/
githubmirror
/
aria2
Обзор
Документация
Войти
/
githubmirror
/
aria2
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
release-1.22.0
src/usage_text.h
1 088 строк
82 KB
Tatsuhiro Tsujikawa
Merge branch 'master' into random-webseeding
26 мар 2016, 11:20
26 мар 2016, 11:20
d640896
Код
Авторство
О чём код?
/* <!-- copyright */ /* * aria2 - The high speed download utility * * Copyright (C) 2006 Tatsuhiro Tsujikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * * In addition, as a special exception, the copyright holders give * permission to link the code of portions of this program with the * OpenSSL library under certain conditions as described in each * individual source file, and distribute linked combinations * including the two. * You must obey the GNU General Public License in all respects * for all of the code used other than OpenSSL. If you modify * file(s) with this exception, you may extend this exception to your * version of the file(s), but you are not obligated to do so. If you * do not wish to do so, delete this exception statement from your * version. If you delete this exception statement from all source * files in the program, then also delete it here. */ /* copyright --> */ // clang-format off #define TEXT_DIR \ _(" -d, --dir=DIR The directory to store the downloaded file.") #define TEXT_OUT \ _(" -o, --out=FILE The file name of the downloaded file. When \n" \ " the -Z option is used, this option will be \n" \ " ignored.") #define TEXT_LOG \ _(" -l, --log=LOG The file name of the log file. If '-' is\n" \ " specified, log is written to stdout.") #define TEXT_DAEMON \ _(" -D, --daemon[=true|false] Run as daemon. The current working directory will\n" \ " be changed to \"/\" and standard input, standard\n" \ " output and standard error will be redirected to\n" \ " \"/dev/null\".") #define TEXT_SPLIT \ _(" -s, --split=N Download a file using N connections. If more\n" \ " than N URIs are given, first N URIs are used and\n" \ " remaining URLs are used for backup. If less than\n" \ " N URIs are given, those URLs are used more than\n" \ " once so that N connections total are made\n" \ " simultaneously. The number of connections to the\n" \ " same host is restricted by the \n" \ " --max-connection-per-server option. See also the\n" \ " --min-split-size option.") #define TEXT_RETRY_WAIT \ _(" --retry-wait=SEC Set the seconds to wait between retries. \n" \ " With SEC > 0, aria2 will retry download when the\n" \ " HTTP server returns 503 response.") #define TEXT_TIMEOUT \ _(" -t, --timeout=SEC Set timeout in seconds.") #define TEXT_MAX_TRIES \ _(" -m, --max-tries=N Set number of tries. 0 means unlimited.") #define TEXT_HTTP_PROXY \ _(" --http-proxy=PROXY Use a proxy server for HTTP. To override a\n"\ " previously defined proxy, use \"\".\n" \ " See also the --all-proxy option.\n" \ " This affects all http downloads.") #define TEXT_HTTPS_PROXY \ _(" --https-proxy=PROXY Use a proxy server for HTTPS. To override a \n" \ " previously defined proxy, use \"\".\n" \ " See also the --all-proxy option.\n" \ " This affects all https downloads.") #define TEXT_FTP_PROXY \ _(" --ftp-proxy=PROXY Use a proxy server for FTP. To override a \n" \ " previously defined proxy, use \"\".\n" \ " See also the --all-proxy option.\n" \ " This affects all ftp downloads.") #define TEXT_ALL_PROXY \ _(" --all-proxy=PROXY Use a proxy server for all protocols. To override\n" \ " a previously defined proxy, use \"\".\n" \ " You also can override this setting and specify a\n" \ " proxy server for a particular protocol using the\n" \ " --http-proxy, --https-proxy and --ftp-proxy\n" \ " options.\n" \ " This affects all downloads.") #define TEXT_HTTP_USER \ _(" --http-user=USER Set HTTP user. This affects all URLs.") #define TEXT_HTTP_PASSWD \ _(" --http-passwd=PASSWD Set HTTP password. This affects all URLs.") #define TEXT_PROXY_METHOD \ _(" --proxy-method=METHOD Set the method to use in proxy request.") #define TEXT_REFERER \ _(" --referer=REFERER Set an http referrrer (Referer). This affects\n" \ " all http/https downloads. If \"*\" is given,\n" \ " the download URI is also used as the referrer.\n" \ " This may be useful when used together with\n" \ " the -P option.") #define TEXT_FTP_USER \ _(" --ftp-user=USER Set FTP user. This affects all URLs.") #define TEXT_FTP_PASSWD \ _(" --ftp-passwd=PASSWD Set FTP password. This affects all URLs.") #define TEXT_FTP_TYPE \ _(" --ftp-type=TYPE Set FTP transfer type.") #define TEXT_FTP_PASV \ _(" -p, --ftp-pasv[=true|false] Use the passive mode in FTP. If false is given,\n" \ " the active mode will be used.") #define TEXT_LOWEST_SPEED_LIMIT \ _(" --lowest-speed-limit=SPEED Close connection if download speed is lower than\n" \ " or equal to this value(bytes per sec).\n" \ " 0 means aria2 does not have a lowest speed limit.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).\n" \ " This option does not affect BitTorrent downloads.") #define TEXT_MAX_OVERALL_DOWNLOAD_LIMIT \ _(" --max-overall-download-limit=SPEED Set max overall download speed in bytes/sec.\n" \ " 0 means unrestricted.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).\n" \ " To limit the download speed per download, use\n" \ " --max-download-limit option.") #define TEXT_MAX_DOWNLOAD_LIMIT \ _(" --max-download-limit=SPEED Set max download speed per each download in\n" \ " bytes/sec. 0 means unrestricted.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).\n" \ " To limit the overall download speed, use\n" \ " --max-overall-download-limit option.") #define TEXT_FILE_ALLOCATION \ _(" --file-allocation=METHOD Specify file allocation method.\n" \ " 'none' doesn't pre-allocate file space. 'prealloc'\n" \ " pre-allocates file space before download begins.\n" \ " This may take some time depending on the size of\n" \ " the file.\n" \ " If you are using newer file systems such as ext4\n" \ " (with extents support), btrfs, xfs or NTFS\n" \ " (MinGW build only), 'falloc' is your best\n" \ " choice. It allocates large(few GiB) files\n" \ " almost instantly. Don't use 'falloc' with legacy\n" \ " file systems such as ext3 and FAT32 because it\n" \ " takes almost same time as 'prealloc' and it\n" \ " blocks aria2 entirely until allocation finishes.\n" \ " 'falloc' may not be available if your system\n" \ " doesn't have posix_fallocate() function.\n" \ " 'trunc' uses ftruncate() system call or\n" \ " platform-specific counterpart to truncate a file\n" \ " to a specified length.") #define TEXT_NO_FILE_ALLOCATION_LIMIT \ _(" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n" \ " size is smaller than SIZE.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).") #define TEXT_ENABLE_DIRECT_IO \ _(" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage while\n" \ " allocating files.\n" \ " Turn off if you encounter any error") #define TEXT_ALLOW_OVERWRITE \ _(" --allow-overwrite[=true|false] Restart download from scratch if the\n" \ " corresponding control file doesn't exist. See\n" \ " also --auto-file-renaming option.") #define TEXT_ALLOW_PIECE_LENGTH_CHANGE \ _(" --allow-piece-length-change[=true|false] If false is given, aria2 aborts\n" \ " download when a piece length is different from\n" \ " one in a control file. If true is given, you can\n" \ " proceed but some download progress will be lost.") #define TEXT_FORCE_SEQUENTIAL \ _(" -Z, --force-sequential[=true|false] Fetch URIs in the command-line sequentially\n" \ " and download each URI in a separate session, like\n" \ " the usual command-line download utilities.") #define TEXT_AUTO_FILE_RENAMING \ _(" --auto-file-renaming[=true|false] Rename file name if the same file already\n" \ " exists. This option works only in http(s)/ftp\n" \ " download.\n" \ " The new file name has a dot and a number(1..9999)\n" \ " appended.") #define TEXT_PARAMETERIZED_URI \ _(" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n" \ " You can specify set of parts:\n" \ " http://{sv1,sv2,sv3}/foo.iso\n" \ " Also you can specify numeric sequences with step\n" \ " counter:\n" \ " http://host/image[000-100:2].img\n" \ " A step counter can be omitted.\n" \ " If all URIs do not point to the same file, such\n" \ " as the second example above, -Z option is\n" \ " required.") #define TEXT_ENABLE_HTTP_KEEP_ALIVE \ _(" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection.") #define TEXT_ENABLE_HTTP_PIPELINING \ _(" --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining.") #define TEXT_CHECK_INTEGRITY \ _(" -V, --check-integrity[=true|false] Check file integrity by validating piece\n" \ " hashes or a hash of entire file. This option has\n" \ " effect only in BitTorrent, Metalink downloads\n" \ " with checksums or HTTP(S)/FTP downloads with\n" \ " --checksum option. If piece hashes are provided,\n" \ " this option can detect damaged portions of a file\n" \ " and re-download them. If a hash of entire file is\n" \ " provided, hash check is only done when file has\n" \ " been already download. This is determined by file\n" \ " length. If hash check fails, file is\n" \ " re-downloaded from scratch. If both piece hashes\n" \ " and a hash of entire file are provided, only\n" \ " piece hashes are used.") #define TEXT_BT_HASH_CHECK_SEED \ _(" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n" \ " --check-integrity option and file is complete,\n" \ " continue to seed file. If you want to check file\n" \ " and download it only when it is damaged or\n" \ " incomplete, set this option to false.\n" \ " This option has effect only on BitTorrent\n" \ " download.") #define TEXT_REALTIME_CHUNK_CHECKSUM \ _(" --realtime-chunk-checksum[=true|false] Validate chunk of data by calculating\n" \ " checksum while downloading a file if chunk\n" \ " checksums are provided.") #define TEXT_CONTINUE \ _(" -c, --continue[=true|false] Continue downloading a partially downloaded\n" \ " file. Use this option to resume a download\n" \ " started by a web browser or another program\n" \ " which downloads files sequentially from the\n" \ " beginning. Currently this option is only\n" \ " applicable to http(s)/ftp downloads.") #define TEXT_USER_AGENT \ _(" -U, --user-agent=USER_AGENT Set user agent for http(s) downloads.") #define TEXT_NO_NETRC \ _(" -n, --no-netrc[=true|false] Disables netrc support.") #define TEXT_NETRC_PATH \ _(" --netrc-path=FILE Specify the path to the netrc file.") #define TEXT_INPUT_FILE \ _(" -i, --input-file=FILE Downloads URIs found in FILE. You can specify\n" \ " multiple URIs for a single entity: separate\n" \ " URIs on a single line using the TAB character.\n" \ " Reads input from stdin when '-' is specified.\n" \ " Additionally, options can be specified after each\n" \ " line of URI. This optional line must start with\n" \ " one or more white spaces and have one option per\n" \ " single line. See INPUT FILE section of man page\n" \ " for details. See also --deferred-input option.") #define TEXT_MAX_CONCURRENT_DOWNLOADS \ _(" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads for\n" \ " every static (HTTP/FTP) URL, torrent and metalink.\n" \ " See also --split and --optimize-concurrent-downloads options.") #define TEXT_OPTIMIZE_CONCURRENT_DOWNLOADS\ _(" --optimize-concurrent-downloads[=true|false|A:B] Optimizes the number of\n" \ " concurrent downloads according to the bandwidth\n" \ " available. aria2 uses the download speed observed\n" \ " in the previous downloads to adapt the number of\n" \ " downloads launched in parallel according to the\n" \ " rule N = A + B Log10(speed in Mbps). The\n" \ " coefficients A and B can be customized in the\n" \ " option arguments with A and B separated by a\n" \ " colon. The default values (A=5,B=25) lead to\n" \ " using typically 5 parallel downloads on 1Mbps\n" \ " networks and above 50 on 100Mbps networks. The\n" \ " number of parallel downloads remains constrained\n" \ " under the maximum defined by the\n" \ " max-concurrent-downloads parameter.") #define TEXT_LOAD_COOKIES \ _(" --load-cookies=FILE Load Cookies from FILE using the Firefox3 format\n" \ " and Mozilla/Firefox(1.x/2.x)/Netscape format.") #define TEXT_SAVE_COOKIES \ _(" --save-cookies=FILE Save Cookies to FILE in Mozilla/Firefox(1.x/2.x)/\n" \ " Netscape format. If FILE already exists, it is\n" \ " overwritten. Session Cookies are also saved and\n" \ " their expiry values are treated as 0.") #define TEXT_SHOW_FILES \ _(" -S, --show-files[=true|false] Print file listing of .torrent, .meta4 and\n" \ " .metalink file and exit. More detailed\n" \ " information will be listed in case of torrent\n" \ " file.") #define TEXT_SELECT_FILE \ _(" --select-file=INDEX... Set file to download by specifying its index.\n" \ " You can find the file index using the\n" \ " --show-files option. Multiple indexes can be\n" \ " specified by using ',', for example: \"3,6\".\n" \ " You can also use '-' to specify a range: \"1-5\".\n" \ " ',' and '-' can be used together.\n" \ " When used with the -M option, index may vary\n" \ " depending on the query(see --metalink-* options).") #define TEXT_TORRENT_FILE \ _(" -T, --torrent-file=TORRENT_FILE The path to the .torrent file.") #define TEXT_FOLLOW_TORRENT \ _(" --follow-torrent=true|false|mem If true or mem is specified, when a file\n" \ " whose suffix is .torrent or content type is\n" \ " application/x-bittorrent is downloaded, aria2\n" \ " parses it as a torrent file and downloads files\n" \ " mentioned in it.\n" \ " If mem is specified, a torrent file is not\n" \ " written to the disk, but is just kept in memory.\n" \ " If false is specified, the .torrent file is\n" \ " downloaded to the disk, but is not parsed as a\n" \ " torrent and its contents are not downloaded.") #define TEXT_LISTEN_PORT \ _(" --listen-port=PORT... Set TCP port number for BitTorrent downloads.\n" \ " Multiple ports can be specified by using ',',\n" \ " for example: \"6881,6885\". You can also use '-'\n" \ " to specify a range: \"6881-6999\". ',' and '-' can\n" \ " be used together.") #define TEXT_MAX_OVERALL_UPLOAD_LIMIT \ _(" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/sec.\n" \ " 0 means unrestricted.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).\n" \ " To limit the upload speed per torrent, use\n" \ " --max-upload-limit option.") #define TEXT_MAX_UPLOAD_LIMIT \ _(" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n" \ " bytes/sec. 0 means unrestricted.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).\n" \ " To limit the overall upload speed, use\n" \ " --max-overall-upload-limit option.") #define TEXT_SEED_TIME \ _(" --seed-time=MINUTES Specify seeding time in minutes. Also see the\n" \ " --seed-ratio option.") #define TEXT_SEED_RATIO \ _(" --seed-ratio=RATIO Specify share ratio. Seed completed torrents\n" \ " until share ratio reaches RATIO.\n" \ " You are strongly encouraged to specify equals or\n" \ " more than 1.0 here. Specify 0.0 if you intend to\n" \ " do seeding regardless of share ratio.\n" \ " If --seed-time option is specified along with\n" \ " this option, seeding ends when at least one of\n" \ " the conditions is satisfied.") #define TEXT_PEER_ID_PREFIX \ _(" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID in\n" \ " BitTorrent is 20 byte length. If more than 20\n" \ " bytes are specified, only first 20 bytes are\n" \ " used. If less than 20 bytes are specified, random\n" \ " byte data are added to make its length 20 bytes.") #define TEXT_ENABLE_PEER_EXCHANGE \ _(" --enable-peer-exchange[=true|false] Enable Peer Exchange extension.") #define TEXT_ENABLE_DHT \ _(" --enable-dht[=true|false] Enable IPv4 DHT functionality. It also enables\n" \ " UDP tracker support. If a private flag is set\n" \ " in a torrent, aria2 doesn't use DHT for that\n" \ " download even if ``true`` is given.") #define TEXT_DHT_LISTEN_PORT \ _(" --dht-listen-port=PORT... Set UDP listening port used by DHT(IPv4, IPv6)\n" \ " and UDP tracker. Multiple ports can be specified\n" \ " by using ',', for example: \"6881,6885\". You can\n" \ " also use '-' to specify a range: \"6881-6999\".\n" \ " ',' and '-' can be used together.") #define TEXT_DHT_ENTRY_POINT \ _(" --dht-entry-point=HOST:PORT Set host and port as an entry point to IPv4 DHT\n" \ " network.") #define TEXT_DHT_FILE_PATH \ _(" --dht-file-path=PATH Change the IPv4 DHT routing table file to PATH.") #define TEXT_BT_MIN_CRYPTO_LEVEL \ _(" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n" \ " If several encryption methods are provided by a\n" \ " peer, aria2 chooses the lowest one which satisfies\n" \ " the given level.") #define TEXT_BT_REQUIRE_CRYPTO \ _(" --bt-require-crypto[=true|false] If true is given, aria2 doesn't accept and\n" \ " establish connection with legacy BitTorrent\n" \ " handshake. Thus aria2 always uses Obfuscation\n" \ " handshake.") #define TEXT_BT_REQUEST_PEER_SPEED_LIMIT \ _(" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n" \ " torrent is lower than SPEED, aria2 temporarily\n" \ " increases the number of peers to try for more\n" \ " download speed. Configuring this option with your\n" \ " preferred download speed can increase your\n" \ " download speed in some cases.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).") #define TEXT_BT_MAX_OPEN_FILES \ _(" --bt-max-open-files=NUM Specify maximum number of files to open in\n" \ " multi-file BitTorrent/Metalink downloads\n" \ " globally.") #define TEXT_BT_SEED_UNVERIFIED \ _(" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n" \ " verifying piece hashes.") #define TEXT_BT_MAX_PEERS \ _(" --bt-max-peers=NUM Specify the maximum number of peers per torrent.\n" \ " 0 means unlimited.\n" \ " See also --bt-request-peer-speed-limit option.") #define TEXT_METALINK_FILE \ _(" -M, --metalink-file=METALINK_FILE The file path to the .meta4 and .metalink\n" \ " file. Reads input from stdin when '-' is\n" \ " specified.") #define TEXT_METALINK_SERVERS \ _(" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n" \ " simultaneously. Some Metalinks regulate the\n" \ " number of servers to connect. aria2 strictly\n" \ " respects them. This means that if Metalink defines\n" \ " the maxconnections attribute lower than\n" \ " NUM_SERVERS, then aria2 uses the value of\n" \ " maxconnections attribute instead of NUM_SERVERS.\n" \ " See also -s and -j options.") #define TEXT_METALINK_VERSION \ _(" --metalink-version=VERSION The version of the file to download.") #define TEXT_METALINK_LANGUAGE \ _(" --metalink-language=LANGUAGE The language of the file to download.") #define TEXT_METALINK_OS \ _(" --metalink-os=OS The operating system of the file to download.") #define TEXT_METALINK_LOCATION \ _(" --metalink-location=LOCATION[,...] The location of the preferred server.\n" \ " A comma-delimited list of locations is\n" \ " acceptable.") #define TEXT_METALINK_PREFERRED_PROTOCOL \ _(" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify 'none'\n" \ " if you don't have any preferred protocol.") #define TEXT_FOLLOW_METALINK \ _(" --follow-metalink=true|false|mem If true or mem is specified, when a file\n" \ " whose suffix is .meta4 or .metalink, or content\n" \ " type of application/metalink4+xml or\n" \ " application/metalink+xml is downloaded, aria2\n" \ " parses it as a metalink file and downloads files\n" \ " mentioned in it.\n" \ " If mem is specified, a metalink file is not\n" \ " written to the disk, but is just kept in memory.\n" \ " If false is specified, the .metalink file is\n" \ " downloaded to the disk, but is not parsed as a\n" \ " metalink file and its contents are not\n" \ " downloaded.") #define TEXT_METALINK_ENABLE_UNIQUE_PROTOCOL \ _(" --metalink-enable-unique-protocol[=true|false] If true is given and several\n" \ " protocols are available for a mirror in a metalink\n" \ " file, aria2 uses one of them.\n" \ " Use --metalink-preferred-protocol option to\n" \ " specify the preference of protocol.") #define TEXT_VERSION \ _(" -v, --version Print the version number and exit.") #define TEXT_HELP \ _(" -h, --help[=TAG|KEYWORD] Print usage and exit.\n" \ " The help messages are classified with tags. A tag\n" \ " starts with \"#\". For example, type \"--help=#http\"\n" \ " to get the usage for the options tagged with\n" \ " \"#http\". If non-tag word is given, print the usage\n" \ " for the options whose name includes that word.") #define TEXT_NO_CONF \ _(" --no-conf[=true|false] Disable loading aria2.conf file.") #define TEXT_CONF_PATH \ _(" --conf-path=PATH Change the configuration file path to PATH.") #define TEXT_STOP \ _(" --stop=SEC Stop application after SEC seconds has passed.\n" \ " If 0 is given, this feature is disabled.") #define TEXT_HEADER \ _(" --header=HEADER Append HEADER to HTTP request header. You can use\n" \ " this option repeatedly to specify more than one\n" \ " header:\n" \ " aria2c --header=\"X-A: b78\" --header=\"X-B: 9J1\"\n" \ " http://host/file") #define TEXT_QUIET \ _(" -q, --quiet[=true|false] Make aria2 quiet(no console output).") #define TEXT_ASYNC_DNS \ _(" --async-dns[=true|false] Enable asynchronous DNS.") #define TEXT_FTP_REUSE_CONNECTION \ _(" --ftp-reuse-connection[=true|false] Reuse connection in FTP.") #define TEXT_SUMMARY_INTERVAL \ _(" --summary-interval=SEC Set interval to output download progress summary.\n" \ " Setting 0 suppresses the output.") #define TEXT_LOG_LEVEL \ _(" --log-level=LEVEL Set log level to output to file specified using\n" \ " --log option.") #define TEXT_REMOTE_TIME \ _(" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from the\n" \ " remote HTTP/FTP server and if it is available,\n" \ " apply it to the local file.") #define TEXT_CONNECT_TIMEOUT \ _(" --connect-timeout=SEC Set the connect timeout in seconds to establish\n" \ " connection to HTTP/FTP/proxy server. After the\n" \ " connection is established, this option makes no\n" \ " effect and --timeout option is used instead.") #define TEXT_MAX_FILE_NOT_FOUND \ _(" --max-file-not-found=NUM If aria2 receives `file not found' status from the\n" \ " remote HTTP/FTP servers NUM times without getting\n" \ " a single byte, then force the download to fail.\n" \ " Specify 0 to disable this option.\n" \ " This options is effective only when using\n" \ " HTTP/FTP servers. The number of retry attempt is\n" \ " counted toward --max-tries, so it should be\n" \ " configured too.") #define TEXT_URI_SELECTOR \ _(" --uri-selector=SELECTOR Specify URI selection algorithm.\n" \ " If 'inorder' is given, URI is tried in the order\n" \ " appeared in the URI list.\n" \ " If 'feedback' is given, aria2 uses download speed\n" \ " observed in the previous downloads and choose\n" \ " fastest server in the URI list. This also\n" \ " effectively skips dead mirrors. The observed\n" \ " download speed is a part of performance profile\n" \ " of servers mentioned in --server-stat-of and\n" \ " --server-stat-if options.\n" \ " If 'adaptive' is given, selects one of the best\n" \ " mirrors for the first and reserved connections.\n" \ " For supplementary ones, it returns mirrors which\n" \ " has not been tested yet, and if each of them has\n" \ " already been tested, returns mirrors which has to\n" \ " be tested again. Otherwise, it doesn't select\n" \ " anymore mirrors. Like 'feedback', it uses a\n" \ " performance profile of servers.") #define TEXT_SERVER_STAT_OF \ _(" --server-stat-of=FILE Specify the filename to which performance profile\n" \ " of the servers is saved. You can load saved data\n" \ " using --server-stat-if option.") #define TEXT_SERVER_STAT_IF \ _(" --server-stat-if=FILE Specify the filename to load performance profile\n" \ " of the servers. The loaded data will be used in\n" \ " some URI selector such as 'feedback'.\n" \ " See also --uri-selector option") #define TEXT_SERVER_STAT_TIMEOUT \ _(" --server-stat-timeout=SEC Specifies timeout in seconds to invalidate\n" \ " performance profile of the servers since the last\n" \ " contact to them.") #define TEXT_AUTO_SAVE_INTERVAL \ _(" --auto-save-interval=SEC Save a control file(*.aria2) every SEC seconds.\n" \ " If 0 is given, a control file is not saved during\n" \ " download. aria2 saves a control file when it stops\n" \ " regardless of the value.") #define TEXT_CERTIFICATE \ _(" --certificate=FILE Use the client certificate in FILE.\n" \ " The certificate must be in PEM format.\n" \ " You may use --private-key option to specify the\n" \ " private key.") #define TEXT_PRIVATE_KEY \ _(" --private-key=FILE Use the private key in FILE.\n" \ " The private key must be decrypted and in PEM\n" \ " format. See also --certificate option.") #define TEXT_CA_CERTIFICATE \ _(" --ca-certificate=FILE Use the certificate authorities in FILE to verify\n" \ " the peers. The certificate file must be in PEM\n" \ " format and can contain multiple CA certificates.\n" \ " Use --check-certificate option to enable\n" \ " verification.") #define TEXT_CHECK_CERTIFICATE \ _(" --check-certificate[=true|false] Verify the peer using certificates specified\n" \ " in --ca-certificate option.") #define TEXT_NO_PROXY \ _(" --no-proxy=DOMAINS Specify comma separated hostnames, domains or\n" \ " network address with or without CIDR block where\n" \ " proxy should not be used.") #define TEXT_USE_HEAD \ _(" --use-head[=true|false] Use HEAD method for the first request to the HTTP\n" \ " server.") #define TEXT_EVENT_POLL \ _(" --event-poll=POLL Specify the method for polling events.") #define TEXT_BT_EXTERNAL_IP \ _(" --bt-external-ip=IPADDRESS Specify the external IP address to report to a\n" \ " BitTorrent tracker. Although this function is\n" \ " named 'external', it can accept any kind of IP\n" \ " addresses.") #define TEXT_HTTP_AUTH_CHALLENGE \ _(" --http-auth-challenge[=true|false] Send HTTP authorization header only when it\n" \ " is requested by the server. If false is set, then\n" \ " authorization header is always sent to the server.\n" \ " There is an exception: if username and password\n" \ " are embedded in URI, authorization header is\n" \ " always sent to the server regardless of this\n" \ " option.") #define TEXT_INDEX_OUT \ _(" -O, --index-out=INDEX=PATH Set file path for file with index=INDEX. You can\n" \ " find the file index using the --show-files option.\n" \ " PATH is a relative path to the path specified in\n" \ " --dir option. You can use this option multiple\n" \ " times.") #define TEXT_DRY_RUN \ _(" --dry-run[=true|false] If true is given, aria2 just checks whether the\n" \ " remote file is available and doesn't download\n" \ " data. This option has effect on HTTP/FTP download.\n" \ " BitTorrent downloads are canceled if true is\n" \ " specified.") #define TEXT_BT_TRACKER_INTERVAL \ _(" --bt-tracker-interval=SEC Set the interval in seconds between tracker\n" \ " requests. This completely overrides interval value\n" \ " and aria2 just uses this value and ignores the\n" \ " min interval and interval value in the response of\n" \ " tracker. If 0 is set, aria2 determines interval\n" \ " based on the response of tracker and the download\n" \ " progress.") #define TEXT_ON_DOWNLOAD_COMPLETE \ _(" --on-download-complete=COMMAND Set the command to be executed after download\n" \ " completed.\n" \ " See --on-download-start option for the\n" \ " requirement of COMMAND.\n" \ " See also --on-download-stop option.") #define TEXT_ON_DOWNLOAD_START \ _(" --on-download-start=COMMAND Set the command to be executed after download\n" \ " got started. aria2 passes 3 arguments to COMMAND:\n" \ " GID, the nubmer of files and file path. See Event\n" \ " Hook in man page for more details.") #define TEXT_ON_DOWNLOAD_PAUSE \ _(" --on-download-pause=COMMAND Set the command to be executed after download\n" \ " was paused.\n"\ " See --on-download-start option for the\n" \ " requirement of COMMAND.") #define TEXT_ON_DOWNLOAD_ERROR \ _(" --on-download-error=COMMAND Set the command to be executed after download\n" \ " aborted due to error.\n" \ " See --on-download-start option for the\n" \ " requirement of COMMAND.\n" \ " See also --on-download-stop option.") #define TEXT_ON_DOWNLOAD_STOP \ _(" --on-download-stop=COMMAND Set the command to be executed after download\n" \ " stopped. You can override the command to be\n" \ " executed for particular download result using\n" \ " --on-download-complete and --on-download-error. If\n" \ " they are specified, command specified in this\n" \ " option is not executed.\n" \ " See --on-download-start option for the\n" \ " requirement of COMMAND.") #define TEXT_BT_STOP_TIMEOUT \ _(" --bt-stop-timeout=SEC Stop BitTorrent download if download speed is 0 in\n" \ " consecutive SEC seconds. If 0 is given, this\n" \ " feature is disabled.") #define TEXT_BT_PRIORITIZE_PIECE \ _(" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and last\n" \ " pieces of each file first. This is useful for\n" \ " previewing files. The argument can contain 2\n" \ " keywords:head and tail. To include both keywords,\n" \ " they must be separated by comma. These keywords\n" \ " can take one parameter, SIZE. For example, if\n" \ " head=SIZE is specified, pieces in the range of\n" \ " first SIZE bytes of each file get higher priority.\n" \ " tail=SIZE means the range of last SIZE bytes of\n" \ " each file. SIZE can include K or M(1K = 1024, 1M =\n" \ " 1024K). If SIZE is omitted, SIZE=1M is used.") #define TEXT_INTERFACE \ _(" --interface=INTERFACE Bind sockets to given interface. You can specify\n" \ " interface name, IP address and hostname.") #define TEXT_MULTIPLE_INTERFACE \ _(" --multiple-interface=INTERFACES Comma separated list of interfaces to bind\n" \ " sockets to. Requests will be splited among the\n" \ " interfaces to achieve link aggregation. You can\n" \ " specify interface name, IP address and hostname.\n" \ " If --interface is used, this option will be\n" \ " ignored.") #define TEXT_DISABLE_IPV6 \ _(" --disable-ipv6[=true|false] Disable IPv6.") #define TEXT_BT_SAVE_METADATA \ _(" --bt-save-metadata[=true|false] Save metadata as .torrent file. This option has\n" \ " effect only when BitTorrent Magnet URI is used.\n" \ " The filename is hex encoded info hash with suffix\n" \ " .torrent. The directory to be saved is the same\n" \ " directory where download file is saved. If the\n" \ " same file already exists, metadata is not saved.\n" \ " See also --bt-metadata-only option.") #define TEXT_HTTP_NO_CACHE \ _(" --http-no-cache[=true|false] Send Cache-Control: no-cache and Pragma: no-cache\n" \ " header to avoid cached content. If false is\n" \ " given, these headers are not sent and you can add\n" \ " Cache-Control header with a directive you like\n" \ " using --header option.") #define TEXT_BT_METADATA_ONLY \ _(" --bt-metadata-only[=true|false] Download metadata only. The file(s) described\n" \ " in metadata will not be downloaded. This option\n" \ " has effect only when BitTorrent Magnet URI is\n" \ " used. See also --bt-save-metadata option.") #define TEXT_HUMAN_READABLE \ _(" --human-readable[=true|false] Print sizes and speed in human readable format\n" \ " (e.g., 1.2Ki, 3.4Mi) in the console readout.") #define TEXT_BT_ENABLE_LPD \ _(" --bt-enable-lpd[=true|false] Enable Local Peer Discovery.") #define TEXT_BT_LPD_INTERFACE \ _(" --bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. If\n" \ " this option is not specified, the default\n" \ " interface is chosen. You can specify interface\n" \ " name and IP address.") #define TEXT_REUSE_URI \ _(" --reuse-uri[=true|false] Reuse already used URIs if no unused URIs are\n" \ " left.") #define TEXT_ALL_PROXY_USER \ _(" --all-proxy-user=USER Set user for --all-proxy.") #define TEXT_ALL_PROXY_PASSWD \ _(" --all-proxy-passwd=PASSWD Set password for --all-proxy.") #define TEXT_HTTP_PROXY_USER \ _(" --http-proxy-user=USER Set user for --http-proxy.") #define TEXT_HTTP_PROXY_PASSWD \ _(" --http-proxy-passwd=PASSWD Set password for --http-proxy.") #define TEXT_HTTPS_PROXY_USER \ _(" --https-proxy-user=USER Set user for --https-proxy.") #define TEXT_HTTPS_PROXY_PASSWD \ _(" --https-proxy-passwd=PASSWD Set password for --https-proxy.") #define TEXT_FTP_PROXY_USER \ _(" --ftp-proxy-user=USER Set user for --ftp-proxy.") #define TEXT_FTP_PROXY_PASSWD \ _(" --ftp-proxy-passwd=PASSWD Set password for --ftp-proxy.") #define TEXT_REMOVE_CONTROL_FILE \ _(" --remove-control-file[=true|false] Remove control file before download. Using\n" \ " with --allow-overwrite=true, download always\n" \ " starts from scratch. This will be useful for\n" \ " users behind proxy server which disables resume.") #define TEXT_ALWAYS_RESUME \ _(" --always-resume[=true|false] Always resume download. If true is given, aria2\n" \ " always tries to resume download and if resume is\n" \ " not possible, aborts download. If false is given,\n" \ " when all given URIs do not support resume or\n" \ " aria2 encounters N URIs which does not support\n" \ " resume (N is the value specified using\n" \ " --max-resume-failure-tries option), aria2\n" \ " downloads file from scratch.\n" \ " See --max-resume-failure-tries option.") #define TEXT_MAX_RESUME_FAILURE_TRIES \ _(" --max-resume-failure-tries=N When used with --always-resume=false, aria2\n" \ " downloads file from scratch when aria2 detects N\n" \ " number of URIs that does not support resume. If N\n" \ " is 0, aria2 downloads file from scratch when all\n" \ " given URIs do not support resume.\n" \ " See --always-resume option.") #define TEXT_BT_TRACKER_TIMEOUT \ _(" --bt-tracker-timeout=SEC Set timeout in seconds.") #define TEXT_BT_TRACKER_CONNECT_TIMEOUT \ _(" --bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to\n" \ " establish connection to tracker. After the\n" \ " connection is established, this option makes no\n" \ " effect and --bt-tracker-timeout option is used\n" \ " instead.") #define TEXT_DHT_MESSAGE_TIMEOUT \ _(" --dht-message-timeout=SEC Set timeout in seconds.") #define TEXT_HTTP_ACCEPT_GZIP \ _(" --http-accept-gzip[=true|false] Send 'Accept: deflate, gzip' request header\n" \ " and inflate response if remote server responds\n" \ " with 'Content-Encoding: gzip' or\n" \ " 'Content-Encoding: deflate'.") #define TEXT_SAVE_SESSION \ _(" --save-session=FILE Save error/unfinished downloads to FILE on exit.\n" \ " You can pass this output file to aria2c with -i\n" \ " option on restart. Please note that downloads\n" \ " added by aria2.addTorrent and aria2.addMetalink\n" \ " RPC method and whose metadata could not be saved\n" \ " as a file will not be saved. Downloads removed\n" \ " using aria2.remove and aria2.forceRemove will not\n" \ " be saved.") #define TEXT_MAX_CONNECTION_PER_SERVER \ _(" -x, --max-connection-per-server=NUM The maximum number of connections to one\n" \ " server for each download.") #define TEXT_MIN_SPLIT_SIZE \ _(" -k, --min-split-size=SIZE aria2 does not split less than 2*SIZE byte range.\n" \ " For example, let's consider downloading 20MiB\n" \ " file. If SIZE is 10M, aria2 can split file into 2\n" \ " range [0-10MiB) and [10MiB-20MiB) and download it\n" \ " using 2 sources(if --split >= 2, of course).\n" \ " If SIZE is 15M, since 2*15M > 20MiB, aria2 does\n" \ " not split file and download it using 1 source.\n" \ " You can append K or M(1K = 1024, 1M = 1024K).") #define TEXT_CONDITIONAL_GET \ _(" --conditional-get[=true|false] Download file only when the local file is older\n" \ " than remote file. Currently, this function has\n" \ " many limitations. See man page for details.") #define TEXT_ON_BT_DOWNLOAD_COMPLETE \ _(" --on-bt-download-complete=COMMAND For BitTorrent, a command specified in\n" \ " --on-download-complete is called after download\n" \ " completed and seeding is over. On the other hand,\n" \ " this option sets the command to be executed after\n" \ " download completed but before seeding.\n" \ " See --on-download-start option for the\n" \ " requirement of COMMAND.") #define TEXT_ENABLE_ASYNC_DNS6 \ _(" --enable-async-dns6[=true|false] Enable IPv6 name resolution in asynchronous\n" \ " DNS resolver. This option will be ignored when\n" \ " --async-dns=false.") #define TEXT_ENABLE_DHT6 \ _(" --enable-dht6[=true|false] Enable IPv6 DHT functionality.\n" \ " Use --dht-listen-port option to specify port\n" \ " number to listen on. See also --dht-listen-addr6\n" \ " option.") #define TEXT_DHT_LISTEN_ADDR6 \ _(" --dht-listen-addr6=ADDR Specify address to bind socket for IPv6 DHT. \n" \ " It should be a global unicast IPv6 address of the\n" \ " host.") #define TEXT_DHT_ENTRY_POINT6 \ _(" --dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 DHT\n" \ " network.") #define TEXT_DHT_FILE_PATH6 \ _(" --dht-file-path6=PATH Change the IPv6 DHT routing table file to PATH.") #define TEXT_BT_TRACKER \ _(" --bt-tracker=URI[,...] Comma separated list of additional BitTorrent\n" \ " tracker's announce URI. These URIs are not\n" \ " affected by --bt-exclude-tracker option because\n" \ " they are added after URIs in --bt-exclude-tracker\n" \ " option are removed.") #define TEXT_BT_EXCLUDE_TRACKER \ _(" --bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent tracker's\n" \ " announce URI to remove. You can use special value\n" \ " '*' which matches all URIs, thus removes all\n" \ " announce URIs. When specifying '*' in shell\n" \ " command-line, don't forget to escape or quote it.\n" \ " See also --bt-tracker option.") #define TEXT_MAX_DOWNLOAD_RESULT \ _(" --max-download-result=NUM Set maximum number of download result kept in\n" \ " memory. The download results are completed/error/\n" \ " removed downloads. The download results are stored\n" \ " in FIFO queue and it can store at most NUM\n" \ " download results. When queue is full and new\n" \ " download result is created, oldest download result\n" \ " is removed from the front of the queue and new one\n" \ " is pushed to the back. Setting big number in this\n" \ " option may result high memory consumption after\n" \ " thousands of downloads. Specifying 0 means no\n" \ " download result is kept.") #define TEXT_ASYNC_DNS_SERVER \ _(" --async-dns-server=IPADDRESS[,...] Comma separated list of DNS server address\n" \ " used in asynchronous DNS resolver. Usually\n" \ " asynchronous DNS resolver reads DNS server\n" \ " addresses from /etc/resolv.conf. When this option\n" \ " is used, it uses DNS servers specified in this\n" \ " option instead of ones in /etc/resolv.conf. You\n" \ " can specify both IPv4 and IPv6 address. This\n" \ " option is useful when the system does not have\n" \ " /etc/resolv.conf and user does not have the\n" \ " permission to create it.") #define TEXT_ENABLE_RPC \ _(" --enable-rpc[=true|false] Enable JSON-RPC/XML-RPC server.\n" \ " It is strongly recommended to set secret\n" \ " authorization token using --rpc-secret option.\n" \ " See also --rpc-listen-port option.") #define TEXT_RPC_MAX_REQUEST_SIZE \ _(" --rpc-max-request-size=SIZE Set max size of JSON-RPC/XML-RPC request. If aria2\n" \ " detects the request is more than SIZE bytes, it\n" \ " drops connection.") #define TEXT_RPC_USER \ _(" --rpc-user=USER Set JSON-RPC/XML-RPC user. This option will be\n" \ " deprecated in the future release. Migrate to\n" \ " --rpc-secret option as soon as possible.") #define TEXT_RPC_PASSWD \ _(" --rpc-passwd=PASSWD Set JSON-RPC/XML-RPC password. This option will\n" \ " be deprecated in the future release. Migrate to\n" \ " --rpc-secret option as soon as possible.") #define TEXT_RPC_LISTEN_ALL \ _(" --rpc-listen-all[=true|false] Listen incoming JSON-RPC/XML-RPC requests on all\n" \ " network interfaces. If false is given, listen only\n" \ " on local loopback interface.") #define TEXT_RPC_LISTEN_PORT \ _(" --rpc-listen-port=PORT Specify a port number for JSON-RPC/XML-RPC server\n" \ " to listen to.") #define TEXT_SHOW_CONSOLE_READOUT \ _(" --show-console-readout[=true|false] Show console readout.") #define TEXT_METALINK_BASE_URI \ _(" --metalink-base-uri=URI Specify base URI to resolve relative URI in\n" \ " metalink:url and metalink:metaurl element in a\n" \ " metalink file stored in local disk. If URI points\n" \ " to a directory, URI must end with '/'.") #define TEXT_STREAM_PIECE_SELECTOR \ _(" --stream-piece-selector=SELECTOR Specify piece selection algorithm\n" \ " used in HTTP/FTP download. Piece means fixed\n" \ " length segment which is downloaded in parallel\n" \ " in segmented download. If 'default' is given,\n" \ " aria2 selects piece so that it reduces the\n" \ " number of establishing connection. This is\n" \ " reasonable default behaviour because\n" \ " establishing connection is an expensive\n" \ " operation.\n" \ " If 'inorder' is given, aria2 selects piece which\n" \ " has minimum index. Index=0 means first of the\n" \ " file. This will be useful to view movie while\n" \ " downloading it. --enable-http-pipelining option\n" \ " may be useful to reduce reconnection overhead.\n" \ " Please note that aria2 honors\n" \ " --min-split-size option, so it will be necessary\n" \ " to specify a reasonable value to\n" \ " --min-split-size option.\n" \ " If 'random' is given, aria2 selects piece\n" \ " randomly. Like 'inorder', --min-split-size\n" \ " option is honored.\n" \ " If 'geom' is given, at the beginning aria2\n" \ " selects piece which has minimum index like\n" \ " 'inorder', but it exponentially increasingly\n" \ " keeps space from previously selected piece. This\n" \ " will reduce the number of establishing connection\n" \ " and at the same time it will download the\n" \ " beginning part of the file first. This will be\n" \ " useful to view movie while downloading it.") #define TEXT_TRUNCATE_CONSOLE_READOUT \ _(" --truncate-console-readout[=true|false] Truncate console readout to fit in\n"\ " a single line.") #define TEXT_PAUSE \ _(" --pause[=true|false] Pause download after added. This option is\n" \ " effective only when --enable-rpc=true is given.") #define TEXT_RPC_ALLOW_ORIGIN_ALL \ _(" --rpc-allow-origin-all[=true|false] Add Access-Control-Allow-Origin header\n" \ " field with value '*' to the RPC response.") #define TEXT_DOWNLOAD_RESULT \ _(" --download-result=OPT This option changes the way \"Download Results\"\n" \ " is formatted. If OPT is 'default', print GID,\n" \ " status, average download speed and path/URI. If\n" \ " multiple files are involved, path/URI of first\n" \ " requested file is printed and remaining ones are\n" \ " omitted.\n" \ " If OPT is 'full', print GID, status, average\n" \ " download speed, percentage of progress and\n" \ " path/URI. The percentage of progress and\n" \ " path/URI are printed for each requested file in\n" \ " each row.") #define TEXT_HASH_CHECK_ONLY \ _(" --hash-check-only[=true|false] If true is given, after hash check using\n" \ " --check-integrity option, abort download whether\n" \ " or not download is complete.") #define TEXT_CHECKSUM \ _(" --checksum=TYPE=DIGEST Set checksum. TYPE is hash type. The supported\n" \ " hash type is listed in \"Hash Algorithms\" in\n" \ " \"aria2c -v\". DIGEST is hex digest.\n" \ " For example, setting sha-1 digest looks like\n" \ " this:\n" \ " sha-1=0192ba11326fe2298c8cb4de616f4d4140213838\n" \ " This option applies only to HTTP(S)/FTP\n" \ " downloads.") #define TEXT_PIECE_LENGTH \ _(" --piece-length=LENGTH Set a piece length for HTTP/FTP downloads. This\n" \ " is the boundary when aria2 splits a file. All\n" \ " splits occur at multiple of this length. This\n" \ " option will be ignored in BitTorrent downloads.\n" \ " It will be also ignored if Metalink file\n" \ " contains piece hashes.") #define TEXT_STOP_WITH_PROCESS \ _(" --stop-with-process=PID Stop application when process PID is not running.\n" \ " This is useful if aria2 process is forked from a\n" \ " parent process. The parent process can fork aria2\n" \ " with its own pid and when parent process exits\n" \ " for some reason, aria2 can detect it and shutdown\n" \ " itself.") #define TEXT_DEFERRED_INPUT \ _(" --deferred-input[=true|false] If true is given, aria2 does not read all URIs\n" \ " and options from file specified by -i option at\n" \ " startup, but it reads one by one when it needs\n" \ " later. This may reduce memory usage if input\n" \ " file contains a lot of URIs to download.\n" \ " If false is given, aria2 reads all URIs and\n" \ " options at startup.") #define TEXT_BT_REMOVE_UNSELECTED_FILE \ _(" --bt-remove-unselected-file[=true|false] Removes the unselected files when\n" \ " download is completed in BitTorrent. To\n" \ " select files, use --select-file option. If\n" \ " it is not used, all files are assumed to be\n" \ " selected. Please use this option with care\n" \ " because it will actually remove files from\n" \ " your disk.") #define TEXT_ENABLE_MMAP \ _(" --enable-mmap[=true|false] Map files into memory.") #define TEXT_RPC_CERTIFICATE \ _(" --rpc-certificate=FILE Use the certificate in FILE for RPC server.\n" \ " The certificate must be in PEM format.\n" \ " Use --rpc-private-key option to specify the\n" \ " private key. Use --rpc-secure option to enable\n" \ " encryption.") #define TEXT_RPC_PRIVATE_KEY \ _(" --rpc-private-key=FILE Use the private key in FILE for RPC server.\n" \ " The private key must be decrypted and in PEM\n" \ " format. Use --rpc-secure option to enable\n" \ " encryption. See also --rpc-certificate option.") #define TEXT_RPC_SECURE \ _(" --rpc-secure[=true|false] RPC transport will be encrypted by SSL/TLS.\n" \ " The RPC clients must use https scheme to access\n" \ " the server. For WebSocket client, use wss\n" \ " scheme. Use --rpc-certificate and\n" \ " --rpc-private-key options to specify the\n" \ " server certificate and private key.") #define TEXT_RPC_SAVE_UPLOAD_METADATA \ _(" --rpc-save-upload-metadata[=true|false] Save the uploaded torrent or\n" \ " metalink metadata in the directory specified\n" \ " by --dir option. The filename consists of\n" \ " SHA-1 hash hex string of metadata plus\n" \ " extension. For torrent, the extension is\n" \ " '.torrent'. For metalink, it is '.meta4'.\n" \ " If false is given to this option, the\n" \ " downloads added by aria2.addTorrent or\n" \ " aria2.addMetalink will not be saved by\n" \ " --save-session option.") #define TEXT_FORCE_SAVE \ _(" --force-save[=true|false] Save download with --save-session option even\n" \ " if the download is completed or removed. This\n" \ " option also saves control file in that\n" \ " situations. This may be useful to save\n" \ " BitTorrent seeding which is recognized as\n" \ " completed state.") #define TEXT_DISK_CACHE \ _(" --disk-cache=SIZE Enable disk cache. If SIZE is 0, the disk cache\n" \ " is disabled. This feature caches the downloaded\n" \ " data in memory, which grows to at most SIZE\n" \ " bytes. The cache storage is created for aria2\n" \ " instance and shared by all downloads. The one\n" \ " advantage of the disk cache is reduce the disk\n" \ " I/O because the data are written in larger unit\n" \ " and it is reordered by the offset of the file.\n" \ " If hash checking is involved and the data are\n" \ " cached in memory, we don't need to read them\n" \ " from the disk.\n" \ " SIZE can include K or M(1K = 1024, 1M = 1024K).") #define TEXT_GID \ _(" --gid=GID Set GID manually. aria2 identifies each\n" \ " download by the ID called GID. The GID must be\n" \ " hex string of 16 characters, thus [0-9a-zA-Z]\n" \ " are allowed and leading zeros must not be\n" \ " stripped. The GID all 0 is reserved and must\n" \ " not be used. The GID must be unique, otherwise\n" \ " error is reported and the download is not added.\n" \ " This option is useful when restoring the\n" \ " sessions saved using --save-session option. If\n" \ " this option is not used, new GID is generated\n" \ " by aria2.") #define TEXT_CONSOLE_LOG_LEVEL \ _(" --console-log-level=LEVEL Set log level to output to console.") #define TEXT_SAVE_SESSION_INTERVAL \ _(" --save-session-interval=SEC Save error/unfinished downloads to a file\n" \ " specified by --save-session option every SEC\n" \ " seconds. If 0 is given, file will be saved only\n" \ " when aria2 exits.") #define TEXT_ENABLE_COLOR \ _(" --enable-color[=true|false] Enable color output for a terminal.") #define TEXT_RPC_SECRET \ _(" --rpc-secret=TOKEN Set RPC secret authorization token.") #define TEXT_DSCP \ _(" --dscp=DSCP Set DSCP value in outgoing IP packets of\n" \ " BitTorrent traffic for QoS. This parameter sets\n" \ " only DSCP bits in TOS field of IP packets,\n" \ " not the whole field. If you take values\n" \ " from /usr/include/netinet/ip.h divide them by 4\n" \ " (otherwise values would be incorrect, e.g. your\n" \ " CS1 class would turn into CS4). If you take\n" \ " commonly used values from RFC, network vendors'\n" \ " documentation, Wikipedia or any other source,\n" \ " use them as they are.") #define TEXT_RLIMIT_NOFILE \ _(" --rlimit-nofile=NUM Set the soft limit of open file descriptors.\n" \ " This open will only have effect when:\n" \ " a) The system supports it (posix)\n" \ " b) The limit does not exceed the hard limit.\n" \ " c) The specified limit is larger than the\n" \ " current soft limit.\n" \ " This is equivalent to setting nofile via ulimit,\n" \ " except that it will never decrease the limit.") #define TEXT_PAUSE_METADATA \ _(" --pause-metadata[=true|false]\n" \ " Pause downloads created as a result of metadata\n" \ " download. There are 3 types of metadata\n" \ " downloads in aria2: (1) downloading .torrent\n" \ " file. (2) downloading torrent metadata using\n" \ " magnet link. (3) downloading metalink file.\n" \ " These metadata downloads will generate downloads\n" \ " using their metadata. This option pauses these\n" \ " subsequent downloads. This option is effective\n" \ " only when --enable-rpc=true is given.") #define TEXT_BT_DETACH_SEED_ONLY \ _(" --bt-detach-seed-only[=true|false]\n" \ " Exclude seed only downloads when counting\n" \ " concurrent active downloads (See -j option).\n" \ " This means that if -j3 is given and this option\n" \ " is turned on and 3 downloads are active and one\n" \ " of those enters seed mode, then it is excluded\n" \ " from active download count (thus it becomes 2),\n" \ " and the next download waiting in queue gets\n" \ " started. But be aware that seeding item is still\n" \ " recognized as active download in RPC method.") #define TEXT_MIN_TLS_VERSION \ _(" --min-tls-version=VERSION Specify minimum SSL/TLS version to enable.") #define TEXT_BT_FORCE_ENCRYPTION \ _(" --bt-force-encryption[=true|false]\n" \ " Requires BitTorrent message payload encryption\n" \ " with arc4. This is a shorthand of\n" \ " --bt-require-crypto --bt-min-crypto-level=arc4.\n" \ " If true is given, deny legacy BitTorrent\n" \ " handshake and only use Obfuscation handshake and\n" \ " always encrypt message payload.") #define TEXT_SSH_HOST_KEY_MD \ _(" --ssh-host-key-md=TYPE=DIGEST\n" \ " Set checksum for SSH host public key. TYPE is\n" \ " hash type. The supported hash type is sha-1 or\n" \ " md5. DIGEST is hex digest. For example:\n" \ " sha-1=b030503d4de4539dc7885e6f0f5e256704edf4c3\n" \ " This option can be used to validate server's\n" \ " public key when SFTP is used. If this option is\n" \ " not set, which is default, no validation takes\n" \ " place.") #define TEXT_SOCKET_RECV_BUFFER_SIZE \ _(" --socket-recv-buffer-size=SIZE\n" \ " Set the maximum socket receive buffer in bytes.\n" \ " Specifing 0 will disable this option. This value\n" \ " will be set to socket file descriptor using\n" \ " SO_RCVBUF socket option with setsockopt() call.") #define TEXT_BT_ENABLE_HOOK_AFTER_HASH_CHECK \ _(" --bt-enable-hook-after-hash-check[=true|false] Allow hook command invocation\n" \ " after hash check (see -V option) in BitTorrent\n" \ " download. By default, when hash check succeeds,\n" \ " the command given by --on-bt-download-complete\n" \ " is executed. To disable this action, give false\n" \ " to this option.") #define TEXT_MAX_MMAP_LIMIT \ _(" --max-mmap-limit=SIZE Set the maximum file size to enable mmap (see\n" \ " --enable-mmap option). The file size is\n" \ " determined by the sum of all files contained in\n" \ " one download. For example, if a download\n" \ " contains 5 files, then file size is the total\n" \ " size of those files. If file size is strictly\n" \ " greater than the size specified in this option,\n" \ " mmap will be disabled.") // clang-format on