githubmirror/bzip2

README
251 строка10 KB
Julian Seward
bzip2-0.1pl2
30 авг 1997, 00:13
30 авг 1997, 00:131eb67a9

GREETINGS!

   This is the README for bzip2, my block-sorting file compressor,
   version 0.1.  

   bzip2 is distributed under the GNU General Public License version 2;
   for details, see the file LICENSE.  Pointers to the algorithms used
   are in ALGORITHMS.  Instructions for use are in bzip2.1.preformatted.

   Please read all of this file carefully.



HOW TO BUILD

   -- for UNIX:

        Type `make'.     (tough, huh? :-)

        This creates binaries "bzip2", and "bunzip2",
        which is a symbolic link to "bzip2".

        It also runs four compress-decompress tests to make sure
        things are working properly.  If all goes well, you should be up &
        running.  Please be sure to read the output from `make'
        just to be sure that the tests went ok.

        To install bzip2 properly:

           -- Copy the binary "bzip2" to a publically visible place,
              possibly /usr/bin, /usr/common/bin or /usr/local/bin.

           -- In that directory, make "bunzip2" be a symbolic link
              to "bzip2".

           -- Copy the manual page, bzip2.1, to the relevant place.
              Probably the right place is /usr/man/man1/.
   
   -- for Windows 95 and NT: 

        For a start, do you *really* want to recompile bzip2?  
        The standard distribution includes a pre-compiled version
        for Windows 95 and NT, `bzip2.exe'.

        This executable was created with Jacob Navia's excellent
        port to Win32 of Chris Fraser & David Hanson's excellent
        ANSI C compiler, "lcc".  You can get to it at the pages
        of the CS department of Princeton University, 
        www.cs.princeton.edu.  
        I have not tried to compile this version of bzip2 with
        a commercial C compiler such as MS Visual C, as I don't
        have one available.

        Note that lcc is designed primarily to be portable and
        fast.  Code quality is a secondary aim, so bzip2.exe
        runs perhaps 40% slower than it could if compiled with
        a good optimising compiler.

        I compiled a previous version of bzip (0.21) with Borland
        C 5.0, which worked fine, and with MS VC++ 2.0, which
        didn't.  Here is an comment from the README for bzip-0.21.

           MS VC++ 2.0's optimising compiler has a bug which, at 
           maximum optimisation, gives an executable which produces 
           garbage compressed files.  Proceed with caution. 
           I do not know whether or not this happens with later 
           versions of VC++.

           Edit the defines starting at line 86 of bzip.c to 
           select your platform/compiler combination, and then compile.
           Then check that the resulting executable (assumed to be 
           called bzip.exe) works correctly, using the SELFTEST.BAT file.  
           Bearing in mind the previous paragraph, the self-test is
           important.

        Note that the defines which bzip-0.21 had, to support 
        compilation with VC 2.0 and BC 5.0, are gone.  Windows
        is not my preferred operating system, and I am, for the
        moment, content with the modestly fast executable created
        by lcc-win32.

   A manual page is supplied, unformatted (bzip2.1),
   preformatted (bzip2.1.preformatted), and preformatted
   and sanitised for MS-DOS (bzip2.txt).

   

COMPILATION NOTES

   bzip2 should work on any 32 or 64-bit machine.  It is known to work
   [meaning: it has compiled and passed self-tests] on the 
   following platform-os combinations:

      Intel i386/i486        running Linux 2.0.21
      Sun Sparcs (various)   running SunOS 4.1.4 and Solaris 2.5
      Intel i386/i486        running Windows 95 and NT
      DEC Alpha              running Digital Unix 4.0

   Following the release of bzip-0.21, many people mailed me
   from around the world to say they had made it work on all sorts
   of weird and wonderful machines.  Chances are, if you have
   a reasonable ANSI C compiler and a 32-bit machine, you can
   get it to work.

   The #defines starting at around line 82 of bzip2.c supply some
   degree of platform-independance.  If you configure bzip2 for some
   new far-out platform which is not covered by the existing definitions,
   please send me the relevant definitions.

   I recommend GNU C for compilation.  The code is standard ANSI C,
   except for the Unix-specific file handling, so any ANSI C compiler
   should work.  Note however that the many routines marked INLINE
   should be inlined by your compiler, else performance will be very
   poor.  Asking your compiler to unroll loops gives some
   small improvement too; for gcc, the relevant flag is
   -funroll-loops.

   On a 386/486 machines, I'd recommend giving gcc the
   -fomit-frame-pointer flag; this liberates another register for
   allocation, which measurably improves performance.

   I used the abovementioned lcc compiler to develop bzip2.
   I would highly recommend this compiler for day-to-day development;
   it is fast, reliable, lightweight, has an excellent profiler,
   and is generally excellent.  And it's fun to retarget, if you're
   into that kind of thing.

   If you compile bzip2 on a new platform or with a new compiler,
   please be sure to run the four compress-decompress tests, either
   using the Makefile, or with the test.bat (MSDOS) or test.cmd (OS/2)
   files.  Some compilers have been seen to introduce subtle bugs
   when optimising, so this check is important.  Ideally you should
   then go on to test bzip2 on a file several megabytes or even
   tens of megabytes long, just to be 110% sure.  ``Professional
   programmers are paranoid programmers.'' (anon).



VALIDATION

   Correct operation, in the sense that a compressed file can always be
   decompressed to reproduce the original, is obviously of paramount
   importance.  To validate bzip2, I used a modified version of 
   Mark Nelson's churn program.  Churn is an automated test driver
   which recursively traverses a directory structure, using bzip2 to
   compress and then decompress each file it encounters, and checking
   that the decompressed data is the same as the original.  As test 
   material, I used several runs over several filesystems of differing
   sizes.

   One set of tests was done on my base Linux filesystem,
   410 megabytes in 23,000 files.  There were several runs over
   this filesystem, in various configurations designed to break bzip2.
   That filesystem also contained some specially constructed test
   files designed to exercise boundary cases in the code.
   This included files of zero length, various long, highly repetitive 
   files, and some files which generate blocks with all values the same.

   The other set of tests was done just with the "normal" configuration,
   but on a much larger quantity of data.

      Tests are:

         Linux FS, 410M, 23000 files

         As above, with --repetitive-fast

         As above, with -1

         Low level disk image of a disk containing
            Windows NT4.0; 420M in a single huge file

         Linux distribution, incl Slackware, 
            all GNU sources.   1900M in 2300 files.

         Approx ~100M compiler sources and related
            programming tools, running under Purify.

         About 500M of data in 120 files of around
            4 M each.  This is raw data from a 
            biomagnetometer (SQUID-based thing).

      Overall, total volume of test data is about
         3300 megabytes in 25000 files.

   The distribution does four tests after building bzip.  These tests
   include test decompressions of pre-supplied compressed files, so
   they not only test that bzip works correctly on the machine it was
   built on, but can also decompress files compressed on a different
   machine.  This guards against unforseen interoperability problems.


Please read and be aware of the following:

WARNING:

   This program (attempts to) compress data by performing several
   non-trivial transformations on it.  Unless you are 100% familiar
   with *all* the algorithms contained herein, and with the
   consequences of modifying them, you should NOT meddle with the
   compression or decompression machinery.  Incorrect changes can and
   very likely *will* lead to disastrous loss of data.


DISCLAIMER:

   I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
   USE OF THIS PROGRAM, HOWSOEVER CAUSED.

   Every compression of a file implies an assumption that the
   compressed file can be decompressed to reproduce the original.
   Great efforts in design, coding and testing have been made to
   ensure that this program works correctly.  However, the complexity
   of the algorithms, and, in particular, the presence of various
   special cases in the code which occur with very low but non-zero
   probability make it impossible to rule out the possibility of bugs
   remaining in the program.  DO NOT COMPRESS ANY DATA WITH THIS
   PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
   SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.

   That is not to say this program is inherently unreliable.  Indeed,
   I very much hope the opposite is true.  bzip2 has been carefully
   constructed and extensively tested.


PATENTS:

   To the best of my knowledge, bzip2 does not use any patented
   algorithms.  However, I do not have the resources available to
   carry out a full patent search.  Therefore I cannot give any
   guarantee of the above statement.

End of legalities.


I hope you find bzip2 useful.  Feel free to contact me at
   jseward@acm.org
if you have any suggestions or queries.  Many people mailed me with
comments, suggestions and patches after the releases of 0.15 and 0.21, 
and the changes in bzip2 are largely a result of this feedback.
I thank you for your comments.

Julian Seward

Manchester, UK
18 July 1996 (version 0.15)
25 August 1996 (version 0.21)

Guildford, Surrey, UK
7 August 1997 (bzip2, version 0.1)
29 August 1997 (bzip2, version 0.1pl2)