Geometry/CSCGeometry/src/CSCLayerGeometry.cc - master - githubmirror/cmssw

Geometry/CSCGeometry/src/CSCLayerGeometry.cc
328 строк13 KB
Shahzad Malik Muzaffar
[Geometry] Move public headers on to interface directory
04 авг 2021, 11:32
04 авг 2021, 11:321251d71
// This is CSCLayerGeometry.cc

#include <Geometry/CSCGeometry/interface/CSCGeometry.h>
#include <Geometry/CSCGeometry/interface/CSCLayerGeometry.h>

#include <Geometry/CSCGeometry/src/CSCUngangedStripTopology.h>
#include <Geometry/CSCGeometry/src/CSCGangedStripTopology.h>
#include <Geometry/CSCGeometry/interface/CSCWireGroupPackage.h>

#include <FWCore/MessageLogger/interface/MessageLogger.h>

#include "DataFormats/Math/interface/GeantUnits.h"

#include <algorithm>
#include <iostream>

using namespace geant_units;
using namespace geant_units::operators;

// Complicated initialization list since the chamber Bounds passed in must have its thickness reset to that of the layer
// Note for half-widths, t + b = 2w and the TPB only has accessors for t and w so b = 2w - t

CSCLayerGeometry::CSCLayerGeometry(const CSCGeometry* geom,
                                   int iChamberType,
                                   const TrapezoidalPlaneBounds& bounds,
                                   int nstrips,
                                   float stripOffset,
                                   float stripPhiPitch,
                                   float whereStripsMeet,
                                   float extentOfStripPlane,
                                   float yCentreOfStripPlane,
                                   const CSCWireGroupPackage& wg,
                                   float wireAngleInDegrees,
                                   double yOfFirstWire,
                                   float hThickness)
    : TrapezoidalPlaneBounds(
          bounds.widthAtHalfLength() - bounds.width() / 2., bounds.width() / 2., bounds.length() / 2., hThickness),
      theWireTopology(nullptr),
      theStripTopology(nullptr),
      hBottomEdge(bounds.widthAtHalfLength() - bounds.width() / 2.),
      hTopEdge(bounds.width() / 2.),
      apothem(bounds.length() / 2.),
      myName("CSCLayerGeometry"),
      chamberType(iChamberType) {
  LogTrace("CSCLayerGeometry|CSC") << myName << ": being constructed, this=" << this;

  // Ganged strips in ME1A?
  bool gangedME1A = (iChamberType == 1 && geom->gangedStrips());

  CSCStripTopology* aStripTopology = new CSCUngangedStripTopology(
      nstrips, stripPhiPitch, extentOfStripPlane, whereStripsMeet, stripOffset, yCentreOfStripPlane);

  if (gangedME1A) {
    theStripTopology = new CSCGangedStripTopology(*aStripTopology, 16);
    delete aStripTopology;
  } else {
    theStripTopology = aStripTopology;
  }

  if (!geom->realWireGeometry()) {
    // Approximate ORCA_8_8_0 and earlier calculated geometry...
    float wangler = convertDegToRad(wireAngleInDegrees);
    float wireCos = cos(wangler);
    float wireSin = sin(wangler);
    float y2 = apothem * wireCos + hBottomEdge * fabs(wireSin);
    float wireSpacing = convertMmToCm(wg.wireSpacing);
    float wireOffset = -y2 + wireSpacing / 2.;
    yOfFirstWire = wireOffset / wireCos;
  }

  theWireTopology = new CSCWireTopology(wg, yOfFirstWire, wireAngleInDegrees);
  LogTrace("CSCLayerGeometry|CSC") << myName << ": constructed: " << *this;
}

CSCLayerGeometry::CSCLayerGeometry(const CSCLayerGeometry& melg)
    : TrapezoidalPlaneBounds(melg.hBottomEdge, melg.hTopEdge, melg.apothem, 0.5 * melg.thickness()),
      theWireTopology(nullptr),
      theStripTopology(nullptr),
      hBottomEdge(melg.hBottomEdge),
      hTopEdge(melg.hTopEdge),
      apothem(melg.apothem),
      chamberType(melg.chamberType) {
  // CSCStripTopology is abstract, so need clone()
  if (melg.theStripTopology)
    theStripTopology = melg.theStripTopology->clone();
  // CSCWireTopology is concrete, so direct copy
  if (melg.theWireTopology)
    theWireTopology = new CSCWireTopology(*(melg.theWireTopology));
}

CSCLayerGeometry& CSCLayerGeometry::operator=(const CSCLayerGeometry& melg) {
  if (&melg != this) {
    delete theStripTopology;
    if (melg.theStripTopology)
      theStripTopology = melg.theStripTopology->clone();
    else
      theStripTopology = nullptr;

    delete theWireTopology;
    if (melg.theWireTopology)
      theWireTopology = new CSCWireTopology(*(melg.theWireTopology));
    else
      theWireTopology = nullptr;

    hBottomEdge = melg.hBottomEdge;
    hTopEdge = melg.hTopEdge;
    apothem = melg.apothem;
  }
  return *this;
}

CSCLayerGeometry::~CSCLayerGeometry() {
  LogTrace("CSCLayerGeometry|CSC") << myName << ": being destroyed, this=" << this
                                   << "\nDeleting theStripTopology=" << theStripTopology
                                   << " and theWireTopology=" << theWireTopology;
  delete theStripTopology;
  delete theWireTopology;
}

LocalPoint CSCLayerGeometry::stripWireIntersection(int strip, float wire) const {
  // This allows _float_ wire no. so that we can calculate the
  // intersection of a strip with the mid point of a wire group
  // containing an even no. of wires (which is not an actual wire),
  // as well as for a group containing an odd no. of wires.

  // Equation of wire and strip as straight lines in local xy
  // y = mx + c where m = tan(angle w.r.t. x axis)
  // At the intersection x = -(cs-cw)/(ms-mw)
  // At y=0, 0 = ms * xOfStrip(strip) + cs => cs = -ms*xOfStrip
  // At x=0, yOfWire(wire) = 0 + cw => cw = yOfWire

  float ms = tan(stripAngle(strip));
  float mw = tan(wireAngle());
  float xs = xOfStrip(strip);
  float xi = (ms * xs + yOfWire(wire)) / (ms - mw);
  float yi = ms * (xi - xs);

  return LocalPoint(xi, yi);
}

LocalPoint CSCLayerGeometry::stripWireGroupIntersection(int strip, int wireGroup) const {
  // middleWire is only an actual wire for a group with an odd no. of wires
  float middleWire = middleWireOfGroup(wireGroup);
  return stripWireIntersection(strip, middleWire);
}

float CSCLayerGeometry::stripAngle(int strip) const {
  // Cleverly subtly change meaning of stripAngle once more.
  // In TrapezoidalStripTopology it is angle measured
  // counter-clockwise from y axis.
  // In APTST and RST it is angle measured
  // clockwise from y axis.
  // Output of this function is measured counter-clockwise
  // from x-axis, so it is a conventional 2-dim azimuthal angle
  // in the (x,y) local coordinates

  // We want angle at centre of strip (strip N covers
  // *float* range N-1 to N-epsilon)

  return 0.5_pi - theStripTopology->stripAngle(strip - 0.5);
}

LocalPoint CSCLayerGeometry::localCenterOfWireGroup(int wireGroup) const {
  // It can use CSCWireTopology::yOfWireGroup for y,
  // But x requires mixing with 'extent' of wire plane

  // If the wires are NOT tilted, default to simple calculation...
  if (fabs(wireAngle()) < 1.E-6) {
    float y = yOfWireGroup(wireGroup);
    return LocalPoint(0., y);
  } else {
    // w is "wire" at the center of the wire group
    float w = middleWireOfGroup(wireGroup);
    std::vector<float> store = theWireTopology->wireValues(w);
    return LocalPoint(store[0], store[1]);
  }
}

float CSCLayerGeometry::lengthOfWireGroup(int wireGroup) const {
  // Return length of 'wire' in the middle of the wire group
  float w = middleWireOfGroup(wireGroup);
  std::vector<float> store = theWireTopology->wireValues(w);
  return store[2];
}

std::pair<LocalPoint, float> CSCLayerGeometry::possibleRecHitPosition(float s, int w1, int w2) const {
  LocalPoint sw1 = intersectionOfStripAndWire(s, w1);
  LocalPoint sw2 = intersectionOfStripAndWire(s, w2);

  // Average the two points
  LocalPoint midpt((sw1.x() + sw2.x()) / 2., (sw1.y() + sw2.y()) / 2);

  // Length of strip crossing this group of wires
  float length = sqrt((sw1.x() - sw2.x()) * (sw1.x() - sw2.x()) + (sw1.y() - sw2.y()) * (sw1.y() - sw2.y()));

  return std::pair<LocalPoint, float>(midpt, length);
}

LocalPoint CSCLayerGeometry::intersectionOfStripAndWire(float s, int w) const {
  std::pair<float, float> pw = theWireTopology->equationOfWire(static_cast<float>(w));
  std::pair<float, float> ps = theStripTopology->equationOfStrip(s);
  LocalPoint sw = intersectionOfTwoLines(ps, pw);

  // If point falls outside wire plane, at extremes in local y,
  // replace its y by that of appropriate edge of wire plane
  if (!(theWireTopology->insideYOfWirePlane(sw.y()))) {
    float y = theWireTopology->restrictToYOfWirePlane(sw.y());
    // and adjust x to match new y
    float x = sw.x() + (y - sw.y()) * tan(theStripTopology->stripAngle(s));
    sw = LocalPoint(x, y);
  }

  return sw;
}

LocalPoint CSCLayerGeometry::intersectionOfTwoLines(std::pair<float, float> p1, std::pair<float, float> p2) const {
  // Calculate the point of intersection of two straight lines (in 2-dim)
  // input arguments are pair(m1,c1) and pair(m2,c2) where m=slope, c=intercept (y=mx+c)
  // BEWARE! Do not call with m1 = m2 ! No trapping !

  float m1 = p1.first;
  float c1 = p1.second;
  float m2 = p2.first;
  float c2 = p2.second;
  float x = (c2 - c1) / (m1 - m2);
  float y = (m1 * c2 - m2 * c1) / (m1 - m2);
  return LocalPoint(x, y);
}

LocalError CSCLayerGeometry::localError(int strip, float sigmaStrip, float sigmaWire) const {
  // Input sigmas are expected to be in _distance units_
  // - uncertainty in strip measurement (typically from Gatti fit, value is in local x units)
  // - uncertainty in wire measurement (along direction perpendicular to wires)

  float wangle = this->wireAngle();
  float strangle = this->stripAngle(strip);

  float sinAngdif = sin(strangle - wangle);
  float sinAngdif2 = sinAngdif * sinAngdif;

  float du = sigmaStrip / sin(strangle);  // sigmaStrip is just x-component of strip error
  float dv = sigmaWire;

  // The notation is
  // wsins = wire resol  * sin(strip angle)
  // wcoss = wire resol  * cos(strip angle)
  // ssinw = strip resol * sin(wire angle)
  // scosw = strip resol * cos(wire angle)

  float wsins = dv * sin(strangle);
  float wcoss = dv * cos(strangle);
  float ssinw = du * sin(wangle);
  float scosw = du * cos(wangle);

  float dx2 = (scosw * scosw + wcoss * wcoss) / sinAngdif2;
  float dy2 = (ssinw * ssinw + wsins * wsins) / sinAngdif2;
  float dxy = (scosw * ssinw + wcoss * wsins) / sinAngdif2;

  return LocalError(dx2, dxy, dy2);
}

bool CSCLayerGeometry::inside(const Local3DPoint& lp) const {
  bool result = false;
  const float epsilon = 1.e-06;
  if (fabs(lp.z()) < thickness() / 2.) {  // thickness of TPB is that of gas layer
    std::pair<float, float> ylims = yLimitsOfStripPlane();
    if ((lp.y() > ylims.first) && (lp.y() < ylims.second)) {
      // 'strip' returns float value between 0. and float(Nstrips) and value outside
      // is set to 0. or float(Nstrips)... add a conservative precision of 'epsilon'
      if ((theStripTopology->strip(lp) > epsilon) && (theStripTopology->strip(lp) < (numberOfStrips() - epsilon)))
        result = true;
    }
  }
  return result;
}

bool CSCLayerGeometry::inside(const Local2DPoint& lp) const {
  LocalPoint lp2(lp.x(), lp.y(), 0.);
  return inside(lp2);
}

bool CSCLayerGeometry::inside(const Local3DPoint& lp, const LocalError& le, float scale) const {
  // Effectively consider that the LocalError components extend the area which is acceptable.
  // Form a little box centered on the point, with x, y diameters defined by the errors
  // and require that ALL four corners of the box fall outside the strip region for failure

  // Note that LocalError is 2-dim x,y and doesn't supply a z error
  float deltaX = scale * sqrt(le.xx());
  float deltaY = scale * sqrt(le.yy());

  LocalPoint lp1(lp.x() - deltaX, lp.y() - deltaY, lp.z());
  LocalPoint lp2(lp.x() - deltaX, lp.y() + deltaY, lp.z());
  LocalPoint lp3(lp.x() + deltaX, lp.y() + deltaY, lp.z());
  LocalPoint lp4(lp.x() + deltaX, lp.y() - deltaY, lp.z());

  return (inside(lp1) || inside(lp2) || inside(lp3) || inside(lp4));
}

void CSCLayerGeometry::setTopology(CSCStripTopology* newTopology) {
  delete theStripTopology;
  theStripTopology = newTopology;
}

std::ostream& operator<<(std::ostream& stream, const CSCLayerGeometry& lg) {
  stream << "LayerGeometry " << std::endl
         << "------------- " << std::endl
         << "numberOfStrips               " << lg.numberOfStrips() << std::endl
         << "numberOfWires                " << lg.numberOfWires() << std::endl
         << "numberOfWireGroups           " << lg.numberOfWireGroups() << std::endl
         << "wireAngle  (rad)             " << lg.wireAngle()
         << std::endl
         //         << "wireAngle  (deg)      " << lg.theWireAngle << std::endl
         //         << "sin(wireAngle)        " << lg.theWireSin << std::endl
         //         << "cos(wireAngle)        " << lg.theWireCos << std::endl
         << "wirePitch                    " << lg.wirePitch() << std::endl
         << "stripPitch                   " << lg.stripPitch()
         << std::endl
         //         << "numberOfWiresPerGroup " << lg.theNumberOfWiresPerGroup << std::endl
         //         << "numberOfWiresInLastGroup " << lg.theNumberOfWiresInLastGroup << std::endl
         //         << "wireOffset            " << lg.theWireOffset << std::endl
         //         << "whereStripsMeet       " << lg.whereStripsMeet << std::endl;
         << "hBottomEdge                  " << lg.hBottomEdge << std::endl
         << "hTopEdge                     " << lg.hTopEdge << std::endl
         << "apothem                      " << lg.apothem << std::endl
         << "length (should be 2xapothem) " << lg.length() << std::endl
         << "thickness                    " << lg.thickness() << std::endl;
  return stream;
}