cvm
/
Doxyfile
2658 строк · 113.7 Кб
1# Doxyfile 1.9.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project.
5#
6# All text after a double hash (##) is considered a comment and is placed in
7# front of the TAG it is preceding.
8#
9# All text after a single hash (#) is considered a comment and will be ignored.
10# The format is:
11# TAG = value [value, ...]
12# For lists, items can also be appended using:
13# TAG += value [value, ...]
14# Values that contain spaces should be placed between quotes (\" \").
15
16#---------------------------------------------------------------------------
17# Project related configuration options
18#---------------------------------------------------------------------------
19
20# This tag specifies the encoding used for all characters in the configuration
21# file that follow. The default is UTF-8 which is also the encoding used for all
22# text before the first occurrence of this tag. Doxygen uses libiconv (or the
23# iconv built into libc) for the transcoding. See
24# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
25# The default value is: UTF-8.
26
27DOXYFILE_ENCODING = UTF-8
28
29# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
30# double-quotes, unless you are using Doxywizard) that should identify the
31# project for which the documentation is generated. This name is used in the
32# title of most generated pages and in a few other places.
33# The default value is: My Project.
34
35PROJECT_NAME = "C"
36
37# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
38# could be handy for archiving the generated documentation or if some version
39# control system is used.
40
41PROJECT_NUMBER =
42
43# Using the PROJECT_BRIEF tag one can provide an optional one line description
44# for a project that appears at the top of each page and should give viewer a
45# quick idea about the purpose of the project. Keep the description short.
46
47PROJECT_BRIEF =
48
49# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
50# in the documentation. The maximum height of the logo should not exceed 55
51# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
52# the logo to the output directory.
53
54PROJECT_LOGO =
55
56# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
57# into which the generated documentation will be written. If a relative path is
58# entered, it will be relative to the location where doxygen was started. If
59# left blank the current directory will be used.
60
61OUTPUT_DIRECTORY = doxygen
62
63# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
64# directories (in 2 levels) under the output directory of each output format and
65# will distribute the generated files over these directories. Enabling this
66# option can be useful when feeding doxygen a huge amount of source files, where
67# putting all generated files in the same directory would otherwise causes
68# performance problems for the file system.
69# The default value is: NO.
70
71CREATE_SUBDIRS = NO
72
73# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
74# characters to appear in the names of generated files. If set to NO, non-ASCII
75# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
76# U+3044.
77# The default value is: NO.
78
79ALLOW_UNICODE_NAMES = NO
80
81# The OUTPUT_LANGUAGE tag is used to specify the language in which all
82# documentation generated by doxygen is written. Doxygen will use this
83# information to generate all constant output in the proper language.
84# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
85# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
86# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
87# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
88# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
89# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
90# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
91# Ukrainian and Vietnamese.
92# The default value is: English.
93
94OUTPUT_LANGUAGE = English
95
96# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
97# documentation generated by doxygen is written. Doxygen will use this
98# information to generate all generated output in the proper direction.
99# Possible values are: None, LTR, RTL and Context.
100# The default value is: None.
101
102OUTPUT_TEXT_DIRECTION = None
103
104# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
105# descriptions after the members that are listed in the file and class
106# documentation (similar to Javadoc). Set to NO to disable this.
107# The default value is: YES.
108
109BRIEF_MEMBER_DESC = YES
110
111# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
112# description of a member or function before the detailed description
113#
114# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
115# brief descriptions will be completely suppressed.
116# The default value is: YES.
117
118REPEAT_BRIEF = YES
119
120# This tag implements a quasi-intelligent brief description abbreviator that is
121# used to form the text in various listings. Each string in this list, if found
122# as the leading text of the brief description, will be stripped from the text
123# and the result, after processing the whole list, is used as the annotated
124# text. Otherwise, the brief description is used as-is. If left blank, the
125# following values are used ($name is automatically replaced with the name of
126# the entity):The $name class, The $name widget, The $name file, is, provides,
127# specifies, contains, represents, a, an and the.
128
129ABBREVIATE_BRIEF = "The $name class" \
130"The $name widget" \
131"The $name file" \
132is \
133provides \
134specifies \
135contains \
136represents \
137a \
138an \
139the
140
141# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
142# doxygen will generate a detailed section even if there is only a brief
143# description.
144# The default value is: NO.
145
146ALWAYS_DETAILED_SEC = NO
147
148# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
149# inherited members of a class in the documentation of that class as if those
150# members were ordinary class members. Constructors, destructors and assignment
151# operators of the base classes will not be shown.
152# The default value is: NO.
153
154INLINE_INHERITED_MEMB = NO
155
156# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
157# before files name in the file list and in the header files. If set to NO the
158# shortest path that makes the file name unique will be used
159# The default value is: YES.
160
161FULL_PATH_NAMES = YES
162
163# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
164# Stripping is only done if one of the specified strings matches the left-hand
165# part of the path. The tag can be used to show relative paths in the file list.
166# If left blank the directory from which doxygen is run is used as the path to
167# strip.
168#
169# Note that you can specify absolute paths here, but also relative paths, which
170# will be relative from the directory where doxygen is started.
171# This tag requires that the tag FULL_PATH_NAMES is set to YES.
172
173STRIP_FROM_PATH =
174
175# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
176# path mentioned in the documentation of a class, which tells the reader which
177# header file to include in order to use a class. If left blank only the name of
178# the header file containing the class definition is used. Otherwise one should
179# specify the list of include paths that are normally passed to the compiler
180# using the -I flag.
181
182STRIP_FROM_INC_PATH =
183
184# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
185# less readable) file names. This can be useful is your file systems doesn't
186# support long names like on DOS, Mac, or CD-ROM.
187# The default value is: NO.
188
189SHORT_NAMES = NO
190
191# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
192# first line (until the first dot) of a Javadoc-style comment as the brief
193# description. If set to NO, the Javadoc-style will behave just like regular Qt-
194# style comments (thus requiring an explicit @brief command for a brief
195# description.)
196# The default value is: NO.
197
198JAVADOC_AUTOBRIEF = NO
199
200# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
201# such as
202# /***************
203# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
204# Javadoc-style will behave just like regular comments and it will not be
205# interpreted by doxygen.
206# The default value is: NO.
207
208JAVADOC_BANNER = NO
209
210# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
211# line (until the first dot) of a Qt-style comment as the brief description. If
212# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
213# requiring an explicit \brief command for a brief description.)
214# The default value is: NO.
215
216QT_AUTOBRIEF = NO
217
218# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
219# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
220# a brief description. This used to be the default behavior. The new default is
221# to treat a multi-line C++ comment block as a detailed description. Set this
222# tag to YES if you prefer the old behavior instead.
223#
224# Note that setting this tag to YES also means that rational rose comments are
225# not recognized any more.
226# The default value is: NO.
227
228MULTILINE_CPP_IS_BRIEF = NO
229
230# By default Python docstrings are displayed as preformatted text and doxygen's
231# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
232# doxygen's special commands can be used and the contents of the docstring
233# documentation blocks is shown as doxygen documentation.
234# The default value is: YES.
235
236PYTHON_DOCSTRING = YES
237
238# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
239# documentation from any documented member that it re-implements.
240# The default value is: YES.
241
242INHERIT_DOCS = YES
243
244# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
245# page for each member. If set to NO, the documentation of a member will be part
246# of the file/class/namespace that contains it.
247# The default value is: NO.
248
249SEPARATE_MEMBER_PAGES = NO
250
251# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
252# uses this value to replace tabs by spaces in code fragments.
253# Minimum value: 1, maximum value: 16, default value: 4.
254
255TAB_SIZE = 4
256
257# This tag can be used to specify a number of aliases that act as commands in
258# the documentation. An alias has the form:
259# name=value
260# For example adding
261# "sideeffect=@par Side Effects:\n"
262# will allow you to put the command \sideeffect (or @sideeffect) in the
263# documentation, which will result in a user-defined paragraph with heading
264# "Side Effects:". You can put \n's in the value part of an alias to insert
265# newlines (in the resulting output). You can put ^^ in the value part of an
266# alias to insert a newline as if a physical newline was in the original file.
267# When you need a literal { or } or , in the value part of an alias you have to
268# escape them by means of a backslash (\), this can lead to conflicts with the
269# commands \{ and \} for these it is advised to use the version @{ and @} or use
270# a double escape (\\{ and \\})
271
272ALIASES =
273
274# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
275# only. Doxygen will then generate output that is more tailored for C. For
276# instance, some of the names that are used will be different. The list of all
277# members will be omitted, etc.
278# The default value is: NO.
279
280OPTIMIZE_OUTPUT_FOR_C = NO
281
282# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
283# Python sources only. Doxygen will then generate output that is more tailored
284# for that language. For instance, namespaces will be presented as packages,
285# qualified scopes will look different, etc.
286# The default value is: NO.
287
288OPTIMIZE_OUTPUT_JAVA = NO
289
290# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
291# sources. Doxygen will then generate output that is tailored for Fortran.
292# The default value is: NO.
293
294OPTIMIZE_FOR_FORTRAN = NO
295
296# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
297# sources. Doxygen will then generate output that is tailored for VHDL.
298# The default value is: NO.
299
300OPTIMIZE_OUTPUT_VHDL = NO
301
302# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice
303# sources only. Doxygen will then generate output that is more tailored for that
304# language. For instance, namespaces will be presented as modules, types will be
305# separated into more groups, etc.
306# The default value is: NO.
307
308OPTIMIZE_OUTPUT_SLICE = NO
309
310# Doxygen selects the parser to use depending on the extension of the files it
311# parses. With this tag you can assign which parser to use for a given
312# extension. Doxygen has a built-in mapping, but you can override or extend it
313# using this tag. The format is ext=language, where ext is a file extension, and
314# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
315# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
316# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
317# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
318# tries to guess whether the code is fixed or free formatted code, this is the
319# default for Fortran type files). For instance to make doxygen treat .inc files
320# as Fortran files (default is PHP), and .f files as C (default is Fortran),
321# use: inc=Fortran f=C.
322#
323# Note: For files without extension you can use no_extension as a placeholder.
324#
325# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
326# the files are not read by doxygen. When specifying no_extension you should add
327# * to the FILE_PATTERNS.
328#
329# Note see also the list of default file extension mappings.
330
331EXTENSION_MAPPING =
332
333# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
334# according to the Markdown format, which allows for more readable
335# documentation. See https://daringfireball.net/projects/markdown/ for details.
336# The output of markdown processing is further processed by doxygen, so you can
337# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
338# case of backward compatibilities issues.
339# The default value is: YES.
340
341MARKDOWN_SUPPORT = YES
342
343# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
344# to that level are automatically included in the table of contents, even if
345# they do not have an id attribute.
346# Note: This feature currently applies only to Markdown headings.
347# Minimum value: 0, maximum value: 99, default value: 5.
348# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
349
350TOC_INCLUDE_HEADINGS = 5
351
352# When enabled doxygen tries to link words that correspond to documented
353# classes, or namespaces to their corresponding documentation. Such a link can
354# be prevented in individual cases by putting a % sign in front of the word or
355# globally by setting AUTOLINK_SUPPORT to NO.
356# The default value is: YES.
357
358AUTOLINK_SUPPORT = YES
359
360# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
361# to include (a tag file for) the STL sources as input, then you should set this
362# tag to YES in order to let doxygen match functions declarations and
363# definitions whose arguments contain STL classes (e.g. func(std::string);
364# versus func(std::string) {}). This also make the inheritance and collaboration
365# diagrams that involve STL classes more complete and accurate.
366# The default value is: NO.
367
368BUILTIN_STL_SUPPORT = NO
369
370# If you use Microsoft's C++/CLI language, you should set this option to YES to
371# enable parsing support.
372# The default value is: NO.
373
374CPP_CLI_SUPPORT = NO
375
376# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
377# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
378# will parse them like normal C++ but will assume all classes use public instead
379# of private inheritance when no explicit protection keyword is present.
380# The default value is: NO.
381
382SIP_SUPPORT = NO
383
384# For Microsoft's IDL there are propget and propput attributes to indicate
385# getter and setter methods for a property. Setting this option to YES will make
386# doxygen to replace the get and set methods by a property in the documentation.
387# This will only work if the methods are indeed getting or setting a simple
388# type. If this is not the case, or you want to show the methods anyway, you
389# should set this option to NO.
390# The default value is: YES.
391
392IDL_PROPERTY_SUPPORT = YES
393
394# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
395# tag is set to YES then doxygen will reuse the documentation of the first
396# member in the group (if any) for the other members of the group. By default
397# all members of a group must be documented explicitly.
398# The default value is: NO.
399
400DISTRIBUTE_GROUP_DOC = NO
401
402# If one adds a struct or class to a group and this option is enabled, then also
403# any nested class or struct is added to the same group. By default this option
404# is disabled and one has to add nested compounds explicitly via \ingroup.
405# The default value is: NO.
406
407GROUP_NESTED_COMPOUNDS = NO
408
409# Set the SUBGROUPING tag to YES to allow class member groups of the same type
410# (for instance a group of public functions) to be put as a subgroup of that
411# type (e.g. under the Public Functions section). Set it to NO to prevent
412# subgrouping. Alternatively, this can be done per class using the
413# \nosubgrouping command.
414# The default value is: YES.
415
416SUBGROUPING = YES
417
418# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
419# are shown inside the group in which they are included (e.g. using \ingroup)
420# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
421# and RTF).
422#
423# Note that this feature does not work in combination with
424# SEPARATE_MEMBER_PAGES.
425# The default value is: NO.
426
427INLINE_GROUPED_CLASSES = NO
428
429# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
430# with only public data fields or simple typedef fields will be shown inline in
431# the documentation of the scope in which they are defined (i.e. file,
432# namespace, or group documentation), provided this scope is documented. If set
433# to NO, structs, classes, and unions are shown on a separate page (for HTML and
434# Man pages) or section (for LaTeX and RTF).
435# The default value is: NO.
436
437INLINE_SIMPLE_STRUCTS = NO
438
439# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
440# enum is documented as struct, union, or enum with the name of the typedef. So
441# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
442# with name TypeT. When disabled the typedef will appear as a member of a file,
443# namespace, or class. And the struct will be named TypeS. This can typically be
444# useful for C code in case the coding convention dictates that all compound
445# types are typedef'ed and only the typedef is referenced, never the tag name.
446# The default value is: NO.
447
448TYPEDEF_HIDES_STRUCT = NO
449
450# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
451# cache is used to resolve symbols given their name and scope. Since this can be
452# an expensive process and often the same symbol appears multiple times in the
453# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
454# doxygen will become slower. If the cache is too large, memory is wasted. The
455# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
456# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
457# symbols. At the end of a run doxygen will report the cache usage and suggest
458# the optimal cache size from a speed point of view.
459# Minimum value: 0, maximum value: 9, default value: 0.
460
461LOOKUP_CACHE_SIZE = 0
462
463# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
464# during processing. When set to 0 doxygen will based this on the number of
465# cores available in the system. You can set it explicitly to a value larger
466# than 0 to get more control over the balance between CPU load and processing
467# speed. At this moment only the input processing can be done using multiple
468# threads. Since this is still an experimental feature the default is set to 1,
469# which efficively disables parallel processing. Please report any issues you
470# encounter. Generating dot graphs in parallel is controlled by the
471# DOT_NUM_THREADS setting.
472# Minimum value: 0, maximum value: 32, default value: 1.
473
474NUM_PROC_THREADS = 1
475
476#---------------------------------------------------------------------------
477# Build related configuration options
478#---------------------------------------------------------------------------
479
480# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
481# documentation are documented, even if no documentation was available. Private
482# class members and static file members will be hidden unless the
483# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
484# Note: This will also disable the warnings about undocumented members that are
485# normally produced when WARNINGS is set to YES.
486# The default value is: NO.
487
488EXTRACT_ALL = NO
489
490# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
491# be included in the documentation.
492# The default value is: NO.
493
494EXTRACT_PRIVATE = NO
495
496# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual
497# methods of a class will be included in the documentation.
498# The default value is: NO.
499
500EXTRACT_PRIV_VIRTUAL = NO
501
502# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
503# scope will be included in the documentation.
504# The default value is: NO.
505
506EXTRACT_PACKAGE = NO
507
508# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
509# included in the documentation.
510# The default value is: NO.
511
512EXTRACT_STATIC = NO
513
514# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
515# locally in source files will be included in the documentation. If set to NO,
516# only classes defined in header files are included. Does not have any effect
517# for Java sources.
518# The default value is: YES.
519
520EXTRACT_LOCAL_CLASSES = YES
521
522# This flag is only useful for Objective-C code. If set to YES, local methods,
523# which are defined in the implementation section but not in the interface are
524# included in the documentation. If set to NO, only methods in the interface are
525# included.
526# The default value is: NO.
527
528EXTRACT_LOCAL_METHODS = NO
529
530# If this flag is set to YES, the members of anonymous namespaces will be
531# extracted and appear in the documentation as a namespace called
532# 'anonymous_namespace{file}', where file will be replaced with the base name of
533# the file that contains the anonymous namespace. By default anonymous namespace
534# are hidden.
535# The default value is: NO.
536
537EXTRACT_ANON_NSPACES = NO
538
539# If this flag is set to YES, the name of an unnamed parameter in a declaration
540# will be determined by the corresponding definition. By default unnamed
541# parameters remain unnamed in the output.
542# The default value is: YES.
543
544RESOLVE_UNNAMED_PARAMS = YES
545
546# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
547# undocumented members inside documented classes or files. If set to NO these
548# members will be included in the various overviews, but no documentation
549# section is generated. This option has no effect if EXTRACT_ALL is enabled.
550# The default value is: NO.
551
552HIDE_UNDOC_MEMBERS = NO
553
554# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
555# undocumented classes that are normally visible in the class hierarchy. If set
556# to NO, these classes will be included in the various overviews. This option
557# has no effect if EXTRACT_ALL is enabled.
558# The default value is: NO.
559
560HIDE_UNDOC_CLASSES = NO
561
562# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
563# declarations. If set to NO, these declarations will be included in the
564# documentation.
565# The default value is: NO.
566
567HIDE_FRIEND_COMPOUNDS = NO
568
569# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
570# documentation blocks found inside the body of a function. If set to NO, these
571# blocks will be appended to the function's detailed documentation block.
572# The default value is: NO.
573
574HIDE_IN_BODY_DOCS = NO
575
576# The INTERNAL_DOCS tag determines if documentation that is typed after a
577# \internal command is included. If the tag is set to NO then the documentation
578# will be excluded. Set it to YES to include the internal documentation.
579# The default value is: NO.
580
581INTERNAL_DOCS = NO
582
583# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
584# able to match the capabilities of the underlying filesystem. In case the
585# filesystem is case sensitive (i.e. it supports files in the same directory
586# whose names only differ in casing), the option must be set to YES to properly
587# deal with such files in case they appear in the input. For filesystems that
588# are not case sensitive the option should be be set to NO to properly deal with
589# output files written for symbols that only differ in casing, such as for two
590# classes, one named CLASS and the other named Class, and to also support
591# references to files without having to specify the exact matching casing. On
592# Windows (including Cygwin) and MacOS, users should typically set this option
593# to NO, whereas on Linux or other Unix flavors it should typically be set to
594# YES.
595# The default value is: system dependent.
596
597CASE_SENSE_NAMES = YES
598
599# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
600# their full class and namespace scopes in the documentation. If set to YES, the
601# scope will be hidden.
602# The default value is: NO.
603
604HIDE_SCOPE_NAMES = NO
605
606# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
607# append additional text to a page's title, such as Class Reference. If set to
608# YES the compound reference will be hidden.
609# The default value is: NO.
610
611HIDE_COMPOUND_REFERENCE= NO
612
613# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
614# the files that are included by a file in the documentation of that file.
615# The default value is: YES.
616
617SHOW_INCLUDE_FILES = YES
618
619# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
620# grouped member an include statement to the documentation, telling the reader
621# which file to include in order to use the member.
622# The default value is: NO.
623
624SHOW_GROUPED_MEMB_INC = NO
625
626# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
627# files with double quotes in the documentation rather than with sharp brackets.
628# The default value is: NO.
629
630FORCE_LOCAL_INCLUDES = NO
631
632# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
633# documentation for inline members.
634# The default value is: YES.
635
636INLINE_INFO = YES
637
638# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
639# (detailed) documentation of file and class members alphabetically by member
640# name. If set to NO, the members will appear in declaration order.
641# The default value is: YES.
642
643SORT_MEMBER_DOCS = YES
644
645# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
646# descriptions of file, namespace and class members alphabetically by member
647# name. If set to NO, the members will appear in declaration order. Note that
648# this will also influence the order of the classes in the class list.
649# The default value is: NO.
650
651SORT_BRIEF_DOCS = NO
652
653# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
654# (brief and detailed) documentation of class members so that constructors and
655# destructors are listed first. If set to NO the constructors will appear in the
656# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
657# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
658# member documentation.
659# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
660# detailed member documentation.
661# The default value is: NO.
662
663SORT_MEMBERS_CTORS_1ST = NO
664
665# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
666# of group names into alphabetical order. If set to NO the group names will
667# appear in their defined order.
668# The default value is: NO.
669
670SORT_GROUP_NAMES = NO
671
672# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
673# fully-qualified names, including namespaces. If set to NO, the class list will
674# be sorted only by class name, not including the namespace part.
675# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
676# Note: This option applies only to the class list, not to the alphabetical
677# list.
678# The default value is: NO.
679
680SORT_BY_SCOPE_NAME = NO
681
682# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
683# type resolution of all parameters of a function it will reject a match between
684# the prototype and the implementation of a member function even if there is
685# only one candidate or it is obvious which candidate to choose by doing a
686# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
687# accept a match between prototype and implementation in such cases.
688# The default value is: NO.
689
690STRICT_PROTO_MATCHING = NO
691
692# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
693# list. This list is created by putting \todo commands in the documentation.
694# The default value is: YES.
695
696GENERATE_TODOLIST = YES
697
698# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
699# list. This list is created by putting \test commands in the documentation.
700# The default value is: YES.
701
702GENERATE_TESTLIST = YES
703
704# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
705# list. This list is created by putting \bug commands in the documentation.
706# The default value is: YES.
707
708GENERATE_BUGLIST = YES
709
710# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
711# the deprecated list. This list is created by putting \deprecated commands in
712# the documentation.
713# The default value is: YES.
714
715GENERATE_DEPRECATEDLIST= YES
716
717# The ENABLED_SECTIONS tag can be used to enable conditional documentation
718# sections, marked by \if <section_label> ... \endif and \cond <section_label>
719# ... \endcond blocks.
720
721ENABLED_SECTIONS =
722
723# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
724# initial value of a variable or macro / define can have for it to appear in the
725# documentation. If the initializer consists of more lines than specified here
726# it will be hidden. Use a value of 0 to hide initializers completely. The
727# appearance of the value of individual variables and macros / defines can be
728# controlled using \showinitializer or \hideinitializer command in the
729# documentation regardless of this setting.
730# Minimum value: 0, maximum value: 10000, default value: 30.
731
732MAX_INITIALIZER_LINES = 30
733
734# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
735# the bottom of the documentation of classes and structs. If set to YES, the
736# list will mention the files that were used to generate the documentation.
737# The default value is: YES.
738
739SHOW_USED_FILES = YES
740
741# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
742# will remove the Files entry from the Quick Index and from the Folder Tree View
743# (if specified).
744# The default value is: YES.
745
746SHOW_FILES = YES
747
748# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
749# page. This will remove the Namespaces entry from the Quick Index and from the
750# Folder Tree View (if specified).
751# The default value is: YES.
752
753SHOW_NAMESPACES = YES
754
755# The FILE_VERSION_FILTER tag can be used to specify a program or script that
756# doxygen should invoke to get the current version for each file (typically from
757# the version control system). Doxygen will invoke the program by executing (via
758# popen()) the command command input-file, where command is the value of the
759# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
760# by doxygen. Whatever the program writes to standard output is used as the file
761# version. For an example see the documentation.
762
763FILE_VERSION_FILTER =
764
765# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
766# by doxygen. The layout file controls the global structure of the generated
767# output files in an output format independent way. To create the layout file
768# that represents doxygen's defaults, run doxygen with the -l option. You can
769# optionally specify a file name after the option, if omitted DoxygenLayout.xml
770# will be used as the name of the layout file.
771#
772# Note that if you run doxygen from a directory containing a file called
773# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
774# tag is left empty.
775
776LAYOUT_FILE =
777
778# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
779# the reference definitions. This must be a list of .bib files. The .bib
780# extension is automatically appended if omitted. This requires the bibtex tool
781# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
782# For LaTeX the style of the bibliography can be controlled using
783# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
784# search path. See also \cite for info how to create references.
785
786CITE_BIB_FILES =
787
788#---------------------------------------------------------------------------
789# Configuration options related to warning and progress messages
790#---------------------------------------------------------------------------
791
792# The QUIET tag can be used to turn on/off the messages that are generated to
793# standard output by doxygen. If QUIET is set to YES this implies that the
794# messages are off.
795# The default value is: NO.
796
797QUIET = NO
798
799# The WARNINGS tag can be used to turn on/off the warning messages that are
800# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
801# this implies that the warnings are on.
802#
803# Tip: Turn warnings on while writing the documentation.
804# The default value is: YES.
805
806WARNINGS = YES
807
808# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
809# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
810# will automatically be disabled.
811# The default value is: YES.
812
813WARN_IF_UNDOCUMENTED = YES
814
815# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
816# potential errors in the documentation, such as not documenting some parameters
817# in a documented function, or documenting parameters that don't exist or using
818# markup commands wrongly.
819# The default value is: YES.
820
821WARN_IF_DOC_ERROR = YES
822
823# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
824# are documented, but have no documentation for their parameters or return
825# value. If set to NO, doxygen will only warn about wrong or incomplete
826# parameter documentation, but not about the absence of documentation. If
827# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
828# The default value is: NO.
829
830WARN_NO_PARAMDOC = NO
831
832# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
833# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
834# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
835# at the end of the doxygen process doxygen will return with a non-zero status.
836# Possible values are: NO, YES and FAIL_ON_WARNINGS.
837# The default value is: NO.
838
839WARN_AS_ERROR = NO
840
841# The WARN_FORMAT tag determines the format of the warning messages that doxygen
842# can produce. The string should contain the $file, $line, and $text tags, which
843# will be replaced by the file and line number from which the warning originated
844# and the warning text. Optionally the format may contain $version, which will
845# be replaced by the version of the file (if it could be obtained via
846# FILE_VERSION_FILTER)
847# The default value is: $file:$line: $text.
848
849WARN_FORMAT = "$file:$line: $text"
850
851# The WARN_LOGFILE tag can be used to specify a file to which warning and error
852# messages should be written. If left blank the output is written to standard
853# error (stderr).
854
855WARN_LOGFILE =
856
857#---------------------------------------------------------------------------
858# Configuration options related to the input files
859#---------------------------------------------------------------------------
860
861# The INPUT tag is used to specify the files and/or directories that contain
862# documented source files. You may enter file names like myfile.cpp or
863# directories like /usr/src/myproject. Separate the files or directories with
864# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
865# Note: If this tag is empty the current directory is searched.
866
867INPUT = src/pointer/types
868
869# This tag can be used to specify the character encoding of the source files
870# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
871# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
872# documentation (see:
873# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
874# The default value is: UTF-8.
875
876INPUT_ENCODING = UTF-8
877
878# If the value of the INPUT tag contains directories, you can use the
879# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
880# *.h) to filter out the source-files in the directories.
881#
882# Note that for custom extensions or not directly supported extensions you also
883# need to set EXTENSION_MAPPING for the extension otherwise the files are not
884# read by doxygen.
885#
886# Note the list of default checked file patterns might differ from the list of
887# default file extension mappings.
888#
889# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
890# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
891# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
892# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
893# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl,
894# *.ucf, *.qsf and *.ice.
895
896FILE_PATTERNS = *.c \
897*.cc \
898*.cxx \
899*.cpp \
900*.c++ \
901*.java \
902*.ii \
903*.ixx \
904*.ipp \
905*.i++ \
906*.inl \
907*.idl \
908*.ddl \
909*.odl \
910*.h \
911*.hh \
912*.hxx \
913*.hpp \
914*.h++ \
915*.cs \
916*.d \
917*.php \
918*.php4 \
919*.php5 \
920*.phtml \
921*.inc \
922*.m \
923*.markdown \
924*.md \
925*.mm \
926*.dox \
927*.py \
928*.pyw \
929*.f90 \
930*.f95 \
931*.f03 \
932*.f08 \
933*.f18 \
934*.f \
935*.for \
936*.vhd \
937*.vhdl \
938*.ucf \
939*.qsf \
940*.ice
941
942# The RECURSIVE tag can be used to specify whether or not subdirectories should
943# be searched for input files as well.
944# The default value is: NO.
945
946RECURSIVE = YES
947
948# The EXCLUDE tag can be used to specify files and/or directories that should be
949# excluded from the INPUT source files. This way you can easily exclude a
950# subdirectory from a directory tree whose root is specified with the INPUT tag.
951#
952# Note that relative paths are relative to the directory from which doxygen is
953# run.
954
955EXCLUDE =
956
957# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
958# directories that are symbolic links (a Unix file system feature) are excluded
959# from the input.
960# The default value is: NO.
961
962EXCLUDE_SYMLINKS = NO
963
964# If the value of the INPUT tag contains directories, you can use the
965# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
966# certain files from those directories.
967#
968# Note that the wildcards are matched against the file with absolute path, so to
969# exclude all test directories for example use the pattern */test/*
970
971EXCLUDE_PATTERNS =
972
973# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
974# (namespaces, classes, functions, etc.) that should be excluded from the
975# output. The symbol name can be a fully qualified name, a word, or if the
976# wildcard * is used, a substring. Examples: ANamespace, AClass,
977# AClass::ANamespace, ANamespace::*Test
978#
979# Note that the wildcards are matched against the file with absolute path, so to
980# exclude all test directories use the pattern */test/*
981
982EXCLUDE_SYMBOLS =
983
984# The EXAMPLE_PATH tag can be used to specify one or more files or directories
985# that contain example code fragments that are included (see the \include
986# command).
987
988EXAMPLE_PATH =
989
990# If the value of the EXAMPLE_PATH tag contains directories, you can use the
991# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
992# *.h) to filter out the source-files in the directories. If left blank all
993# files are included.
994
995EXAMPLE_PATTERNS = *
996
997# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
998# searched for input files to be used with the \include or \dontinclude commands
999# irrespective of the value of the RECURSIVE tag.
1000# The default value is: NO.
1001
1002EXAMPLE_RECURSIVE = NO
1003
1004# The IMAGE_PATH tag can be used to specify one or more files or directories
1005# that contain images that are to be included in the documentation (see the
1006# \image command).
1007
1008IMAGE_PATH = resources
1009
1010# The INPUT_FILTER tag can be used to specify a program that doxygen should
1011# invoke to filter for each input file. Doxygen will invoke the filter program
1012# by executing (via popen()) the command:
1013#
1014# <filter> <input-file>
1015#
1016# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
1017# name of an input file. Doxygen will then use the output that the filter
1018# program writes to standard output. If FILTER_PATTERNS is specified, this tag
1019# will be ignored.
1020#
1021# Note that the filter must not add or remove lines; it is applied before the
1022# code is scanned, but not when the output code is generated. If lines are added
1023# or removed, the anchors will not be placed correctly.
1024#
1025# Note that for custom extensions or not directly supported extensions you also
1026# need to set EXTENSION_MAPPING for the extension otherwise the files are not
1027# properly processed by doxygen.
1028
1029INPUT_FILTER =
1030
1031# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
1032# basis. Doxygen will compare the file name with each pattern and apply the
1033# filter if there is a match. The filters are a list of the form: pattern=filter
1034# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
1035# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
1036# patterns match the file name, INPUT_FILTER is applied.
1037#
1038# Note that for custom extensions or not directly supported extensions you also
1039# need to set EXTENSION_MAPPING for the extension otherwise the files are not
1040# properly processed by doxygen.
1041
1042FILTER_PATTERNS =
1043
1044# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
1045# INPUT_FILTER) will also be used to filter the input files that are used for
1046# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
1047# The default value is: NO.
1048
1049FILTER_SOURCE_FILES = NO
1050
1051# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
1052# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
1053# it is also possible to disable source filtering for a specific pattern using
1054# *.ext= (so without naming a filter).
1055# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
1056
1057FILTER_SOURCE_PATTERNS =
1058
1059# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
1060# is part of the input, its contents will be placed on the main page
1061# (index.html). This can be useful if you have a project on for instance GitHub
1062# and want to reuse the introduction page also for the doxygen output.
1063
1064USE_MDFILE_AS_MAINPAGE =
1065
1066#---------------------------------------------------------------------------
1067# Configuration options related to source browsing
1068#---------------------------------------------------------------------------
1069
1070# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
1071# generated. Documented entities will be cross-referenced with these sources.
1072#
1073# Note: To get rid of all source code in the generated output, make sure that
1074# also VERBATIM_HEADERS is set to NO.
1075# The default value is: NO.
1076
1077SOURCE_BROWSER = NO
1078
1079# Setting the INLINE_SOURCES tag to YES will include the body of functions,
1080# classes and enums directly into the documentation.
1081# The default value is: NO.
1082
1083INLINE_SOURCES = NO
1084
1085# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
1086# special comment blocks from generated source code fragments. Normal C, C++ and
1087# Fortran comments will always remain visible.
1088# The default value is: YES.
1089
1090STRIP_CODE_COMMENTS = YES
1091
1092# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
1093# entity all documented functions referencing it will be listed.
1094# The default value is: NO.
1095
1096REFERENCED_BY_RELATION = NO
1097
1098# If the REFERENCES_RELATION tag is set to YES then for each documented function
1099# all documented entities called/used by that function will be listed.
1100# The default value is: NO.
1101
1102REFERENCES_RELATION = NO
1103
1104# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
1105# to YES then the hyperlinks from functions in REFERENCES_RELATION and
1106# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
1107# link to the documentation.
1108# The default value is: YES.
1109
1110REFERENCES_LINK_SOURCE = YES
1111
1112# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
1113# source code will show a tooltip with additional information such as prototype,
1114# brief description and links to the definition and documentation. Since this
1115# will make the HTML file larger and loading of large files a bit slower, you
1116# can opt to disable this feature.
1117# The default value is: YES.
1118# This tag requires that the tag SOURCE_BROWSER is set to YES.
1119
1120SOURCE_TOOLTIPS = YES
1121
1122# If the USE_HTAGS tag is set to YES then the references to source code will
1123# point to the HTML generated by the htags(1) tool instead of doxygen built-in
1124# source browser. The htags tool is part of GNU's global source tagging system
1125# (see https://www.gnu.org/software/global/global.html). You will need version
1126# 4.8.6 or higher.
1127#
1128# To use it do the following:
1129# - Install the latest version of global
1130# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
1131# - Make sure the INPUT points to the root of the source tree
1132# - Run doxygen as normal
1133#
1134# Doxygen will invoke htags (and that will in turn invoke gtags), so these
1135# tools must be available from the command line (i.e. in the search path).
1136#
1137# The result: instead of the source browser generated by doxygen, the links to
1138# source code will now point to the output of htags.
1139# The default value is: NO.
1140# This tag requires that the tag SOURCE_BROWSER is set to YES.
1141
1142USE_HTAGS = NO
1143
1144# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
1145# verbatim copy of the header file for each class for which an include is
1146# specified. Set to NO to disable this.
1147# See also: Section \class.
1148# The default value is: YES.
1149
1150VERBATIM_HEADERS = YES
1151
1152# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
1153# clang parser (see:
1154# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
1155# performance. This can be particularly helpful with template rich C++ code for
1156# which doxygen's built-in parser lacks the necessary type information.
1157# Note: The availability of this option depends on whether or not doxygen was
1158# generated with the -Duse_libclang=ON option for CMake.
1159# The default value is: NO.
1160
1161CLANG_ASSISTED_PARSING = NO
1162
1163# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to
1164# YES then doxygen will add the directory of each input to the include path.
1165# The default value is: YES.
1166
1167CLANG_ADD_INC_PATHS = YES
1168
1169# If clang assisted parsing is enabled you can provide the compiler with command
1170# line options that you would normally use when invoking the compiler. Note that
1171# the include paths will already be set by doxygen for the files and directories
1172# specified with INPUT and INCLUDE_PATH.
1173# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
1174
1175CLANG_OPTIONS =
1176
1177# If clang assisted parsing is enabled you can provide the clang parser with the
1178# path to the directory containing a file called compile_commands.json. This
1179# file is the compilation database (see:
1180# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
1181# options used when the source files were built. This is equivalent to
1182# specifying the -p option to a clang tool, such as clang-check. These options
1183# will then be passed to the parser. Any options specified with CLANG_OPTIONS
1184# will be added as well.
1185# Note: The availability of this option depends on whether or not doxygen was
1186# generated with the -Duse_libclang=ON option for CMake.
1187
1188CLANG_DATABASE_PATH =
1189
1190#---------------------------------------------------------------------------
1191# Configuration options related to the alphabetical class index
1192#---------------------------------------------------------------------------
1193
1194# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1195# compounds will be generated. Enable this if the project contains a lot of
1196# classes, structs, unions or interfaces.
1197# The default value is: YES.
1198
1199ALPHABETICAL_INDEX = YES
1200
1201# In case all classes in a project start with a common prefix, all classes will
1202# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
1203# can be used to specify a prefix (or a list of prefixes) that should be ignored
1204# while generating the index headers.
1205# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1206
1207IGNORE_PREFIX =
1208
1209#---------------------------------------------------------------------------
1210# Configuration options related to the HTML output
1211#---------------------------------------------------------------------------
1212
1213# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1214# The default value is: YES.
1215
1216GENERATE_HTML = YES
1217
1218# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1219# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1220# it.
1221# The default directory is: html.
1222# This tag requires that the tag GENERATE_HTML is set to YES.
1223
1224HTML_OUTPUT = html
1225
1226# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1227# generated HTML page (for example: .htm, .php, .asp).
1228# The default value is: .html.
1229# This tag requires that the tag GENERATE_HTML is set to YES.
1230
1231HTML_FILE_EXTENSION = .html
1232
1233# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1234# each generated HTML page. If the tag is left blank doxygen will generate a
1235# standard header.
1236#
1237# To get valid HTML the header file that includes any scripts and style sheets
1238# that doxygen needs, which is dependent on the configuration options used (e.g.
1239# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1240# default header using
1241# doxygen -w html new_header.html new_footer.html new_stylesheet.css
1242# YourConfigFile
1243# and then modify the file new_header.html. See also section "Doxygen usage"
1244# for information on how to generate the default header that doxygen normally
1245# uses.
1246# Note: The header is subject to change so you typically have to regenerate the
1247# default header when upgrading to a newer version of doxygen. For a description
1248# of the possible markers and block names see the documentation.
1249# This tag requires that the tag GENERATE_HTML is set to YES.
1250
1251HTML_HEADER =
1252
1253# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1254# generated HTML page. If the tag is left blank doxygen will generate a standard
1255# footer. See HTML_HEADER for more information on how to generate a default
1256# footer and what special commands can be used inside the footer. See also
1257# section "Doxygen usage" for information on how to generate the default footer
1258# that doxygen normally uses.
1259# This tag requires that the tag GENERATE_HTML is set to YES.
1260
1261HTML_FOOTER =
1262
1263# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1264# sheet that is used by each HTML page. It can be used to fine-tune the look of
1265# the HTML output. If left blank doxygen will generate a default style sheet.
1266# See also section "Doxygen usage" for information on how to generate the style
1267# sheet that doxygen normally uses.
1268# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1269# it is more robust and this tag (HTML_STYLESHEET) will in the future become
1270# obsolete.
1271# This tag requires that the tag GENERATE_HTML is set to YES.
1272
1273HTML_STYLESHEET =
1274
1275# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1276# cascading style sheets that are included after the standard style sheets
1277# created by doxygen. Using this option one can overrule certain style aspects.
1278# This is preferred over using HTML_STYLESHEET since it does not replace the
1279# standard style sheet and is therefore more robust against future updates.
1280# Doxygen will copy the style sheet files to the output directory.
1281# Note: The order of the extra style sheet files is of importance (e.g. the last
1282# style sheet in the list overrules the setting of the previous ones in the
1283# list). For an example see the documentation.
1284# This tag requires that the tag GENERATE_HTML is set to YES.
1285
1286HTML_EXTRA_STYLESHEET =
1287
1288# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1289# other source files which should be copied to the HTML output directory. Note
1290# that these files will be copied to the base HTML output directory. Use the
1291# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1292# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1293# files will be copied as-is; there are no commands or markers available.
1294# This tag requires that the tag GENERATE_HTML is set to YES.
1295
1296HTML_EXTRA_FILES =
1297
1298# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
1299# will adjust the colors in the style sheet and background images according to
1300# this color. Hue is specified as an angle on a colorwheel, see
1301# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
1302# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
1303# purple, and 360 is red again.
1304# Minimum value: 0, maximum value: 359, default value: 220.
1305# This tag requires that the tag GENERATE_HTML is set to YES.
1306
1307HTML_COLORSTYLE_HUE = 220
1308
1309# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
1310# in the HTML output. For a value of 0 the output will use grayscales only. A
1311# value of 255 will produce the most vivid colors.
1312# Minimum value: 0, maximum value: 255, default value: 100.
1313# This tag requires that the tag GENERATE_HTML is set to YES.
1314
1315HTML_COLORSTYLE_SAT = 100
1316
1317# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1318# luminance component of the colors in the HTML output. Values below 100
1319# gradually make the output lighter, whereas values above 100 make the output
1320# darker. The value divided by 100 is the actual gamma applied, so 80 represents
1321# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
1322# change the gamma.
1323# Minimum value: 40, maximum value: 240, default value: 80.
1324# This tag requires that the tag GENERATE_HTML is set to YES.
1325
1326HTML_COLORSTYLE_GAMMA = 80
1327
1328# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1329# page will contain the date and time when the page was generated. Setting this
1330# to YES can help to show when doxygen was last run and thus if the
1331# documentation is up to date.
1332# The default value is: NO.
1333# This tag requires that the tag GENERATE_HTML is set to YES.
1334
1335HTML_TIMESTAMP = NO
1336
1337# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
1338# documentation will contain a main index with vertical navigation menus that
1339# are dynamically created via JavaScript. If disabled, the navigation index will
1340# consists of multiple levels of tabs that are statically embedded in every HTML
1341# page. Disable this option to support browsers that do not have JavaScript,
1342# like the Qt help browser.
1343# The default value is: YES.
1344# This tag requires that the tag GENERATE_HTML is set to YES.
1345
1346HTML_DYNAMIC_MENUS = YES
1347
1348# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1349# documentation will contain sections that can be hidden and shown after the
1350# page has loaded.
1351# The default value is: NO.
1352# This tag requires that the tag GENERATE_HTML is set to YES.
1353
1354HTML_DYNAMIC_SECTIONS = NO
1355
1356# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
1357# shown in the various tree structured indices initially; the user can expand
1358# and collapse entries dynamically later on. Doxygen will expand the tree to
1359# such a level that at most the specified number of entries are visible (unless
1360# a fully collapsed tree already exceeds this amount). So setting the number of
1361# entries 1 will produce a full collapsed tree by default. 0 is a special value
1362# representing an infinite number of entries and will result in a full expanded
1363# tree by default.
1364# Minimum value: 0, maximum value: 9999, default value: 100.
1365# This tag requires that the tag GENERATE_HTML is set to YES.
1366
1367HTML_INDEX_NUM_ENTRIES = 100
1368
1369# If the GENERATE_DOCSET tag is set to YES, additional index files will be
1370# generated that can be used as input for Apple's Xcode 3 integrated development
1371# environment (see:
1372# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
1373# create a documentation set, doxygen will generate a Makefile in the HTML
1374# output directory. Running make will produce the docset in that directory and
1375# running make install will install the docset in
1376# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
1377# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
1378# genXcode/_index.html for more information.
1379# The default value is: NO.
1380# This tag requires that the tag GENERATE_HTML is set to YES.
1381
1382GENERATE_DOCSET = NO
1383
1384# This tag determines the name of the docset feed. A documentation feed provides
1385# an umbrella under which multiple documentation sets from a single provider
1386# (such as a company or product suite) can be grouped.
1387# The default value is: Doxygen generated docs.
1388# This tag requires that the tag GENERATE_DOCSET is set to YES.
1389
1390DOCSET_FEEDNAME = "Doxygen generated docs"
1391
1392# This tag specifies a string that should uniquely identify the documentation
1393# set bundle. This should be a reverse domain-name style string, e.g.
1394# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1395# The default value is: org.doxygen.Project.
1396# This tag requires that the tag GENERATE_DOCSET is set to YES.
1397
1398DOCSET_BUNDLE_ID = org.doxygen.Project
1399
1400# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
1401# the documentation publisher. This should be a reverse domain-name style
1402# string, e.g. com.mycompany.MyDocSet.documentation.
1403# The default value is: org.doxygen.Publisher.
1404# This tag requires that the tag GENERATE_DOCSET is set to YES.
1405
1406DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1407
1408# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
1409# The default value is: Publisher.
1410# This tag requires that the tag GENERATE_DOCSET is set to YES.
1411
1412DOCSET_PUBLISHER_NAME = Publisher
1413
1414# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1415# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1416# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
1417# (see:
1418# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows.
1419#
1420# The HTML Help Workshop contains a compiler that can convert all HTML output
1421# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1422# files are now used as the Windows 98 help format, and will replace the old
1423# Windows help format (.hlp) on all Windows platforms in the future. Compressed
1424# HTML files also contain an index, a table of contents, and you can search for
1425# words in the documentation. The HTML workshop also contains a viewer for
1426# compressed HTML files.
1427# The default value is: NO.
1428# This tag requires that the tag GENERATE_HTML is set to YES.
1429
1430GENERATE_HTMLHELP = NO
1431
1432# The CHM_FILE tag can be used to specify the file name of the resulting .chm
1433# file. You can add a path in front of the file if the result should not be
1434# written to the html output directory.
1435# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1436
1437CHM_FILE =
1438
1439# The HHC_LOCATION tag can be used to specify the location (absolute path
1440# including file name) of the HTML help compiler (hhc.exe). If non-empty,
1441# doxygen will try to run the HTML help compiler on the generated index.hhp.
1442# The file has to be specified with full path.
1443# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1444
1445HHC_LOCATION =
1446
1447# The GENERATE_CHI flag controls if a separate .chi index file is generated
1448# (YES) or that it should be included in the main .chm file (NO).
1449# The default value is: NO.
1450# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1451
1452GENERATE_CHI = NO
1453
1454# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
1455# and project file content.
1456# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1457
1458CHM_INDEX_ENCODING =
1459
1460# The BINARY_TOC flag controls whether a binary table of contents is generated
1461# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
1462# enables the Previous and Next buttons.
1463# The default value is: NO.
1464# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1465
1466BINARY_TOC = NO
1467
1468# The TOC_EXPAND flag can be set to YES to add extra items for group members to
1469# the table of contents of the HTML help documentation and to the tree view.
1470# The default value is: NO.
1471# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1472
1473TOC_EXPAND = NO
1474
1475# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1476# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
1477# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1478# (.qch) of the generated HTML documentation.
1479# The default value is: NO.
1480# This tag requires that the tag GENERATE_HTML is set to YES.
1481
1482GENERATE_QHP = NO
1483
1484# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1485# the file name of the resulting .qch file. The path specified is relative to
1486# the HTML output folder.
1487# This tag requires that the tag GENERATE_QHP is set to YES.
1488
1489QCH_FILE =
1490
1491# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1492# Project output. For more information please see Qt Help Project / Namespace
1493# (see:
1494# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
1495# The default value is: org.doxygen.Project.
1496# This tag requires that the tag GENERATE_QHP is set to YES.
1497
1498QHP_NAMESPACE = org.doxygen.Project
1499
1500# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1501# Help Project output. For more information please see Qt Help Project / Virtual
1502# Folders (see:
1503# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
1504# The default value is: doc.
1505# This tag requires that the tag GENERATE_QHP is set to YES.
1506
1507QHP_VIRTUAL_FOLDER = doc
1508
1509# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
1510# filter to add. For more information please see Qt Help Project / Custom
1511# Filters (see:
1512# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
1513# This tag requires that the tag GENERATE_QHP is set to YES.
1514
1515QHP_CUST_FILTER_NAME =
1516
1517# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
1518# custom filter to add. For more information please see Qt Help Project / Custom
1519# Filters (see:
1520# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
1521# This tag requires that the tag GENERATE_QHP is set to YES.
1522
1523QHP_CUST_FILTER_ATTRS =
1524
1525# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1526# project's filter section matches. Qt Help Project / Filter Attributes (see:
1527# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
1528# This tag requires that the tag GENERATE_QHP is set to YES.
1529
1530QHP_SECT_FILTER_ATTRS =
1531
1532# The QHG_LOCATION tag can be used to specify the location (absolute path
1533# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
1534# run qhelpgenerator on the generated .qhp file.
1535# This tag requires that the tag GENERATE_QHP is set to YES.
1536
1537QHG_LOCATION =
1538
1539# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1540# generated, together with the HTML files, they form an Eclipse help plugin. To
1541# install this plugin and make it available under the help contents menu in
1542# Eclipse, the contents of the directory containing the HTML and XML files needs
1543# to be copied into the plugins directory of eclipse. The name of the directory
1544# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
1545# After copying Eclipse needs to be restarted before the help appears.
1546# The default value is: NO.
1547# This tag requires that the tag GENERATE_HTML is set to YES.
1548
1549GENERATE_ECLIPSEHELP = NO
1550
1551# A unique identifier for the Eclipse help plugin. When installing the plugin
1552# the directory name containing the HTML and XML files should also have this
1553# name. Each documentation set should have its own identifier.
1554# The default value is: org.doxygen.Project.
1555# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1556
1557ECLIPSE_DOC_ID = org.doxygen.Project
1558
1559# If you want full control over the layout of the generated HTML pages it might
1560# be necessary to disable the index and replace it with your own. The
1561# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1562# of each HTML page. A value of NO enables the index and the value YES disables
1563# it. Since the tabs in the index contain the same information as the navigation
1564# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1565# The default value is: NO.
1566# This tag requires that the tag GENERATE_HTML is set to YES.
1567
1568DISABLE_INDEX = NO
1569
1570# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1571# structure should be generated to display hierarchical information. If the tag
1572# value is set to YES, a side panel will be generated containing a tree-like
1573# index structure (just like the one that is generated for HTML Help). For this
1574# to work a browser that supports JavaScript, DHTML, CSS and frames is required
1575# (i.e. any modern browser). Windows users are probably better off using the
1576# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
1577# further fine-tune the look of the index. As an example, the default style
1578# sheet generated by doxygen has an example that shows how to put an image at
1579# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
1580# the same information as the tab index, you could consider setting
1581# DISABLE_INDEX to YES when enabling this option.
1582# The default value is: NO.
1583# This tag requires that the tag GENERATE_HTML is set to YES.
1584
1585GENERATE_TREEVIEW = NO
1586
1587# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1588# doxygen will group on one line in the generated HTML documentation.
1589#
1590# Note that a value of 0 will completely suppress the enum values from appearing
1591# in the overview section.
1592# Minimum value: 0, maximum value: 20, default value: 4.
1593# This tag requires that the tag GENERATE_HTML is set to YES.
1594
1595ENUM_VALUES_PER_LINE = 4
1596
1597# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
1598# to set the initial width (in pixels) of the frame in which the tree is shown.
1599# Minimum value: 0, maximum value: 1500, default value: 250.
1600# This tag requires that the tag GENERATE_HTML is set to YES.
1601
1602TREEVIEW_WIDTH = 250
1603
1604# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1605# external symbols imported via tag files in a separate window.
1606# The default value is: NO.
1607# This tag requires that the tag GENERATE_HTML is set to YES.
1608
1609EXT_LINKS_IN_WINDOW = NO
1610
1611# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
1612# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
1613# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
1614# the HTML output. These images will generally look nicer at scaled resolutions.
1615# Possible values are: png (the default) and svg (looks nicer but requires the
1616# pdf2svg or inkscape tool).
1617# The default value is: png.
1618# This tag requires that the tag GENERATE_HTML is set to YES.
1619
1620HTML_FORMULA_FORMAT = png
1621
1622# Use this tag to change the font size of LaTeX formulas included as images in
1623# the HTML documentation. When you change the font size after a successful
1624# doxygen run you need to manually remove any form_*.png images from the HTML
1625# output directory to force them to be regenerated.
1626# Minimum value: 8, maximum value: 50, default value: 10.
1627# This tag requires that the tag GENERATE_HTML is set to YES.
1628
1629FORMULA_FONTSIZE = 10
1630
1631# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
1632# generated for formulas are transparent PNGs. Transparent PNGs are not
1633# supported properly for IE 6.0, but are supported on all modern browsers.
1634#
1635# Note that when changing this option you need to delete any form_*.png files in
1636# the HTML output directory before the changes have effect.
1637# The default value is: YES.
1638# This tag requires that the tag GENERATE_HTML is set to YES.
1639
1640FORMULA_TRANSPARENT = YES
1641
1642# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
1643# to create new LaTeX commands to be used in formulas as building blocks. See
1644# the section "Including formulas" for details.
1645
1646FORMULA_MACROFILE =
1647
1648# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1649# https://www.mathjax.org) which uses client side JavaScript for the rendering
1650# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
1651# installed or if you want to formulas look prettier in the HTML output. When
1652# enabled you may also need to install MathJax separately and configure the path
1653# to it using the MATHJAX_RELPATH option.
1654# The default value is: NO.
1655# This tag requires that the tag GENERATE_HTML is set to YES.
1656
1657USE_MATHJAX = NO
1658
1659# When MathJax is enabled you can set the default output format to be used for
1660# the MathJax output. See the MathJax site (see:
1661# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details.
1662# Possible values are: HTML-CSS (which is slower, but has the best
1663# compatibility), NativeMML (i.e. MathML) and SVG.
1664# The default value is: HTML-CSS.
1665# This tag requires that the tag USE_MATHJAX is set to YES.
1666
1667MATHJAX_FORMAT = HTML-CSS
1668
1669# When MathJax is enabled you need to specify the location relative to the HTML
1670# output directory using the MATHJAX_RELPATH option. The destination directory
1671# should contain the MathJax.js script. For instance, if the mathjax directory
1672# is located at the same level as the HTML output directory, then
1673# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1674# Content Delivery Network so you can quickly see the result without installing
1675# MathJax. However, it is strongly recommended to install a local copy of
1676# MathJax from https://www.mathjax.org before deployment.
1677# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
1678# This tag requires that the tag USE_MATHJAX is set to YES.
1679
1680MATHJAX_RELPATH = https://cdn.jsdelivr.net/npm/mathjax@2
1681
1682# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1683# extension names that should be enabled during MathJax rendering. For example
1684# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
1685# This tag requires that the tag USE_MATHJAX is set to YES.
1686
1687MATHJAX_EXTENSIONS =
1688
1689# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1690# of code that will be used on startup of the MathJax code. See the MathJax site
1691# (see:
1692# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
1693# example see the documentation.
1694# This tag requires that the tag USE_MATHJAX is set to YES.
1695
1696MATHJAX_CODEFILE =
1697
1698# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1699# the HTML output. The underlying search engine uses javascript and DHTML and
1700# should work on any modern browser. Note that when using HTML help
1701# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
1702# there is already a search function so this one should typically be disabled.
1703# For large projects the javascript based search engine can be slow, then
1704# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1705# search using the keyboard; to jump to the search box use <access key> + S
1706# (what the <access key> is depends on the OS and browser, but it is typically
1707# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
1708# key> to jump into the search results window, the results can be navigated
1709# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
1710# the search. The filter options can be selected when the cursor is inside the
1711# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
1712# to select a filter and <Enter> or <escape> to activate or cancel the filter
1713# option.
1714# The default value is: YES.
1715# This tag requires that the tag GENERATE_HTML is set to YES.
1716
1717SEARCHENGINE = YES
1718
1719# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1720# implemented using a web server instead of a web client using JavaScript. There
1721# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
1722# setting. When disabled, doxygen will generate a PHP script for searching and
1723# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
1724# and searching needs to be provided by external tools. See the section
1725# "External Indexing and Searching" for details.
1726# The default value is: NO.
1727# This tag requires that the tag SEARCHENGINE is set to YES.
1728
1729SERVER_BASED_SEARCH = NO
1730
1731# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
1732# script for searching. Instead the search results are written to an XML file
1733# which needs to be processed by an external indexer. Doxygen will invoke an
1734# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
1735# search results.
1736#
1737# Doxygen ships with an example indexer (doxyindexer) and search engine
1738# (doxysearch.cgi) which are based on the open source search engine library
1739# Xapian (see:
1740# https://xapian.org/).
1741#
1742# See the section "External Indexing and Searching" for details.
1743# The default value is: NO.
1744# This tag requires that the tag SEARCHENGINE is set to YES.
1745
1746EXTERNAL_SEARCH = NO
1747
1748# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1749# which will return the search results when EXTERNAL_SEARCH is enabled.
1750#
1751# Doxygen ships with an example indexer (doxyindexer) and search engine
1752# (doxysearch.cgi) which are based on the open source search engine library
1753# Xapian (see:
1754# https://xapian.org/). See the section "External Indexing and Searching" for
1755# details.
1756# This tag requires that the tag SEARCHENGINE is set to YES.
1757
1758SEARCHENGINE_URL =
1759
1760# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1761# search data is written to a file for indexing by an external tool. With the
1762# SEARCHDATA_FILE tag the name of this file can be specified.
1763# The default file is: searchdata.xml.
1764# This tag requires that the tag SEARCHENGINE is set to YES.
1765
1766SEARCHDATA_FILE = searchdata.xml
1767
1768# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
1769# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1770# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1771# projects and redirect the results back to the right project.
1772# This tag requires that the tag SEARCHENGINE is set to YES.
1773
1774EXTERNAL_SEARCH_ID =
1775
1776# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1777# projects other than the one defined by this configuration file, but that are
1778# all added to the same external search index. Each project needs to have a
1779# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
1780# to a relative location where the documentation can be found. The format is:
1781# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
1782# This tag requires that the tag SEARCHENGINE is set to YES.
1783
1784EXTRA_SEARCH_MAPPINGS =
1785
1786#---------------------------------------------------------------------------
1787# Configuration options related to the LaTeX output
1788#---------------------------------------------------------------------------
1789
1790# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
1791# The default value is: YES.
1792
1793GENERATE_LATEX = YES
1794
1795# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
1796# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1797# it.
1798# The default directory is: latex.
1799# This tag requires that the tag GENERATE_LATEX is set to YES.
1800
1801LATEX_OUTPUT = latex
1802
1803# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1804# invoked.
1805#
1806# Note that when not enabling USE_PDFLATEX the default is latex when enabling
1807# USE_PDFLATEX the default is pdflatex and when in the later case latex is
1808# chosen this is overwritten by pdflatex. For specific output languages the
1809# default can have been set differently, this depends on the implementation of
1810# the output language.
1811# This tag requires that the tag GENERATE_LATEX is set to YES.
1812
1813LATEX_CMD_NAME =
1814
1815# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
1816# index for LaTeX.
1817# Note: This tag is used in the Makefile / make.bat.
1818# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file
1819# (.tex).
1820# The default file is: makeindex.
1821# This tag requires that the tag GENERATE_LATEX is set to YES.
1822
1823MAKEINDEX_CMD_NAME = makeindex
1824
1825# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to
1826# generate index for LaTeX. In case there is no backslash (\) as first character
1827# it will be automatically added in the LaTeX code.
1828# Note: This tag is used in the generated output file (.tex).
1829# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat.
1830# The default value is: makeindex.
1831# This tag requires that the tag GENERATE_LATEX is set to YES.
1832
1833LATEX_MAKEINDEX_CMD = makeindex
1834
1835# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
1836# documents. This may be useful for small projects and may help to save some
1837# trees in general.
1838# The default value is: NO.
1839# This tag requires that the tag GENERATE_LATEX is set to YES.
1840
1841COMPACT_LATEX = NO
1842
1843# The PAPER_TYPE tag can be used to set the paper type that is used by the
1844# printer.
1845# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
1846# 14 inches) and executive (7.25 x 10.5 inches).
1847# The default value is: a4.
1848# This tag requires that the tag GENERATE_LATEX is set to YES.
1849
1850PAPER_TYPE = a4
1851
1852# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
1853# that should be included in the LaTeX output. The package can be specified just
1854# by its name or with the correct syntax as to be used with the LaTeX
1855# \usepackage command. To get the times font for instance you can specify :
1856# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
1857# To use the option intlimits with the amsmath package you can specify:
1858# EXTRA_PACKAGES=[intlimits]{amsmath}
1859# If left blank no extra packages will be included.
1860# This tag requires that the tag GENERATE_LATEX is set to YES.
1861
1862EXTRA_PACKAGES =
1863
1864# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
1865# generated LaTeX document. The header should contain everything until the first
1866# chapter. If it is left blank doxygen will generate a standard header. See
1867# section "Doxygen usage" for information on how to let doxygen write the
1868# default header to a separate file.
1869#
1870# Note: Only use a user-defined header if you know what you are doing! The
1871# following commands have a special meaning inside the header: $title,
1872# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
1873# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
1874# string, for the replacement values of the other commands the user is referred
1875# to HTML_HEADER.
1876# This tag requires that the tag GENERATE_LATEX is set to YES.
1877
1878LATEX_HEADER =
1879
1880# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
1881# generated LaTeX document. The footer should contain everything after the last
1882# chapter. If it is left blank doxygen will generate a standard footer. See
1883# LATEX_HEADER for more information on how to generate a default footer and what
1884# special commands can be used inside the footer.
1885#
1886# Note: Only use a user-defined footer if you know what you are doing!
1887# This tag requires that the tag GENERATE_LATEX is set to YES.
1888
1889LATEX_FOOTER =
1890
1891# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1892# LaTeX style sheets that are included after the standard style sheets created
1893# by doxygen. Using this option one can overrule certain style aspects. Doxygen
1894# will copy the style sheet files to the output directory.
1895# Note: The order of the extra style sheet files is of importance (e.g. the last
1896# style sheet in the list overrules the setting of the previous ones in the
1897# list).
1898# This tag requires that the tag GENERATE_LATEX is set to YES.
1899
1900LATEX_EXTRA_STYLESHEET =
1901
1902# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
1903# other source files which should be copied to the LATEX_OUTPUT output
1904# directory. Note that the files will be copied as-is; there are no commands or
1905# markers available.
1906# This tag requires that the tag GENERATE_LATEX is set to YES.
1907
1908LATEX_EXTRA_FILES =
1909
1910# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
1911# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
1912# contain links (just like the HTML output) instead of page references. This
1913# makes the output suitable for online browsing using a PDF viewer.
1914# The default value is: YES.
1915# This tag requires that the tag GENERATE_LATEX is set to YES.
1916
1917PDF_HYPERLINKS = YES
1918
1919# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
1920# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
1921# files. Set this option to YES, to get a higher quality PDF documentation.
1922#
1923# See also section LATEX_CMD_NAME for selecting the engine.
1924# The default value is: YES.
1925# This tag requires that the tag GENERATE_LATEX is set to YES.
1926
1927USE_PDFLATEX = YES
1928
1929# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
1930# command to the generated LaTeX files. This will instruct LaTeX to keep running
1931# if errors occur, instead of asking the user for help. This option is also used
1932# when generating formulas in HTML.
1933# The default value is: NO.
1934# This tag requires that the tag GENERATE_LATEX is set to YES.
1935
1936LATEX_BATCHMODE = NO
1937
1938# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
1939# index chapters (such as File Index, Compound Index, etc.) in the output.
1940# The default value is: NO.
1941# This tag requires that the tag GENERATE_LATEX is set to YES.
1942
1943LATEX_HIDE_INDICES = NO
1944
1945# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
1946# code with syntax highlighting in the LaTeX output.
1947#
1948# Note that which sources are shown also depends on other settings such as
1949# SOURCE_BROWSER.
1950# The default value is: NO.
1951# This tag requires that the tag GENERATE_LATEX is set to YES.
1952
1953LATEX_SOURCE_CODE = NO
1954
1955# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1956# bibliography, e.g. plainnat, or ieeetr. See
1957# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
1958# The default value is: plain.
1959# This tag requires that the tag GENERATE_LATEX is set to YES.
1960
1961LATEX_BIB_STYLE = plain
1962
1963# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
1964# page will contain the date and time when the page was generated. Setting this
1965# to NO can help when comparing the output of multiple runs.
1966# The default value is: NO.
1967# This tag requires that the tag GENERATE_LATEX is set to YES.
1968
1969LATEX_TIMESTAMP = NO
1970
1971# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
1972# path from which the emoji images will be read. If a relative path is entered,
1973# it will be relative to the LATEX_OUTPUT directory. If left blank the
1974# LATEX_OUTPUT directory will be used.
1975# This tag requires that the tag GENERATE_LATEX is set to YES.
1976
1977LATEX_EMOJI_DIRECTORY =
1978
1979#---------------------------------------------------------------------------
1980# Configuration options related to the RTF output
1981#---------------------------------------------------------------------------
1982
1983# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
1984# RTF output is optimized for Word 97 and may not look too pretty with other RTF
1985# readers/editors.
1986# The default value is: NO.
1987
1988GENERATE_RTF = NO
1989
1990# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
1991# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1992# it.
1993# The default directory is: rtf.
1994# This tag requires that the tag GENERATE_RTF is set to YES.
1995
1996RTF_OUTPUT = rtf
1997
1998# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
1999# documents. This may be useful for small projects and may help to save some
2000# trees in general.
2001# The default value is: NO.
2002# This tag requires that the tag GENERATE_RTF is set to YES.
2003
2004COMPACT_RTF = NO
2005
2006# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
2007# contain hyperlink fields. The RTF file will contain links (just like the HTML
2008# output) instead of page references. This makes the output suitable for online
2009# browsing using Word or some other Word compatible readers that support those
2010# fields.
2011#
2012# Note: WordPad (write) and others do not support links.
2013# The default value is: NO.
2014# This tag requires that the tag GENERATE_RTF is set to YES.
2015
2016RTF_HYPERLINKS = NO
2017
2018# Load stylesheet definitions from file. Syntax is similar to doxygen's
2019# configuration file, i.e. a series of assignments. You only have to provide
2020# replacements, missing definitions are set to their default value.
2021#
2022# See also section "Doxygen usage" for information on how to generate the
2023# default style sheet that doxygen normally uses.
2024# This tag requires that the tag GENERATE_RTF is set to YES.
2025
2026RTF_STYLESHEET_FILE =
2027
2028# Set optional variables used in the generation of an RTF document. Syntax is
2029# similar to doxygen's configuration file. A template extensions file can be
2030# generated using doxygen -e rtf extensionFile.
2031# This tag requires that the tag GENERATE_RTF is set to YES.
2032
2033RTF_EXTENSIONS_FILE =
2034
2035# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
2036# with syntax highlighting in the RTF output.
2037#
2038# Note that which sources are shown also depends on other settings such as
2039# SOURCE_BROWSER.
2040# The default value is: NO.
2041# This tag requires that the tag GENERATE_RTF is set to YES.
2042
2043RTF_SOURCE_CODE = NO
2044
2045#---------------------------------------------------------------------------
2046# Configuration options related to the man page output
2047#---------------------------------------------------------------------------
2048
2049# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
2050# classes and files.
2051# The default value is: NO.
2052
2053GENERATE_MAN = NO
2054
2055# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
2056# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2057# it. A directory man3 will be created inside the directory specified by
2058# MAN_OUTPUT.
2059# The default directory is: man.
2060# This tag requires that the tag GENERATE_MAN is set to YES.
2061
2062MAN_OUTPUT = man
2063
2064# The MAN_EXTENSION tag determines the extension that is added to the generated
2065# man pages. In case the manual section does not start with a number, the number
2066# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
2067# optional.
2068# The default value is: .3.
2069# This tag requires that the tag GENERATE_MAN is set to YES.
2070
2071MAN_EXTENSION = .3
2072
2073# The MAN_SUBDIR tag determines the name of the directory created within
2074# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
2075# MAN_EXTENSION with the initial . removed.
2076# This tag requires that the tag GENERATE_MAN is set to YES.
2077
2078MAN_SUBDIR =
2079
2080# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
2081# will generate one additional man file for each entity documented in the real
2082# man page(s). These additional files only source the real man page, but without
2083# them the man command would be unable to find the correct page.
2084# The default value is: NO.
2085# This tag requires that the tag GENERATE_MAN is set to YES.
2086
2087MAN_LINKS = NO
2088
2089#---------------------------------------------------------------------------
2090# Configuration options related to the XML output
2091#---------------------------------------------------------------------------
2092
2093# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
2094# captures the structure of the code including all documentation.
2095# The default value is: NO.
2096
2097GENERATE_XML = NO
2098
2099# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
2100# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2101# it.
2102# The default directory is: xml.
2103# This tag requires that the tag GENERATE_XML is set to YES.
2104
2105XML_OUTPUT = xml
2106
2107# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
2108# listings (including syntax highlighting and cross-referencing information) to
2109# the XML output. Note that enabling this will significantly increase the size
2110# of the XML output.
2111# The default value is: YES.
2112# This tag requires that the tag GENERATE_XML is set to YES.
2113
2114XML_PROGRAMLISTING = YES
2115
2116# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
2117# namespace members in file scope as well, matching the HTML output.
2118# The default value is: NO.
2119# This tag requires that the tag GENERATE_XML is set to YES.
2120
2121XML_NS_MEMB_FILE_SCOPE = NO
2122
2123#---------------------------------------------------------------------------
2124# Configuration options related to the DOCBOOK output
2125#---------------------------------------------------------------------------
2126
2127# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
2128# that can be used to generate PDF.
2129# The default value is: NO.
2130
2131GENERATE_DOCBOOK = NO
2132
2133# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
2134# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
2135# front of it.
2136# The default directory is: docbook.
2137# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
2138
2139DOCBOOK_OUTPUT = docbook
2140
2141# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
2142# program listings (including syntax highlighting and cross-referencing
2143# information) to the DOCBOOK output. Note that enabling this will significantly
2144# increase the size of the DOCBOOK output.
2145# The default value is: NO.
2146# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
2147
2148DOCBOOK_PROGRAMLISTING = NO
2149
2150#---------------------------------------------------------------------------
2151# Configuration options for the AutoGen Definitions output
2152#---------------------------------------------------------------------------
2153
2154# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
2155# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
2156# the structure of the code including all documentation. Note that this feature
2157# is still experimental and incomplete at the moment.
2158# The default value is: NO.
2159
2160GENERATE_AUTOGEN_DEF = NO
2161
2162#---------------------------------------------------------------------------
2163# Configuration options related to the Perl module output
2164#---------------------------------------------------------------------------
2165
2166# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
2167# file that captures the structure of the code including all documentation.
2168#
2169# Note that this feature is still experimental and incomplete at the moment.
2170# The default value is: NO.
2171
2172GENERATE_PERLMOD = NO
2173
2174# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
2175# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
2176# output from the Perl module output.
2177# The default value is: NO.
2178# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2179
2180PERLMOD_LATEX = NO
2181
2182# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
2183# formatted so it can be parsed by a human reader. This is useful if you want to
2184# understand what is going on. On the other hand, if this tag is set to NO, the
2185# size of the Perl module output will be much smaller and Perl will parse it
2186# just the same.
2187# The default value is: YES.
2188# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2189
2190PERLMOD_PRETTY = YES
2191
2192# The names of the make variables in the generated doxyrules.make file are
2193# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
2194# so different doxyrules.make files included by the same Makefile don't
2195# overwrite each other's variables.
2196# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2197
2198PERLMOD_MAKEVAR_PREFIX =
2199
2200#---------------------------------------------------------------------------
2201# Configuration options related to the preprocessor
2202#---------------------------------------------------------------------------
2203
2204# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
2205# C-preprocessor directives found in the sources and include files.
2206# The default value is: YES.
2207
2208ENABLE_PREPROCESSING = YES
2209
2210# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
2211# in the source code. If set to NO, only conditional compilation will be
2212# performed. Macro expansion can be done in a controlled way by setting
2213# EXPAND_ONLY_PREDEF to YES.
2214# The default value is: NO.
2215# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2216
2217MACRO_EXPANSION = NO
2218
2219# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
2220# the macro expansion is limited to the macros specified with the PREDEFINED and
2221# EXPAND_AS_DEFINED tags.
2222# The default value is: NO.
2223# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2224
2225EXPAND_ONLY_PREDEF = NO
2226
2227# If the SEARCH_INCLUDES tag is set to YES, the include files in the
2228# INCLUDE_PATH will be searched if a #include is found.
2229# The default value is: YES.
2230# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2231
2232SEARCH_INCLUDES = YES
2233
2234# The INCLUDE_PATH tag can be used to specify one or more directories that
2235# contain include files that are not input files but should be processed by the
2236# preprocessor.
2237# This tag requires that the tag SEARCH_INCLUDES is set to YES.
2238
2239INCLUDE_PATH =
2240
2241# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
2242# patterns (like *.h and *.hpp) to filter out the header-files in the
2243# directories. If left blank, the patterns specified with FILE_PATTERNS will be
2244# used.
2245# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2246
2247INCLUDE_FILE_PATTERNS =
2248
2249# The PREDEFINED tag can be used to specify one or more macro names that are
2250# defined before the preprocessor is started (similar to the -D option of e.g.
2251# gcc). The argument of the tag is a list of macros of the form: name or
2252# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
2253# is assumed. To prevent a macro definition from being undefined via #undef or
2254# recursively expanded use the := operator instead of the = operator.
2255# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2256
2257PREDEFINED =
2258
2259# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
2260# tag can be used to specify a list of macro names that should be expanded. The
2261# macro definition that is found in the sources will be used. Use the PREDEFINED
2262# tag if you want to use a different macro definition that overrules the
2263# definition found in the source code.
2264# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2265
2266EXPAND_AS_DEFINED =
2267
2268# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2269# remove all references to function-like macros that are alone on a line, have
2270# an all uppercase name, and do not end with a semicolon. Such function macros
2271# are typically used for boiler-plate code, and will confuse the parser if not
2272# removed.
2273# The default value is: YES.
2274# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2275
2276SKIP_FUNCTION_MACROS = YES
2277
2278#---------------------------------------------------------------------------
2279# Configuration options related to external references
2280#---------------------------------------------------------------------------
2281
2282# The TAGFILES tag can be used to specify one or more tag files. For each tag
2283# file the location of the external documentation should be added. The format of
2284# a tag file without this location is as follows:
2285# TAGFILES = file1 file2 ...
2286# Adding location for the tag files is done as follows:
2287# TAGFILES = file1=loc1 "file2 = loc2" ...
2288# where loc1 and loc2 can be relative or absolute paths or URLs. See the
2289# section "Linking to external documentation" for more information about the use
2290# of tag files.
2291# Note: Each tag file must have a unique name (where the name does NOT include
2292# the path). If a tag file is not located in the directory in which doxygen is
2293# run, you must also specify the path to the tagfile here.
2294
2295TAGFILES =
2296
2297# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2298# tag file that is based on the input files it reads. See section "Linking to
2299# external documentation" for more information about the usage of tag files.
2300
2301GENERATE_TAGFILE =
2302
2303# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
2304# the class index. If set to NO, only the inherited external classes will be
2305# listed.
2306# The default value is: NO.
2307
2308ALLEXTERNALS = NO
2309
2310# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
2311# in the modules index. If set to NO, only the current project's groups will be
2312# listed.
2313# The default value is: YES.
2314
2315EXTERNAL_GROUPS = YES
2316
2317# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
2318# the related pages index. If set to NO, only the current project's pages will
2319# be listed.
2320# The default value is: YES.
2321
2322EXTERNAL_PAGES = YES
2323
2324#---------------------------------------------------------------------------
2325# Configuration options related to the dot tool
2326#---------------------------------------------------------------------------
2327
2328# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
2329# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2330# NO turns the diagrams off. Note that this option also works with HAVE_DOT
2331# disabled, but it is recommended to install and use dot, since it yields more
2332# powerful graphs.
2333# The default value is: YES.
2334
2335CLASS_DIAGRAMS = YES
2336
2337# You can include diagrams made with dia in doxygen documentation. Doxygen will
2338# then run dia to produce the diagram and insert it in the documentation. The
2339# DIA_PATH tag allows you to specify the directory where the dia binary resides.
2340# If left empty dia is assumed to be found in the default search path.
2341
2342DIA_PATH =
2343
2344# If set to YES the inheritance and collaboration graphs will hide inheritance
2345# and usage relations if the target is undocumented or is not a class.
2346# The default value is: YES.
2347
2348HIDE_UNDOC_RELATIONS = YES
2349
2350# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2351# available from the path. This tool is part of Graphviz (see:
2352# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
2353# Bell Labs. The other options in this section have no effect if this option is
2354# set to NO
2355# The default value is: YES.
2356
2357HAVE_DOT = YES
2358
2359# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2360# to run in parallel. When set to 0 doxygen will base this on the number of
2361# processors available in the system. You can set it explicitly to a value
2362# larger than 0 to get control over the balance between CPU load and processing
2363# speed.
2364# Minimum value: 0, maximum value: 32, default value: 0.
2365# This tag requires that the tag HAVE_DOT is set to YES.
2366
2367DOT_NUM_THREADS = 0
2368
2369# When you want a differently looking font in the dot files that doxygen
2370# generates you can specify the font name using DOT_FONTNAME. You need to make
2371# sure dot is able to find the font, which can be done by putting it in a
2372# standard location or by setting the DOTFONTPATH environment variable or by
2373# setting DOT_FONTPATH to the directory containing the font.
2374# The default value is: Helvetica.
2375# This tag requires that the tag HAVE_DOT is set to YES.
2376
2377DOT_FONTNAME = Helvetica
2378
2379# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2380# dot graphs.
2381# Minimum value: 4, maximum value: 24, default value: 10.
2382# This tag requires that the tag HAVE_DOT is set to YES.
2383
2384DOT_FONTSIZE = 10
2385
2386# By default doxygen will tell dot to use the default font as specified with
2387# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
2388# the path where dot can find it using this tag.
2389# This tag requires that the tag HAVE_DOT is set to YES.
2390
2391DOT_FONTPATH =
2392
2393# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2394# each documented class showing the direct and indirect inheritance relations.
2395# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2396# The default value is: YES.
2397# This tag requires that the tag HAVE_DOT is set to YES.
2398
2399CLASS_GRAPH = YES
2400
2401# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2402# graph for each documented class showing the direct and indirect implementation
2403# dependencies (inheritance, containment, and class references variables) of the
2404# class with other documented classes.
2405# The default value is: YES.
2406# This tag requires that the tag HAVE_DOT is set to YES.
2407
2408COLLABORATION_GRAPH = YES
2409
2410# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2411# groups, showing the direct groups dependencies.
2412# The default value is: YES.
2413# This tag requires that the tag HAVE_DOT is set to YES.
2414
2415GROUP_GRAPHS = YES
2416
2417# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2418# collaboration diagrams in a style similar to the OMG's Unified Modeling
2419# Language.
2420# The default value is: NO.
2421# This tag requires that the tag HAVE_DOT is set to YES.
2422
2423UML_LOOK = NO
2424
2425# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
2426# class node. If there are many fields or methods and many nodes the graph may
2427# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2428# number of items for each type to make the size more manageable. Set this to 0
2429# for no limit. Note that the threshold may be exceeded by 50% before the limit
2430# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2431# but if the number exceeds 15, the total amount of fields shown is limited to
2432# 10.
2433# Minimum value: 0, maximum value: 100, default value: 10.
2434# This tag requires that the tag UML_LOOK is set to YES.
2435
2436UML_LIMIT_NUM_FIELDS = 10
2437
2438# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
2439# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
2440# tag is set to YES, doxygen will add type and arguments for attributes and
2441# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
2442# will not generate fields with class member information in the UML graphs. The
2443# class diagrams will look similar to the default class diagrams but using UML
2444# notation for the relationships.
2445# Possible values are: NO, YES and NONE.
2446# The default value is: NO.
2447# This tag requires that the tag UML_LOOK is set to YES.
2448
2449DOT_UML_DETAILS = NO
2450
2451# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
2452# to display on a single line. If the actual line length exceeds this threshold
2453# significantly it will wrapped across multiple lines. Some heuristics are apply
2454# to avoid ugly line breaks.
2455# Minimum value: 0, maximum value: 1000, default value: 17.
2456# This tag requires that the tag HAVE_DOT is set to YES.
2457
2458DOT_WRAP_THRESHOLD = 17
2459
2460# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2461# collaboration graphs will show the relations between templates and their
2462# instances.
2463# The default value is: NO.
2464# This tag requires that the tag HAVE_DOT is set to YES.
2465
2466TEMPLATE_RELATIONS = NO
2467
2468# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2469# YES then doxygen will generate a graph for each documented file showing the
2470# direct and indirect include dependencies of the file with other documented
2471# files.
2472# The default value is: YES.
2473# This tag requires that the tag HAVE_DOT is set to YES.
2474
2475INCLUDE_GRAPH = YES
2476
2477# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
2478# set to YES then doxygen will generate a graph for each documented file showing
2479# the direct and indirect include dependencies of the file with other documented
2480# files.
2481# The default value is: YES.
2482# This tag requires that the tag HAVE_DOT is set to YES.
2483
2484INCLUDED_BY_GRAPH = YES
2485
2486# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2487# dependency graph for every global function or class method.
2488#
2489# Note that enabling this option will significantly increase the time of a run.
2490# So in most cases it will be better to enable call graphs for selected
2491# functions only using the \callgraph command. Disabling a call graph can be
2492# accomplished by means of the command \hidecallgraph.
2493# The default value is: NO.
2494# This tag requires that the tag HAVE_DOT is set to YES.
2495
2496CALL_GRAPH = NO
2497
2498# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2499# dependency graph for every global function or class method.
2500#
2501# Note that enabling this option will significantly increase the time of a run.
2502# So in most cases it will be better to enable caller graphs for selected
2503# functions only using the \callergraph command. Disabling a caller graph can be
2504# accomplished by means of the command \hidecallergraph.
2505# The default value is: NO.
2506# This tag requires that the tag HAVE_DOT is set to YES.
2507
2508CALLER_GRAPH = NO
2509
2510# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2511# hierarchy of all classes instead of a textual one.
2512# The default value is: YES.
2513# This tag requires that the tag HAVE_DOT is set to YES.
2514
2515GRAPHICAL_HIERARCHY = YES
2516
2517# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2518# dependencies a directory has on other directories in a graphical way. The
2519# dependency relations are determined by the #include relations between the
2520# files in the directories.
2521# The default value is: YES.
2522# This tag requires that the tag HAVE_DOT is set to YES.
2523
2524DIRECTORY_GRAPH = YES
2525
2526# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2527# generated by dot. For an explanation of the image formats see the section
2528# output formats in the documentation of the dot tool (Graphviz (see:
2529# http://www.graphviz.org/)).
2530# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2531# to make the SVG files visible in IE 9+ (other browsers do not have this
2532# requirement).
2533# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
2534# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
2535# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
2536# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
2537# png:gdiplus:gdiplus.
2538# The default value is: png.
2539# This tag requires that the tag HAVE_DOT is set to YES.
2540
2541DOT_IMAGE_FORMAT = png
2542
2543# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2544# enable generation of interactive SVG images that allow zooming and panning.
2545#
2546# Note that this requires a modern browser other than Internet Explorer. Tested
2547# and working are Firefox, Chrome, Safari, and Opera.
2548# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2549# the SVG files visible. Older versions of IE do not have SVG support.
2550# The default value is: NO.
2551# This tag requires that the tag HAVE_DOT is set to YES.
2552
2553INTERACTIVE_SVG = NO
2554
2555# The DOT_PATH tag can be used to specify the path where the dot tool can be
2556# found. If left blank, it is assumed the dot tool can be found in the path.
2557# This tag requires that the tag HAVE_DOT is set to YES.
2558
2559DOT_PATH =
2560
2561# The DOTFILE_DIRS tag can be used to specify one or more directories that
2562# contain dot files that are included in the documentation (see the \dotfile
2563# command).
2564# This tag requires that the tag HAVE_DOT is set to YES.
2565
2566DOTFILE_DIRS =
2567
2568# The MSCFILE_DIRS tag can be used to specify one or more directories that
2569# contain msc files that are included in the documentation (see the \mscfile
2570# command).
2571
2572MSCFILE_DIRS =
2573
2574# The DIAFILE_DIRS tag can be used to specify one or more directories that
2575# contain dia files that are included in the documentation (see the \diafile
2576# command).
2577
2578DIAFILE_DIRS =
2579
2580# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2581# path where java can find the plantuml.jar file. If left blank, it is assumed
2582# PlantUML is not used or called during a preprocessing step. Doxygen will
2583# generate a warning when it encounters a \startuml command in this case and
2584# will not generate output for the diagram.
2585
2586PLANTUML_JAR_PATH =
2587
2588# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
2589# configuration file for plantuml.
2590
2591PLANTUML_CFG_FILE =
2592
2593# When using plantuml, the specified paths are searched for files specified by
2594# the !include statement in a plantuml block.
2595
2596PLANTUML_INCLUDE_PATH =
2597
2598# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2599# that will be shown in the graph. If the number of nodes in a graph becomes
2600# larger than this value, doxygen will truncate the graph, which is visualized
2601# by representing a node as a red box. Note that doxygen if the number of direct
2602# children of the root node in a graph is already larger than
2603# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
2604# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
2605# Minimum value: 0, maximum value: 10000, default value: 50.
2606# This tag requires that the tag HAVE_DOT is set to YES.
2607
2608DOT_GRAPH_MAX_NODES = 50
2609
2610# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2611# generated by dot. A depth value of 3 means that only nodes reachable from the
2612# root by following a path via at most 3 edges will be shown. Nodes that lay
2613# further from the root node will be omitted. Note that setting this option to 1
2614# or 2 may greatly reduce the computation time needed for large code bases. Also
2615# note that the size of a graph can be further restricted by
2616# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
2617# Minimum value: 0, maximum value: 1000, default value: 0.
2618# This tag requires that the tag HAVE_DOT is set to YES.
2619
2620MAX_DOT_GRAPH_DEPTH = 0
2621
2622# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2623# background. This is disabled by default, because dot on Windows does not seem
2624# to support this out of the box.
2625#
2626# Warning: Depending on the platform used, enabling this option may lead to
2627# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2628# read).
2629# The default value is: NO.
2630# This tag requires that the tag HAVE_DOT is set to YES.
2631
2632DOT_TRANSPARENT = NO
2633
2634# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
2635# files in one run (i.e. multiple -o and -T options on the command line). This
2636# makes dot run faster, but since only newer versions of dot (>1.8.10) support
2637# this, this feature is disabled by default.
2638# The default value is: NO.
2639# This tag requires that the tag HAVE_DOT is set to YES.
2640
2641DOT_MULTI_TARGETS = NO
2642
2643# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2644# explaining the meaning of the various boxes and arrows in the dot generated
2645# graphs.
2646# The default value is: YES.
2647# This tag requires that the tag HAVE_DOT is set to YES.
2648
2649GENERATE_LEGEND = YES
2650
2651# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
2652# files that are used to generate the various graphs.
2653#
2654# Note: This setting is not only used for dot files but also for msc and
2655# plantuml temporary files.
2656# The default value is: YES.
2657
2658DOT_CLEANUP = YES