/
githubmirror
/
ceph
Обзор
Документация
Войти
/
githubmirror
/
ceph
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
main
doc/dev/deduplication.rst
423 строки
15 KB
Daniel Parkes
doc/dev: Fix typos in files cephfs-mirroring.rst and deduplication.rst
19 сен 2023, 01:39
19 сен 2023, 01:39
06358e8
Код
Авторство
О чём код?
=============== Deduplication =============== Introduction ============ Applying data deduplication on an existing software stack is not easy due to additional metadata management and original data processing procedure. In a typical deduplication system, the input source as a data object is split into multiple chunks by a chunking algorithm. The deduplication system then compares each chunk with the existing data chunks, stored in the storage previously. To this end, a fingerprint index that stores the hash value of each chunk is employed by the deduplication system in order to easily find the existing chunks by comparing hash value rather than searching all contents that reside in the underlying storage. There are many challenges in order to implement deduplication on top of Ceph. Among them, two issues are essential for deduplication. First is managing scalability of fingerprint index; Second is it is complex to ensure compatibility between newly applied deduplication metadata and existing metadata. Key Idea ======== 1. Content hashing (Double hashing): Each client can find an object data for an object ID using CRUSH. With CRUSH, a client knows object's location in Base tier. By hashing object's content at Base tier, a new OID (chunk ID) is generated. Chunk tier stores in the new OID that has a partial content of original object. Client 1 -> OID=1 -> HASH(1's content)=K -> OID=K -> CRUSH(K) -> chunk's location 2. Self-contained object: The external metadata design makes difficult for integration with storage feature support since existing storage features cannot recognize the additional external data structures. If we can design data deduplication system without any external component, the original storage features can be reused. More details in https://ieeexplore.ieee.org/document/8416369 Design ====== .. ditaa:: +-------------+ | Ceph Client | +------+------+ ^ Tiering is | Transparent | Metadata to Ceph | +---------------+ Client Ops | | | | +----->+ Base Pool | | | | | | | +-----+---+-----+ | | | ^ v v | | Dedup metadata in Base Pool +------+----+--+ | | (Dedup metadata contains chunk offsets | Objecter | | | and fingerprints) +-----------+--+ | | ^ | | Data in Chunk Pool | v | | +-----+---+-----+ | | | +----->| Chunk Pool | | | +---------------+ Data Pool-based object management: We define two pools. The metadata pool stores metadata objects and the chunk pool stores chunk objects. Since these two pools are divided based on the purpose and usage, each pool can be managed more efficiently according to its different characteristics. Base pool and the chunk pool can separately select a redundancy scheme between replication and erasure coding depending on its usage and each pool can be placed in a different storage location depending on the required performance. Regarding how to use, please see ``osd_internals/manifest.rst`` Usage Patterns ============== Each Ceph interface layer presents unique opportunities and costs for deduplication and tiering in general. RadosGW ------- S3 big data workloads seem like a good opportunity for deduplication. These objects tend to be write once, read mostly objects which don't see partial overwrites. As such, it makes sense to fingerprint and dedup up front. Unlike cephfs and rbd, radosgw has a system for storing explicit metadata in the head object of a logical s3 object for locating the remaining pieces. As such, radosgw could use the refcounting machinery (``osd_internals/refcount.rst``) directly without needing direct support from rados for manifests. RBD/Cephfs ---------- RBD and CephFS both use deterministic naming schemes to partition block devices/file data over rados objects. As such, the redirection metadata would need to be included as part of rados, presumably transparently. Moreover, unlike radosgw, rbd/cephfs rados objects can see overwrites. For those objects, we don't really want to perform dedup, and we don't want to pay a write latency penalty in the hot path to do so anyway. As such, performing tiering and dedup on cold objects in the background is likely to be preferred. One important wrinkle, however, is that both rbd and cephfs workloads often feature usage of snapshots. This means that the rados manifest support needs robust support for snapshots. RADOS Machinery =============== For more information on rados redirect/chunk/dedup support, see ``osd_internals/manifest.rst``. For more information on rados refcount support, see ``osd_internals/refcount.rst``. Status and Future Work ====================== At the moment, there exists some preliminary support for manifest objects within the OSD as well as a dedup tool. RadosGW data warehouse workloads probably represent the largest opportunity for this feature, so the first priority is probably to add direct support for fingerprinting and redirects into the refcount pool to radosgw. Aside from radosgw, completing work on manifest object support in the OSD particularly as it relates to snapshots would be the next step for rbd and cephfs workloads. How to use deduplication ======================== * This feature is highly experimental and is subject to change or removal. Ceph provides deduplication using RADOS machinery. Below we explain how to perform deduplication. Prerequisite ------------ If the Ceph cluster is started from Ceph mainline, users need to check ``ceph-test`` package which is including ceph-dedup-tool is installed. Deatiled Instructions --------------------- Users can use ceph-dedup-tool with ``estimate``, ``sample-dedup``, ``chunk-scrub``, and ``chunk-repair`` operations. To provide better convenience for users, we have enabled necessary operations through ceph-dedup-tool, and we recommend using the following operations freely by using any types of scripts. 1. Estimate space saving ratio of a target pool using ``ceph-dedup-tool``. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. code:: bash ceph-dedup-tool --op estimate --pool [BASE_POOL] --chunk-size [CHUNK_SIZE] --chunk-algorithm [fixed|fastcdc] --fingerprint-algorithm [sha1|sha256|sha512] --max-thread [THREAD_COUNT] This CLI command will show how much storage space can be saved when deduplication is applied on the pool. If the amount of the saved space is higher than user's expectation, the pool probably is worth performing deduplication. Users should specify the ``BASE_POOL``, within which the object targeted for deduplication is stored. The users also need to run ceph-dedup-tool multiple time with varying ``chunk_size`` to find the optimal chunk size. Note that the optimal value probably differs in the content of each object in case of fastcdc chunk algorithm (not fixed). Example output: .. code:: bash { "chunk_algo": "fastcdc", "chunk_sizes": [ { "target_chunk_size": 8192, "dedup_bytes_ratio": 0.4897049 "dedup_object_ratio": 34.567315 "chunk_size_average": 64439, "chunk_size_stddev": 33620 } ], "summary": { "examined_objects": 95, "examined_bytes": 214968649 } } The above is an example output when executing ``estimate``. ``target_chunk_size`` is the same as ``chunk_size`` given by the user. ``dedup_bytes_ratio`` shows how many bytes are redundant from examined bytes. For instance, 1 - ``dedup_bytes_ratio`` means the percentage of saved storage space. ``dedup_object_ratio`` is the generated chunk objects / ``examined_objects``. ``chunk_size_average`` means that the divided chunk size on average when performing CDC---this may differnet from ``target_chunk_size`` because CDC genarates different chunk-boundary depending on the content. ``chunk_size_stddev`` represents the standard deviation of the chunk size. 2. Create chunk pool. ^^^^^^^^^^^^^^^^^^^^^ .. code:: bash ceph osd pool create [CHUNK_POOL] 3. Run dedup command (there are two ways). ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - **sample-dedup** .. code:: bash ceph-dedup-tool --op sample-dedup --pool [BASE_POOL] --chunk-pool [CHUNK_POOL] --chunk-size [CHUNK_SIZE] --chunk-algorithm [fastcdc] --fingerprint-algorithm [sha1|sha256|sha512] --chunk-dedup-threshold [THRESHOLD] --max-thread [THREAD_COUNT] --sampling-ratio [SAMPLE_RATIO] --wakeup-period [WAKEUP_PERIOD] --loop --snap The ``sample-dedup`` comamnd spawns threads specified by ``THREAD_COUNT`` to deduplicate objects on the ``BASE_POOL``. According to sampling-ratio---do a full search if ``SAMPLE_RATIO`` is 100, the threads selectively perform deduplication if the chunk is redundant over ``THRESHOLD`` times during iteration. If --loop is set, the theads will wakeup after ``WAKEUP_PERIOD``. If not, the threads will exit after one iteration. Example output: .. code:: bash $ bin/ceph df --- RAW STORAGE --- CLASS SIZE AVAIL USED RAW USED %RAW USED ssd 303 GiB 294 GiB 9.0 GiB 9.0 GiB 2.99 TOTAL 303 GiB 294 GiB 9.0 GiB 9.0 GiB 2.99 --- POOLS --- POOL ID PGS STORED OBJECTS USED %USED MAX AVAIL .mgr 1 1 577 KiB 2 1.7 MiB 0 97 GiB base 2 32 2.0 GiB 517 6.0 GiB 2.02 97 GiB chunk 3 32 0 B 0 0 B 0 97 GiB $ bin/ceph-dedup-tool --op sample-dedup --pool base --chunk-pool chunk --fingerprint-algorithm sha1 --chunk-algorithm fastcdc --loop --sampling-ratio 100 --chunk-dedup-threshold 2 --chunk-size 8192 --max-thread 4 --wakeup-period 60 $ bin/ceph df --- RAW STORAGE --- CLASS SIZE AVAIL USED RAW USED %RAW USED ssd 303 GiB 298 GiB 5.4 GiB 5.4 GiB 1.80 TOTAL 303 GiB 298 GiB 5.4 GiB 5.4 GiB 1.80 --- POOLS --- POOL ID PGS STORED OBJECTS USED %USED MAX AVAIL .mgr 1 1 577 KiB 2 1.7 MiB 0 98 GiB base 2 32 452 MiB 262 1.3 GiB 0.50 98 GiB chunk 3 32 258 MiB 25.91k 938 MiB 0.31 98 GiB - **object dedup** .. code:: bash ceph-dedup-tool --op object-dedup --pool [BASE_POOL] --object [OID] --chunk-pool [CHUNK_POOL] --fingerprint-algorithm [sha1|sha256|sha512] --dedup-cdc-chunk-size [CHUNK_SIZE] The ``object-dedup`` command triggers deduplication on the RADOS object specified by ``OID``. All parameters shown above must be specified. ``CHUNK_SIZE`` should be taken from the results of step 1 above. Note that when this command is executed, ``fastcdc`` will be set by default and other parameters such as ``fingerprint-algorithm`` and ``CHUNK_SIZE`` will be set as defaults for the pool. Deduplicated objects will appear in the chunk pool. If the object is mutated over time, user needs to re-run ``object-dedup`` because chunk-boundary should be recalculated based on updated contents. The user needs to specify ``snap`` if the target object is snapshotted. After deduplication is done, the target object size in ``BASE_POOL`` is zero (evicted) and chunks objects are genereated---these appear in ``CHUNK_POOL``. 4. Read/write I/Os ^^^^^^^^^^^^^^^^^^ After step 3, the users don't need to consider anything about I/Os. Deduplicated objects are completely compatible with existing RADOS operations. 5. Run scrub to fix reference count ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Reference mismatches can on rare occasions occur to false positives when handling reference counts for deduplicated RADOS objects. These mismatches will be fixed by periodically scrubbing the pool: .. code:: bash ceph-dedup-tool --op chunk-scrub --chunk-pool [CHUNK_POOL] --pool [POOL] --max-thread [THREAD_COUNT] The ``chunk-scrub`` command identifies reference mismatches between a metadata object and a chunk object. The ``chunk-pool`` parameter tells where the target chunk objects are located to the ceph-dedup-tool. Example output: A reference mismatch is intentionally created by inserting a reference (dummy-obj) into a chunk object (2ac67f70d3dd187f8f332bb1391f61d4e5c9baae) by using chunk-get-ref. .. code:: bash $ bin/ceph-dedup-tool --op dump-chunk-refs --chunk-pool chunk --object 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae { "type": "by_object", "count": 2, "refs": [ { "oid": "testfile2", "key": "", "snapid": -2, "hash": 2905889452, "max": 0, "pool": 2, "namespace": "" }, { "oid": "dummy-obj", "key": "", "snapid": -2, "hash": 1203585162, "max": 0, "pool": 2, "namespace": "" } ] } $ bin/ceph-dedup-tool --op chunk-scrub --chunk-pool chunk --max-thread 10 10 seconds is set as report period by default join join 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae --done-- 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae ref 10:5102bde2:::dummy-obj:head: referencing pool does not exist --done-- Total object : 1 Examined object : 1 Damaged object : 1 6. Repair a mismatched chunk reference ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If any reference mismatches occur after the ``chunk-scrub``, it is recommended to perform the ``chunk-repair`` operation to fix reference mismatches. The ``chunk-repair`` operation helps in resolving the reference mismatch and restoring consistency. .. code:: bash ceph-dedup-tool --op chunk-repair --chunk-pool [CHUNK_POOL_NAME] --object [CHUNK_OID] --target-ref [TARGET_OID] --target-ref-pool-id [TARGET_POOL_ID] ``chunk-repair`` fixes the ``target-ref``, which is a wrong reference of an ``object``. To fix it correctly, the users must enter the correct ``TARGET_OID`` and ``TARGET_POOL_ID``. .. code:: bash $ bin/ceph-dedup-tool --op chunk-repair --chunk-pool chunk --object 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae --target-ref dummy-obj --target-ref-pool-id 10 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae has 1 references for dummy-obj dummy-obj has 0 references for 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae fix dangling reference from 1 to 0 $ bin/ceph-dedup-tool --op dump-chunk-refs --chunk-pool chunk --object 2ac67f70d3dd187f8f332bb1391f61d4e5c9baae { "type": "by_object", "count": 1, "refs": [ { "oid": "testfile2", "key": "", "snapid": -2, "hash": 2905889452, "max": 0, "pool": 2, "namespace": "" } ] }