum, 100*mum
		</Vector>
		<Numeric name="NCryPerAlvEta" value="5"/>
		<String name="CryName" value="EBRY"/>
		<String name="ClrName" value="ECLR"/>
		<String name="WrapName" value="EWRA"/>
		<String name="WallName" value="EWAL"/>
		<String name="CryMat" value="materials:E_PbWO4"/>
		<String name="ClrMat" value="materials:Air"/>
		<String name="WrapMat" value="materials:E_Aluminium"/>
		<String name="WallMat" value="materials:E_Epoxy"/>
		<!-- APD assembly has capsule, ceramic, bulk silicon, epoxy, sensitive silicon-->
		<String name="CapName" value="ECAP"/>
		<Numeric name="CapHere" value="1"/>
		<String name="CapMat" value="materials:Peek"/>
		<Numeric name="CapXSize" value="  23*mm"/>
		<Numeric name="CapYSize" value="  20*mm"/>
		<Numeric name="CapThick" value="   4*mm"/>
		<String name="SGLName" value="ESGL"/>
		<String name="SGLMat" value="materials:Silicone_Gel"/>
		<Numeric name="SGLThick" value=" 0.030*mm"/>
		<String name="CerName" value="ECER"/>
		<String name="CerMat" value="materials:Borosilicate_Glass"/>
		<Numeric name="CerXSize" value=" 9.1*mm"/>
		<Numeric name="CerYSize" value="10.5*mm"/>
		<Numeric name="CerThick" value=" 1.55*mm + 0.575*mm - 0.350*mm"/>
		<String name="AGLName" value="EAGL"/>
		<String name="AGLMat" value="materials:E_Epoxy"/>
		<Numeric name="AGLThick" value=" 0.575*mm"/>
		<String name="BSiName" value="EBSI"/>
		<String name="BSiMat" value="materials:E_Silicon"/>
		<Numeric name="BSiXSize" value=" 7.5*mm"/>
		<Numeric name="BSiYSize" value=" 7.5*mm"/>
		<Numeric name="BSiThick" value=" 0.400*mm + 0.575*mm"/>
		<String name="APDName" value="EAPD"/>
		<String name="APDMat" value="materials:E_Silicon"/>
		<Numeric name="APDSide" value="   5*mm"/>
		<Numeric name="APDThick" value=" 0.005*mm"/>
		<Numeric name="APDZ" value="12.5*mm"/>
		<Numeric name="APDX1" value=" 7.2*mm"/>
		<Numeric name="APDX2" value="16.8*mm"/>
		<String name="ATJName" value="EATJ"/>
		<String name="ATJMat" value="materials:E_Silicon"/>
		<Numeric name="ATJThick" value=" 0.0449*mm"/>
		<String name="ANDName" value="EAND"/>
		<String name="ANDMat" value="materials:E_Silicon"/>
		<Numeric name="ANDThick" value=" 0.0001*mm"/>
		<!-- Conical web specifications: known to be placed at 5 locations,
		     before the 1st crystal at 90deg, & thence after 25, 45, 65, & 85
		     crystals. Clearance volume holds plate inside it.
		     -->
		<Numeric name="WebHere" value="1"/>
		<String name="WebPlName" value="EWEBPL"/>
		<String name="WebClrName" value="EWEB"/>
		<String name="WebPlMat" value="materials:E_Aluminium"/>
		<String name="WebClrMat" value="materials:Air"/>
		<Vector name="WebPlTh" type="numeric" nEntries="5">
			2*mm, 4*mm, 4*mm, 4*mm, 2*mm
		</Vector>
		<Vector name="WebClrTh" type="numeric" nEntries="5">
			0.7*mm, 2*mm, 2*mm, 2*mm, 2*mm
		</Vector>
		<Vector name="WebLength" type="numeric" nEntries="5">
			259*mm, 250*mm, 264*mm, 287*mm, 365*mm
		</Vector>
		<!-- The crystals & web pieces get stacked inside the Half Alveolar
		     Wedge whose dimensions are mostly taken from the first crystal.
		     This is the Right-handed version which gets reflected
		     for a left handed version in the code. Both get placed
		     inside a Full Alveolar Wedge, back to back.
		     -->
		<String name="HawRName" value="EHAWR"/>
		<String name="FawName" value="EFAW"/>
		<Numeric name="FawHere" value="1"/>
		<Numeric name="HawRHBIG" value="295*mm"/>
		<Numeric name="HawRhsml" value="185*mm"/>
		<Numeric name="HawRCutY" value="20*cm"/>
		<Numeric name="HawRCutZ" value="374*mm"/>
		<Numeric name="HawRCutDelY" value="5*mm"/>
		<Numeric name="HawYOffCry" value="6*mm"/>
		<Numeric name="NFawPerSupm" value="10"/>
		<Numeric name="FawPhiOff" value="-9.757*deg"/>
		<Numeric name="FawDelPhi" value="2.0015*deg"/>
		<Numeric name="FawPhiRot" value="2.7*deg"/>
		<Numeric name="FawRadOff" value="1270*mm"/>
		<Numeric name="GridHere" value="1"/>
		<String name="GridName" value="EGRID"/>
		<String name="GridMat" value="materials:Aluminium"/>
		<Numeric name="GridThick" value="32*mm"/>
		<!-- From here on is for the material behind the crystals.
		     This does not include the grid & tablet included above,
		     but does include cooling, electronics, cables, & support plates.
		     -->
		<Numeric name="BackXOff" value="1566*mm"/>
		<Numeric name="BackYOff" value="  17*mm"/>
		<String name="BackSideName" value="EBSID"/>
		<Numeric name="BackSideHere" value="1"/>
		<Numeric name="BackSideLength" value="2874*mm"/>
		<Numeric name="BackSideHeight" value=" 148*mm"/>
		<Numeric name="BackSideWidth" value="  20*mm"/>
		<Numeric name="BackSideYOff1" value=" -18*mm"/>
		<Numeric name="BackSideYOff2" value="  14*mm"/>
		<Numeric name="BackSideAngle" value="82*deg"/>
		<String name="BackSideMat" value="materials:E_Aluminium"/>
		<Numeric name="BackHere" value="1"/>
		<String name="BackPlateName" value="EBPL"/>
		<Numeric name="BackPlateHere" value="1"/>
		<Numeric name="BackPlateLength" value="2873*mm"/>
		<Numeric name="BackPlateThick" value="  15*mm"/>
		<Numeric name="BackPlateWidth" value=" 590*mm"/>
		<String name="BackPlateMat" value="materials:StainlessSteel"/>
		<String name="BackPlate2Name" value="EBPL2"/>
		<Numeric name="BackPlate2Thick" value="  1*mm"/>
		<String name="BackPlate2Mat" value="materials:E_Aluminium"/>
		<!--
		     <String  name="BackSpacerName"    value="ESPA"  />
		     <Numeric name="BackSpacerHere"    value="1" />
		     <Numeric name="BackSpacerLength"  value="2673*mm" />
		     <Numeric name="BackSpacerThick"   value="  23*mm" />
		     <Numeric name="BackSpacerWidth"   value="  80*mm" />
		     <Numeric name="BackSpacerXOff"    value="  90*mm" />
		     <String  name="BackSpacerMat"     value="materials:E_Aluminium"  />
		     146*mm, 160*mm, 160*mm, 189*mm, 189*mm, 215*mm, 215*mm, 244*mm
		     -->
		<String name="GrilleName" value="EGRL"/>
		<Numeric name="GrilleHere" value="1"/>
		<Numeric name="GrilleThick" value=" 20*mm"/>
		<Numeric name="GrilleWidth" value="510*mm"/>
		<Numeric name="GrilleZSpace" value="5*mm"/>
		<String name="GrilleMat" value="materials:E_Aluminium"/>
		<Vector name="GrilleHeight" type="numeric" nEntries="8">
			146*mm, 156*mm, 167*mm, 167*mm, 196*mm, 196*mm, 222*mm, 231*mm
		</Vector>
		<Vector name="GrilleZOff" type="numeric" nEntries="8">
			1*mm, 680*mm,  720*mm, 1310*mm,  1350*mm, 2040*mm,  2080*mm, 2854*mm
		</Vector>
		<String name="GrEdgeSlotName" value="EGRES"/>
		<String name="GrEdgeSlotMat" value="materials:E_Air"/>
		<Numeric name="GrEdgeSlotHere" value="1"/>
		<Numeric name="GrEdgeSlotWidth" value=" 44*mm"/>
		<Numeric name="GrEdgeSlotHeight" value=" 52*mm - 10*mm"/>
		<String name="GrMidSlotName" value="EGRMS"/>
		<String name="GrMidSlotMat" value="materials:E_Cables"/>
		<Numeric name="GrMidSlotHere" value="1"/>
		<Numeric name="GrMidSlotXOff" value=" 91*mm"/>
		<Numeric name="GrMidSlotWidth" value="114*mm"/>
		<Vector name="GrMidSlotHeight" type="numeric" nEntries="4">
			24*mm, 42*mm,  59*mm, 76*mm
		</Vector>
		<Numeric name="BackPipeHere" value="1"/>
		<String name="BackPipeName" value="EBPIPE"/>
		<Vector name="BackPipeDiam" type="numeric" nEntries="4">
			22*mm, 33.7*mm,  42.4*mm, 48.3*mm
		</Vector>
		<Vector name="BackPipeThick" type="numeric" nEntries="4">
			1*mm, 1*mm,  3.2*mm, 3.2*mm
		</Vector>
		<String name="BackPipeWaterMat" value="materials:E_Water"/>
		<String name="BackPipeMat" value="materials:StainlessSteel"/>
		<Numeric name="BackCoolHere" value="1"/>
		<Vector name="BackCoolName" type="string" nEntries="4">
			EBCOOL1, EBCOOL2, EBCOOL3, EBCOOL4
		</Vector>
		<String name="BackCoolMat" value="materials:E_Air"/>
		<Numeric name="BackCoolBarWidth" value="466*mm"/>
		<Numeric name="BackCoolBarHeight" value="91*mm"/>
		<Numeric name="BackCoolBarHere" value="1"/>
		<String name="BackCoolBarName" value="EBCBAR"/>
		<Numeric name="BackCoolBarThick" value="8*mm"/>
		<String name="BackCoolBarMat" value="materials:Aluminium"/>
		<String name="BackCoolBarSSName" value="EBCBSS"/>
		<Numeric name="BackCoolBarSSThick" value="0.86*mm"/>
		<String name="BackCoolBarSSMat" value="materials:StainlessSteel"/>
		<String name="BackCoolBarWaName" value="EBCBWA"/>
		<Numeric name="BackCoolBarWaThick" value="0.55*mm"/>
		<String name="BackCoolBarWaMat" value="materials:E_Water"/>
		<Numeric name="BackCoolVFEHere" value="1"/>
		<String name="BackCoolVFEName" value="ECVFE"/>
		<String name="BackCoolVFEMat" value="materials:E_Air"/>
		<String name="BackVFEName" value="EVFE"/>
		<String name="BackVFEMat" value="materials:E_Air"/>
		<Vector name="BackVFELyrThick" type="numeric" nEntries="5">
			1*mm, 3.25*mm, 2*mm, 1*mm, 0.1*mm
		</Vector>
		<Vector name="BackVFELyrName" type="string" nEntries="5">
			EVFE_1, EVFE_2, EVFE_3, EVFE_4, EVFE_5
		</Vector>
		<Vector name="BackVFELyrMat" type="string" nEntries="5">
			materials:E_Air,
			materials:Aluminium, 
			materials:E_G10, 
			materials:E_Silicon, 
			materials:E_Copper
		</Vector>
		<Vector name="BackCoolNSec" type="numeric" nEntries="4">
			1,2,4,3
		</Vector>
		<Vector name="BackCoolSecSep" type="numeric" nEntries="6">
			50*mm, 100*mm, 54*mm, 54*mm, 77*mm, 158*mm
		</Vector>
		<Vector name="BackCoolNPerSec" type="numeric" nEntries="10">
			15,6,6,6,3,1,3,3,3,6
		</Vector>
		<Numeric name="BackCoolTankHere" value="1"/>
		<String name="BackCoolTankName" value="EBTANK"/>
		<Numeric name="BackCoolTankWidth" value="28*mm"/>
		<Numeric name="BackCoolTankThick" value="16*mm"/>
		<String name="BackCoolTankMat" value="materials:StainlessSteel"/>
		<String name="BackCoolTankWaName" value="EBTWA"/>
		<Numeric name="BackCoolTankWaWidth" value="22*mm"/>
		<String name="BackCoolTankWaMat" value="materials:E_Water"/>
		<String name="BackBracketName" value="EBBRK"/>
		<Numeric name="BackBracketHeight" value="12*mm"/>
		<String name="BackBracketMat" value="materials:Aluminium"/>
		<Numeric name="BackMiscHere" value="1"/>
		<Vector name="BackMiscThick" type="numeric" nEntries="20">
			3*mm,  4*mm, 6*mm, 2*mm, 1*mm,
			4*mm,  8*mm, 6*mm, 2*mm, 1*mm,
			5*mm, 10*mm, 6*mm, 2*mm, 1*mm,
			6*mm, 13*mm, 6*mm, 2*mm, 1*mm
		</Vector>
		<Vector name="BackMiscName" type="string" nEntries="20">
			EMAL1, EMCA1, EMG101, EMSI1, EMCU1,
			EMAL2, EMCA2, EMG102, EMSI2, EMCU2,
			EMAL3, EMCA3, EMG103, EMSI3, EMCU3,
			EMAL4, EMCA4, EMG104, EMSI4, EMCU4
		</Vector>
		<Vector name="BackMiscMat" type="string" nEntries="20">
			materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
			materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
			materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper,
			materials:Aluminium, materials:E_Cables, materials:E_G10, materials:E_Silicon, materials:E_Copper
		</Vector>
		<Numeric name="BackCBStdSep" value="36*mm"/>
		<Numeric name="PatchPanelHere" value="1"/>
		<String name="PatchPanelName" value="EPPA"/>
		<Vector name="PatchPanelThick" type="numeric" nEntries="7">
			10*mm, 80*mm, 50*mm, 10*mm, 5*mm, 50*mm, 10*mm
		</Vector>
		<Vector name="PatchPanelNames" type="string" nEntries="7">
			EPPAL, EPPCA, EPPG10, EPPSI, EPPCU, EPPWA, EPPSS
		</Vector>
		<Vector name="PatchPanelMat" type="string" nEntries="7">
			materials:Aluminium, materials:E_Cables,
			materials:E_G10, materials:E_Silicon, materials:E_Copper,
			materials:E_Water, materials:StainlessSteel
		</Vector>
		<Numeric name="DryAirTubeHere" value="1"/>
		<String name="DryAirTubeName" value="EDRY"/>
		<Numeric name="DryAirTubeInnDiam" value="5*mm"/>
		<Numeric name="DryAirTubeOutDiam" value="6*mm"/>
		<String name="DryAirTubeMat" value="materials:E_Copper"/>
		<Numeric name="MBCoolTubeHere" value="1"/>
		<String name="MBCoolTubeName" value="EMBC"/>
		<Numeric name="MBCoolTubeInnDiam" value="5*mm"/>
		<Numeric name="MBCoolTubeOutDiam" value="6*mm"/>
		<Numeric name="MBCoolTubeNum" value="9"/>
		<String name="MBCoolTubeMat" value="materials:StainlessSteel"/>
		<Numeric name="MBManifHere" value="1"/>
		<String name="MBManifName" value="EMANF"/>
		<Numeric name="MBManifInnDiam" value="13*mm"/>
		<Numeric name="MBManifOutDiam" value="15*mm"/>
		<String name="MBManifMat" value="materials:StainlessSteel"/>
		<Numeric name="MBLyrHere" value="1"/>
		<Vector name="MBLyrThick" type="numeric" nEntries="5">
			1*mm, 2.6*mm, 2*mm, 1*mm, 0.1*mm
		</Vector>
		<Vector name="MBLyrName" type="string" nEntries="5">
			EMBL1, EMBL2, EMBL3, EMBL4, EMBL5
		</Vector>
		<Vector name="MBLyrMat" type="string" nEntries="5">
			materials:E_Air,
			materials:Aluminium, 
			materials:E_G10, 
			materials:E_Silicon, 
			materials:E_Copper
		</Vector>
		<Numeric name="PincerRodHere" value="1"/>
		<String name="PincerRodName" value="EPCRROD"/>
		<String name="PincerRodMat" value="materials:E_Air"/>
		<Vector name="PincerRodAzimuth" type="numeric" nEntries="9">
			-8*deg, -6*deg, -4*deg, -2*deg, 0*deg, 2*deg, 4*deg, 6*deg, 8*deg
		</Vector>
		<String name="PincerEnvName" value="EPCRENV"/>
		<String name="PincerEnvMat" value="materials:E_Air"/>
		<Numeric name="PincerEnvWidth" value="13.6*mm"/>
		<Numeric name="PincerEnvHeight" value="9.5*mm"/>
		<Numeric name="PincerEnvLength" value="15.5*mm"/>
		<Vector name="PincerEnvZOff" type="numeric" nEntries="34">
			50.984535*mm,  98.778778*mm, 167.981033*mm, 213.184143*mm, 281.757080*mm, 327.713348*mm, 397.682068*mm,
			444.741180*mm, 516.680664*mm, 565.242798*mm, 646.232422*mm, 696.343262*mm, 772.983398*mm, 824.869385*mm,
			904.857849*mm, 959.290649*mm,1043.466309*mm,1100.898071*mm,1198.996460*mm,1260.129883*mm,1354.826782*mm,
			1419.607178*mm,1520.354248*mm,1589.457520*mm,1697.164795*mm,1771.165894*mm,1898.585449*mm,1978.222656*mm,
			2102.583740*mm,2188.188721*mm,2322.048828*mm,2414.281982*mm,2558.725098*mm,2658.347412*mm
		</Vector>
		<String name="PincerBlkName" value="EPCRBLK"/>
		<String name="PincerBlkMat" value="materials:E_Aluminium"/>
		<Numeric name="PincerBlkLength" value="15*mm"/>
		<String name="PincerShimMat" value="materials:StainlessSteel"/>
		<String name="PincerShim1Name" value="EPCRSHIM1"/>
		<Numeric name="PincerShimHeight" value="7.0*mm"/>
		<Numeric name="PincerShim1Width" value="5.1*mm"/>
		<String name="PincerShim2Name" value="EPCRSHIM2"/>
		<Numeric name="PincerShim2Width" value="0.5*mm"/>
		<String name="PincerCutName" value="EPCRCUT"/>
		<String name="PincerCutMat" value="materials:E_Air"/>
		<Numeric name="PincerCutWidth" value="5.0*mm"/>
		<Numeric name="PincerCutHeight" value="7.5*mm"/>
	</Algorithm>
</DDDefinition>