Alignment/CommonAlignmentParametrization/src/TwoBowedSurfacesAlignmentParameters.cc - master - githubmirror/cmssw

Alignment/CommonAlignmentParametrization/src/TwoBowedSurfacesAlignmentParameters.cc
286 строк15 KB
Shahzad Malik Muzaffar
[ALCA-DB] [LLVM21] Apply clang-tidy changes
26 ноя 2025, 17:09
26 ноя 2025, 17:093994667
/** \file TwoBowedSurfacesAlignmentParameters.cc
 *
 *  Version    : $Revision: 1.2 $
 *  last update: $Date: 2010/11/23 13:50:50 $
 *  by         : $Author: flucke $
 */

#include "FWCore/MessageLogger/interface/MessageLogger.h"
#include "FWCore/Utilities/interface/Exception.h"

#include "TrackingTools/TrajectoryState/interface/TrajectoryStateOnSurface.h"

#include "Alignment/CommonAlignment/interface/Alignable.h"
#include "Alignment/CommonAlignment/interface/AlignableDetOrUnitPtr.h"
#include "Alignment/CommonAlignmentParametrization/interface/AlignmentParametersFactory.h"
#include "Alignment/CommonAlignmentParametrization/interface/KarimakiAlignmentDerivatives.h"
#include "CondFormats/Alignment/interface/Definitions.h"
//#include "DataFormats/Alignment/interface/SurfaceDeformation.h"
#include "Geometry/CommonTopologies/interface/TwoBowedSurfacesDeformation.h"

// This class's header
#include "Alignment/CommonAlignmentParametrization/interface/TwoBowedSurfacesAlignmentParameters.h"

#include <cmath>
#include <iostream>
//_________________________________________________________________________________________________
TwoBowedSurfacesAlignmentParameters::TwoBowedSurfacesAlignmentParameters(Alignable *ali)
    : AlignmentParameters(ali, AlgebraicVector(N_PARAM), AlgebraicSymMatrix(N_PARAM, 0)),
      ySplit_(this->ySplitFromAlignable(ali)) {}

//_________________________________________________________________________________________________
TwoBowedSurfacesAlignmentParameters ::TwoBowedSurfacesAlignmentParameters(Alignable *alignable,
                                                                          const AlgebraicVector &parameters,
                                                                          const AlgebraicSymMatrix &covMatrix)
    : AlignmentParameters(alignable, parameters, covMatrix), ySplit_(this->ySplitFromAlignable(alignable)) {
  if (parameters.num_row() != N_PARAM) {
    throw cms::Exception("BadParameters") << "in TwoBowedSurfacesAlignmentParameters(): " << parameters.num_row()
                                          << " instead of " << N_PARAM << " parameters.";
  }
}

//_________________________________________________________________________________________________
TwoBowedSurfacesAlignmentParameters ::TwoBowedSurfacesAlignmentParameters(Alignable *alignable,
                                                                          const AlgebraicVector &parameters,
                                                                          const AlgebraicSymMatrix &covMatrix,
                                                                          const std::vector<bool> &selection)
    : AlignmentParameters(alignable, parameters, covMatrix, selection), ySplit_(this->ySplitFromAlignable(alignable)) {
  if (parameters.num_row() != N_PARAM) {
    throw cms::Exception("BadParameters") << "in TwoBowedSurfacesAlignmentParameters(): " << parameters.num_row()
                                          << " instead of " << N_PARAM << " parameters.";
  }
}

//_________________________________________________________________________________________________
TwoBowedSurfacesAlignmentParameters *TwoBowedSurfacesAlignmentParameters::clone(
    const AlgebraicVector &parameters, const AlgebraicSymMatrix &covMatrix) const {
  TwoBowedSurfacesAlignmentParameters *rbap =
      new TwoBowedSurfacesAlignmentParameters(this->alignable(), parameters, covMatrix, selector());

  if (this->userVariables())
    rbap->setUserVariables(this->userVariables()->clone());
  rbap->setValid(this->isValid());

  return rbap;
}

//_________________________________________________________________________________________________
TwoBowedSurfacesAlignmentParameters *TwoBowedSurfacesAlignmentParameters::cloneFromSelected(
    const AlgebraicVector &parameters, const AlgebraicSymMatrix &covMatrix) const {
  return this->clone(this->expandVector(parameters, this->selector()),
                     this->expandSymMatrix(covMatrix, this->selector()));
}

//_________________________________________________________________________________________________
AlgebraicMatrix TwoBowedSurfacesAlignmentParameters::derivatives(const TrajectoryStateOnSurface &tsos,
                                                                 const AlignableDetOrUnitPtr &alidet) const {
  const Alignable *ali = this->alignable();  // Alignable of these parameters
  AlgebraicMatrix result(N_PARAM, 2);        // initialised with zeros

  if (ali == alidet) {
    const AlignableSurface &surf = ali->surface();

    // matrix of dimension BowedDerivs::N_PARAM x 2
    const AlgebraicMatrix derivs(BowedDerivs()(tsos, surf.width(), surf.length(), true, ySplit_));  // split at ySplit_!

    // Parameters belong to surface part with y < ySplit_ or y >= ySplit_?
    const double localY = tsos.localParameters().mixedFormatVector()[4];
    const unsigned int indexOffset = (localY < ySplit_ ? 0 : dx2);
    // Copy derivatives to relevant part of result
    for (unsigned int i = BowedDerivs::dx; i < BowedDerivs::N_PARAM; ++i) {
      result[indexOffset + i][0] = derivs[i][0];
      result[indexOffset + i][1] = derivs[i][1];
    }
  } else {
    // The following is even more difficult for
    // TwoBowedSurfacesAlignmentParameters than for
    // BowedSurfaceAlignmentParameters where this text comes from:
    //
    // We could give this a meaning by applying frame-to-frame derivatives
    // to the rigid body part of the parameters (be careful that alpha ~=
    // dslopeY and beta ~= -dslopeX, but with changed scale!) and keep the
    // surface structure parameters untouched in local meaning. In this way we
    // could do higher level alignment and determine 'average' surface
    // structures for the components.
    throw cms::Exception("MisMatch") << "TwoBowedSurfacesAlignmentParameters::derivatives: The hit "
                                        "alignable must match the "
                                     << "aligned one (i.e. bowed surface parameters cannot be used for "
                                        "composed alignables)\n";
  }

  return result;
}

//_________________________________________________________________________________________________
void TwoBowedSurfacesAlignmentParameters::apply() {
  Alignable *alignable = this->alignable();
  if (!alignable) {
    throw cms::Exception("BadParameters") << "TwoBowedSurfacesAlignmentParameters::apply: parameters without "
                                             "alignable";
  }

  // Some repeatedly needed variables
  const AlignableSurface &surface = alignable->surface();
  const double halfLength = surface.length() * 0.5;         // full module
  const double halfLength1 = (halfLength + ySplit_) * 0.5;  // low-y surface
  const double halfLength2 = (halfLength - ySplit_) * 0.5;  // high-y surface

  // first copy the parameters into separate parts for the two surfaces
  const AlgebraicVector &params = theData->parameters();
  std::vector<double> rigidBowPar1(BowedDerivs::N_PARAM);  // 1st surface (y <  ySplit_)
  std::vector<double> rigidBowPar2(BowedDerivs::N_PARAM);  // 2nd surface (y >= ySplit_)
  for (unsigned int i = 0; i < BowedDerivs::N_PARAM; ++i) {
    rigidBowPar1[i] = params[i];
    rigidBowPar2[i] = params[i + BowedDerivs::N_PARAM];
  }
  // Now adjust slopes to angles, note that dslopeX <-> -beta & dslopeY <->
  // alpha, see BowedSurfaceAlignmentParameters::rotation(): FIXME: use atan?
  rigidBowPar1[3] = params[dslopeY1] / halfLength1;               // alpha1
  rigidBowPar2[3] = params[dslopeY2] / halfLength2;               // alpha2
  rigidBowPar1[4] = -params[dslopeX1] / (surface.width() * 0.5);  // beta1
  rigidBowPar2[4] = -params[dslopeX2] / (surface.width() * 0.5);  // beta2
  // gamma is simply scaled
  const double gammaScale1 = BowedDerivs::gammaScale(surface.width(), 2.0 * halfLength1);
  rigidBowPar1[5] = params[drotZ1] / gammaScale1;
  //   const double gammaScale2 = std::sqrt(halfLength2 * halfLength2
  // 				       + surface.width() * surface.width()/4.);
  const double gammaScale2 = BowedDerivs::gammaScale(surface.width(), 2.0 * halfLength2);
  rigidBowPar2[5] = params[drotZ2] / gammaScale2;

  // Get rigid body rotations of full module as mean of the two surfaces:
  align::EulerAngles angles(3);  // to become 'common' rotation in local frame
  for (unsigned int i = 0; i < 3; ++i) {
    angles[i] = (rigidBowPar1[i + 3] + rigidBowPar2[i + 3]) * 0.5;
  }
  // Module rotations are around other axes than the one we determined,
  // so we have to correct that the surfaces are shifted by the rotation around
  // the module axis - in linear approximation just an additional shift:
  const double yMean1 = -halfLength + halfLength1;  // y of alpha1 rotation axis in module frame
  const double yMean2 = halfLength - halfLength2;   // y of alpha2 rotation axis in module frame
  rigidBowPar1[dz1] -= angles[0] * yMean1;          // correct w1 for alpha
  rigidBowPar2[dz1] -= angles[0] * yMean2;          // correct w2 for alpha
  // Nothing for beta1/2 since anyway both around the y-axis of the module.
  rigidBowPar1[dx1] += angles[2] * yMean1;  // correct x1 for gamma
  rigidBowPar2[dx1] += angles[2] * yMean2;  // correct x1 for gamma

  // Get rigid body shifts of full module as mean of the two surfaces:
  const align::LocalVector shift((rigidBowPar1[dx1] + rigidBowPar2[dx1]) * 0.5,   // dx1!
                                 (rigidBowPar1[dy1] + rigidBowPar2[dy1]) * 0.5,   // dy1!
                                 (rigidBowPar1[dz1] + rigidBowPar2[dz1]) * 0.5);  // dz1!
  // Apply module shift and rotation:
  alignable->move(surface.toGlobal(shift));
  // original code:
  //  alignable->rotateInLocalFrame( align::toMatrix(angles) );
  // correct for rounding errors:
  align::RotationType rot(surface.toGlobal(align::toMatrix(angles)));
  align::rectify(rot);
  alignable->rotateInGlobalFrame(rot);

  // only update the surface deformations if they were selected for alignment
  if (selector()[dsagittaX1] || selector()[dsagittaXY1] || selector()[dsagittaY1] || selector()[dsagittaX2] ||
      selector()[dsagittaXY2] || selector()[dsagittaY2]) {
    // Fill surface structures with mean bows and half differences for all
    // parameters:
    std::vector<align::Scalar> deformations;
    deformations.reserve(13);
    // first part: average bows
    deformations.push_back((params[dsagittaX1] + params[dsagittaX2]) * 0.5);
    deformations.push_back((params[dsagittaXY1] + params[dsagittaXY2]) * 0.5);
    deformations.push_back((params[dsagittaY1] + params[dsagittaY2]) * 0.5);
    // second part: half difference of all corrections
    for (unsigned int i = 0; i < BowedDerivs::N_PARAM; ++i) {
      // sign means that we have to apply e.g.
      // - sagittaX for sensor 1: deformations[0] + deformations[9]
      // - sagittaX for sensor 2: deformations[0] - deformations[9]
      // - additional dx for sensor 1:  deformations[3]
      // - additional dx for sensor 2: -deformations[3]
      deformations.push_back((rigidBowPar1[i] - rigidBowPar2[i]) * 0.5);
    }
    // finally: keep track of where we have split the module
    deformations.push_back(ySplit_);  // index is 12

    const TwoBowedSurfacesDeformation deform{deformations};

    // FIXME: true to propagate down?
    //        Needed for hierarchy with common deformation parameter,
    //        but that is not possible now anyway.
    alignable->addSurfaceDeformation(&deform, false);
  }
}

//_________________________________________________________________________________________________
int TwoBowedSurfacesAlignmentParameters::type() const { return AlignmentParametersFactory::kTwoBowedSurfaces; }

//_________________________________________________________________________________________________
void TwoBowedSurfacesAlignmentParameters::print() const {
  std::cout << "Contents of TwoBowedSurfacesAlignmentParameters:"
            << "\nParameters: " << theData->parameters() << "\nCovariance: " << theData->covariance() << std::endl;
}

//_________________________________________________________________________________________________
double TwoBowedSurfacesAlignmentParameters::ySplitFromAlignable(const Alignable *ali) const {
  if (!ali)
    return 0.;

  const align::PositionType &pos(ali->globalPosition());
  const double r = pos.perp();

  // The returned numbers for TEC are calculated as stated below from
  // what is found in CMS-NOTE 2003/20.
  // Note that at that time it was planned to use ST sensors for the outer TEC
  // while in the end there are only a few of them in the tracker - the others
  // are HPK. No idea whether there are subtle changes in geometry. The numbers
  // have been cross checked with y-residuals in data, see
  // https://hypernews.cern.ch/HyperNews/CMS/get/recoTracking/1018/1/1/2/1/1/1/2/1.html.

  if (r < 58.) {  // Pixel, TIB, TID or TEC ring 1-4
    edm::LogError("Alignment") << "@SUB=TwoBowedSurfacesAlignmentParameters::ySplitFromAlignable"
                               << "There are no split modules for radii < 58, but r = " << r;
    return 0.;
  } else if (fabs(pos.z()) < 118.) {  // TOB
    return 0.;
  } else if (r > 90.) {  // TEC ring 7
    // W7a Height active= 106.900mm (Tab. 2) (but 106.926 mm p. 40!?)
    // W7a R min active = 888.400mm (Paragraph 5.5.7)
    // W7a R max active = W7a R min active + W7a Height active =
    //                  = 888.400mm + 106.900mm = 995.300mm
    // W7b Height active=  94.900mm (Tab. 2)  (but 94.876 mm p. 41!?)
    // W7b R min active = 998.252mm (Paragraph 5.5.8)
    // W7b R max active = 998.252mm + 94.900mm = 1093.152mm
    // mean radius module = 0.5*(1093.152mm + 888.400mm) = 990.776mm
    // mean radius gap = 0.5*(998.252mm + 995.300mm) = 996.776mm
    // ySplit = (mean radius gap - mean radius module) // local y and r have
    // same directions!
    //        = 996.776mm - 990.776mm = 6mm
    return 0.6;
  } else if (r > 75.) {  // TEC ring 6
    // W6a Height active= 96.100mm (Tab. 2) (but 96.136 mm p. 38!?)
    // W6a R min active = 727.000mm (Paragraph 5.5.5)
    // W6a R max active = W6a R min active + W6a Height active =
    //                  = 727.000mm + 96.100mm = 823.100mm
    // W6b Height active= 84.900mm (Tab. 2) (but 84.936 mm p. 39!?)
    // W6b R min active = 826.060mm (Paragraph 5.5.6)
    // W6b R max active = 826.060mm + 84.900mm = 910.960mm
    // mean radius module = 0.5*(910.960mm + 727.000mm) = 818.980mm
    // mean radius gap = 0.5*(826.060mm + 823.100mm) = 824.580mm
    //          -1: local y and r have opposite directions!
    // ySplit = -1*(mean radius gap - mean radius module)
    //        = -1*(824.580mm - 818.980mm) = -5.6mm
    return -0.56;
  } else {  // TEC ring 5 - smaller radii alreay excluded before
    // W5a Height active= 81.200mm (Tab. 2) (but 81.169 mm p. 36!?)
    // W5a R min active = 603.200mm (Paragraph 5.5.3)
    // W5a R max active = W5a R min active + W5a Height active =
    //                  = 603.200mm + 81.200mm = 684.400mm
    // W5b Height active= 63.200mm (Tab. 2) (63.198 mm on p. 37)
    // W5b R min active = 687.293mm (Abschnitt 5.5.4 der note)
    // W5b R max active = 687.293mm + 63.200mm = 750.493mm
    // mean radius module = 0.5*(750.493mm + 603.200mm) = 676.8465mm
    // mean radius gap = 0.5*(687.293mm + 684.400mm) = 685.8465mm
    //          -1: local y and r have opposite directions!
    // ySplit = -1*(mean radius gap - mean radius module)
    //        = -1*(685.8465mm - 676.8465mm) = -9mm
    return -0.9;
  }
  //  return 0.;
}