/
githubmirror
/
ceph
Обзор
Документация
Войти
/
githubmirror
/
ceph
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
main
doc/mgr/progress.rst
58 строк
1 KB
Zac Dover
doc/mgr: edit progress.rst
02 июн 2025, 05:37
02 июн 2025, 05:37
37ceacc
Код
Авторство
О чём код?
Progress Module =============== The progress module is used to inform users about the recovery progress of PGs (Placement Groups) that are affected by events such as (1) OSDs being marked in or out and (2) ``pg_autoscaler`` trying to match the target PG number. The ``ceph -status`` (or ``ceph -s``) command returns "Global Recovery Progress", which reports the overall recovery progress of PGs and is based on the number of PGs that are in the ``active+clean`` state. Enabling -------- The *progress* module is enabled by default, but it can be enabled manually by running the following command: .. prompt:: bash # ceph progress on The module can be disabled at anytime by running the following command: .. prompt:: bash # ceph progress off Commands -------- Show the summary of all the ongoing and completed events and their duration: .. prompt:: bash # ceph progress Show the summary of ongoing and completed events in JSON format: .. prompt:: bash # ceph progress json Clear all ongoing and completed events: .. prompt:: bash # ceph progress clear PG Recovery Event ----------------- An event for each PG affected by recovery can be shown in ``ceph progress``. This is optional, and is disabled by default due to CPU overhead that may adversely affect the Monitors: .. prompt:: bash # ceph config set mgr mgr/progress/allow_pg_recovery_event true