/
balmaster
/
postgres
Обзор
Документация
Войти
/
balmaster
/
postgres
Код
Запросы
0
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
src/backend/utils/cache/relcache.c
7 021 строка
218 KB
Amit Kapila
Use schema-qualified names in EXCEPT clause error messages.
08 май 2026, 07:30
08 май 2026, 07:30
a49b9cf
Код
Авторство
О чём код?
/*------------------------------------------------------------------------- * * relcache.c * POSTGRES relation descriptor cache code * * Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * * IDENTIFICATION * src/backend/utils/cache/relcache.c * *------------------------------------------------------------------------- */ /* * INTERFACE ROUTINES * RelationCacheInitialize - initialize relcache (to empty) * RelationCacheInitializePhase2 - initialize shared-catalog entries * RelationCacheInitializePhase3 - finish initializing relcache * RelationIdGetRelation - get a reldesc by relation id * RelationClose - close an open relation * * NOTES * The following code contains many undocumented hacks. Please be * careful.... */ #include "postgres.h" #include <sys/file.h> #include <fcntl.h> #include <unistd.h> #include "access/htup_details.h" #include "access/multixact.h" #include "access/parallel.h" #include "access/reloptions.h" #include "access/sysattr.h" #include "access/table.h" #include "access/tableam.h" #include "access/tupdesc_details.h" #include "access/xact.h" #include "catalog/binary_upgrade.h" #include "catalog/catalog.h" #include "catalog/indexing.h" #include "catalog/namespace.h" #include "catalog/partition.h" #include "catalog/pg_am.h" #include "catalog/pg_amproc.h" #include "catalog/pg_attrdef.h" #include "catalog/pg_auth_members.h" #include "catalog/pg_authid.h" #include "catalog/pg_constraint.h" #include "catalog/pg_database.h" #include "catalog/pg_namespace.h" #include "catalog/pg_opclass.h" #include "catalog/pg_proc.h" #include "catalog/pg_publication.h" #include "catalog/pg_rewrite.h" #include "catalog/pg_shseclabel.h" #include "catalog/pg_statistic_ext.h" #include "catalog/pg_subscription.h" #include "catalog/pg_tablespace.h" #include "catalog/pg_trigger.h" #include "catalog/pg_type.h" #include "catalog/schemapg.h" #include "catalog/storage.h" #include "commands/policy.h" #include "commands/publicationcmds.h" #include "commands/trigger.h" #include "common/int.h" #include "miscadmin.h" #include "nodes/makefuncs.h" #include "nodes/nodeFuncs.h" #include "optimizer/optimizer.h" #include "pgstat.h" #include "rewrite/rewriteDefine.h" #include "rewrite/rowsecurity.h" #include "storage/fd.h" #include "storage/lmgr.h" #include "storage/lock.h" #include "storage/smgr.h" #include "utils/array.h" #include "utils/builtins.h" #include "utils/catcache.h" #include "utils/datum.h" #include "utils/fmgroids.h" #include "utils/inval.h" #include "utils/lsyscache.h" #include "utils/memutils.h" #include "utils/relmapper.h" #include "utils/resowner.h" #include "utils/snapmgr.h" #include "utils/syscache.h" #define RELCACHE_INIT_FILEMAGIC 0x573266 /* version ID value */ /* * Whether to bother checking if relation cache memory needs to be freed * eagerly. See also RelationBuildDesc() and pg_config_manual.h. */ #if defined(RECOVER_RELATION_BUILD_MEMORY) && (RECOVER_RELATION_BUILD_MEMORY != 0) #define MAYBE_RECOVER_RELATION_BUILD_MEMORY 1 #else #define RECOVER_RELATION_BUILD_MEMORY 0 #ifdef DISCARD_CACHES_ENABLED #define MAYBE_RECOVER_RELATION_BUILD_MEMORY 1 #endif #endif /* * hardcoded tuple descriptors, contents generated by genbki.pl */ static const FormData_pg_attribute Desc_pg_class[Natts_pg_class] = {Schema_pg_class}; static const FormData_pg_attribute Desc_pg_attribute[Natts_pg_attribute] = {Schema_pg_attribute}; static const FormData_pg_attribute Desc_pg_proc[Natts_pg_proc] = {Schema_pg_proc}; static const FormData_pg_attribute Desc_pg_type[Natts_pg_type] = {Schema_pg_type}; static const FormData_pg_attribute Desc_pg_database[Natts_pg_database] = {Schema_pg_database}; static const FormData_pg_attribute Desc_pg_authid[Natts_pg_authid] = {Schema_pg_authid}; static const FormData_pg_attribute Desc_pg_auth_members[Natts_pg_auth_members] = {Schema_pg_auth_members}; static const FormData_pg_attribute Desc_pg_index[Natts_pg_index] = {Schema_pg_index}; static const FormData_pg_attribute Desc_pg_shseclabel[Natts_pg_shseclabel] = {Schema_pg_shseclabel}; static const FormData_pg_attribute Desc_pg_subscription[Natts_pg_subscription] = {Schema_pg_subscription}; /* * Hash tables that index the relation cache * * We used to index the cache by both name and OID, but now there * is only an index by OID. */ typedef struct relidcacheent { Oid reloid; Relation reldesc; } RelIdCacheEnt; static HTAB *RelationIdCache; /* * This flag is false until we have prepared the critical relcache entries * that are needed to do indexscans on the tables read by relcache building. */ bool criticalRelcachesBuilt = false; /* * This flag is false until we have prepared the critical relcache entries * for shared catalogs (which are the tables needed for login). */ bool criticalSharedRelcachesBuilt = false; /* * This counter counts relcache inval events received since backend startup * (but only for rels that are actually in cache). Presently, we use it only * to detect whether data about to be written by write_relcache_init_file() * might already be obsolete. */ static long relcacheInvalsReceived = 0L; /* * in_progress_list is a stack of ongoing RelationBuildDesc() calls. CREATE * INDEX CONCURRENTLY makes catalog changes under ShareUpdateExclusiveLock. * It critically relies on each backend absorbing those changes no later than * next transaction start. Hence, RelationBuildDesc() loops until it finishes * without accepting a relevant invalidation. (Most invalidation consumers * don't do this.) */ typedef struct inprogressent { Oid reloid; /* OID of relation being built */ bool invalidated; /* whether an invalidation arrived for it */ } InProgressEnt; static InProgressEnt *in_progress_list; static int in_progress_list_len; static int in_progress_list_maxlen; /* * eoxact_list[] stores the OIDs of relations that (might) need AtEOXact * cleanup work. This list intentionally has limited size; if it overflows, * we fall back to scanning the whole hashtable. There is no value in a very * large list because (1) at some point, a hash_seq_search scan is faster than * retail lookups, and (2) the value of this is to reduce EOXact work for * short transactions, which can't have dirtied all that many tables anyway. * EOXactListAdd() does not bother to prevent duplicate list entries, so the * cleanup processing must be idempotent. */ #define MAX_EOXACT_LIST 32 static Oid eoxact_list[MAX_EOXACT_LIST]; static int eoxact_list_len = 0; static bool eoxact_list_overflowed = false; #define EOXactListAdd(rel) \ do { \ if (eoxact_list_len < MAX_EOXACT_LIST) \ eoxact_list[eoxact_list_len++] = (rel)->rd_id; \ else \ eoxact_list_overflowed = true; \ } while (0) /* * EOXactTupleDescArray stores TupleDescs that (might) need AtEOXact * cleanup work. The array expands as needed; there is no hashtable because * we don't need to access individual items except at EOXact. */ static TupleDesc *EOXactTupleDescArray; static int NextEOXactTupleDescNum = 0; static int EOXactTupleDescArrayLen = 0; /* * macros to manipulate the lookup hashtable */ #define RelationCacheInsert(RELATION, replace_allowed) \ do { \ RelIdCacheEnt *hentry; bool found; \ hentry = (RelIdCacheEnt *) hash_search(RelationIdCache, \ &((RELATION)->rd_id), \ HASH_ENTER, &found); \ if (found) \ { \ /* see comments in RelationBuildDesc and RelationBuildLocalRelation */ \ Relation _old_rel = hentry->reldesc; \ Assert(replace_allowed); \ hentry->reldesc = (RELATION); \ if (RelationHasReferenceCountZero(_old_rel)) \ RelationDestroyRelation(_old_rel, false); \ else if (!IsBootstrapProcessingMode()) \ elog(WARNING, "leaking still-referenced relcache entry for \"%s\"", \ RelationGetRelationName(_old_rel)); \ } \ else \ hentry->reldesc = (RELATION); \ } while(0) #define RelationIdCacheLookup(ID, RELATION) \ do { \ RelIdCacheEnt *hentry; \ hentry = (RelIdCacheEnt *) hash_search(RelationIdCache, \ &(ID), \ HASH_FIND, NULL); \ if (hentry) \ RELATION = hentry->reldesc; \ else \ RELATION = NULL; \ } while(0) #define RelationCacheDelete(RELATION) \ do { \ RelIdCacheEnt *hentry; \ hentry = (RelIdCacheEnt *) hash_search(RelationIdCache, \ &((RELATION)->rd_id), \ HASH_REMOVE, NULL); \ if (hentry == NULL) \ elog(WARNING, "failed to delete relcache entry for OID %u", \ (RELATION)->rd_id); \ } while(0) /* * Special cache for opclass-related information * * Note: only default support procs get cached, ie, those with * lefttype = righttype = opcintype. */ typedef struct opclasscacheent { Oid opclassoid; /* lookup key: OID of opclass */ bool valid; /* set true after successful fill-in */ StrategyNumber numSupport; /* max # of support procs (from pg_am) */ Oid opcfamily; /* OID of opclass's family */ Oid opcintype; /* OID of opclass's declared input type */ RegProcedure *supportProcs; /* OIDs of support procedures */ } OpClassCacheEnt; static HTAB *OpClassCache = NULL; /* non-export function prototypes */ static void RelationCloseCleanup(Relation relation); static void RelationDestroyRelation(Relation relation, bool remember_tupdesc); static void RelationInvalidateRelation(Relation relation); static void RelationClearRelation(Relation relation); static void RelationRebuildRelation(Relation relation); static void RelationReloadIndexInfo(Relation relation); static void RelationReloadNailed(Relation relation); static void RelationFlushRelation(Relation relation); static void RememberToFreeTupleDescAtEOX(TupleDesc td); #ifdef USE_ASSERT_CHECKING static void AssertPendingSyncConsistency(Relation relation); #endif static void AtEOXact_cleanup(Relation relation, bool isCommit); static void AtEOSubXact_cleanup(Relation relation, bool isCommit, SubTransactionId mySubid, SubTransactionId parentSubid); static bool load_relcache_init_file(bool shared); static void write_relcache_init_file(bool shared); static void write_item(const void *data, Size len, FILE *fp); static void formrdesc(const char *relationName, Oid relationReltype, bool isshared, int natts, const FormData_pg_attribute *attrs); static HeapTuple ScanPgRelation(Oid targetRelId, bool indexOK, bool force_non_historic); static Relation AllocateRelationDesc(Form_pg_class relp); static void RelationParseRelOptions(Relation relation, HeapTuple tuple); static void RelationBuildTupleDesc(Relation relation); static Relation RelationBuildDesc(Oid targetRelId, bool insertIt); static void RelationInitPhysicalAddr(Relation relation); static void load_critical_index(Oid indexoid, Oid heapoid); static TupleDesc GetPgClassDescriptor(void); static TupleDesc GetPgIndexDescriptor(void); static void AttrDefaultFetch(Relation relation, int ndef); static int AttrDefaultCmp(const void *a, const void *b); static void CheckNNConstraintFetch(Relation relation); static int CheckConstraintCmp(const void *a, const void *b); static void InitIndexAmRoutine(Relation relation); static void IndexSupportInitialize(oidvector *indclass, RegProcedure *indexSupport, Oid *opFamily, Oid *opcInType, StrategyNumber maxSupportNumber, AttrNumber maxAttributeNumber); static OpClassCacheEnt *LookupOpclassInfo(Oid operatorClassOid, StrategyNumber numSupport); static void RelationCacheInitFileRemoveInDir(const char *tblspcpath); static void unlink_initfile(const char *initfilename, int elevel); /* * ScanPgRelation * * This is used by RelationBuildDesc to find a pg_class * tuple matching targetRelId. The caller must hold at least * AccessShareLock on the target relid to prevent concurrent-update * scenarios; it isn't guaranteed that all scans used to build the * relcache entry will use the same snapshot. If, for example, * an attribute were to be added after scanning pg_class and before * scanning pg_attribute, relnatts wouldn't match. * * NB: the returned tuple has been copied into palloc'd storage * and must eventually be freed with heap_freetuple. */ static HeapTuple ScanPgRelation(Oid targetRelId, bool indexOK, bool force_non_historic) { HeapTuple pg_class_tuple; Relation pg_class_desc; SysScanDesc pg_class_scan; ScanKeyData key[1]; Snapshot snapshot = NULL; /* * If something goes wrong during backend startup, we might find ourselves * trying to read pg_class before we've selected a database. That ain't * gonna work, so bail out with a useful error message. If this happens, * it probably means a relcache entry that needs to be nailed isn't. */ if (!OidIsValid(MyDatabaseId)) elog(FATAL, "cannot read pg_class without having selected a database"); /* * form a scan key */ ScanKeyInit(&key[0], Anum_pg_class_oid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(targetRelId)); /* * Open pg_class and fetch a tuple. Force heap scan if we haven't yet * built the critical relcache entries (this includes initdb and startup * without a pg_internal.init file). The caller can also force a heap * scan by setting indexOK == false. */ pg_class_desc = table_open(RelationRelationId, AccessShareLock); /* * The caller might need a tuple that's newer than what's visible to the * historic snapshot; currently the only case requiring to do so is * looking up the relfilenumber of non mapped system relations during * decoding. */ if (force_non_historic) snapshot = RegisterSnapshot(GetNonHistoricCatalogSnapshot(RelationRelationId)); pg_class_scan = systable_beginscan(pg_class_desc, ClassOidIndexId, indexOK && criticalRelcachesBuilt, snapshot, 1, key); pg_class_tuple = systable_getnext(pg_class_scan); /* * Must copy tuple before releasing buffer. */ if (HeapTupleIsValid(pg_class_tuple)) pg_class_tuple = heap_copytuple(pg_class_tuple); /* all done */ systable_endscan(pg_class_scan); if (snapshot) UnregisterSnapshot(snapshot); table_close(pg_class_desc, AccessShareLock); return pg_class_tuple; } /* * AllocateRelationDesc * * This is used to allocate memory for a new relation descriptor * and initialize the rd_rel field from the given pg_class tuple. */ static Relation AllocateRelationDesc(Form_pg_class relp) { Relation relation; MemoryContext oldcxt; Form_pg_class relationForm; /* Relcache entries must live in CacheMemoryContext */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); /* * allocate and zero space for new relation descriptor */ relation = palloc0_object(RelationData); /* make sure relation is marked as having no open file yet */ relation->rd_smgr = NULL; /* * Copy the relation tuple form * * We only allocate space for the fixed fields, ie, CLASS_TUPLE_SIZE. The * variable-length fields (relacl, reloptions) are NOT stored in the * relcache --- there'd be little point in it, since we don't copy the * tuple's nulls bitmap and hence wouldn't know if the values are valid. * Bottom line is that relacl *cannot* be retrieved from the relcache. Get * it from the syscache if you need it. The same goes for the original * form of reloptions (however, we do store the parsed form of reloptions * in rd_options). */ relationForm = (Form_pg_class) palloc(CLASS_TUPLE_SIZE); memcpy(relationForm, relp, CLASS_TUPLE_SIZE); /* initialize relation tuple form */ relation->rd_rel = relationForm; /* and allocate attribute tuple form storage */ relation->rd_att = CreateTemplateTupleDesc(relationForm->relnatts); /* which we mark as a reference-counted tupdesc */ relation->rd_att->tdrefcount = 1; MemoryContextSwitchTo(oldcxt); return relation; } /* * RelationParseRelOptions * Convert pg_class.reloptions into pre-parsed rd_options * * tuple is the real pg_class tuple (not rd_rel!) for relation * * Note: rd_rel and (if an index) rd_indam must be valid already */ static void RelationParseRelOptions(Relation relation, HeapTuple tuple) { bytea *options; amoptions_function amoptsfn; relation->rd_options = NULL; /* * Look up any AM-specific parse function; fall out if relkind should not * have options. */ switch (relation->rd_rel->relkind) { case RELKIND_RELATION: case RELKIND_TOASTVALUE: case RELKIND_VIEW: case RELKIND_MATVIEW: case RELKIND_PARTITIONED_TABLE: amoptsfn = NULL; break; case RELKIND_INDEX: case RELKIND_PARTITIONED_INDEX: amoptsfn = relation->rd_indam->amoptions; break; default: return; } /* * Fetch reloptions from tuple; have to use a hardwired descriptor because * we might not have any other for pg_class yet (consider executing this * code for pg_class itself) */ options = extractRelOptions(tuple, GetPgClassDescriptor(), amoptsfn); /* * Copy parsed data into CacheMemoryContext. To guard against the * possibility of leaks in the reloptions code, we want to do the actual * parsing in the caller's memory context and copy the results into * CacheMemoryContext after the fact. */ if (options) { relation->rd_options = MemoryContextAlloc(CacheMemoryContext, VARSIZE(options)); memcpy(relation->rd_options, options, VARSIZE(options)); pfree(options); } } /* * RelationBuildTupleDesc * * Form the relation's tuple descriptor from information in * the pg_attribute, pg_attrdef & pg_constraint system catalogs. */ static void RelationBuildTupleDesc(Relation relation) { HeapTuple pg_attribute_tuple; Relation pg_attribute_desc; SysScanDesc pg_attribute_scan; ScanKeyData skey[2]; int need; TupleConstr *constr; AttrMissing *attrmiss = NULL; int ndef = 0; /* fill rd_att's type ID fields (compare heap.c's AddNewRelationTuple) */ relation->rd_att->tdtypeid = relation->rd_rel->reltype ? relation->rd_rel->reltype : RECORDOID; relation->rd_att->tdtypmod = -1; /* just to be sure */ constr = (TupleConstr *) MemoryContextAllocZero(CacheMemoryContext, sizeof(TupleConstr)); /* * Form a scan key that selects only user attributes (attnum > 0). * (Eliminating system attribute rows at the index level is lots faster * than fetching them.) */ ScanKeyInit(&skey[0], Anum_pg_attribute_attrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); ScanKeyInit(&skey[1], Anum_pg_attribute_attnum, BTGreaterStrategyNumber, F_INT2GT, Int16GetDatum(0)); /* * Open pg_attribute and begin a scan. Force heap scan if we haven't yet * built the critical relcache entries (this includes initdb and startup * without a pg_internal.init file). */ pg_attribute_desc = table_open(AttributeRelationId, AccessShareLock); pg_attribute_scan = systable_beginscan(pg_attribute_desc, AttributeRelidNumIndexId, criticalRelcachesBuilt, NULL, 2, skey); /* * add attribute data to relation->rd_att */ need = RelationGetNumberOfAttributes(relation); while (HeapTupleIsValid(pg_attribute_tuple = systable_getnext(pg_attribute_scan))) { Form_pg_attribute attp; int attnum; attp = (Form_pg_attribute) GETSTRUCT(pg_attribute_tuple); attnum = attp->attnum; if (attnum <= 0 || attnum > RelationGetNumberOfAttributes(relation)) elog(ERROR, "invalid attribute number %d for relation \"%s\"", attp->attnum, RelationGetRelationName(relation)); memcpy(TupleDescAttr(relation->rd_att, attnum - 1), attp, ATTRIBUTE_FIXED_PART_SIZE); populate_compact_attribute(relation->rd_att, attnum - 1); /* Update constraint/default info */ if (attp->attnotnull) constr->has_not_null = true; if (attp->attgenerated == ATTRIBUTE_GENERATED_STORED) constr->has_generated_stored = true; if (attp->attgenerated == ATTRIBUTE_GENERATED_VIRTUAL) constr->has_generated_virtual = true; if (attp->atthasdef) ndef++; /* If the column has a "missing" value, put it in the attrmiss array */ if (attp->atthasmissing) { Datum missingval; bool missingNull; /* Do we have a missing value? */ missingval = heap_getattr(pg_attribute_tuple, Anum_pg_attribute_attmissingval, pg_attribute_desc->rd_att, &missingNull); if (!missingNull) { /* Yes, fetch from the array */ MemoryContext oldcxt; bool is_null; int one = 1; Datum missval; if (attrmiss == NULL) attrmiss = (AttrMissing *) MemoryContextAllocZero(CacheMemoryContext, relation->rd_rel->relnatts * sizeof(AttrMissing)); missval = array_get_element(missingval, 1, &one, -1, attp->attlen, attp->attbyval, attp->attalign, &is_null); Assert(!is_null); if (attp->attbyval) { /* for copy by val just copy the datum direct */ attrmiss[attnum - 1].am_value = missval; } else { /* otherwise copy in the correct context */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); attrmiss[attnum - 1].am_value = datumCopy(missval, attp->attbyval, attp->attlen); MemoryContextSwitchTo(oldcxt); } attrmiss[attnum - 1].am_present = true; } } need--; if (need == 0) break; } /* * end the scan and close the attribute relation */ systable_endscan(pg_attribute_scan); table_close(pg_attribute_desc, AccessShareLock); if (need != 0) elog(ERROR, "pg_attribute catalog is missing %d attribute(s) for relation OID %u", need, RelationGetRelid(relation)); /* * Set up constraint/default info */ if (constr->has_not_null || constr->has_generated_stored || constr->has_generated_virtual || ndef > 0 || attrmiss || relation->rd_rel->relchecks > 0) { bool is_catalog = IsCatalogRelation(relation); relation->rd_att->constr = constr; if (ndef > 0) /* DEFAULTs */ AttrDefaultFetch(relation, ndef); else constr->num_defval = 0; constr->missing = attrmiss; /* CHECK and NOT NULLs */ if (relation->rd_rel->relchecks > 0 || (!is_catalog && constr->has_not_null)) CheckNNConstraintFetch(relation); /* * Any not-null constraint that wasn't marked invalid by * CheckNNConstraintFetch must necessarily be valid; make it so in the * CompactAttribute array. */ if (!is_catalog) { for (int i = 0; i < relation->rd_rel->relnatts; i++) { CompactAttribute *attr; attr = TupleDescCompactAttr(relation->rd_att, i); if (attr->attnullability == ATTNULLABLE_UNKNOWN) attr->attnullability = ATTNULLABLE_VALID; else Assert(attr->attnullability == ATTNULLABLE_INVALID || attr->attnullability == ATTNULLABLE_UNRESTRICTED); } } if (relation->rd_rel->relchecks == 0) constr->num_check = 0; } else { pfree(constr); relation->rd_att->constr = NULL; } TupleDescFinalize(relation->rd_att); } /* * RelationBuildRuleLock * * Form the relation's rewrite rules from information in * the pg_rewrite system catalog. * * Note: The rule parsetrees are potentially very complex node structures. * To allow these trees to be freed when the relcache entry is flushed, * we make a private memory context to hold the RuleLock information for * each relcache entry that has associated rules. The context is used * just for rule info, not for any other subsidiary data of the relcache * entry, because that keeps the update logic in RelationRebuildRelation() * manageable. The other subsidiary data structures are simple enough * to be easy to free explicitly, anyway. * * Note: The relation's reloptions must have been extracted first. */ static void RelationBuildRuleLock(Relation relation) { MemoryContext rulescxt; MemoryContext oldcxt; HeapTuple rewrite_tuple; Relation rewrite_desc; TupleDesc rewrite_tupdesc; SysScanDesc rewrite_scan; ScanKeyData key; RuleLock *rulelock; int numlocks; RewriteRule **rules; int maxlocks; /* * Make the private context. Assume it'll not contain much data. */ rulescxt = AllocSetContextCreate(CacheMemoryContext, "relation rules", ALLOCSET_SMALL_SIZES); relation->rd_rulescxt = rulescxt; MemoryContextCopyAndSetIdentifier(rulescxt, RelationGetRelationName(relation)); /* * allocate an array to hold the rewrite rules (the array is extended if * necessary) */ maxlocks = 4; rules = (RewriteRule **) MemoryContextAlloc(rulescxt, sizeof(RewriteRule *) * maxlocks); numlocks = 0; /* * form a scan key */ ScanKeyInit(&key, Anum_pg_rewrite_ev_class, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); /* * open pg_rewrite and begin a scan * * Note: since we scan the rules using RewriteRelRulenameIndexId, we will * be reading the rules in name order, except possibly during * emergency-recovery operations (ie, IgnoreSystemIndexes). This in turn * ensures that rules will be fired in name order. */ rewrite_desc = table_open(RewriteRelationId, AccessShareLock); rewrite_tupdesc = RelationGetDescr(rewrite_desc); rewrite_scan = systable_beginscan(rewrite_desc, RewriteRelRulenameIndexId, true, NULL, 1, &key); while (HeapTupleIsValid(rewrite_tuple = systable_getnext(rewrite_scan))) { Form_pg_rewrite rewrite_form = (Form_pg_rewrite) GETSTRUCT(rewrite_tuple); bool isnull; Datum rule_datum; char *rule_str; RewriteRule *rule; Oid check_as_user; rule = (RewriteRule *) MemoryContextAlloc(rulescxt, sizeof(RewriteRule)); rule->ruleId = rewrite_form->oid; rule->event = rewrite_form->ev_type - '0'; rule->enabled = rewrite_form->ev_enabled; rule->isInstead = rewrite_form->is_instead; /* * Must use heap_getattr to fetch ev_action and ev_qual. Also, the * rule strings are often large enough to be toasted. To avoid * leaking memory in the caller's context, do the detoasting here so * we can free the detoasted version. */ rule_datum = heap_getattr(rewrite_tuple, Anum_pg_rewrite_ev_action, rewrite_tupdesc, &isnull); Assert(!isnull); rule_str = TextDatumGetCString(rule_datum); oldcxt = MemoryContextSwitchTo(rulescxt); rule->actions = (List *) stringToNode(rule_str); MemoryContextSwitchTo(oldcxt); pfree(rule_str); rule_datum = heap_getattr(rewrite_tuple, Anum_pg_rewrite_ev_qual, rewrite_tupdesc, &isnull); Assert(!isnull); rule_str = TextDatumGetCString(rule_datum); oldcxt = MemoryContextSwitchTo(rulescxt); rule->qual = (Node *) stringToNode(rule_str); MemoryContextSwitchTo(oldcxt); pfree(rule_str); /* * If this is a SELECT rule defining a view, and the view has * "security_invoker" set, we must perform all permissions checks on * relations referred to by the rule as the invoking user. * * In all other cases (including non-SELECT rules on security invoker * views), perform the permissions checks as the relation owner. */ if (rule->event == CMD_SELECT && relation->rd_rel->relkind == RELKIND_VIEW && RelationHasSecurityInvoker(relation)) check_as_user = InvalidOid; else check_as_user = relation->rd_rel->relowner; /* * Scan through the rule's actions and set the checkAsUser field on * all RTEPermissionInfos. We have to look at the qual as well, in * case it contains sublinks. * * The reason for doing this when the rule is loaded, rather than when * it is stored, is that otherwise ALTER TABLE OWNER would have to * grovel through stored rules to update checkAsUser fields. Scanning * the rule tree during load is relatively cheap (compared to * constructing it in the first place), so we do it here. */ setRuleCheckAsUser((Node *) rule->actions, check_as_user); setRuleCheckAsUser(rule->qual, check_as_user); if (numlocks >= maxlocks) { maxlocks *= 2; rules = (RewriteRule **) repalloc(rules, sizeof(RewriteRule *) * maxlocks); } rules[numlocks++] = rule; } /* * end the scan and close the attribute relation */ systable_endscan(rewrite_scan); table_close(rewrite_desc, AccessShareLock); /* * there might not be any rules (if relhasrules is out-of-date) */ if (numlocks == 0) { relation->rd_rules = NULL; relation->rd_rulescxt = NULL; MemoryContextDelete(rulescxt); return; } /* * form a RuleLock and insert into relation */ rulelock = (RuleLock *) MemoryContextAlloc(rulescxt, sizeof(RuleLock)); rulelock->numLocks = numlocks; rulelock->rules = rules; relation->rd_rules = rulelock; } /* * equalRuleLocks * * Determine whether two RuleLocks are equivalent * * Probably this should be in the rules code someplace... */ static bool equalRuleLocks(RuleLock *rlock1, RuleLock *rlock2) { int i; /* * As of 7.3 we assume the rule ordering is repeatable, because * RelationBuildRuleLock should read 'em in a consistent order. So just * compare corresponding slots. */ if (rlock1 != NULL) { if (rlock2 == NULL) return false; if (rlock1->numLocks != rlock2->numLocks) return false; for (i = 0; i < rlock1->numLocks; i++) { RewriteRule *rule1 = rlock1->rules[i]; RewriteRule *rule2 = rlock2->rules[i]; if (rule1->ruleId != rule2->ruleId) return false; if (rule1->event != rule2->event) return false; if (rule1->enabled != rule2->enabled) return false; if (rule1->isInstead != rule2->isInstead) return false; if (!equal(rule1->qual, rule2->qual)) return false; if (!equal(rule1->actions, rule2->actions)) return false; } } else if (rlock2 != NULL) return false; return true; } /* * equalPolicy * * Determine whether two policies are equivalent */ static bool equalPolicy(RowSecurityPolicy *policy1, RowSecurityPolicy *policy2) { int i; Oid *r1, *r2; if (policy1 != NULL) { if (policy2 == NULL) return false; if (policy1->polcmd != policy2->polcmd) return false; if (policy1->hassublinks != policy2->hassublinks) return false; if (strcmp(policy1->policy_name, policy2->policy_name) != 0) return false; if (ARR_DIMS(policy1->roles)[0] != ARR_DIMS(policy2->roles)[0]) return false; r1 = (Oid *) ARR_DATA_PTR(policy1->roles); r2 = (Oid *) ARR_DATA_PTR(policy2->roles); for (i = 0; i < ARR_DIMS(policy1->roles)[0]; i++) { if (r1[i] != r2[i]) return false; } if (!equal(policy1->qual, policy2->qual)) return false; if (!equal(policy1->with_check_qual, policy2->with_check_qual)) return false; } else if (policy2 != NULL) return false; return true; } /* * equalRSDesc * * Determine whether two RowSecurityDesc's are equivalent */ static bool equalRSDesc(RowSecurityDesc *rsdesc1, RowSecurityDesc *rsdesc2) { ListCell *lc, *rc; if (rsdesc1 == NULL && rsdesc2 == NULL) return true; if ((rsdesc1 != NULL && rsdesc2 == NULL) || (rsdesc1 == NULL && rsdesc2 != NULL)) return false; if (list_length(rsdesc1->policies) != list_length(rsdesc2->policies)) return false; /* RelationBuildRowSecurity should build policies in order */ forboth(lc, rsdesc1->policies, rc, rsdesc2->policies) { RowSecurityPolicy *l = (RowSecurityPolicy *) lfirst(lc); RowSecurityPolicy *r = (RowSecurityPolicy *) lfirst(rc); if (!equalPolicy(l, r)) return false; } return true; } /* * RelationBuildDesc * * Build a relation descriptor. The caller must hold at least * AccessShareLock on the target relid. * * The new descriptor is inserted into the hash table if insertIt is true. * * Returns NULL if no pg_class row could be found for the given relid * (suggesting we are trying to access a just-deleted relation). * Any other error is reported via elog. */ static Relation RelationBuildDesc(Oid targetRelId, bool insertIt) { int in_progress_offset; Relation relation; Oid relid; HeapTuple pg_class_tuple; Form_pg_class relp; /* * This function and its subroutines can allocate a good deal of transient * data in CurrentMemoryContext. Traditionally we've just leaked that * data, reasoning that the caller's context is at worst of transaction * scope, and relcache loads shouldn't happen so often that it's essential * to recover transient data before end of statement/transaction. However * that's definitely not true when debug_discard_caches is active, and * perhaps it's not true in other cases. * * When debug_discard_caches is active or when forced to by * RECOVER_RELATION_BUILD_MEMORY=1, arrange to allocate the junk in a * temporary context that we'll free before returning. Make it a child of * caller's context so that it will get cleaned up appropriately if we * error out partway through. */ #ifdef MAYBE_RECOVER_RELATION_BUILD_MEMORY MemoryContext tmpcxt = NULL; MemoryContext oldcxt = NULL; if (RECOVER_RELATION_BUILD_MEMORY || debug_discard_caches > 0) { tmpcxt = AllocSetContextCreate(CurrentMemoryContext, "RelationBuildDesc workspace", ALLOCSET_DEFAULT_SIZES); oldcxt = MemoryContextSwitchTo(tmpcxt); } #endif /* Register to catch invalidation messages */ if (in_progress_list_len >= in_progress_list_maxlen) { int allocsize; allocsize = in_progress_list_maxlen * 2; in_progress_list = repalloc(in_progress_list, allocsize * sizeof(*in_progress_list)); in_progress_list_maxlen = allocsize; } in_progress_offset = in_progress_list_len++; in_progress_list[in_progress_offset].reloid = targetRelId; retry: in_progress_list[in_progress_offset].invalidated = false; /* * find the tuple in pg_class corresponding to the given relation id */ pg_class_tuple = ScanPgRelation(targetRelId, true, false); /* * if no such tuple exists, return NULL */ if (!HeapTupleIsValid(pg_class_tuple)) { #ifdef MAYBE_RECOVER_RELATION_BUILD_MEMORY if (tmpcxt) { /* Return to caller's context, and blow away the temporary context */ MemoryContextSwitchTo(oldcxt); MemoryContextDelete(tmpcxt); } #endif Assert(in_progress_offset + 1 == in_progress_list_len); in_progress_list_len--; return NULL; } /* * get information from the pg_class_tuple */ relp = (Form_pg_class) GETSTRUCT(pg_class_tuple); relid = relp->oid; Assert(relid == targetRelId); /* * allocate storage for the relation descriptor, and copy pg_class_tuple * to relation->rd_rel. */ relation = AllocateRelationDesc(relp); /* * initialize the relation's relation id (relation->rd_id) */ RelationGetRelid(relation) = relid; /* * Normal relations are not nailed into the cache. Since we don't flush * new relations, it won't be new. It could be temp though. */ relation->rd_refcnt = 0; relation->rd_isnailed = false; relation->rd_createSubid = InvalidSubTransactionId; relation->rd_newRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_droppedSubid = InvalidSubTransactionId; switch (relation->rd_rel->relpersistence) { case RELPERSISTENCE_UNLOGGED: case RELPERSISTENCE_PERMANENT: relation->rd_backend = INVALID_PROC_NUMBER; relation->rd_islocaltemp = false; break; case RELPERSISTENCE_TEMP: if (isTempOrTempToastNamespace(relation->rd_rel->relnamespace)) { relation->rd_backend = ProcNumberForTempRelations(); relation->rd_islocaltemp = true; } else { /* * If it's a temp table, but not one of ours, we have to use * the slow, grotty method to figure out the owning backend. * * Note: it's possible that rd_backend gets set to * MyProcNumber here, in case we are looking at a pg_class * entry left over from a crashed backend that coincidentally * had the same ProcNumber we're using. We should *not* * consider such a table to be "ours"; this is why we need the * separate rd_islocaltemp flag. The pg_class entry will get * flushed if/when we clean out the corresponding temp table * namespace in preparation for using it. */ relation->rd_backend = GetTempNamespaceProcNumber(relation->rd_rel->relnamespace); Assert(relation->rd_backend != INVALID_PROC_NUMBER); relation->rd_islocaltemp = false; } break; default: elog(ERROR, "invalid relpersistence: %c", relation->rd_rel->relpersistence); break; } /* * initialize the tuple descriptor (relation->rd_att). */ RelationBuildTupleDesc(relation); /* foreign key data is not loaded till asked for */ relation->rd_fkeylist = NIL; relation->rd_fkeyvalid = false; /* partitioning data is not loaded till asked for */ relation->rd_partkey = NULL; relation->rd_partkeycxt = NULL; relation->rd_partdesc = NULL; relation->rd_partdesc_nodetached = NULL; relation->rd_partdesc_nodetached_xmin = InvalidTransactionId; relation->rd_pdcxt = NULL; relation->rd_pddcxt = NULL; relation->rd_partcheck = NIL; relation->rd_partcheckvalid = false; relation->rd_partcheckcxt = NULL; /* * initialize access method information */ if (relation->rd_rel->relkind == RELKIND_INDEX || relation->rd_rel->relkind == RELKIND_PARTITIONED_INDEX) RelationInitIndexAccessInfo(relation); else if (RELKIND_HAS_TABLE_AM(relation->rd_rel->relkind) || relation->rd_rel->relkind == RELKIND_SEQUENCE) RelationInitTableAccessMethod(relation); else if (relation->rd_rel->relkind == RELKIND_PARTITIONED_TABLE) { /* * Do nothing: access methods are a setting that partitions can * inherit. */ } else Assert(relation->rd_rel->relam == InvalidOid); /* extract reloptions if any */ RelationParseRelOptions(relation, pg_class_tuple); /* * Fetch rules and triggers that affect this relation. * * Note that RelationBuildRuleLock() relies on this being done after * extracting the relation's reloptions. */ if (relation->rd_rel->relhasrules) RelationBuildRuleLock(relation); else { relation->rd_rules = NULL; relation->rd_rulescxt = NULL; } if (relation->rd_rel->relhastriggers) RelationBuildTriggers(relation); else relation->trigdesc = NULL; if (relation->rd_rel->relrowsecurity) RelationBuildRowSecurity(relation); else relation->rd_rsdesc = NULL; /* * initialize the relation lock manager information */ RelationInitLockInfo(relation); /* see lmgr.c */ /* * initialize physical addressing information for the relation */ RelationInitPhysicalAddr(relation); /* make sure relation is marked as having no open file yet */ relation->rd_smgr = NULL; /* * now we can free the memory allocated for pg_class_tuple */ heap_freetuple(pg_class_tuple); /* * If an invalidation arrived mid-build, start over. Between here and the * end of this function, don't add code that does or reasonably could read * system catalogs. That range must be free from invalidation processing * for the !insertIt case. For the insertIt case, RelationCacheInsert() * will enroll this relation in ordinary relcache invalidation processing, */ if (in_progress_list[in_progress_offset].invalidated) { RelationDestroyRelation(relation, false); goto retry; } Assert(in_progress_offset + 1 == in_progress_list_len); in_progress_list_len--; /* * Insert newly created relation into relcache hash table, if requested. * * There is one scenario in which we might find a hashtable entry already * present, even though our caller failed to find it: if the relation is a * system catalog or index that's used during relcache load, we might have * recursively created the same relcache entry during the preceding steps. * So allow RelationCacheInsert to delete any already-present relcache * entry for the same OID. The already-present entry should have refcount * zero (else somebody forgot to close it); in the event that it doesn't, * we'll elog a WARNING and leak the already-present entry. */ if (insertIt) RelationCacheInsert(relation, true); /* It's fully valid */ relation->rd_isvalid = true; #ifdef MAYBE_RECOVER_RELATION_BUILD_MEMORY if (tmpcxt) { /* Return to caller's context, and blow away the temporary context */ MemoryContextSwitchTo(oldcxt); MemoryContextDelete(tmpcxt); } #endif return relation; } /* * Initialize the physical addressing info (RelFileLocator) for a relcache entry * * Note: at the physical level, relations in the pg_global tablespace must * be treated as shared, even if relisshared isn't set. Hence we do not * look at relisshared here. */ static void RelationInitPhysicalAddr(Relation relation) { RelFileNumber oldnumber = relation->rd_locator.relNumber; /* these relations kinds never have storage */ if (!RELKIND_HAS_STORAGE(relation->rd_rel->relkind)) return; if (relation->rd_rel->reltablespace) relation->rd_locator.spcOid = relation->rd_rel->reltablespace; else relation->rd_locator.spcOid = MyDatabaseTableSpace; if (relation->rd_locator.spcOid == GLOBALTABLESPACE_OID) relation->rd_locator.dbOid = InvalidOid; else relation->rd_locator.dbOid = MyDatabaseId; if (relation->rd_rel->relfilenode) { /* * Even if we are using a decoding snapshot that doesn't represent the * current state of the catalog we need to make sure the filenode * points to the current file since the older file will be gone (or * truncated). The new file will still contain older rows so lookups * in them will work correctly. This wouldn't work correctly if * rewrites were allowed to change the schema in an incompatible way, * but those are prevented both on catalog tables and on user tables * declared as additional catalog tables. */ if (HistoricSnapshotActive() && RelationIsAccessibleInLogicalDecoding(relation) && IsTransactionState()) { HeapTuple phys_tuple; Form_pg_class physrel; phys_tuple = ScanPgRelation(RelationGetRelid(relation), RelationGetRelid(relation) != ClassOidIndexId, true); if (!HeapTupleIsValid(phys_tuple)) elog(ERROR, "could not find pg_class entry for %u", RelationGetRelid(relation)); physrel = (Form_pg_class) GETSTRUCT(phys_tuple); relation->rd_rel->reltablespace = physrel->reltablespace; relation->rd_rel->relfilenode = physrel->relfilenode; heap_freetuple(phys_tuple); } relation->rd_locator.relNumber = relation->rd_rel->relfilenode; } else { /* Consult the relation mapper */ relation->rd_locator.relNumber = RelationMapOidToFilenumber(relation->rd_id, relation->rd_rel->relisshared); if (!RelFileNumberIsValid(relation->rd_locator.relNumber)) elog(ERROR, "could not find relation mapping for relation \"%s\", OID %u", RelationGetRelationName(relation), relation->rd_id); } /* * For RelationNeedsWAL() to answer correctly on parallel workers, restore * rd_firstRelfilelocatorSubid. No subtransactions start or end while in * parallel mode, so the specific SubTransactionId does not matter. */ if (IsParallelWorker() && oldnumber != relation->rd_locator.relNumber) { if (RelFileLocatorSkippingWAL(relation->rd_locator)) relation->rd_firstRelfilelocatorSubid = TopSubTransactionId; else relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; } } /* * Fill in the IndexAmRoutine for an index relation. * * relation's rd_amhandler and rd_indexcxt must be valid already. */ static void InitIndexAmRoutine(Relation relation) { MemoryContext oldctx; /* * We formerly specified that the amhandler should return a palloc'd * struct. That's now deprecated in favor of returning a pointer to a * static struct, but to avoid completely breaking old external AMs, run * the amhandler in the relation's rd_indexcxt. */ oldctx = MemoryContextSwitchTo(relation->rd_indexcxt); relation->rd_indam = GetIndexAmRoutine(relation->rd_amhandler); MemoryContextSwitchTo(oldctx); } /* * Initialize index-access-method support data for an index relation */ void RelationInitIndexAccessInfo(Relation relation) { HeapTuple tuple; Form_pg_am aform; Datum indcollDatum; Datum indclassDatum; Datum indoptionDatum; bool isnull; oidvector *indcoll; oidvector *indclass; int2vector *indoption; MemoryContext indexcxt; MemoryContext oldcontext; int indnatts; int indnkeyatts; uint16 amsupport; /* * Make a copy of the pg_index entry for the index. Since pg_index * contains variable-length and possibly-null fields, we have to do this * honestly rather than just treating it as a Form_pg_index struct. */ tuple = SearchSysCache1(INDEXRELID, ObjectIdGetDatum(RelationGetRelid(relation))); if (!HeapTupleIsValid(tuple)) elog(ERROR, "cache lookup failed for index %u", RelationGetRelid(relation)); oldcontext = MemoryContextSwitchTo(CacheMemoryContext); relation->rd_indextuple = heap_copytuple(tuple); relation->rd_index = (Form_pg_index) GETSTRUCT(relation->rd_indextuple); MemoryContextSwitchTo(oldcontext); ReleaseSysCache(tuple); /* * Look up the index's access method, save the OID of its handler function */ Assert(relation->rd_rel->relam != InvalidOid); tuple = SearchSysCache1(AMOID, ObjectIdGetDatum(relation->rd_rel->relam)); if (!HeapTupleIsValid(tuple)) elog(ERROR, "cache lookup failed for access method %u", relation->rd_rel->relam); aform = (Form_pg_am) GETSTRUCT(tuple); relation->rd_amhandler = aform->amhandler; ReleaseSysCache(tuple); indnatts = RelationGetNumberOfAttributes(relation); if (indnatts != IndexRelationGetNumberOfAttributes(relation)) elog(ERROR, "relnatts disagrees with indnatts for index %u", RelationGetRelid(relation)); indnkeyatts = IndexRelationGetNumberOfKeyAttributes(relation); /* * Make the private context to hold index access info. The reason we need * a context, and not just a couple of pallocs, is so that we won't leak * any subsidiary info attached to fmgr lookup records. */ indexcxt = AllocSetContextCreate(CacheMemoryContext, "index info", ALLOCSET_SMALL_SIZES); relation->rd_indexcxt = indexcxt; MemoryContextCopyAndSetIdentifier(indexcxt, RelationGetRelationName(relation)); /* * Now we can fetch the index AM's API struct */ InitIndexAmRoutine(relation); /* * Allocate arrays to hold data. Opclasses are not used for included * columns, so allocate them for indnkeyatts only. */ relation->rd_opfamily = (Oid *) MemoryContextAllocZero(indexcxt, indnkeyatts * sizeof(Oid)); relation->rd_opcintype = (Oid *) MemoryContextAllocZero(indexcxt, indnkeyatts * sizeof(Oid)); amsupport = relation->rd_indam->amsupport; if (amsupport > 0) { int nsupport = indnatts * amsupport; relation->rd_support = (RegProcedure *) MemoryContextAllocZero(indexcxt, nsupport * sizeof(RegProcedure)); relation->rd_supportinfo = (FmgrInfo *) MemoryContextAllocZero(indexcxt, nsupport * sizeof(FmgrInfo)); } else { relation->rd_support = NULL; relation->rd_supportinfo = NULL; } relation->rd_indcollation = (Oid *) MemoryContextAllocZero(indexcxt, indnkeyatts * sizeof(Oid)); relation->rd_indoption = (int16 *) MemoryContextAllocZero(indexcxt, indnkeyatts * sizeof(int16)); /* * indcollation cannot be referenced directly through the C struct, * because it comes after the variable-width indkey field. Must extract * the datum the hard way... */ indcollDatum = fastgetattr(relation->rd_indextuple, Anum_pg_index_indcollation, GetPgIndexDescriptor(), &isnull); Assert(!isnull); indcoll = (oidvector *) DatumGetPointer(indcollDatum); memcpy(relation->rd_indcollation, indcoll->values, indnkeyatts * sizeof(Oid)); /* * indclass cannot be referenced directly through the C struct, because it * comes after the variable-width indkey field. Must extract the datum * the hard way... */ indclassDatum = fastgetattr(relation->rd_indextuple, Anum_pg_index_indclass, GetPgIndexDescriptor(), &isnull); Assert(!isnull); indclass = (oidvector *) DatumGetPointer(indclassDatum); /* * Fill the support procedure OID array, as well as the info about * opfamilies and opclass input types. (aminfo and supportinfo are left * as zeroes, and are filled on-the-fly when used) */ IndexSupportInitialize(indclass, relation->rd_support, relation->rd_opfamily, relation->rd_opcintype, amsupport, indnkeyatts); /* * Similarly extract indoption and copy it to the cache entry */ indoptionDatum = fastgetattr(relation->rd_indextuple, Anum_pg_index_indoption, GetPgIndexDescriptor(), &isnull); Assert(!isnull); indoption = (int2vector *) DatumGetPointer(indoptionDatum); memcpy(relation->rd_indoption, indoption->values, indnkeyatts * sizeof(int16)); (void) RelationGetIndexAttOptions(relation, false); /* * expressions, predicate, exclusion caches will be filled later */ relation->rd_indexprs = NIL; relation->rd_indpred = NIL; relation->rd_exclops = NULL; relation->rd_exclprocs = NULL; relation->rd_exclstrats = NULL; relation->rd_amcache = NULL; } /* * IndexSupportInitialize * Initializes an index's cached opclass information, * given the index's pg_index.indclass entry. * * Data is returned into *indexSupport, *opFamily, and *opcInType, * which are arrays allocated by the caller. * * The caller also passes maxSupportNumber and maxAttributeNumber, since these * indicate the size of the arrays it has allocated --- but in practice these * numbers must always match those obtainable from the system catalog entries * for the index and access method. */ static void IndexSupportInitialize(oidvector *indclass, RegProcedure *indexSupport, Oid *opFamily, Oid *opcInType, StrategyNumber maxSupportNumber, AttrNumber maxAttributeNumber) { int attIndex; for (attIndex = 0; attIndex < maxAttributeNumber; attIndex++) { OpClassCacheEnt *opcentry; if (!OidIsValid(indclass->values[attIndex])) elog(ERROR, "bogus pg_index tuple"); /* look up the info for this opclass, using a cache */ opcentry = LookupOpclassInfo(indclass->values[attIndex], maxSupportNumber); /* copy cached data into relcache entry */ opFamily[attIndex] = opcentry->opcfamily; opcInType[attIndex] = opcentry->opcintype; if (maxSupportNumber > 0) memcpy(&indexSupport[attIndex * maxSupportNumber], opcentry->supportProcs, maxSupportNumber * sizeof(RegProcedure)); } } /* * LookupOpclassInfo * * This routine maintains a per-opclass cache of the information needed * by IndexSupportInitialize(). This is more efficient than relying on * the catalog cache, because we can load all the info about a particular * opclass in a single indexscan of pg_amproc. * * The information from pg_am about expected range of support function * numbers is passed in, rather than being looked up, mainly because the * caller will have it already. * * Note there is no provision for flushing the cache. This is OK at the * moment because there is no way to ALTER any interesting properties of an * existing opclass --- all you can do is drop it, which will result in * a useless but harmless dead entry in the cache. To support altering * opclass membership (not the same as opfamily membership!), we'd need to * be able to flush this cache as well as the contents of relcache entries * for indexes. */ static OpClassCacheEnt * LookupOpclassInfo(Oid operatorClassOid, StrategyNumber numSupport) { OpClassCacheEnt *opcentry; bool found; Relation rel; SysScanDesc scan; ScanKeyData skey[3]; HeapTuple htup; bool indexOK; if (OpClassCache == NULL) { /* First time through: initialize the opclass cache */ HASHCTL ctl; /* Also make sure CacheMemoryContext exists */ if (!CacheMemoryContext) CreateCacheMemoryContext(); ctl.keysize = sizeof(Oid); ctl.entrysize = sizeof(OpClassCacheEnt); OpClassCache = hash_create("Operator class cache", 64, &ctl, HASH_ELEM | HASH_BLOBS); } opcentry = (OpClassCacheEnt *) hash_search(OpClassCache, &operatorClassOid, HASH_ENTER, &found); if (!found) { /* Initialize new entry */ opcentry->valid = false; /* until known OK */ opcentry->numSupport = numSupport; opcentry->supportProcs = NULL; /* filled below */ } else { Assert(numSupport == opcentry->numSupport); } /* * When aggressively testing cache-flush hazards, we disable the operator * class cache and force reloading of the info on each call. This models * no real-world behavior, since the cache entries are never invalidated * otherwise. However it can be helpful for detecting bugs in the cache * loading logic itself, such as reliance on a non-nailed index. Given * the limited use-case and the fact that this adds a great deal of * expense, we enable it only for high values of debug_discard_caches. */ #ifdef DISCARD_CACHES_ENABLED if (debug_discard_caches > 2) opcentry->valid = false; #endif if (opcentry->valid) return opcentry; /* * Need to fill in new entry. First allocate space, unless we already did * so in some previous attempt. */ if (opcentry->supportProcs == NULL && numSupport > 0) opcentry->supportProcs = (RegProcedure *) MemoryContextAllocZero(CacheMemoryContext, numSupport * sizeof(RegProcedure)); /* * To avoid infinite recursion during startup, force heap scans if we're * looking up info for the opclasses used by the indexes we would like to * reference here. */ indexOK = criticalRelcachesBuilt || (operatorClassOid != OID_BTREE_OPS_OID && operatorClassOid != INT2_BTREE_OPS_OID); /* * We have to fetch the pg_opclass row to determine its opfamily and * opcintype, which are needed to look up related operators and functions. * It'd be convenient to use the syscache here, but that probably doesn't * work while bootstrapping. */ ScanKeyInit(&skey[0], Anum_pg_opclass_oid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(operatorClassOid)); rel = table_open(OperatorClassRelationId, AccessShareLock); scan = systable_beginscan(rel, OpclassOidIndexId, indexOK, NULL, 1, skey); if (HeapTupleIsValid(htup = systable_getnext(scan))) { Form_pg_opclass opclassform = (Form_pg_opclass) GETSTRUCT(htup); opcentry->opcfamily = opclassform->opcfamily; opcentry->opcintype = opclassform->opcintype; } else elog(ERROR, "could not find tuple for opclass %u", operatorClassOid); systable_endscan(scan); table_close(rel, AccessShareLock); /* * Scan pg_amproc to obtain support procs for the opclass. We only fetch * the default ones (those with lefttype = righttype = opcintype). */ if (numSupport > 0) { ScanKeyInit(&skey[0], Anum_pg_amproc_amprocfamily, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(opcentry->opcfamily)); ScanKeyInit(&skey[1], Anum_pg_amproc_amproclefttype, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(opcentry->opcintype)); ScanKeyInit(&skey[2], Anum_pg_amproc_amprocrighttype, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(opcentry->opcintype)); rel = table_open(AccessMethodProcedureRelationId, AccessShareLock); scan = systable_beginscan(rel, AccessMethodProcedureIndexId, indexOK, NULL, 3, skey); while (HeapTupleIsValid(htup = systable_getnext(scan))) { Form_pg_amproc amprocform = (Form_pg_amproc) GETSTRUCT(htup); if (amprocform->amprocnum <= 0 || (StrategyNumber) amprocform->amprocnum > numSupport) elog(ERROR, "invalid amproc number %d for opclass %u", amprocform->amprocnum, operatorClassOid); opcentry->supportProcs[amprocform->amprocnum - 1] = amprocform->amproc; } systable_endscan(scan); table_close(rel, AccessShareLock); } opcentry->valid = true; return opcentry; } /* * Fill in the TableAmRoutine for a relation * * relation's rd_amhandler must be valid already. */ static void InitTableAmRoutine(Relation relation) { relation->rd_tableam = GetTableAmRoutine(relation->rd_amhandler); } /* * Initialize table access method support for a table like relation */ void RelationInitTableAccessMethod(Relation relation) { HeapTuple tuple; Form_pg_am aform; if (relation->rd_rel->relkind == RELKIND_SEQUENCE) { /* * Sequences are currently accessed like heap tables, but it doesn't * seem prudent to show that in the catalog. So just overwrite it * here. */ Assert(relation->rd_rel->relam == InvalidOid); relation->rd_amhandler = F_HEAP_TABLEAM_HANDLER; } else if (IsCatalogRelation(relation)) { /* * Avoid doing a syscache lookup for catalog tables. */ Assert(relation->rd_rel->relam == HEAP_TABLE_AM_OID); relation->rd_amhandler = F_HEAP_TABLEAM_HANDLER; } else { /* * Look up the table access method, save the OID of its handler * function. */ Assert(relation->rd_rel->relam != InvalidOid); tuple = SearchSysCache1(AMOID, ObjectIdGetDatum(relation->rd_rel->relam)); if (!HeapTupleIsValid(tuple)) elog(ERROR, "cache lookup failed for access method %u", relation->rd_rel->relam); aform = (Form_pg_am) GETSTRUCT(tuple); relation->rd_amhandler = aform->amhandler; ReleaseSysCache(tuple); } /* * Now we can fetch the table AM's API struct */ InitTableAmRoutine(relation); } /* * formrdesc * * This is a special cut-down version of RelationBuildDesc(), * used while initializing the relcache. * The relation descriptor is built just from the supplied parameters, * without actually looking at any system table entries. We cheat * quite a lot since we only need to work for a few basic system * catalogs. * * The catalogs this is used for can't have constraints (except attnotnull), * default values, rules, or triggers, since we don't cope with any of that. * (Well, actually, this only matters for properties that need to be valid * during bootstrap or before RelationCacheInitializePhase3 runs, and none of * these properties matter then...) * * NOTE: we assume we are already switched into CacheMemoryContext. */ static void formrdesc(const char *relationName, Oid relationReltype, bool isshared, int natts, const FormData_pg_attribute *attrs) { Relation relation; int i; bool has_not_null; /* * allocate new relation desc, clear all fields of reldesc */ relation = palloc0_object(RelationData); /* make sure relation is marked as having no open file yet */ relation->rd_smgr = NULL; /* * initialize reference count: 1 because it is nailed in cache */ relation->rd_refcnt = 1; /* * all entries built with this routine are nailed-in-cache; none are for * new or temp relations. */ relation->rd_isnailed = true; relation->rd_createSubid = InvalidSubTransactionId; relation->rd_newRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_droppedSubid = InvalidSubTransactionId; relation->rd_backend = INVALID_PROC_NUMBER; relation->rd_islocaltemp = false; /* * initialize relation tuple form * * The data we insert here is pretty incomplete/bogus, but it'll serve to * get us launched. RelationCacheInitializePhase3() will read the real * data from pg_class and replace what we've done here. Note in * particular that relowner is left as zero; this cues * RelationCacheInitializePhase3 that the real data isn't there yet. */ relation->rd_rel = (Form_pg_class) palloc0(CLASS_TUPLE_SIZE); namestrcpy(&relation->rd_rel->relname, relationName); relation->rd_rel->relnamespace = PG_CATALOG_NAMESPACE; relation->rd_rel->reltype = relationReltype; /* * It's important to distinguish between shared and non-shared relations, * even at bootstrap time, to make sure we know where they are stored. */ relation->rd_rel->relisshared = isshared; if (isshared) relation->rd_rel->reltablespace = GLOBALTABLESPACE_OID; /* formrdesc is used only for permanent relations */ relation->rd_rel->relpersistence = RELPERSISTENCE_PERMANENT; /* ... and they're always populated, too */ relation->rd_rel->relispopulated = true; relation->rd_rel->relreplident = REPLICA_IDENTITY_NOTHING; relation->rd_rel->relpages = 0; relation->rd_rel->reltuples = -1; relation->rd_rel->relallvisible = 0; relation->rd_rel->relallfrozen = 0; relation->rd_rel->relkind = RELKIND_RELATION; relation->rd_rel->relnatts = (int16) natts; /* * initialize attribute tuple form * * Unlike the case with the relation tuple, this data had better be right * because it will never be replaced. The data comes from * src/include/catalog/ headers via genbki.pl. */ relation->rd_att = CreateTemplateTupleDesc(natts); relation->rd_att->tdrefcount = 1; /* mark as refcounted */ relation->rd_att->tdtypeid = relationReltype; relation->rd_att->tdtypmod = -1; /* just to be sure */ /* * initialize tuple desc info */ has_not_null = false; for (i = 0; i < natts; i++) { memcpy(TupleDescAttr(relation->rd_att, i), &attrs[i], ATTRIBUTE_FIXED_PART_SIZE); has_not_null |= attrs[i].attnotnull; populate_compact_attribute(relation->rd_att, i); } TupleDescFinalize(relation->rd_att); /* mark not-null status */ if (has_not_null) { TupleConstr *constr = palloc0_object(TupleConstr); constr->has_not_null = true; relation->rd_att->constr = constr; } /* * initialize relation id from info in att array (my, this is ugly) */ RelationGetRelid(relation) = TupleDescAttr(relation->rd_att, 0)->attrelid; /* * All relations made with formrdesc are mapped. This is necessarily so * because there is no other way to know what filenumber they currently * have. In bootstrap mode, add them to the initial relation mapper data, * specifying that the initial filenumber is the same as the OID. */ relation->rd_rel->relfilenode = InvalidRelFileNumber; if (IsBootstrapProcessingMode()) RelationMapUpdateMap(RelationGetRelid(relation), RelationGetRelid(relation), isshared, true); /* * initialize the relation lock manager information */ RelationInitLockInfo(relation); /* see lmgr.c */ /* * initialize physical addressing information for the relation */ RelationInitPhysicalAddr(relation); /* * initialize the table am handler */ relation->rd_rel->relam = HEAP_TABLE_AM_OID; relation->rd_tableam = GetHeapamTableAmRoutine(); /* * initialize the rel-has-index flag, using hardwired knowledge */ if (IsBootstrapProcessingMode()) { /* In bootstrap mode, we have no indexes */ relation->rd_rel->relhasindex = false; } else { /* Otherwise, all the rels formrdesc is used for have indexes */ relation->rd_rel->relhasindex = true; } /* * add new reldesc to relcache */ RelationCacheInsert(relation, false); /* It's fully valid */ relation->rd_isvalid = true; } #ifdef USE_ASSERT_CHECKING /* * AssertCouldGetRelation * * Check safety of calling RelationIdGetRelation(). * * In code that reads catalogs in the event of a cache miss, call this * before checking the cache. */ void AssertCouldGetRelation(void) { Assert(IsTransactionState()); AssertBufferLocksPermitCatalogRead(); } #endif /* ---------------------------------------------------------------- * Relation Descriptor Lookup Interface * ---------------------------------------------------------------- */ /* * RelationIdGetRelation * * Lookup a reldesc by OID; make one if not already in cache. * * Returns NULL if no pg_class row could be found for the given relid * (suggesting we are trying to access a just-deleted relation). * Any other error is reported via elog. * * NB: caller should already have at least AccessShareLock on the * relation ID, else there are nasty race conditions. * * NB: relation ref count is incremented, or set to 1 if new entry. * Caller should eventually decrement count. (Usually, * that happens by calling RelationClose().) */ Relation RelationIdGetRelation(Oid relationId) { Relation rd; AssertCouldGetRelation(); /* * first try to find reldesc in the cache */ RelationIdCacheLookup(relationId, rd); if (RelationIsValid(rd)) { /* return NULL for dropped relations */ if (rd->rd_droppedSubid != InvalidSubTransactionId) { Assert(!rd->rd_isvalid); return NULL; } RelationIncrementReferenceCount(rd); /* revalidate cache entry if necessary */ if (!rd->rd_isvalid) { RelationRebuildRelation(rd); /* * Normally entries need to be valid here, but before the relcache * has been initialized, not enough infrastructure exists to * perform pg_class lookups. The structure of such entries doesn't * change, but we still want to update the rd_rel entry. So * rd_isvalid = false is left in place for a later lookup. */ Assert(rd->rd_isvalid || (rd->rd_isnailed && !criticalRelcachesBuilt)); } return rd; } /* * no reldesc in the cache, so have RelationBuildDesc() build one and add * it. */ rd = RelationBuildDesc(relationId, true); if (RelationIsValid(rd)) RelationIncrementReferenceCount(rd); return rd; } /* * Returns a schema-qualified name of the relation. */ char * RelationGetQualifiedRelationName(Relation rel) { return get_qualified_objname(RelationGetNamespace(rel), RelationGetRelationName(rel)); } /* ---------------------------------------------------------------- * cache invalidation support routines * ---------------------------------------------------------------- */ /* ResourceOwner callbacks to track relcache references */ static void ResOwnerReleaseRelation(Datum res); static char *ResOwnerPrintRelCache(Datum res); static const ResourceOwnerDesc relref_resowner_desc = { .name = "relcache reference", .release_phase = RESOURCE_RELEASE_BEFORE_LOCKS, .release_priority = RELEASE_PRIO_RELCACHE_REFS, .ReleaseResource = ResOwnerReleaseRelation, .DebugPrint = ResOwnerPrintRelCache }; /* Convenience wrappers over ResourceOwnerRemember/Forget */ static inline void ResourceOwnerRememberRelationRef(ResourceOwner owner, Relation rel) { ResourceOwnerRemember(owner, PointerGetDatum(rel), &relref_resowner_desc); } static inline void ResourceOwnerForgetRelationRef(ResourceOwner owner, Relation rel) { ResourceOwnerForget(owner, PointerGetDatum(rel), &relref_resowner_desc); } /* * RelationIncrementReferenceCount * Increments relation reference count. * * Note: bootstrap mode has its own weird ideas about relation refcount * behavior; we ought to fix it someday, but for now, just disable * reference count ownership tracking in bootstrap mode. */ void RelationIncrementReferenceCount(Relation rel) { ResourceOwnerEnlarge(CurrentResourceOwner); rel->rd_refcnt += 1; if (!IsBootstrapProcessingMode()) ResourceOwnerRememberRelationRef(CurrentResourceOwner, rel); } /* * RelationDecrementReferenceCount * Decrements relation reference count. */ void RelationDecrementReferenceCount(Relation rel) { Assert(rel->rd_refcnt > 0); rel->rd_refcnt -= 1; if (!IsBootstrapProcessingMode()) ResourceOwnerForgetRelationRef(CurrentResourceOwner, rel); } /* * RelationClose - close an open relation * * Actually, we just decrement the refcount. * * NOTE: if compiled with -DRELCACHE_FORCE_RELEASE then relcache entries * will be freed as soon as their refcount goes to zero. In combination * with aset.c's CLOBBER_FREED_MEMORY option, this provides a good test * to catch references to already-released relcache entries. It slows * things down quite a bit, however. */ void RelationClose(Relation relation) { /* Note: no locking manipulations needed */ RelationDecrementReferenceCount(relation); RelationCloseCleanup(relation); } static void RelationCloseCleanup(Relation relation) { /* * If the relation is no longer open in this session, we can clean up any * stale partition descriptors it has. This is unlikely, so check to see * if there are child contexts before expending a call to mcxt.c. */ if (RelationHasReferenceCountZero(relation)) { if (relation->rd_pdcxt != NULL && relation->rd_pdcxt->firstchild != NULL) MemoryContextDeleteChildren(relation->rd_pdcxt); if (relation->rd_pddcxt != NULL && relation->rd_pddcxt->firstchild != NULL) MemoryContextDeleteChildren(relation->rd_pddcxt); } #ifdef RELCACHE_FORCE_RELEASE if (RelationHasReferenceCountZero(relation) && relation->rd_createSubid == InvalidSubTransactionId && relation->rd_firstRelfilelocatorSubid == InvalidSubTransactionId) RelationClearRelation(relation); #endif } /* * RelationReloadIndexInfo - reload minimal information for an open index * * This function is used only for indexes. A relcache inval on an index * can mean that its pg_class or pg_index row changed. There are only * very limited changes that are allowed to an existing index's schema, * so we can update the relcache entry without a complete rebuild; which * is fortunate because we can't rebuild an index entry that is "nailed" * and/or in active use. We support full replacement of the pg_class row, * as well as updates of a few simple fields of the pg_index row. * * We assume that at the time we are called, we have at least AccessShareLock * on the target index. * * If the target index is an index on pg_class or pg_index, we'd better have * previously gotten at least AccessShareLock on its underlying catalog, * else we are at risk of deadlock against someone trying to exclusive-lock * the heap and index in that order. This is ensured in current usage by * only applying this to indexes being opened or having positive refcount. */ static void RelationReloadIndexInfo(Relation relation) { bool indexOK; HeapTuple pg_class_tuple; Form_pg_class relp; /* Should be called only for invalidated, live indexes */ Assert((relation->rd_rel->relkind == RELKIND_INDEX || relation->rd_rel->relkind == RELKIND_PARTITIONED_INDEX) && !relation->rd_isvalid && relation->rd_droppedSubid == InvalidSubTransactionId); /* * If it's a shared index, we might be called before backend startup has * finished selecting a database, in which case we have no way to read * pg_class yet. However, a shared index can never have any significant * schema updates, so it's okay to mostly ignore the invalidation signal. * Its physical relfilenumber might've changed, but that's all. Update * the physical relfilenumber, mark it valid and return without doing * anything more. */ if (relation->rd_rel->relisshared && !criticalRelcachesBuilt) { RelationInitPhysicalAddr(relation); relation->rd_isvalid = true; return; } /* * Read the pg_class row * * Don't try to use an indexscan of pg_class_oid_index to reload the info * for pg_class_oid_index ... */ indexOK = (RelationGetRelid(relation) != ClassOidIndexId); pg_class_tuple = ScanPgRelation(RelationGetRelid(relation), indexOK, false); if (!HeapTupleIsValid(pg_class_tuple)) elog(ERROR, "could not find pg_class tuple for index %u", RelationGetRelid(relation)); relp = (Form_pg_class) GETSTRUCT(pg_class_tuple); memcpy(relation->rd_rel, relp, CLASS_TUPLE_SIZE); /* Reload reloptions in case they changed */ if (relation->rd_options) pfree(relation->rd_options); RelationParseRelOptions(relation, pg_class_tuple); /* done with pg_class tuple */ heap_freetuple(pg_class_tuple); /* We must recalculate physical address in case it changed */ RelationInitPhysicalAddr(relation); /* * For a non-system index, there are fields of the pg_index row that are * allowed to change, so re-read that row and update the relcache entry. * Most of the info derived from pg_index (such as support function lookup * info) cannot change, and indeed the whole point of this routine is to * update the relcache entry without clobbering that data; so wholesale * replacement is not appropriate. */ if (!IsSystemRelation(relation)) { HeapTuple tuple; Form_pg_index index; tuple = SearchSysCache1(INDEXRELID, ObjectIdGetDatum(RelationGetRelid(relation))); if (!HeapTupleIsValid(tuple)) elog(ERROR, "cache lookup failed for index %u", RelationGetRelid(relation)); index = (Form_pg_index) GETSTRUCT(tuple); /* * Basically, let's just copy all the bool fields. There are one or * two of these that can't actually change in the current code, but * it's not worth it to track exactly which ones they are. None of * the array fields are allowed to change, though. */ relation->rd_index->indisunique = index->indisunique; relation->rd_index->indnullsnotdistinct = index->indnullsnotdistinct; relation->rd_index->indisprimary = index->indisprimary; relation->rd_index->indisexclusion = index->indisexclusion; relation->rd_index->indimmediate = index->indimmediate; relation->rd_index->indisclustered = index->indisclustered; relation->rd_index->indisvalid = index->indisvalid; relation->rd_index->indcheckxmin = index->indcheckxmin; relation->rd_index->indisready = index->indisready; relation->rd_index->indislive = index->indislive; relation->rd_index->indisreplident = index->indisreplident; /* Copy xmin too, as that is needed to make sense of indcheckxmin */ HeapTupleHeaderSetXmin(relation->rd_indextuple->t_data, HeapTupleHeaderGetXmin(tuple->t_data)); ReleaseSysCache(tuple); } /* Okay, now it's valid again */ relation->rd_isvalid = true; } /* * RelationReloadNailed - reload minimal information for nailed relations. * * The structure of a nailed relation can never change (which is good, because * we rely on knowing their structure to be able to read catalog content). But * some parts, e.g. pg_class.relfrozenxid, are still important to have * accurate content for. Therefore those need to be reloaded after the arrival * of invalidations. */ static void RelationReloadNailed(Relation relation) { /* Should be called only for invalidated, nailed relations */ Assert(!relation->rd_isvalid); Assert(relation->rd_isnailed); /* nailed indexes are handled by RelationReloadIndexInfo() */ Assert(relation->rd_rel->relkind == RELKIND_RELATION); AssertCouldGetRelation(); /* * Redo RelationInitPhysicalAddr in case it is a mapped relation whose * mapping changed. */ RelationInitPhysicalAddr(relation); /* * Reload a non-index entry. We can't easily do so if relcaches aren't * yet built, but that's fine because at that stage the attributes that * need to be current (like relfrozenxid) aren't yet accessed. To ensure * the entry will later be revalidated, we leave it in invalid state, but * allow use (cf. RelationIdGetRelation()). */ if (criticalRelcachesBuilt) { HeapTuple pg_class_tuple; Form_pg_class relp; /* * NB: Mark the entry as valid before starting to scan, to avoid * self-recursion when re-building pg_class. */ relation->rd_isvalid = true; pg_class_tuple = ScanPgRelation(RelationGetRelid(relation), true, false); relp = (Form_pg_class) GETSTRUCT(pg_class_tuple); memcpy(relation->rd_rel, relp, CLASS_TUPLE_SIZE); heap_freetuple(pg_class_tuple); /* * Again mark as valid, to protect against concurrently arriving * invalidations. */ relation->rd_isvalid = true; } } /* * RelationDestroyRelation * * Physically delete a relation cache entry and all subsidiary data. * Caller must already have unhooked the entry from the hash table. */ static void RelationDestroyRelation(Relation relation, bool remember_tupdesc) { Assert(RelationHasReferenceCountZero(relation)); /* * Make sure smgr and lower levels close the relation's files, if they * weren't closed already. (This was probably done by caller, but let's * just be real sure.) */ RelationCloseSmgr(relation); /* break mutual link with stats entry */ pgstat_unlink_relation(relation); /* * Free all the subsidiary data structures of the relcache entry, then the * entry itself. */ if (relation->rd_rel) pfree(relation->rd_rel); /* can't use DecrTupleDescRefCount here */ Assert(relation->rd_att->tdrefcount > 0); if (--relation->rd_att->tdrefcount == 0) { /* * If we Rebuilt a relcache entry during a transaction then its * possible we did that because the TupDesc changed as the result of * an ALTER TABLE that ran at less than AccessExclusiveLock. It's * possible someone copied that TupDesc, in which case the copy would * point to free'd memory. So if we rebuild an entry we keep the * TupDesc around until end of transaction, to be safe. */ if (remember_tupdesc) RememberToFreeTupleDescAtEOX(relation->rd_att); else FreeTupleDesc(relation->rd_att); } FreeTriggerDesc(relation->trigdesc); list_free_deep(relation->rd_fkeylist); list_free(relation->rd_indexlist); list_free(relation->rd_statlist); bms_free(relation->rd_keyattr); bms_free(relation->rd_pkattr); bms_free(relation->rd_idattr); bms_free(relation->rd_hotblockingattr); bms_free(relation->rd_summarizedattr); if (relation->rd_pubdesc) pfree(relation->rd_pubdesc); if (relation->rd_options) pfree(relation->rd_options); if (relation->rd_indextuple) pfree(relation->rd_indextuple); if (relation->rd_amcache) pfree(relation->rd_amcache); if (relation->rd_fdwroutine) pfree(relation->rd_fdwroutine); if (relation->rd_indexcxt) MemoryContextDelete(relation->rd_indexcxt); if (relation->rd_rulescxt) MemoryContextDelete(relation->rd_rulescxt); if (relation->rd_rsdesc) MemoryContextDelete(relation->rd_rsdesc->rscxt); if (relation->rd_partkeycxt) MemoryContextDelete(relation->rd_partkeycxt); if (relation->rd_pdcxt) MemoryContextDelete(relation->rd_pdcxt); if (relation->rd_pddcxt) MemoryContextDelete(relation->rd_pddcxt); if (relation->rd_partcheckcxt) MemoryContextDelete(relation->rd_partcheckcxt); pfree(relation); } /* * RelationInvalidateRelation - mark a relation cache entry as invalid * * An entry that's marked as invalid will be reloaded on next access. */ static void RelationInvalidateRelation(Relation relation) { /* * Make sure smgr and lower levels close the relation's files, if they * weren't closed already. If the relation is not getting deleted, the * next smgr access should reopen the files automatically. This ensures * that the low-level file access state is updated after, say, a vacuum * truncation. */ RelationCloseSmgr(relation); /* Free AM cached data, if any */ if (relation->rd_amcache) pfree(relation->rd_amcache); relation->rd_amcache = NULL; relation->rd_isvalid = false; } /* * RelationClearRelation - physically blow away a relation cache entry * * The caller must ensure that the entry is no longer needed, i.e. its * reference count is zero. Also, the rel or its storage must not be created * in the current transaction (rd_createSubid and rd_firstRelfilelocatorSubid * must not be set). */ static void RelationClearRelation(Relation relation) { Assert(RelationHasReferenceCountZero(relation)); Assert(!relation->rd_isnailed); /* * Relations created in the same transaction must never be removed, see * RelationFlushRelation. */ Assert(relation->rd_createSubid == InvalidSubTransactionId); Assert(relation->rd_firstRelfilelocatorSubid == InvalidSubTransactionId); Assert(relation->rd_droppedSubid == InvalidSubTransactionId); /* first mark it as invalid */ RelationInvalidateRelation(relation); /* Remove it from the hash table */ RelationCacheDelete(relation); /* And release storage */ RelationDestroyRelation(relation, false); } /* * RelationRebuildRelation - rebuild a relation cache entry in place * * Reset and rebuild a relation cache entry from scratch (that is, from * catalog entries). This is used when we are notified of a change to an open * relation (one with refcount > 0). The entry is reconstructed without * moving the physical RelationData record, so that the refcount holder's * pointer is still valid. * * NB: when rebuilding, we'd better hold some lock on the relation, else the * catalog data we need to read could be changing under us. Also, a rel to be * rebuilt had better have refcnt > 0. This is because a sinval reset could * happen while we're accessing the catalogs, and the rel would get blown away * underneath us by RelationCacheInvalidate if it has zero refcnt. */ static void RelationRebuildRelation(Relation relation) { Assert(!RelationHasReferenceCountZero(relation)); AssertCouldGetRelation(); /* there is no reason to ever rebuild a dropped relation */ Assert(relation->rd_droppedSubid == InvalidSubTransactionId); /* Close and mark it as invalid until we've finished the rebuild */ RelationInvalidateRelation(relation); /* * Indexes only have a limited number of possible schema changes, and we * don't want to use the full-blown procedure because it's a headache for * indexes that reload itself depends on. * * As an exception, use the full procedure if the index access info hasn't * been initialized yet. Index creation relies on that: it first builds * the relcache entry with RelationBuildLocalRelation(), creates the * pg_index tuple only after that, and then relies on * CommandCounterIncrement to load the pg_index contents. */ if ((relation->rd_rel->relkind == RELKIND_INDEX || relation->rd_rel->relkind == RELKIND_PARTITIONED_INDEX) && relation->rd_indexcxt != NULL) { RelationReloadIndexInfo(relation); return; } /* Nailed relations are handled separately. */ else if (relation->rd_isnailed) { RelationReloadNailed(relation); return; } else { /* * Our strategy for rebuilding an open relcache entry is to build a * new entry from scratch, swap its contents with the old entry, and * finally delete the new entry (along with any infrastructure swapped * over from the old entry). This is to avoid trouble in case an * error causes us to lose control partway through. The old entry * will still be marked !rd_isvalid, so we'll try to rebuild it again * on next access. Meanwhile it's not any less valid than it was * before, so any code that might expect to continue accessing it * isn't hurt by the rebuild failure. (Consider for example a * subtransaction that ALTERs a table and then gets canceled partway * through the cache entry rebuild. The outer transaction should * still see the not-modified cache entry as valid.) The worst * consequence of an error is leaking the necessarily-unreferenced new * entry, and this shouldn't happen often enough for that to be a big * problem. * * When rebuilding an open relcache entry, we must preserve ref count, * rd_*Subid, and rd_toastoid state. Also attempt to preserve the * pg_class entry (rd_rel), tupledesc, rewrite-rule, partition key, * and partition descriptor substructures in place, because various * places assume that these structures won't move while they are * working with an open relcache entry. (Note: the refcount * mechanism for tupledescs might someday allow us to remove this hack * for the tupledesc.) * * Note that this process does not touch CurrentResourceOwner; which * is good because whatever ref counts the entry may have do not * necessarily belong to that resource owner. */ Relation newrel; Oid save_relid = RelationGetRelid(relation); bool keep_tupdesc; bool keep_rules; bool keep_policies; bool keep_partkey; /* Build temporary entry, but don't link it into hashtable */ newrel = RelationBuildDesc(save_relid, false); /* * Between here and the end of the swap, don't add code that does or * reasonably could read system catalogs. That range must be free * from invalidation processing. See RelationBuildDesc() manipulation * of in_progress_list. */ if (newrel == NULL) { /* * We can validly get here, if we're using a historic snapshot in * which a relation, accessed from outside logical decoding, is * still invisible. In that case it's fine to just mark the * relation as invalid and return - it'll fully get reloaded by * the cache reset at the end of logical decoding (or at the next * access). During normal processing we don't want to ignore this * case as it shouldn't happen there, as explained below. */ if (HistoricSnapshotActive()) return; /* * This shouldn't happen as dropping a relation is intended to be * impossible if still referenced (cf. CheckTableNotInUse()). But * if we get here anyway, we can't just delete the relcache entry, * as it possibly could get accessed later (as e.g. the error * might get trapped and handled via a subtransaction rollback). */ elog(ERROR, "relation %u deleted while still in use", save_relid); } /* * If we were to, again, have cases of the relkind of a relcache entry * changing, we would need to ensure that pgstats does not get * confused. */ Assert(relation->rd_rel->relkind == newrel->rd_rel->relkind); keep_tupdesc = equalTupleDescs(relation->rd_att, newrel->rd_att); keep_rules = equalRuleLocks(relation->rd_rules, newrel->rd_rules); keep_policies = equalRSDesc(relation->rd_rsdesc, newrel->rd_rsdesc); /* partkey is immutable once set up, so we can always keep it */ keep_partkey = (relation->rd_partkey != NULL); /* * Perform swapping of the relcache entry contents. Within this * process the old entry is momentarily invalid, so there *must* be no * possibility of CHECK_FOR_INTERRUPTS within this sequence. Do it in * all-in-line code for safety. * * Since the vast majority of fields should be swapped, our method is * to swap the whole structures and then re-swap those few fields we * didn't want swapped. */ #define SWAPFIELD(fldtype, fldname) \ do { \ fldtype _tmp = newrel->fldname; \ newrel->fldname = relation->fldname; \ relation->fldname = _tmp; \ } while (0) /* swap all Relation struct fields */ { RelationData tmpstruct; memcpy(&tmpstruct, newrel, sizeof(RelationData)); memcpy(newrel, relation, sizeof(RelationData)); memcpy(relation, &tmpstruct, sizeof(RelationData)); } /* rd_smgr must not be swapped, due to back-links from smgr level */ SWAPFIELD(SMgrRelation, rd_smgr); /* rd_refcnt must be preserved */ SWAPFIELD(int, rd_refcnt); /* isnailed shouldn't change */ Assert(newrel->rd_isnailed == relation->rd_isnailed); /* creation sub-XIDs must be preserved */ SWAPFIELD(SubTransactionId, rd_createSubid); SWAPFIELD(SubTransactionId, rd_newRelfilelocatorSubid); SWAPFIELD(SubTransactionId, rd_firstRelfilelocatorSubid); SWAPFIELD(SubTransactionId, rd_droppedSubid); /* un-swap rd_rel pointers, swap contents instead */ SWAPFIELD(Form_pg_class, rd_rel); /* ... but actually, we don't have to update newrel->rd_rel */ memcpy(relation->rd_rel, newrel->rd_rel, CLASS_TUPLE_SIZE); /* preserve old tupledesc, rules, policies if no logical change */ if (keep_tupdesc) SWAPFIELD(TupleDesc, rd_att); if (keep_rules) { SWAPFIELD(RuleLock *, rd_rules); SWAPFIELD(MemoryContext, rd_rulescxt); } if (keep_policies) SWAPFIELD(RowSecurityDesc *, rd_rsdesc); /* toast OID override must be preserved */ SWAPFIELD(Oid, rd_toastoid); /* pgstat_info / enabled must be preserved */ SWAPFIELD(struct PgStat_TableStatus *, pgstat_info); SWAPFIELD(bool, pgstat_enabled); /* preserve old partition key if we have one */ if (keep_partkey) { SWAPFIELD(PartitionKey, rd_partkey); SWAPFIELD(MemoryContext, rd_partkeycxt); } if (newrel->rd_pdcxt != NULL || newrel->rd_pddcxt != NULL) { /* * We are rebuilding a partitioned relation with a non-zero * reference count, so we must keep the old partition descriptor * around, in case there's a PartitionDirectory with a pointer to * it. This means we can't free the old rd_pdcxt yet. (This is * necessary because RelationGetPartitionDesc hands out direct * pointers to the relcache's data structure, unlike our usual * practice which is to hand out copies. We'd have the same * problem with rd_partkey, except that we always preserve that * once created.) * * To ensure that it's not leaked completely, re-attach it to the * new reldesc, or make it a child of the new reldesc's rd_pdcxt * in the unlikely event that there is one already. (Compare hack * in RelationBuildPartitionDesc.) RelationClose will clean up * any such contexts once the reference count reaches zero. * * In the case where the reference count is zero, this code is not * reached, which should be OK because in that case there should * be no PartitionDirectory with a pointer to the old entry. * * Note that newrel and relation have already been swapped, so the * "old" partition descriptor is actually the one hanging off of * newrel. */ relation->rd_partdesc = NULL; /* ensure rd_partdesc is invalid */ relation->rd_partdesc_nodetached = NULL; relation->rd_partdesc_nodetached_xmin = InvalidTransactionId; if (relation->rd_pdcxt != NULL) /* probably never happens */ MemoryContextSetParent(newrel->rd_pdcxt, relation->rd_pdcxt); else relation->rd_pdcxt = newrel->rd_pdcxt; if (relation->rd_pddcxt != NULL) MemoryContextSetParent(newrel->rd_pddcxt, relation->rd_pddcxt); else relation->rd_pddcxt = newrel->rd_pddcxt; /* drop newrel's pointers so we don't destroy it below */ newrel->rd_partdesc = NULL; newrel->rd_partdesc_nodetached = NULL; newrel->rd_partdesc_nodetached_xmin = InvalidTransactionId; newrel->rd_pdcxt = NULL; newrel->rd_pddcxt = NULL; } #undef SWAPFIELD /* And now we can throw away the temporary entry */ RelationDestroyRelation(newrel, !keep_tupdesc); } } /* * RelationFlushRelation * * Rebuild the relation if it is open (refcount > 0), else blow it away. * This is used when we receive a cache invalidation event for the rel. */ static void RelationFlushRelation(Relation relation) { if (relation->rd_createSubid != InvalidSubTransactionId || relation->rd_firstRelfilelocatorSubid != InvalidSubTransactionId) { /* * New relcache entries are always rebuilt, not flushed; else we'd * forget the "new" status of the relation. Ditto for the * new-relfilenumber status. */ if (IsTransactionState() && relation->rd_droppedSubid == InvalidSubTransactionId) { /* * The rel could have zero refcnt here, so temporarily increment * the refcnt to ensure it's safe to rebuild it. We can assume * that the current transaction has some lock on the rel already. */ RelationIncrementReferenceCount(relation); RelationRebuildRelation(relation); RelationDecrementReferenceCount(relation); } else RelationInvalidateRelation(relation); } else { /* * Pre-existing rels can be dropped from the relcache if not open. * * If the entry is in use, rebuild it if possible. If we're not * inside a valid transaction, we can't do any catalog access so it's * not possible to rebuild yet. Just mark it as invalid in that case, * so that the rebuild will occur when the entry is next opened. * * Note: it's possible that we come here during subtransaction abort, * and the reason for wanting to rebuild is that the rel is open in * the outer transaction. In that case it might seem unsafe to not * rebuild immediately, since whatever code has the rel already open * will keep on using the relcache entry as-is. However, in such a * case the outer transaction should be holding a lock that's * sufficient to prevent any significant change in the rel's schema, * so the existing entry contents should be good enough for its * purposes; at worst we might be behind on statistics updates or the * like. (See also CheckTableNotInUse() and its callers.) */ if (RelationHasReferenceCountZero(relation)) RelationClearRelation(relation); else if (!IsTransactionState()) RelationInvalidateRelation(relation); else if (relation->rd_isnailed && relation->rd_refcnt == 1) { /* * A nailed relation with refcnt == 1 is unused. We cannot clear * it, but there's also no need no need to rebuild it immediately. */ RelationInvalidateRelation(relation); } else RelationRebuildRelation(relation); } } /* * RelationForgetRelation - caller reports that it dropped the relation */ void RelationForgetRelation(Oid rid) { Relation relation; RelationIdCacheLookup(rid, relation); if (!relation) return; /* not in cache, nothing to do */ if (!RelationHasReferenceCountZero(relation)) elog(ERROR, "relation %u is still open", rid); Assert(relation->rd_droppedSubid == InvalidSubTransactionId); if (relation->rd_createSubid != InvalidSubTransactionId || relation->rd_firstRelfilelocatorSubid != InvalidSubTransactionId) { /* * In the event of subtransaction rollback, we must not forget * rd_*Subid. Mark the entry "dropped" and invalidate it, instead of * destroying it right away. (If we're in a top transaction, we could * opt to destroy the entry.) */ relation->rd_droppedSubid = GetCurrentSubTransactionId(); RelationInvalidateRelation(relation); } else RelationClearRelation(relation); } /* * RelationCacheInvalidateEntry * * This routine is invoked for SI cache flush messages. * * Any relcache entry matching the relid must be flushed. (Note: caller has * already determined that the relid belongs to our database or is a shared * relation.) * * We used to skip local relations, on the grounds that they could * not be targets of cross-backend SI update messages; but it seems * safer to process them, so that our *own* SI update messages will * have the same effects during CommandCounterIncrement for both * local and nonlocal relations. */ void RelationCacheInvalidateEntry(Oid relationId) { Relation relation; RelationIdCacheLookup(relationId, relation); if (relation) { relcacheInvalsReceived++; RelationFlushRelation(relation); } else { int i; for (i = 0; i < in_progress_list_len; i++) if (in_progress_list[i].reloid == relationId) in_progress_list[i].invalidated = true; } } /* * RelationCacheInvalidate * Blow away cached relation descriptors that have zero reference counts, * and rebuild those with positive reference counts. Also reset the smgr * relation cache and re-read relation mapping data. * * Apart from debug_discard_caches, this is currently used only to recover * from SI message buffer overflow, so we do not touch relations having * new-in-transaction relfilenumbers; they cannot be targets of cross-backend * SI updates (and our own updates now go through a separate linked list * that isn't limited by the SI message buffer size). * * We do this in two phases: the first pass deletes deletable items, and * the second one rebuilds the rebuildable items. This is essential for * safety, because hash_seq_search only copes with concurrent deletion of * the element it is currently visiting. If a second SI overflow were to * occur while we are walking the table, resulting in recursive entry to * this routine, we could crash because the inner invocation blows away * the entry next to be visited by the outer scan. But this way is OK, * because (a) during the first pass we won't process any more SI messages, * so hash_seq_search will complete safely; (b) during the second pass we * only hold onto pointers to nondeletable entries. * * The two-phase approach also makes it easy to update relfilenumbers for * mapped relations before we do anything else, and to ensure that the * second pass processes nailed-in-cache items before other nondeletable * items. This should ensure that system catalogs are up to date before * we attempt to use them to reload information about other open relations. * * After those two phases of work having immediate effects, we normally * signal any RelationBuildDesc() on the stack to start over. However, we * don't do this if called as part of debug_discard_caches. Otherwise, * RelationBuildDesc() would become an infinite loop. */ void RelationCacheInvalidate(bool debug_discard) { HASH_SEQ_STATUS status; RelIdCacheEnt *idhentry; Relation relation; List *rebuildFirstList = NIL; List *rebuildList = NIL; ListCell *l; int i; /* * Reload relation mapping data before starting to reconstruct cache. */ RelationMapInvalidateAll(); /* Phase 1 */ hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) { relation = idhentry->reldesc; /* * Ignore new relations; no other backend will manipulate them before * we commit. Likewise, before replacing a relation's relfilelocator, * we shall have acquired AccessExclusiveLock and drained any * applicable pending invalidations. */ if (relation->rd_createSubid != InvalidSubTransactionId || relation->rd_firstRelfilelocatorSubid != InvalidSubTransactionId) continue; relcacheInvalsReceived++; if (RelationHasReferenceCountZero(relation)) { /* Delete this entry immediately */ RelationClearRelation(relation); } else { /* * If it's a mapped relation, immediately update its rd_locator in * case its relfilenumber changed. We must do this during phase 1 * in case the relation is consulted during rebuild of other * relcache entries in phase 2. It's safe since consulting the * map doesn't involve any access to relcache entries. */ if (RelationIsMapped(relation)) { RelationCloseSmgr(relation); RelationInitPhysicalAddr(relation); } /* * Add this entry to list of stuff to rebuild in second pass. * pg_class goes to the front of rebuildFirstList while * pg_class_oid_index goes to the back of rebuildFirstList, so * they are done first and second respectively. Other nailed * relations go to the front of rebuildList, so they'll be done * next in no particular order; and everything else goes to the * back of rebuildList. */ if (RelationGetRelid(relation) == RelationRelationId) rebuildFirstList = lcons(relation, rebuildFirstList); else if (RelationGetRelid(relation) == ClassOidIndexId) rebuildFirstList = lappend(rebuildFirstList, relation); else if (relation->rd_isnailed) rebuildList = lcons(relation, rebuildList); else rebuildList = lappend(rebuildList, relation); } } /* * We cannot destroy the SMgrRelations as there might still be references * to them, but close the underlying file descriptors. */ smgrreleaseall(); /* * Phase 2: rebuild (or invalidate) the items found to need rebuild in * phase 1 */ foreach(l, rebuildFirstList) { relation = (Relation) lfirst(l); if (!IsTransactionState() || (relation->rd_isnailed && relation->rd_refcnt == 1)) RelationInvalidateRelation(relation); else RelationRebuildRelation(relation); } list_free(rebuildFirstList); foreach(l, rebuildList) { relation = (Relation) lfirst(l); if (!IsTransactionState() || (relation->rd_isnailed && relation->rd_refcnt == 1)) RelationInvalidateRelation(relation); else RelationRebuildRelation(relation); } list_free(rebuildList); if (!debug_discard) /* Any RelationBuildDesc() on the stack must start over. */ for (i = 0; i < in_progress_list_len; i++) in_progress_list[i].invalidated = true; } static void RememberToFreeTupleDescAtEOX(TupleDesc td) { if (EOXactTupleDescArray == NULL) { MemoryContext oldcxt; oldcxt = MemoryContextSwitchTo(CacheMemoryContext); EOXactTupleDescArray = (TupleDesc *) palloc(16 * sizeof(TupleDesc)); EOXactTupleDescArrayLen = 16; NextEOXactTupleDescNum = 0; MemoryContextSwitchTo(oldcxt); } else if (NextEOXactTupleDescNum >= EOXactTupleDescArrayLen) { int32 newlen = EOXactTupleDescArrayLen * 2; Assert(EOXactTupleDescArrayLen > 0); EOXactTupleDescArray = (TupleDesc *) repalloc(EOXactTupleDescArray, newlen * sizeof(TupleDesc)); EOXactTupleDescArrayLen = newlen; } EOXactTupleDescArray[NextEOXactTupleDescNum++] = td; } #ifdef USE_ASSERT_CHECKING static void AssertPendingSyncConsistency(Relation relation) { bool relcache_verdict = RelationIsPermanent(relation) && ((relation->rd_createSubid != InvalidSubTransactionId && RELKIND_HAS_STORAGE(relation->rd_rel->relkind)) || relation->rd_firstRelfilelocatorSubid != InvalidSubTransactionId); Assert(relcache_verdict == RelFileLocatorSkippingWAL(relation->rd_locator)); if (relation->rd_droppedSubid != InvalidSubTransactionId) Assert(!relation->rd_isvalid && (relation->rd_createSubid != InvalidSubTransactionId || relation->rd_firstRelfilelocatorSubid != InvalidSubTransactionId)); } /* * AssertPendingSyncs_RelationCache * * Assert that relcache.c and storage.c agree on whether to skip WAL. */ void AssertPendingSyncs_RelationCache(void) { HASH_SEQ_STATUS status; LOCALLOCK *locallock; Relation *rels; int maxrels; int nrels; RelIdCacheEnt *idhentry; int i; /* * Open every relation that this transaction has locked. If, for some * relation, storage.c is skipping WAL and relcache.c is not skipping WAL, * a CommandCounterIncrement() typically yields a local invalidation * message that destroys the relcache entry. By recreating such entries * here, we detect the problem. */ PushActiveSnapshot(GetTransactionSnapshot()); maxrels = 1; rels = palloc(maxrels * sizeof(*rels)); nrels = 0; hash_seq_init(&status, GetLockMethodLocalHash()); while ((locallock = (LOCALLOCK *) hash_seq_search(&status)) != NULL) { Oid relid; Relation r; if (locallock->nLocks <= 0) continue; if ((LockTagType) locallock->tag.lock.locktag_type != LOCKTAG_RELATION) continue; relid = locallock->tag.lock.locktag_field2; r = RelationIdGetRelation(relid); if (!RelationIsValid(r)) continue; if (nrels >= maxrels) { maxrels *= 2; rels = repalloc(rels, maxrels * sizeof(*rels)); } rels[nrels++] = r; } hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) AssertPendingSyncConsistency(idhentry->reldesc); for (i = 0; i < nrels; i++) RelationClose(rels[i]); PopActiveSnapshot(); } #endif /* * AtEOXact_RelationCache * * Clean up the relcache at main-transaction commit or abort. * * Note: this must be called *before* processing invalidation messages. * In the case of abort, we don't want to try to rebuild any invalidated * cache entries (since we can't safely do database accesses). Therefore * we must reset refcnts before handling pending invalidations. * * As of PostgreSQL 8.1, relcache refcnts should get released by the * ResourceOwner mechanism. This routine just does a debugging * cross-check that no pins remain. However, we also need to do special * cleanup when the current transaction created any relations or made use * of forced index lists. */ void AtEOXact_RelationCache(bool isCommit) { HASH_SEQ_STATUS status; RelIdCacheEnt *idhentry; int i; /* * Forget in_progress_list. This is relevant when we're aborting due to * an error during RelationBuildDesc(). */ Assert(in_progress_list_len == 0 || !isCommit); in_progress_list_len = 0; /* * Unless the eoxact_list[] overflowed, we only need to examine the rels * listed in it. Otherwise fall back on a hash_seq_search scan. * * For simplicity, eoxact_list[] entries are not deleted till end of * top-level transaction, even though we could remove them at * subtransaction end in some cases, or remove relations from the list if * they are cleared for other reasons. Therefore we should expect the * case that list entries are not found in the hashtable; if not, there's * nothing to do for them. */ if (eoxact_list_overflowed) { hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) { AtEOXact_cleanup(idhentry->reldesc, isCommit); } } else { for (i = 0; i < eoxact_list_len; i++) { idhentry = (RelIdCacheEnt *) hash_search(RelationIdCache, &eoxact_list[i], HASH_FIND, NULL); if (idhentry != NULL) AtEOXact_cleanup(idhentry->reldesc, isCommit); } } if (EOXactTupleDescArrayLen > 0) { Assert(EOXactTupleDescArray != NULL); for (i = 0; i < NextEOXactTupleDescNum; i++) FreeTupleDesc(EOXactTupleDescArray[i]); pfree(EOXactTupleDescArray); EOXactTupleDescArray = NULL; } /* Now we're out of the transaction and can clear the lists */ eoxact_list_len = 0; eoxact_list_overflowed = false; NextEOXactTupleDescNum = 0; EOXactTupleDescArrayLen = 0; } /* * AtEOXact_cleanup * * Clean up a single rel at main-transaction commit or abort * * NB: this processing must be idempotent, because EOXactListAdd() doesn't * bother to prevent duplicate entries in eoxact_list[]. */ static void AtEOXact_cleanup(Relation relation, bool isCommit) { bool clear_relcache = false; /* * The relcache entry's ref count should be back to its normal * not-in-a-transaction state: 0 unless it's nailed in cache. * * In bootstrap mode, this is NOT true, so don't check it --- the * bootstrap code expects relations to stay open across start/commit * transaction calls. (That seems bogus, but it's not worth fixing.) * * Note: ideally this check would be applied to every relcache entry, not * just those that have eoxact work to do. But it's not worth forcing a * scan of the whole relcache just for this. (Moreover, doing so would * mean that assert-enabled testing never tests the hash_search code path * above, which seems a bad idea.) */ #ifdef USE_ASSERT_CHECKING if (!IsBootstrapProcessingMode()) { int expected_refcnt; expected_refcnt = relation->rd_isnailed ? 1 : 0; Assert(relation->rd_refcnt == expected_refcnt); } #endif /* * Is the relation live after this transaction ends? * * During commit, clear the relcache entry if it is preserved after * relation drop, in order not to orphan the entry. During rollback, * clear the relcache entry if the relation is created in the current * transaction since it isn't interesting any longer once we are out of * the transaction. */ clear_relcache = (isCommit ? relation->rd_droppedSubid != InvalidSubTransactionId : relation->rd_createSubid != InvalidSubTransactionId); /* * Since we are now out of the transaction, reset the subids to zero. That * also lets RelationClearRelation() drop the relcache entry. */ relation->rd_createSubid = InvalidSubTransactionId; relation->rd_newRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_droppedSubid = InvalidSubTransactionId; if (clear_relcache) { if (RelationHasReferenceCountZero(relation)) { RelationClearRelation(relation); return; } else { /* * Hmm, somewhere there's a (leaked?) reference to the relation. * We daren't remove the entry for fear of dereferencing a * dangling pointer later. Bleat, and mark it as not belonging to * the current transaction. Hopefully it'll get cleaned up * eventually. This must be just a WARNING to avoid * error-during-error-recovery loops. */ elog(WARNING, "cannot remove relcache entry for \"%s\" because it has nonzero refcount", RelationGetRelationName(relation)); } } } /* * AtEOSubXact_RelationCache * * Clean up the relcache at sub-transaction commit or abort. * * Note: this must be called *before* processing invalidation messages. */ void AtEOSubXact_RelationCache(bool isCommit, SubTransactionId mySubid, SubTransactionId parentSubid) { HASH_SEQ_STATUS status; RelIdCacheEnt *idhentry; int i; /* * Forget in_progress_list. This is relevant when we're aborting due to * an error during RelationBuildDesc(). We don't commit subtransactions * during RelationBuildDesc(). */ Assert(in_progress_list_len == 0 || !isCommit); in_progress_list_len = 0; /* * Unless the eoxact_list[] overflowed, we only need to examine the rels * listed in it. Otherwise fall back on a hash_seq_search scan. Same * logic as in AtEOXact_RelationCache. */ if (eoxact_list_overflowed) { hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) { AtEOSubXact_cleanup(idhentry->reldesc, isCommit, mySubid, parentSubid); } } else { for (i = 0; i < eoxact_list_len; i++) { idhentry = (RelIdCacheEnt *) hash_search(RelationIdCache, &eoxact_list[i], HASH_FIND, NULL); if (idhentry != NULL) AtEOSubXact_cleanup(idhentry->reldesc, isCommit, mySubid, parentSubid); } } /* Don't reset the list; we still need more cleanup later */ } /* * AtEOSubXact_cleanup * * Clean up a single rel at subtransaction commit or abort * * NB: this processing must be idempotent, because EOXactListAdd() doesn't * bother to prevent duplicate entries in eoxact_list[]. */ static void AtEOSubXact_cleanup(Relation relation, bool isCommit, SubTransactionId mySubid, SubTransactionId parentSubid) { /* * Is it a relation created in the current subtransaction? * * During subcommit, mark it as belonging to the parent, instead, as long * as it has not been dropped. Otherwise simply delete the relcache entry. * --- it isn't interesting any longer. */ if (relation->rd_createSubid == mySubid) { /* * Valid rd_droppedSubid means the corresponding relation is dropped * but the relcache entry is preserved for at-commit pending sync. We * need to drop it explicitly here not to make the entry orphan. */ Assert(relation->rd_droppedSubid == mySubid || relation->rd_droppedSubid == InvalidSubTransactionId); if (isCommit && relation->rd_droppedSubid == InvalidSubTransactionId) relation->rd_createSubid = parentSubid; else if (RelationHasReferenceCountZero(relation)) { /* allow the entry to be removed */ relation->rd_createSubid = InvalidSubTransactionId; relation->rd_newRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; relation->rd_droppedSubid = InvalidSubTransactionId; RelationClearRelation(relation); return; } else { /* * Hmm, somewhere there's a (leaked?) reference to the relation. * We daren't remove the entry for fear of dereferencing a * dangling pointer later. Bleat, and transfer it to the parent * subtransaction so we can try again later. This must be just a * WARNING to avoid error-during-error-recovery loops. */ relation->rd_createSubid = parentSubid; elog(WARNING, "cannot remove relcache entry for \"%s\" because it has nonzero refcount", RelationGetRelationName(relation)); } } /* * Likewise, update or drop any new-relfilenumber-in-subtransaction record * or drop record. */ if (relation->rd_newRelfilelocatorSubid == mySubid) { if (isCommit) relation->rd_newRelfilelocatorSubid = parentSubid; else relation->rd_newRelfilelocatorSubid = InvalidSubTransactionId; } if (relation->rd_firstRelfilelocatorSubid == mySubid) { if (isCommit) relation->rd_firstRelfilelocatorSubid = parentSubid; else relation->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; } if (relation->rd_droppedSubid == mySubid) { if (isCommit) relation->rd_droppedSubid = parentSubid; else relation->rd_droppedSubid = InvalidSubTransactionId; } } /* * RelationBuildLocalRelation * Build a relcache entry for an about-to-be-created relation, * and enter it into the relcache. */ Relation RelationBuildLocalRelation(const char *relname, Oid relnamespace, TupleDesc tupDesc, Oid relid, Oid accessmtd, RelFileNumber relfilenumber, Oid reltablespace, bool shared_relation, bool mapped_relation, char relpersistence, char relkind) { Relation rel; MemoryContext oldcxt; int natts = tupDesc->natts; int i; bool has_not_null; bool nailit; Assert(natts >= 0); /* * check for creation of a rel that must be nailed in cache. * * XXX this list had better match the relations specially handled in * RelationCacheInitializePhase2/3. */ switch (relid) { case DatabaseRelationId: case AuthIdRelationId: case AuthMemRelationId: case RelationRelationId: case AttributeRelationId: case ProcedureRelationId: case TypeRelationId: nailit = true; break; default: nailit = false; break; } /* * check that hardwired list of shared rels matches what's in the * bootstrap .bki file. If you get a failure here during initdb, you * probably need to fix IsSharedRelation() to match whatever you've done * to the set of shared relations. */ if (shared_relation != IsSharedRelation(relid)) elog(ERROR, "shared_relation flag for \"%s\" does not match IsSharedRelation(%u)", relname, relid); /* Shared relations had better be mapped, too */ Assert(mapped_relation || !shared_relation); /* * switch to the cache context to create the relcache entry. */ if (!CacheMemoryContext) CreateCacheMemoryContext(); oldcxt = MemoryContextSwitchTo(CacheMemoryContext); /* * allocate a new relation descriptor and fill in basic state fields. */ rel = palloc0_object(RelationData); /* make sure relation is marked as having no open file yet */ rel->rd_smgr = NULL; /* mark it nailed if appropriate */ rel->rd_isnailed = nailit; rel->rd_refcnt = nailit ? 1 : 0; /* it's being created in this transaction */ rel->rd_createSubid = GetCurrentSubTransactionId(); rel->rd_newRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_droppedSubid = InvalidSubTransactionId; /* * create a new tuple descriptor from the one passed in. We do this * partly to copy it into the cache context, and partly because the new * relation can't have any defaults or constraints yet; they have to be * added in later steps, because they require additions to multiple system * catalogs. We can copy attnotnull constraints here, however. */ rel->rd_att = CreateTupleDescCopy(tupDesc); rel->rd_att->tdrefcount = 1; /* mark as refcounted */ has_not_null = false; for (i = 0; i < natts; i++) { Form_pg_attribute satt = TupleDescAttr(tupDesc, i); Form_pg_attribute datt = TupleDescAttr(rel->rd_att, i); datt->attidentity = satt->attidentity; datt->attgenerated = satt->attgenerated; datt->attnotnull = satt->attnotnull; has_not_null |= satt->attnotnull; populate_compact_attribute(rel->rd_att, i); if (satt->attnotnull) { CompactAttribute *scatt = TupleDescCompactAttr(tupDesc, i); CompactAttribute *dcatt = TupleDescCompactAttr(rel->rd_att, i); dcatt->attnullability = scatt->attnullability; } } if (has_not_null) { TupleConstr *constr = palloc0_object(TupleConstr); constr->has_not_null = true; rel->rd_att->constr = constr; } /* * initialize relation tuple form (caller may add/override data later) */ rel->rd_rel = (Form_pg_class) palloc0(CLASS_TUPLE_SIZE); namestrcpy(&rel->rd_rel->relname, relname); rel->rd_rel->relnamespace = relnamespace; rel->rd_rel->relkind = relkind; rel->rd_rel->relnatts = natts; rel->rd_rel->reltype = InvalidOid; /* needed when bootstrapping: */ rel->rd_rel->relowner = BOOTSTRAP_SUPERUSERID; /* set up persistence and relcache fields dependent on it */ rel->rd_rel->relpersistence = relpersistence; switch (relpersistence) { case RELPERSISTENCE_UNLOGGED: case RELPERSISTENCE_PERMANENT: rel->rd_backend = INVALID_PROC_NUMBER; rel->rd_islocaltemp = false; break; case RELPERSISTENCE_TEMP: Assert(isTempOrTempToastNamespace(relnamespace)); rel->rd_backend = ProcNumberForTempRelations(); rel->rd_islocaltemp = true; break; default: elog(ERROR, "invalid relpersistence: %c", relpersistence); break; } /* if it's a materialized view, it's not populated initially */ if (relkind == RELKIND_MATVIEW) rel->rd_rel->relispopulated = false; else rel->rd_rel->relispopulated = true; /* set replica identity -- system catalogs and non-tables don't have one */ if (!IsCatalogNamespace(relnamespace) && (relkind == RELKIND_RELATION || relkind == RELKIND_MATVIEW || relkind == RELKIND_PARTITIONED_TABLE)) rel->rd_rel->relreplident = REPLICA_IDENTITY_DEFAULT; else rel->rd_rel->relreplident = REPLICA_IDENTITY_NOTHING; /* * Insert relation physical and logical identifiers (OIDs) into the right * places. For a mapped relation, we set relfilenumber to zero and rely * on RelationInitPhysicalAddr to consult the map. */ rel->rd_rel->relisshared = shared_relation; RelationGetRelid(rel) = relid; for (i = 0; i < natts; i++) TupleDescAttr(rel->rd_att, i)->attrelid = relid; TupleDescFinalize(rel->rd_att); rel->rd_rel->reltablespace = reltablespace; if (mapped_relation) { rel->rd_rel->relfilenode = InvalidRelFileNumber; /* Add it to the active mapping information */ RelationMapUpdateMap(relid, relfilenumber, shared_relation, true); } else rel->rd_rel->relfilenode = relfilenumber; RelationInitLockInfo(rel); /* see lmgr.c */ RelationInitPhysicalAddr(rel); rel->rd_rel->relam = accessmtd; /* * RelationInitTableAccessMethod will do syscache lookups, so we mustn't * run it in CacheMemoryContext. Fortunately, the remaining steps don't * require a long-lived current context. */ MemoryContextSwitchTo(oldcxt); if (RELKIND_HAS_TABLE_AM(relkind) || relkind == RELKIND_SEQUENCE) RelationInitTableAccessMethod(rel); /* * Leave index access method uninitialized, because the pg_index row has * not been inserted at this stage of index creation yet. The cache * invalidation after pg_index row has been inserted will initialize it. */ /* * Okay to insert into the relcache hash table. * * Ordinarily, there should certainly not be an existing hash entry for * the same OID; but during bootstrap, when we create a "real" relcache * entry for one of the bootstrap relations, we'll be overwriting the * phony one created with formrdesc. So allow that to happen for nailed * rels. */ RelationCacheInsert(rel, nailit); /* * Flag relation as needing eoxact cleanup (to clear rd_createSubid). We * can't do this before storing relid in it. */ EOXactListAdd(rel); /* It's fully valid */ rel->rd_isvalid = true; /* * Caller expects us to pin the returned entry. */ RelationIncrementReferenceCount(rel); return rel; } /* * RelationSetNewRelfilenumber * * Assign a new relfilenumber (physical file name), and possibly a new * persistence setting, to the relation. * * This allows a full rewrite of the relation to be done with transactional * safety (since the filenumber assignment can be rolled back). Note however * that there is no simple way to access the relation's old data for the * remainder of the current transaction. This limits the usefulness to cases * such as TRUNCATE or rebuilding an index from scratch. * * Caller must already hold exclusive lock on the relation. */ void RelationSetNewRelfilenumber(Relation relation, char persistence) { RelFileNumber newrelfilenumber; Relation pg_class; ItemPointerData otid; HeapTuple tuple; Form_pg_class classform; MultiXactId minmulti = InvalidMultiXactId; TransactionId freezeXid = InvalidTransactionId; RelFileLocator newrlocator; if (!IsBinaryUpgrade) { /* Allocate a new relfilenumber */ newrelfilenumber = GetNewRelFileNumber(relation->rd_rel->reltablespace, NULL, persistence); } else if (relation->rd_rel->relkind == RELKIND_INDEX) { if (!OidIsValid(binary_upgrade_next_index_pg_class_relfilenumber)) ereport(ERROR, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), errmsg("index relfilenumber value not set when in binary upgrade mode"))); newrelfilenumber = binary_upgrade_next_index_pg_class_relfilenumber; binary_upgrade_next_index_pg_class_relfilenumber = InvalidOid; } else if (relation->rd_rel->relkind == RELKIND_RELATION) { if (!OidIsValid(binary_upgrade_next_heap_pg_class_relfilenumber)) ereport(ERROR, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), errmsg("heap relfilenumber value not set when in binary upgrade mode"))); newrelfilenumber = binary_upgrade_next_heap_pg_class_relfilenumber; binary_upgrade_next_heap_pg_class_relfilenumber = InvalidOid; } else ereport(ERROR, (errcode(ERRCODE_INVALID_PARAMETER_VALUE), errmsg("unexpected request for new relfilenumber in binary upgrade mode"))); /* * Get a writable copy of the pg_class tuple for the given relation. */ pg_class = table_open(RelationRelationId, RowExclusiveLock); tuple = SearchSysCacheLockedCopy1(RELOID, ObjectIdGetDatum(RelationGetRelid(relation))); if (!HeapTupleIsValid(tuple)) elog(ERROR, "could not find tuple for relation %u", RelationGetRelid(relation)); otid = tuple->t_self; classform = (Form_pg_class) GETSTRUCT(tuple); /* * Schedule unlinking of the old storage at transaction commit, except * when performing a binary upgrade, when we must do it immediately. */ if (IsBinaryUpgrade) { SMgrRelation srel; /* * During a binary upgrade, we use this code path to ensure that * pg_largeobject and its index have the same relfilenumbers as in the * old cluster. This is necessary because pg_upgrade treats * pg_largeobject like a user table, not a system table. It is however * possible that a table or index may need to end up with the same * relfilenumber in the new cluster as what it had in the old cluster. * Hence, we can't wait until commit time to remove the old storage. * * In general, this function needs to have transactional semantics, * and removing the old storage before commit time surely isn't. * However, it doesn't really matter, because if a binary upgrade * fails at this stage, the new cluster will need to be recreated * anyway. */ srel = smgropen(relation->rd_locator, relation->rd_backend); smgrdounlinkall(&srel, 1, false); smgrclose(srel); } else { /* Not a binary upgrade, so just schedule it to happen later. */ RelationDropStorage(relation); } /* * Create storage for the main fork of the new relfilenumber. If it's a * table-like object, call into the table AM to do so, which'll also * create the table's init fork if needed. * * NOTE: If relevant for the AM, any conflict in relfilenumber value will * be caught here, if GetNewRelFileNumber messes up for any reason. */ newrlocator = relation->rd_locator; newrlocator.relNumber = newrelfilenumber; if (RELKIND_HAS_TABLE_AM(relation->rd_rel->relkind)) { table_relation_set_new_filelocator(relation, &newrlocator, persistence, &freezeXid, &minmulti); } else if (RELKIND_HAS_STORAGE(relation->rd_rel->relkind)) { /* handle these directly, at least for now */ SMgrRelation srel; srel = RelationCreateStorage(newrlocator, persistence, true); smgrclose(srel); } else { /* we shouldn't be called for anything else */ elog(ERROR, "relation \"%s\" does not have storage", RelationGetRelationName(relation)); } /* * If we're dealing with a mapped index, pg_class.relfilenode doesn't * change; instead we have to send the update to the relation mapper. * * For mapped indexes, we don't actually change the pg_class entry at all; * this is essential when reindexing pg_class itself. That leaves us with * possibly-inaccurate values of relpages etc, but those will be fixed up * later. */ if (RelationIsMapped(relation)) { /* This case is only supported for indexes */ Assert(relation->rd_rel->relkind == RELKIND_INDEX); /* Since we're not updating pg_class, these had better not change */ Assert(classform->relfrozenxid == freezeXid); Assert(classform->relminmxid == minmulti); Assert(classform->relpersistence == persistence); /* * In some code paths it's possible that the tuple update we'd * otherwise do here is the only thing that would assign an XID for * the current transaction. However, we must have an XID to delete * files, so make sure one is assigned. */ (void) GetCurrentTransactionId(); /* Do the deed */ RelationMapUpdateMap(RelationGetRelid(relation), newrelfilenumber, relation->rd_rel->relisshared, false); /* Since we're not updating pg_class, must trigger inval manually */ CacheInvalidateRelcache(relation); } else { /* Normal case, update the pg_class entry */ classform->relfilenode = newrelfilenumber; /* relpages etc. never change for sequences */ if (relation->rd_rel->relkind != RELKIND_SEQUENCE) { classform->relpages = 0; /* it's empty until further notice */ classform->reltuples = -1; classform->relallvisible = 0; classform->relallfrozen = 0; } classform->relfrozenxid = freezeXid; classform->relminmxid = minmulti; classform->relpersistence = persistence; CatalogTupleUpdate(pg_class, &otid, tuple); } UnlockTuple(pg_class, &otid, InplaceUpdateTupleLock); heap_freetuple(tuple); table_close(pg_class, RowExclusiveLock); /* * Make the pg_class row change or relation map change visible. This will * cause the relcache entry to get updated, too. */ CommandCounterIncrement(); RelationAssumeNewRelfilelocator(relation); } /* * RelationAssumeNewRelfilelocator * * Code that modifies pg_class.reltablespace or pg_class.relfilenode must call * this. The call shall precede any code that might insert WAL records whose * replay would modify bytes in the new RelFileLocator, and the call shall follow * any WAL modifying bytes in the prior RelFileLocator. See struct RelationData. * Ideally, call this as near as possible to the CommandCounterIncrement() * that makes the pg_class change visible (before it or after it); that * minimizes the chance of future development adding a forbidden WAL insertion * between RelationAssumeNewRelfilelocator() and CommandCounterIncrement(). */ void RelationAssumeNewRelfilelocator(Relation relation) { relation->rd_newRelfilelocatorSubid = GetCurrentSubTransactionId(); if (relation->rd_firstRelfilelocatorSubid == InvalidSubTransactionId) relation->rd_firstRelfilelocatorSubid = relation->rd_newRelfilelocatorSubid; /* Flag relation as needing eoxact cleanup (to clear these fields) */ EOXactListAdd(relation); } /* * RelationCacheInitialize * * This initializes the relation descriptor cache. At the time * that this is invoked, we can't do database access yet (mainly * because the transaction subsystem is not up); all we are doing * is making an empty cache hashtable. This must be done before * starting the initialization transaction, because otherwise * AtEOXact_RelationCache would crash if that transaction aborts * before we can get the relcache set up. */ #define INITRELCACHESIZE 400 void RelationCacheInitialize(void) { HASHCTL ctl; int allocsize; /* * make sure cache memory context exists */ if (!CacheMemoryContext) CreateCacheMemoryContext(); /* * create hashtable that indexes the relcache */ ctl.keysize = sizeof(Oid); ctl.entrysize = sizeof(RelIdCacheEnt); RelationIdCache = hash_create("Relcache by OID", INITRELCACHESIZE, &ctl, HASH_ELEM | HASH_BLOBS); /* * reserve enough in_progress_list slots for many cases */ allocsize = 4; in_progress_list = MemoryContextAlloc(CacheMemoryContext, allocsize * sizeof(*in_progress_list)); in_progress_list_maxlen = allocsize; /* * relation mapper needs to be initialized too */ RelationMapInitialize(); } /* * RelationCacheInitializePhase2 * * This is called to prepare for access to shared catalogs during startup. * We must at least set up nailed reldescs for pg_database, pg_authid, * pg_auth_members, and pg_shseclabel. Ideally we'd like to have reldescs * for their indexes, too. We attempt to load this information from the * shared relcache init file. If that's missing or broken, just make * phony entries for the catalogs themselves. * RelationCacheInitializePhase3 will clean up as needed. */ void RelationCacheInitializePhase2(void) { MemoryContext oldcxt; /* * relation mapper needs initialized too */ RelationMapInitializePhase2(); /* * In bootstrap mode, the shared catalogs aren't there yet anyway, so do * nothing. */ if (IsBootstrapProcessingMode()) return; /* * switch to cache memory context */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); /* * Try to load the shared relcache cache file. If unsuccessful, bootstrap * the cache with pre-made descriptors for the critical shared catalogs. */ if (!load_relcache_init_file(true)) { formrdesc("pg_database", DatabaseRelation_Rowtype_Id, true, Natts_pg_database, Desc_pg_database); formrdesc("pg_authid", AuthIdRelation_Rowtype_Id, true, Natts_pg_authid, Desc_pg_authid); formrdesc("pg_auth_members", AuthMemRelation_Rowtype_Id, true, Natts_pg_auth_members, Desc_pg_auth_members); formrdesc("pg_shseclabel", SharedSecLabelRelation_Rowtype_Id, true, Natts_pg_shseclabel, Desc_pg_shseclabel); formrdesc("pg_subscription", SubscriptionRelation_Rowtype_Id, true, Natts_pg_subscription, Desc_pg_subscription); #define NUM_CRITICAL_SHARED_RELS 5 /* fix if you change list above */ } MemoryContextSwitchTo(oldcxt); } /* * RelationCacheInitializePhase3 * * This is called as soon as the catcache and transaction system * are functional and we have determined MyDatabaseId. At this point * we can actually read data from the database's system catalogs. * We first try to read pre-computed relcache entries from the local * relcache init file. If that's missing or broken, make phony entries * for the minimum set of nailed-in-cache relations. Then (unless * bootstrapping) make sure we have entries for the critical system * indexes. Once we've done all this, we have enough infrastructure to * open any system catalog or use any catcache. The last step is to * rewrite the cache files if needed. */ void RelationCacheInitializePhase3(void) { HASH_SEQ_STATUS status; RelIdCacheEnt *idhentry; MemoryContext oldcxt; bool needNewCacheFile = !criticalSharedRelcachesBuilt; /* * relation mapper needs initialized too */ RelationMapInitializePhase3(); /* * switch to cache memory context */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); /* * Try to load the local relcache cache file. If unsuccessful, bootstrap * the cache with pre-made descriptors for the critical "nailed-in" system * catalogs. */ if (IsBootstrapProcessingMode() || !load_relcache_init_file(false)) { needNewCacheFile = true; formrdesc("pg_class", RelationRelation_Rowtype_Id, false, Natts_pg_class, Desc_pg_class); formrdesc("pg_attribute", AttributeRelation_Rowtype_Id, false, Natts_pg_attribute, Desc_pg_attribute); formrdesc("pg_proc", ProcedureRelation_Rowtype_Id, false, Natts_pg_proc, Desc_pg_proc); formrdesc("pg_type", TypeRelation_Rowtype_Id, false, Natts_pg_type, Desc_pg_type); #define NUM_CRITICAL_LOCAL_RELS 4 /* fix if you change list above */ } MemoryContextSwitchTo(oldcxt); /* In bootstrap mode, the faked-up formrdesc info is all we'll have */ if (IsBootstrapProcessingMode()) return; /* * If we didn't get the critical system indexes loaded into relcache, do * so now. These are critical because the catcache and/or opclass cache * depend on them for fetches done during relcache load. Thus, we have an * infinite-recursion problem. We can break the recursion by doing * heapscans instead of indexscans at certain key spots. To avoid hobbling * performance, we only want to do that until we have the critical indexes * loaded into relcache. Thus, the flag criticalRelcachesBuilt is used to * decide whether to do heapscan or indexscan at the key spots, and we set * it true after we've loaded the critical indexes. * * The critical indexes are marked as "nailed in cache", partly to make it * easy for load_relcache_init_file to count them, but mainly because we * cannot flush and rebuild them once we've set criticalRelcachesBuilt to * true. (NOTE: perhaps it would be possible to reload them by * temporarily setting criticalRelcachesBuilt to false again. For now, * though, we just nail 'em in.) * * RewriteRelRulenameIndexId and TriggerRelidNameIndexId are not critical * in the same way as the others, because the critical catalogs don't * (currently) have any rules or triggers, and so these indexes can be * rebuilt without inducing recursion. However they are used during * relcache load when a rel does have rules or triggers, so we choose to * nail them for performance reasons. */ if (!criticalRelcachesBuilt) { load_critical_index(ClassOidIndexId, RelationRelationId); load_critical_index(AttributeRelidNumIndexId, AttributeRelationId); load_critical_index(IndexRelidIndexId, IndexRelationId); load_critical_index(OpclassOidIndexId, OperatorClassRelationId); load_critical_index(AccessMethodProcedureIndexId, AccessMethodProcedureRelationId); load_critical_index(RewriteRelRulenameIndexId, RewriteRelationId); load_critical_index(TriggerRelidNameIndexId, TriggerRelationId); #define NUM_CRITICAL_LOCAL_INDEXES 7 /* fix if you change list above */ criticalRelcachesBuilt = true; } /* * Process critical shared indexes too. * * DatabaseNameIndexId isn't critical for relcache loading, but rather for * initial lookup of MyDatabaseId, without which we'll never find any * non-shared catalogs at all. Autovacuum calls InitPostgres with a * database OID, so it instead depends on DatabaseOidIndexId. We also * need to nail up some indexes on pg_authid and pg_auth_members for use * during client authentication. SharedSecLabelObjectIndexId isn't * critical for the core system, but authentication hooks might be * interested in it. */ if (!criticalSharedRelcachesBuilt) { load_critical_index(DatabaseNameIndexId, DatabaseRelationId); load_critical_index(DatabaseOidIndexId, DatabaseRelationId); load_critical_index(AuthIdRolnameIndexId, AuthIdRelationId); load_critical_index(AuthIdOidIndexId, AuthIdRelationId); load_critical_index(AuthMemMemRoleIndexId, AuthMemRelationId); load_critical_index(SharedSecLabelObjectIndexId, SharedSecLabelRelationId); #define NUM_CRITICAL_SHARED_INDEXES 6 /* fix if you change list above */ criticalSharedRelcachesBuilt = true; } /* * Now, scan all the relcache entries and update anything that might be * wrong in the results from formrdesc or the relcache cache file. If we * faked up relcache entries using formrdesc, then read the real pg_class * rows and replace the fake entries with them. Also, if any of the * relcache entries have rules, triggers, or security policies, load that * info the hard way since it isn't recorded in the cache file. * * Whenever we access the catalogs to read data, there is a possibility of * a shared-inval cache flush causing relcache entries to be removed. * Since hash_seq_search only guarantees to still work after the *current* * entry is removed, it's unsafe to continue the hashtable scan afterward. * We handle this by restarting the scan from scratch after each access. * This is theoretically O(N^2), but the number of entries that actually * need to be fixed is small enough that it doesn't matter. */ hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) { Relation relation = idhentry->reldesc; bool restart = false; /* * Make sure *this* entry doesn't get flushed while we work with it. */ RelationIncrementReferenceCount(relation); /* * If it's a faked-up entry, read the real pg_class tuple. */ if (relation->rd_rel->relowner == InvalidOid) { HeapTuple htup; Form_pg_class relp; htup = SearchSysCache1(RELOID, ObjectIdGetDatum(RelationGetRelid(relation))); if (!HeapTupleIsValid(htup)) ereport(FATAL, errcode(ERRCODE_UNDEFINED_OBJECT), errmsg_internal("cache lookup failed for relation %u", RelationGetRelid(relation))); relp = (Form_pg_class) GETSTRUCT(htup); /* * Copy tuple to relation->rd_rel. (See notes in * AllocateRelationDesc()) */ memcpy((char *) relation->rd_rel, (char *) relp, CLASS_TUPLE_SIZE); /* Update rd_options while we have the tuple */ if (relation->rd_options) pfree(relation->rd_options); RelationParseRelOptions(relation, htup); /* * Check the values in rd_att were set up correctly. (We cannot * just copy them over now: formrdesc must have set up the rd_att * data correctly to start with, because it may already have been * copied into one or more catcache entries.) */ Assert(relation->rd_att->tdtypeid == relp->reltype); Assert(relation->rd_att->tdtypmod == -1); ReleaseSysCache(htup); /* relowner had better be OK now, else we'll loop forever */ if (relation->rd_rel->relowner == InvalidOid) elog(ERROR, "invalid relowner in pg_class entry for \"%s\"", RelationGetRelationName(relation)); restart = true; } /* * Fix data that isn't saved in relcache cache file. * * relhasrules or relhastriggers could possibly be wrong or out of * date. If we don't actually find any rules or triggers, clear the * local copy of the flag so that we don't get into an infinite loop * here. We don't make any attempt to fix the pg_class entry, though. */ if (relation->rd_rel->relhasrules && relation->rd_rules == NULL) { RelationBuildRuleLock(relation); if (relation->rd_rules == NULL) relation->rd_rel->relhasrules = false; restart = true; } if (relation->rd_rel->relhastriggers && relation->trigdesc == NULL) { RelationBuildTriggers(relation); if (relation->trigdesc == NULL) relation->rd_rel->relhastriggers = false; restart = true; } /* * Re-load the row security policies if the relation has them, since * they are not preserved in the cache. Note that we can never NOT * have a policy while relrowsecurity is true, * RelationBuildRowSecurity will create a single default-deny policy * if there is no policy defined in pg_policy. */ if (relation->rd_rel->relrowsecurity && relation->rd_rsdesc == NULL) { RelationBuildRowSecurity(relation); Assert(relation->rd_rsdesc != NULL); restart = true; } /* Reload tableam data if needed */ if (relation->rd_tableam == NULL && (RELKIND_HAS_TABLE_AM(relation->rd_rel->relkind) || relation->rd_rel->relkind == RELKIND_SEQUENCE)) { RelationInitTableAccessMethod(relation); Assert(relation->rd_tableam != NULL); restart = true; } /* Release hold on the relation */ RelationDecrementReferenceCount(relation); /* Now, restart the hashtable scan if needed */ if (restart) { hash_seq_term(&status); hash_seq_init(&status, RelationIdCache); } } /* * Lastly, write out new relcache cache files if needed. We don't bother * to distinguish cases where only one of the two needs an update. */ if (needNewCacheFile) { /* * Force all the catcaches to finish initializing and thereby open the * catalogs and indexes they use. This will preload the relcache with * entries for all the most important system catalogs and indexes, so * that the init files will be most useful for future backends. */ InitCatalogCachePhase2(); /* now write the files */ write_relcache_init_file(true); write_relcache_init_file(false); } } /* * Load one critical system index into the relcache * * indexoid is the OID of the target index, heapoid is the OID of the catalog * it belongs to. */ static void load_critical_index(Oid indexoid, Oid heapoid) { Relation ird; /* * We must lock the underlying catalog before locking the index to avoid * deadlock, since RelationBuildDesc might well need to read the catalog, * and if anyone else is exclusive-locking this catalog and index they'll * be doing it in that order. */ LockRelationOid(heapoid, AccessShareLock); LockRelationOid(indexoid, AccessShareLock); ird = RelationBuildDesc(indexoid, true); if (ird == NULL) ereport(PANIC, errcode(ERRCODE_DATA_CORRUPTED), errmsg_internal("could not open critical system index %u", indexoid)); ird->rd_isnailed = true; ird->rd_refcnt = 1; UnlockRelationOid(indexoid, AccessShareLock); UnlockRelationOid(heapoid, AccessShareLock); (void) RelationGetIndexAttOptions(ird, false); } /* * GetPgClassDescriptor -- get a predefined tuple descriptor for pg_class * GetPgIndexDescriptor -- get a predefined tuple descriptor for pg_index * * We need this kluge because we have to be able to access non-fixed-width * fields of pg_class and pg_index before we have the standard catalog caches * available. We use predefined data that's set up in just the same way as * the bootstrapped reldescs used by formrdesc(). The resulting tupdesc is * not 100% kosher: it does not have the correct rowtype OID in tdtypeid, nor * does it have a TupleConstr field. But it's good enough for the purpose of * extracting fields. */ static TupleDesc BuildHardcodedDescriptor(int natts, const FormData_pg_attribute *attrs) { TupleDesc result; MemoryContext oldcxt; int i; oldcxt = MemoryContextSwitchTo(CacheMemoryContext); result = CreateTemplateTupleDesc(natts); result->tdtypeid = RECORDOID; /* not right, but we don't care */ result->tdtypmod = -1; for (i = 0; i < natts; i++) { memcpy(TupleDescAttr(result, i), &attrs[i], ATTRIBUTE_FIXED_PART_SIZE); populate_compact_attribute(result, i); } TupleDescFinalize(result); /* Note: we don't bother to set up a TupleConstr entry */ MemoryContextSwitchTo(oldcxt); return result; } static TupleDesc GetPgClassDescriptor(void) { static TupleDesc pgclassdesc = NULL; /* Already done? */ if (pgclassdesc == NULL) pgclassdesc = BuildHardcodedDescriptor(Natts_pg_class, Desc_pg_class); return pgclassdesc; } static TupleDesc GetPgIndexDescriptor(void) { static TupleDesc pgindexdesc = NULL; /* Already done? */ if (pgindexdesc == NULL) pgindexdesc = BuildHardcodedDescriptor(Natts_pg_index, Desc_pg_index); return pgindexdesc; } /* * Load any default attribute value definitions for the relation. * * ndef is the number of attributes that were marked atthasdef. * * Note: we don't make it a hard error to be missing some pg_attrdef records. * We can limp along as long as nothing needs to use the default value. Code * that fails to find an expected AttrDefault record should throw an error. */ static void AttrDefaultFetch(Relation relation, int ndef) { AttrDefault *attrdef; Relation adrel; SysScanDesc adscan; ScanKeyData skey; HeapTuple htup; int found = 0; /* Allocate array with room for as many entries as expected */ attrdef = (AttrDefault *) MemoryContextAllocZero(CacheMemoryContext, ndef * sizeof(AttrDefault)); /* Search pg_attrdef for relevant entries */ ScanKeyInit(&skey, Anum_pg_attrdef_adrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); adrel = table_open(AttrDefaultRelationId, AccessShareLock); adscan = systable_beginscan(adrel, AttrDefaultIndexId, true, NULL, 1, &skey); while (HeapTupleIsValid(htup = systable_getnext(adscan))) { Form_pg_attrdef adform = (Form_pg_attrdef) GETSTRUCT(htup); Datum val; bool isnull; /* protect limited size of array */ if (found >= ndef) { elog(WARNING, "unexpected pg_attrdef record found for attribute %d of relation \"%s\"", adform->adnum, RelationGetRelationName(relation)); break; } val = fastgetattr(htup, Anum_pg_attrdef_adbin, adrel->rd_att, &isnull); if (isnull) elog(WARNING, "null adbin for attribute %d of relation \"%s\"", adform->adnum, RelationGetRelationName(relation)); else { /* detoast and convert to cstring in caller's context */ char *s = TextDatumGetCString(val); attrdef[found].adnum = adform->adnum; attrdef[found].adbin = MemoryContextStrdup(CacheMemoryContext, s); pfree(s); found++; } } systable_endscan(adscan); table_close(adrel, AccessShareLock); if (found != ndef) elog(WARNING, "%d pg_attrdef record(s) missing for relation \"%s\"", ndef - found, RelationGetRelationName(relation)); /* * Sort the AttrDefault entries by adnum, for the convenience of * equalTupleDescs(). (Usually, they already will be in order, but this * might not be so if systable_getnext isn't using an index.) */ if (found > 1) qsort(attrdef, found, sizeof(AttrDefault), AttrDefaultCmp); /* Install array only after it's fully valid */ relation->rd_att->constr->defval = attrdef; relation->rd_att->constr->num_defval = found; } /* * qsort comparator to sort AttrDefault entries by adnum */ static int AttrDefaultCmp(const void *a, const void *b) { const AttrDefault *ada = (const AttrDefault *) a; const AttrDefault *adb = (const AttrDefault *) b; return pg_cmp_s16(ada->adnum, adb->adnum); } /* * Load any check constraints for the relation, and update not-null validity * of invalid constraints. * * As with defaults, if we don't find the expected number of them, just warn * here. The executor should throw an error if an INSERT/UPDATE is attempted. */ static void CheckNNConstraintFetch(Relation relation) { ConstrCheck *check; int ncheck = relation->rd_rel->relchecks; Relation conrel; SysScanDesc conscan; ScanKeyData skey[1]; HeapTuple htup; int found = 0; /* Allocate array with room for as many entries as expected, if needed */ if (ncheck > 0) check = (ConstrCheck *) MemoryContextAllocZero(CacheMemoryContext, ncheck * sizeof(ConstrCheck)); else check = NULL; /* Search pg_constraint for relevant entries */ ScanKeyInit(&skey[0], Anum_pg_constraint_conrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); conrel = table_open(ConstraintRelationId, AccessShareLock); conscan = systable_beginscan(conrel, ConstraintRelidTypidNameIndexId, true, NULL, 1, skey); while (HeapTupleIsValid(htup = systable_getnext(conscan))) { Form_pg_constraint conform = (Form_pg_constraint) GETSTRUCT(htup); Datum val; bool isnull; /* * If this is a not-null constraint, then only look at it if it's * invalid, and if so, mark the TupleDesc entry as known invalid. * Otherwise move on. We'll mark any remaining columns that are still * in UNKNOWN state as known valid later. This allows us not to have * to extract the attnum from this constraint tuple in the vast * majority of cases. */ if (conform->contype == CONSTRAINT_NOTNULL) { if (!conform->convalidated) { AttrNumber attnum; attnum = extractNotNullColumn(htup); Assert(relation->rd_att->compact_attrs[attnum - 1].attnullability == ATTNULLABLE_UNKNOWN); relation->rd_att->compact_attrs[attnum - 1].attnullability = ATTNULLABLE_INVALID; } continue; } /* For what follows, consider check constraints only */ if (conform->contype != CONSTRAINT_CHECK) continue; /* protect limited size of array */ if (found >= ncheck) { elog(WARNING, "unexpected pg_constraint record found for relation \"%s\"", RelationGetRelationName(relation)); break; } /* Grab and test conbin is actually set */ val = fastgetattr(htup, Anum_pg_constraint_conbin, conrel->rd_att, &isnull); if (isnull) elog(WARNING, "null conbin for relation \"%s\"", RelationGetRelationName(relation)); else { /* detoast and convert to cstring in caller's context */ char *s = TextDatumGetCString(val); check[found].ccenforced = conform->conenforced; check[found].ccvalid = conform->convalidated; check[found].ccnoinherit = conform->connoinherit; check[found].ccname = MemoryContextStrdup(CacheMemoryContext, NameStr(conform->conname)); check[found].ccbin = MemoryContextStrdup(CacheMemoryContext, s); pfree(s); found++; } } systable_endscan(conscan); table_close(conrel, AccessShareLock); if (found != ncheck) elog(WARNING, "%d pg_constraint record(s) missing for relation \"%s\"", ncheck - found, RelationGetRelationName(relation)); /* * Sort the records by name. This ensures that CHECKs are applied in a * deterministic order, and it also makes equalTupleDescs() faster. */ if (found > 1) qsort(check, found, sizeof(ConstrCheck), CheckConstraintCmp); /* Install array only after it's fully valid */ relation->rd_att->constr->check = check; relation->rd_att->constr->num_check = found; } /* * qsort comparator to sort ConstrCheck entries by name */ static int CheckConstraintCmp(const void *a, const void *b) { const ConstrCheck *ca = (const ConstrCheck *) a; const ConstrCheck *cb = (const ConstrCheck *) b; return strcmp(ca->ccname, cb->ccname); } /* * RelationGetFKeyList -- get a list of foreign key info for the relation * * Returns a list of ForeignKeyCacheInfo structs, one per FK constraining * the given relation. This data is a direct copy of relevant fields from * pg_constraint. The list items are in no particular order. * * CAUTION: the returned list is part of the relcache's data, and could * vanish in a relcache entry reset. Callers must inspect or copy it * before doing anything that might trigger a cache flush, such as * system catalog accesses. copyObject() can be used if desired. * (We define it this way because current callers want to filter and * modify the list entries anyway, so copying would be a waste of time.) */ List * RelationGetFKeyList(Relation relation) { List *result; Relation conrel; SysScanDesc conscan; ScanKeyData skey; HeapTuple htup; List *oldlist; MemoryContext oldcxt; /* Quick exit if we already computed the list. */ if (relation->rd_fkeyvalid) return relation->rd_fkeylist; /* * We build the list we intend to return (in the caller's context) while * doing the scan. After successfully completing the scan, we copy that * list into the relcache entry. This avoids cache-context memory leakage * if we get some sort of error partway through. */ result = NIL; /* Prepare to scan pg_constraint for entries having conrelid = this rel. */ ScanKeyInit(&skey, Anum_pg_constraint_conrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); conrel = table_open(ConstraintRelationId, AccessShareLock); conscan = systable_beginscan(conrel, ConstraintRelidTypidNameIndexId, true, NULL, 1, &skey); while (HeapTupleIsValid(htup = systable_getnext(conscan))) { Form_pg_constraint constraint = (Form_pg_constraint) GETSTRUCT(htup); ForeignKeyCacheInfo *info; /* consider only foreign keys */ if (constraint->contype != CONSTRAINT_FOREIGN) continue; info = makeNode(ForeignKeyCacheInfo); info->conoid = constraint->oid; info->conrelid = constraint->conrelid; info->confrelid = constraint->confrelid; info->conenforced = constraint->conenforced; DeconstructFkConstraintRow(htup, &info->nkeys, info->conkey, info->confkey, info->conpfeqop, NULL, NULL, NULL, NULL); /* Add FK's node to the result list */ result = lappend(result, info); } systable_endscan(conscan); table_close(conrel, AccessShareLock); /* Now save a copy of the completed list in the relcache entry. */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); oldlist = relation->rd_fkeylist; relation->rd_fkeylist = copyObject(result); relation->rd_fkeyvalid = true; MemoryContextSwitchTo(oldcxt); /* Don't leak the old list, if there is one */ list_free_deep(oldlist); return result; } /* * RelationGetIndexList -- get a list of OIDs of indexes on this relation * * The index list is created only if someone requests it. We scan pg_index * to find relevant indexes, and add the list to the relcache entry so that * we won't have to compute it again. Note that shared cache inval of a * relcache entry will delete the old list and set rd_indexvalid to false, * so that we must recompute the index list on next request. This handles * creation or deletion of an index. * * Indexes that are marked not indislive are omitted from the returned list. * Such indexes are expected to be dropped momentarily, and should not be * touched at all by any caller of this function. * * The returned list is guaranteed to be sorted in order by OID. This is * needed by the executor, since for index types that we obtain exclusive * locks on when updating the index, all backends must lock the indexes in * the same order or we will get deadlocks (see ExecOpenIndices()). Any * consistent ordering would do, but ordering by OID is easy. * * Since shared cache inval causes the relcache's copy of the list to go away, * we return a copy of the list palloc'd in the caller's context. The caller * may list_free() the returned list after scanning it. This is necessary * since the caller will typically be doing syscache lookups on the relevant * indexes, and syscache lookup could cause SI messages to be processed! * * In exactly the same way, we update rd_pkindex, which is the OID of the * relation's primary key index if any, else InvalidOid; and rd_replidindex, * which is the pg_class OID of an index to be used as the relation's * replication identity index, or InvalidOid if there is no such index. */ List * RelationGetIndexList(Relation relation) { Relation indrel; SysScanDesc indscan; ScanKeyData skey; HeapTuple htup; List *result; List *oldlist; char replident = relation->rd_rel->relreplident; Oid pkeyIndex = InvalidOid; Oid candidateIndex = InvalidOid; bool pkdeferrable = false; MemoryContext oldcxt; /* Quick exit if we already computed the list. */ if (relation->rd_indexvalid) return list_copy(relation->rd_indexlist); /* * We build the list we intend to return (in the caller's context) while * doing the scan. After successfully completing the scan, we copy that * list into the relcache entry. This avoids cache-context memory leakage * if we get some sort of error partway through. */ result = NIL; /* Prepare to scan pg_index for entries having indrelid = this rel. */ ScanKeyInit(&skey, Anum_pg_index_indrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); indrel = table_open(IndexRelationId, AccessShareLock); indscan = systable_beginscan(indrel, IndexIndrelidIndexId, true, NULL, 1, &skey); while (HeapTupleIsValid(htup = systable_getnext(indscan))) { Form_pg_index index = (Form_pg_index) GETSTRUCT(htup); /* * Ignore any indexes that are currently being dropped. This will * prevent them from being searched, inserted into, or considered in * HOT-safety decisions. It's unsafe to touch such an index at all * since its catalog entries could disappear at any instant. */ if (!index->indislive) continue; /* add index's OID to result list */ result = lappend_oid(result, index->indexrelid); /* * Non-unique or predicate indexes aren't interesting for either oid * indexes or replication identity indexes, so don't check them. * Deferred ones are not useful for replication identity either; but * we do include them if they are PKs. */ if (!index->indisunique || !heap_attisnull(htup, Anum_pg_index_indpred, NULL)) continue; /* * Remember primary key index, if any. For regular tables we do this * only if the index is valid; but for partitioned tables, then we do * it even if it's invalid. * * The reason for returning invalid primary keys for partitioned * tables is that we need it to prevent drop of not-null constraints * that may underlie such a primary key, which is only a problem for * partitioned tables. */ if (index->indisprimary && (index->indisvalid || relation->rd_rel->relkind == RELKIND_PARTITIONED_TABLE)) { pkeyIndex = index->indexrelid; pkdeferrable = !index->indimmediate; } if (!index->indimmediate) continue; if (!index->indisvalid) continue; /* remember explicitly chosen replica index */ if (index->indisreplident) candidateIndex = index->indexrelid; } systable_endscan(indscan); table_close(indrel, AccessShareLock); /* Sort the result list into OID order, per API spec. */ list_sort(result, list_oid_cmp); /* Now save a copy of the completed list in the relcache entry. */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); oldlist = relation->rd_indexlist; relation->rd_indexlist = list_copy(result); relation->rd_pkindex = pkeyIndex; relation->rd_ispkdeferrable = pkdeferrable; if (replident == REPLICA_IDENTITY_DEFAULT && OidIsValid(pkeyIndex) && !pkdeferrable) relation->rd_replidindex = pkeyIndex; else if (replident == REPLICA_IDENTITY_INDEX && OidIsValid(candidateIndex)) relation->rd_replidindex = candidateIndex; else relation->rd_replidindex = InvalidOid; relation->rd_indexvalid = true; MemoryContextSwitchTo(oldcxt); /* Don't leak the old list, if there is one */ list_free(oldlist); return result; } /* * RelationGetStatExtList * get a list of OIDs of statistics objects on this relation * * The statistics list is created only if someone requests it, in a way * similar to RelationGetIndexList(). We scan pg_statistic_ext to find * relevant statistics, and add the list to the relcache entry so that we * won't have to compute it again. Note that shared cache inval of a * relcache entry will delete the old list and set rd_statvalid to 0, * so that we must recompute the statistics list on next request. This * handles creation or deletion of a statistics object. * * The returned list is guaranteed to be sorted in order by OID, although * this is not currently needed. * * Since shared cache inval causes the relcache's copy of the list to go away, * we return a copy of the list palloc'd in the caller's context. The caller * may list_free() the returned list after scanning it. This is necessary * since the caller will typically be doing syscache lookups on the relevant * statistics, and syscache lookup could cause SI messages to be processed! */ List * RelationGetStatExtList(Relation relation) { Relation indrel; SysScanDesc indscan; ScanKeyData skey; HeapTuple htup; List *result; List *oldlist; MemoryContext oldcxt; /* Quick exit if we already computed the list. */ if (relation->rd_statvalid != 0) return list_copy(relation->rd_statlist); /* * We build the list we intend to return (in the caller's context) while * doing the scan. After successfully completing the scan, we copy that * list into the relcache entry. This avoids cache-context memory leakage * if we get some sort of error partway through. */ result = NIL; /* * Prepare to scan pg_statistic_ext for entries having stxrelid = this * rel. */ ScanKeyInit(&skey, Anum_pg_statistic_ext_stxrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(RelationGetRelid(relation))); indrel = table_open(StatisticExtRelationId, AccessShareLock); indscan = systable_beginscan(indrel, StatisticExtRelidIndexId, true, NULL, 1, &skey); while (HeapTupleIsValid(htup = systable_getnext(indscan))) { Oid oid = ((Form_pg_statistic_ext) GETSTRUCT(htup))->oid; result = lappend_oid(result, oid); } systable_endscan(indscan); table_close(indrel, AccessShareLock); /* Sort the result list into OID order, per API spec. */ list_sort(result, list_oid_cmp); /* Now save a copy of the completed list in the relcache entry. */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); oldlist = relation->rd_statlist; relation->rd_statlist = list_copy(result); relation->rd_statvalid = true; MemoryContextSwitchTo(oldcxt); /* Don't leak the old list, if there is one */ list_free(oldlist); return result; } /* * RelationGetPrimaryKeyIndex -- get OID of the relation's primary key index * * Returns InvalidOid if there is no such index, or if the primary key is * DEFERRABLE and the caller isn't OK with that. */ Oid RelationGetPrimaryKeyIndex(Relation relation, bool deferrable_ok) { List *ilist; if (!relation->rd_indexvalid) { /* RelationGetIndexList does the heavy lifting. */ ilist = RelationGetIndexList(relation); list_free(ilist); Assert(relation->rd_indexvalid); } if (deferrable_ok) return relation->rd_pkindex; else if (relation->rd_ispkdeferrable) return InvalidOid; return relation->rd_pkindex; } /* * RelationGetReplicaIndex -- get OID of the relation's replica identity index * * Returns InvalidOid if there is no such index. */ Oid RelationGetReplicaIndex(Relation relation) { List *ilist; if (!relation->rd_indexvalid) { /* RelationGetIndexList does the heavy lifting. */ ilist = RelationGetIndexList(relation); list_free(ilist); Assert(relation->rd_indexvalid); } return relation->rd_replidindex; } /* * RelationGetIndexExpressions -- get the index expressions for an index * * We cache the result of transforming pg_index.indexprs into a node tree. * If the rel is not an index or has no expressional columns, we return NIL. * Otherwise, the returned tree is copied into the caller's memory context. * (We don't want to return a pointer to the relcache copy, since it could * disappear due to relcache invalidation.) */ List * RelationGetIndexExpressions(Relation relation) { List *result; Datum exprsDatum; bool isnull; char *exprsString; MemoryContext oldcxt; /* Quick exit if we already computed the result. */ if (relation->rd_indexprs) return copyObject(relation->rd_indexprs); /* Quick exit if there is nothing to do. */ if (relation->rd_indextuple == NULL || heap_attisnull(relation->rd_indextuple, Anum_pg_index_indexprs, NULL)) return NIL; /* * We build the tree we intend to return in the caller's context. After * successfully completing the work, we copy it into the relcache entry. * This avoids problems if we get some sort of error partway through. */ exprsDatum = heap_getattr(relation->rd_indextuple, Anum_pg_index_indexprs, GetPgIndexDescriptor(), &isnull); Assert(!isnull); exprsString = TextDatumGetCString(exprsDatum); result = (List *) stringToNode(exprsString); pfree(exprsString); /* * Run the expressions through eval_const_expressions. This is not just an * optimization, but is necessary, because the planner will be comparing * them to similarly-processed qual clauses, and may fail to detect valid * matches without this. We must not use canonicalize_qual, however, * since these aren't qual expressions. */ result = (List *) eval_const_expressions(NULL, (Node *) result); /* May as well fix opfuncids too */ fix_opfuncids((Node *) result); /* Now save a copy of the completed tree in the relcache entry. */ oldcxt = MemoryContextSwitchTo(relation->rd_indexcxt); relation->rd_indexprs = copyObject(result); MemoryContextSwitchTo(oldcxt); return result; } /* * RelationGetDummyIndexExpressions -- get dummy expressions for an index * * Return a list of dummy expressions (just Const nodes) with the same * types/typmods/collations as the index's real expressions. This is * useful in situations where we don't want to run any user-defined code. */ List * RelationGetDummyIndexExpressions(Relation relation) { List *result; Datum exprsDatum; bool isnull; char *exprsString; List *rawExprs; ListCell *lc; /* Quick exit if there is nothing to do. */ if (relation->rd_indextuple == NULL || heap_attisnull(relation->rd_indextuple, Anum_pg_index_indexprs, NULL)) return NIL; /* Extract raw node tree(s) from index tuple. */ exprsDatum = heap_getattr(relation->rd_indextuple, Anum_pg_index_indexprs, GetPgIndexDescriptor(), &isnull); Assert(!isnull); exprsString = TextDatumGetCString(exprsDatum); rawExprs = (List *) stringToNode(exprsString); pfree(exprsString); /* Construct null Consts; the typlen and typbyval are arbitrary. */ result = NIL; foreach(lc, rawExprs) { Node *rawExpr = (Node *) lfirst(lc); result = lappend(result, makeConst(exprType(rawExpr), exprTypmod(rawExpr), exprCollation(rawExpr), 1, (Datum) 0, true, true)); } return result; } /* * RelationGetIndexPredicate -- get the index predicate for an index * * We cache the result of transforming pg_index.indpred into an implicit-AND * node tree (suitable for use in planning). * If the rel is not an index or has no predicate, we return NIL. * Otherwise, the returned tree is copied into the caller's memory context. * (We don't want to return a pointer to the relcache copy, since it could * disappear due to relcache invalidation.) */ List * RelationGetIndexPredicate(Relation relation) { List *result; Datum predDatum; bool isnull; char *predString; MemoryContext oldcxt; /* Quick exit if we already computed the result. */ if (relation->rd_indpred) return copyObject(relation->rd_indpred); /* Quick exit if there is nothing to do. */ if (relation->rd_indextuple == NULL || heap_attisnull(relation->rd_indextuple, Anum_pg_index_indpred, NULL)) return NIL; /* * We build the tree we intend to return in the caller's context. After * successfully completing the work, we copy it into the relcache entry. * This avoids problems if we get some sort of error partway through. */ predDatum = heap_getattr(relation->rd_indextuple, Anum_pg_index_indpred, GetPgIndexDescriptor(), &isnull); Assert(!isnull); predString = TextDatumGetCString(predDatum); result = (List *) stringToNode(predString); pfree(predString); /* * Run the expression through const-simplification and canonicalization. * This is not just an optimization, but is necessary, because the planner * will be comparing it to similarly-processed qual clauses, and may fail * to detect valid matches without this. This must match the processing * done to qual clauses in preprocess_expression()! (We can skip the * stuff involving subqueries, however, since we don't allow any in index * predicates.) */ result = (List *) eval_const_expressions(NULL, (Node *) result); result = (List *) canonicalize_qual((Expr *) result, false); /* Also convert to implicit-AND format */ result = make_ands_implicit((Expr *) result); /* May as well fix opfuncids too */ fix_opfuncids((Node *) result); /* Now save a copy of the completed tree in the relcache entry. */ oldcxt = MemoryContextSwitchTo(relation->rd_indexcxt); relation->rd_indpred = copyObject(result); MemoryContextSwitchTo(oldcxt); return result; } /* * RelationGetIndexAttrBitmap -- get a bitmap of index attribute numbers * * The result has a bit set for each attribute used anywhere in the index * definitions of all the indexes on this relation. (This includes not only * simple index keys, but attributes used in expressions and partial-index * predicates.) * * Depending on attrKind, a bitmap covering attnums for certain columns is * returned: * INDEX_ATTR_BITMAP_KEY Columns in non-partial unique indexes not * in expressions (i.e., usable for FKs) * INDEX_ATTR_BITMAP_PRIMARY_KEY Columns in the table's primary key * (beware: even if PK is deferrable!) * INDEX_ATTR_BITMAP_IDENTITY_KEY Columns in the table's replica identity * index (empty if FULL) * INDEX_ATTR_BITMAP_HOT_BLOCKING Columns that block updates from being HOT * INDEX_ATTR_BITMAP_SUMMARIZED Columns included in summarizing indexes * * Attribute numbers are offset by FirstLowInvalidHeapAttributeNumber so that * we can include system attributes (e.g., OID) in the bitmap representation. * * Deferred indexes are considered for the primary key, but not for replica * identity. * * Caller had better hold at least RowExclusiveLock on the target relation * to ensure it is safe (deadlock-free) for us to take locks on the relation's * indexes. Note that since the introduction of CREATE INDEX CONCURRENTLY, * that lock level doesn't guarantee a stable set of indexes, so we have to * be prepared to retry here in case of a change in the set of indexes. * * The returned result is palloc'd in the caller's memory context and should * be bms_free'd when not needed anymore. */ Bitmapset * RelationGetIndexAttrBitmap(Relation relation, IndexAttrBitmapKind attrKind) { Bitmapset *uindexattrs; /* columns in unique indexes */ Bitmapset *pkindexattrs; /* columns in the primary index */ Bitmapset *idindexattrs; /* columns in the replica identity */ Bitmapset *hotblockingattrs; /* columns with HOT blocking indexes */ Bitmapset *summarizedattrs; /* columns with summarizing indexes */ List *indexoidlist; List *newindexoidlist; Oid relpkindex; Oid relreplindex; ListCell *l; MemoryContext oldcxt; /* Quick exit if we already computed the result. */ if (relation->rd_attrsvalid) { switch (attrKind) { case INDEX_ATTR_BITMAP_KEY: return bms_copy(relation->rd_keyattr); case INDEX_ATTR_BITMAP_PRIMARY_KEY: return bms_copy(relation->rd_pkattr); case INDEX_ATTR_BITMAP_IDENTITY_KEY: return bms_copy(relation->rd_idattr); case INDEX_ATTR_BITMAP_HOT_BLOCKING: return bms_copy(relation->rd_hotblockingattr); case INDEX_ATTR_BITMAP_SUMMARIZED: return bms_copy(relation->rd_summarizedattr); default: elog(ERROR, "unknown attrKind %u", attrKind); } } /* Fast path if definitely no indexes */ if (!RelationGetForm(relation)->relhasindex) return NULL; /* * Get cached list of index OIDs. If we have to start over, we do so here. */ restart: indexoidlist = RelationGetIndexList(relation); /* Fall out if no indexes (but relhasindex was set) */ if (indexoidlist == NIL) return NULL; /* * Copy the rd_pkindex and rd_replidindex values computed by * RelationGetIndexList before proceeding. This is needed because a * relcache flush could occur inside index_open below, resetting the * fields managed by RelationGetIndexList. We need to do the work with * stable values of these fields. */ relpkindex = relation->rd_pkindex; relreplindex = relation->rd_replidindex; /* * For each index, add referenced attributes to indexattrs. * * Note: we consider all indexes returned by RelationGetIndexList, even if * they are not indisready or indisvalid. This is important because an * index for which CREATE INDEX CONCURRENTLY has just started must be * included in HOT-safety decisions (see README.HOT). If a DROP INDEX * CONCURRENTLY is far enough along that we should ignore the index, it * won't be returned at all by RelationGetIndexList. */ uindexattrs = NULL; pkindexattrs = NULL; idindexattrs = NULL; hotblockingattrs = NULL; summarizedattrs = NULL; foreach(l, indexoidlist) { Oid indexOid = lfirst_oid(l); Relation indexDesc; Datum datum; bool isnull; Node *indexExpressions; Node *indexPredicate; int i; bool isKey; /* candidate key */ bool isPK; /* primary key */ bool isIDKey; /* replica identity index */ Bitmapset **attrs; indexDesc = index_open(indexOid, AccessShareLock); /* * Extract index expressions and index predicate. Note: Don't use * RelationGetIndexExpressions()/RelationGetIndexPredicate(), because * those might run constant expressions evaluation, which needs a * snapshot, which we might not have here. (Also, it's probably more * sound to collect the bitmaps before any transformations that might * eliminate columns, but the practical impact of this is limited.) */ datum = heap_getattr(indexDesc->rd_indextuple, Anum_pg_index_indexprs, GetPgIndexDescriptor(), &isnull); if (!isnull) indexExpressions = stringToNode(TextDatumGetCString(datum)); else indexExpressions = NULL; datum = heap_getattr(indexDesc->rd_indextuple, Anum_pg_index_indpred, GetPgIndexDescriptor(), &isnull); if (!isnull) indexPredicate = stringToNode(TextDatumGetCString(datum)); else indexPredicate = NULL; /* Can this index be referenced by a foreign key? */ isKey = indexDesc->rd_index->indisunique && indexExpressions == NULL && indexPredicate == NULL; /* Is this a primary key? */ isPK = (indexOid == relpkindex); /* Is this index the configured (or default) replica identity? */ isIDKey = (indexOid == relreplindex); /* * If the index is summarizing, it doesn't block HOT updates, but we * may still need to update it (if the attributes were modified). So * decide which bitmap we'll update in the following loop. */ if (indexDesc->rd_indam->amsummarizing) attrs = &summarizedattrs; else attrs = &hotblockingattrs; /* Collect simple attribute references */ for (i = 0; i < indexDesc->rd_index->indnatts; i++) { int attrnum = indexDesc->rd_index->indkey.values[i]; /* * Since we have covering indexes with non-key columns, we must * handle them accurately here. non-key columns must be added into * hotblockingattrs or summarizedattrs, since they are in index, * and update shouldn't miss them. * * Summarizing indexes do not block HOT, but do need to be updated * when the column value changes, thus require a separate * attribute bitmapset. * * Obviously, non-key columns couldn't be referenced by foreign * key or identity key. Hence we do not include them into * uindexattrs, pkindexattrs and idindexattrs bitmaps. */ if (attrnum != 0) { *attrs = bms_add_member(*attrs, attrnum - FirstLowInvalidHeapAttributeNumber); if (isKey && i < indexDesc->rd_index->indnkeyatts) uindexattrs = bms_add_member(uindexattrs, attrnum - FirstLowInvalidHeapAttributeNumber); if (isPK && i < indexDesc->rd_index->indnkeyatts) pkindexattrs = bms_add_member(pkindexattrs, attrnum - FirstLowInvalidHeapAttributeNumber); if (isIDKey && i < indexDesc->rd_index->indnkeyatts) idindexattrs = bms_add_member(idindexattrs, attrnum - FirstLowInvalidHeapAttributeNumber); } } /* Collect all attributes used in expressions, too */ pull_varattnos(indexExpressions, 1, attrs); /* Collect all attributes in the index predicate, too */ pull_varattnos(indexPredicate, 1, attrs); index_close(indexDesc, AccessShareLock); } /* * During one of the index_opens in the above loop, we might have received * a relcache flush event on this relcache entry, which might have been * signaling a change in the rel's index list. If so, we'd better start * over to ensure we deliver up-to-date attribute bitmaps. */ newindexoidlist = RelationGetIndexList(relation); if (equal(indexoidlist, newindexoidlist) && relpkindex == relation->rd_pkindex && relreplindex == relation->rd_replidindex) { /* Still the same index set, so proceed */ list_free(newindexoidlist); list_free(indexoidlist); } else { /* Gotta do it over ... might as well not leak memory */ list_free(newindexoidlist); list_free(indexoidlist); bms_free(uindexattrs); bms_free(pkindexattrs); bms_free(idindexattrs); bms_free(hotblockingattrs); bms_free(summarizedattrs); goto restart; } /* Don't leak the old values of these bitmaps, if any */ relation->rd_attrsvalid = false; bms_free(relation->rd_keyattr); relation->rd_keyattr = NULL; bms_free(relation->rd_pkattr); relation->rd_pkattr = NULL; bms_free(relation->rd_idattr); relation->rd_idattr = NULL; bms_free(relation->rd_hotblockingattr); relation->rd_hotblockingattr = NULL; bms_free(relation->rd_summarizedattr); relation->rd_summarizedattr = NULL; /* * Now save copies of the bitmaps in the relcache entry. We intentionally * set rd_attrsvalid last, because that's the one that signals validity of * the values; if we run out of memory before making that copy, we won't * leave the relcache entry looking like the other ones are valid but * empty. */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); relation->rd_keyattr = bms_copy(uindexattrs); relation->rd_pkattr = bms_copy(pkindexattrs); relation->rd_idattr = bms_copy(idindexattrs); relation->rd_hotblockingattr = bms_copy(hotblockingattrs); relation->rd_summarizedattr = bms_copy(summarizedattrs); relation->rd_attrsvalid = true; MemoryContextSwitchTo(oldcxt); /* We return our original working copy for caller to play with */ switch (attrKind) { case INDEX_ATTR_BITMAP_KEY: return uindexattrs; case INDEX_ATTR_BITMAP_PRIMARY_KEY: return pkindexattrs; case INDEX_ATTR_BITMAP_IDENTITY_KEY: return idindexattrs; case INDEX_ATTR_BITMAP_HOT_BLOCKING: return hotblockingattrs; case INDEX_ATTR_BITMAP_SUMMARIZED: return summarizedattrs; default: elog(ERROR, "unknown attrKind %u", attrKind); return NULL; } } /* * RelationGetIdentityKeyBitmap -- get a bitmap of replica identity attribute * numbers * * A bitmap of index attribute numbers for the configured replica identity * index is returned. * * See also comments of RelationGetIndexAttrBitmap(). * * This is a special purpose function used during logical replication. Here, * unlike RelationGetIndexAttrBitmap(), we don't acquire a lock on the required * index as we build the cache entry using a historic snapshot and all the * later changes are absorbed while decoding WAL. Due to this reason, we don't * need to retry here in case of a change in the set of indexes. */ Bitmapset * RelationGetIdentityKeyBitmap(Relation relation) { Bitmapset *idindexattrs = NULL; /* columns in the replica identity */ Relation indexDesc; int i; Oid replidindex; MemoryContext oldcxt; /* Quick exit if we already computed the result */ if (relation->rd_idattr != NULL) return bms_copy(relation->rd_idattr); /* Fast path if definitely no indexes */ if (!RelationGetForm(relation)->relhasindex) return NULL; /* Historic snapshot must be set. */ Assert(HistoricSnapshotActive()); replidindex = RelationGetReplicaIndex(relation); /* Fall out if there is no replica identity index */ if (!OidIsValid(replidindex)) return NULL; /* Look up the description for the replica identity index */ indexDesc = RelationIdGetRelation(replidindex); if (!RelationIsValid(indexDesc)) elog(ERROR, "could not open relation with OID %u", relation->rd_replidindex); /* Add referenced attributes to idindexattrs */ for (i = 0; i < indexDesc->rd_index->indnatts; i++) { int attrnum = indexDesc->rd_index->indkey.values[i]; /* * We don't include non-key columns into idindexattrs bitmaps. See * RelationGetIndexAttrBitmap. */ if (attrnum != 0) { if (i < indexDesc->rd_index->indnkeyatts) idindexattrs = bms_add_member(idindexattrs, attrnum - FirstLowInvalidHeapAttributeNumber); } } RelationClose(indexDesc); /* Don't leak the old values of these bitmaps, if any */ bms_free(relation->rd_idattr); relation->rd_idattr = NULL; /* Now save copy of the bitmap in the relcache entry */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); relation->rd_idattr = bms_copy(idindexattrs); MemoryContextSwitchTo(oldcxt); /* We return our original working copy for caller to play with */ return idindexattrs; } /* * RelationGetExclusionInfo -- get info about index's exclusion constraint * * This should be called only for an index that is known to have an associated * exclusion constraint or primary key/unique constraint using WITHOUT * OVERLAPS. * * It returns arrays (palloc'd in caller's context) of the exclusion operator * OIDs, their underlying functions' OIDs, and their strategy numbers in the * index's opclasses. We cache all this information since it requires a fair * amount of work to get. */ void RelationGetExclusionInfo(Relation indexRelation, Oid **operators, Oid **procs, uint16 **strategies) { int indnkeyatts; Oid *ops; Oid *funcs; uint16 *strats; Relation conrel; SysScanDesc conscan; ScanKeyData skey[1]; HeapTuple htup; bool found; MemoryContext oldcxt; int i; indnkeyatts = IndexRelationGetNumberOfKeyAttributes(indexRelation); /* Allocate result space in caller context */ *operators = ops = palloc_array(Oid, indnkeyatts); *procs = funcs = palloc_array(Oid, indnkeyatts); *strategies = strats = palloc_array(uint16, indnkeyatts); /* Quick exit if we have the data cached already */ if (indexRelation->rd_exclstrats != NULL) { memcpy(ops, indexRelation->rd_exclops, sizeof(Oid) * indnkeyatts); memcpy(funcs, indexRelation->rd_exclprocs, sizeof(Oid) * indnkeyatts); memcpy(strats, indexRelation->rd_exclstrats, sizeof(uint16) * indnkeyatts); return; } /* * Search pg_constraint for the constraint associated with the index. To * make this not too painfully slow, we use the index on conrelid; that * will hold the parent relation's OID not the index's own OID. * * Note: if we wanted to rely on the constraint name matching the index's * name, we could just do a direct lookup using pg_constraint's unique * index. For the moment it doesn't seem worth requiring that. */ ScanKeyInit(&skey[0], Anum_pg_constraint_conrelid, BTEqualStrategyNumber, F_OIDEQ, ObjectIdGetDatum(indexRelation->rd_index->indrelid)); conrel = table_open(ConstraintRelationId, AccessShareLock); conscan = systable_beginscan(conrel, ConstraintRelidTypidNameIndexId, true, NULL, 1, skey); found = false; while (HeapTupleIsValid(htup = systable_getnext(conscan))) { Form_pg_constraint conform = (Form_pg_constraint) GETSTRUCT(htup); Datum val; bool isnull; ArrayType *arr; int nelem; /* We want the exclusion constraint owning the index */ if ((conform->contype != CONSTRAINT_EXCLUSION && !(conform->conperiod && (conform->contype == CONSTRAINT_PRIMARY || conform->contype == CONSTRAINT_UNIQUE))) || conform->conindid != RelationGetRelid(indexRelation)) continue; /* There should be only one */ if (found) elog(ERROR, "unexpected exclusion constraint record found for rel %s", RelationGetRelationName(indexRelation)); found = true; /* Extract the operator OIDS from conexclop */ val = fastgetattr(htup, Anum_pg_constraint_conexclop, conrel->rd_att, &isnull); if (isnull) elog(ERROR, "null conexclop for rel %s", RelationGetRelationName(indexRelation)); arr = DatumGetArrayTypeP(val); /* ensure not toasted */ nelem = ARR_DIMS(arr)[0]; if (ARR_NDIM(arr) != 1 || nelem != indnkeyatts || ARR_HASNULL(arr) || ARR_ELEMTYPE(arr) != OIDOID) elog(ERROR, "conexclop is not a 1-D Oid array"); memcpy(ops, ARR_DATA_PTR(arr), sizeof(Oid) * indnkeyatts); } systable_endscan(conscan); table_close(conrel, AccessShareLock); if (!found) elog(ERROR, "exclusion constraint record missing for rel %s", RelationGetRelationName(indexRelation)); /* We need the func OIDs and strategy numbers too */ for (i = 0; i < indnkeyatts; i++) { funcs[i] = get_opcode(ops[i]); strats[i] = get_op_opfamily_strategy(ops[i], indexRelation->rd_opfamily[i]); /* shouldn't fail, since it was checked at index creation */ if (strats[i] == InvalidStrategy) elog(ERROR, "could not find strategy for operator %u in family %u", ops[i], indexRelation->rd_opfamily[i]); } /* Save a copy of the results in the relcache entry. */ oldcxt = MemoryContextSwitchTo(indexRelation->rd_indexcxt); indexRelation->rd_exclops = palloc_array(Oid, indnkeyatts); indexRelation->rd_exclprocs = palloc_array(Oid, indnkeyatts); indexRelation->rd_exclstrats = palloc_array(uint16, indnkeyatts); memcpy(indexRelation->rd_exclops, ops, sizeof(Oid) * indnkeyatts); memcpy(indexRelation->rd_exclprocs, funcs, sizeof(Oid) * indnkeyatts); memcpy(indexRelation->rd_exclstrats, strats, sizeof(uint16) * indnkeyatts); MemoryContextSwitchTo(oldcxt); } /* * Get the publication information for the given relation. * * Traverse all the publications which the relation is in to get the * publication actions and validate: * 1. The row filter expressions for such publications if any. We consider the * row filter expression as invalid if it references any column which is not * part of REPLICA IDENTITY. * 2. The column list for such publication if any. We consider the column list * invalid if REPLICA IDENTITY contains any column that is not part of it. * 3. The generated columns of the relation for such publications. We consider * any reference of an unpublished generated column in REPLICA IDENTITY as * invalid. * * To avoid fetching the publication information repeatedly, we cache the * publication actions, row filter validation information, column list * validation information, and generated column validation information. */ void RelationBuildPublicationDesc(Relation relation, PublicationDesc *pubdesc) { List *puboids = NIL; List *exceptpuboids = NIL; List *alltablespuboids; ListCell *lc; MemoryContext oldcxt; Oid schemaid; List *ancestors = NIL; Oid relid = RelationGetRelid(relation); /* * If not publishable, it publishes no actions. (pgoutput_change() will * ignore it.) */ if (!is_publishable_relation(relation)) { memset(pubdesc, 0, sizeof(PublicationDesc)); pubdesc->rf_valid_for_update = true; pubdesc->rf_valid_for_delete = true; pubdesc->cols_valid_for_update = true; pubdesc->cols_valid_for_delete = true; pubdesc->gencols_valid_for_update = true; pubdesc->gencols_valid_for_delete = true; return; } if (relation->rd_pubdesc) { memcpy(pubdesc, relation->rd_pubdesc, sizeof(PublicationDesc)); return; } memset(pubdesc, 0, sizeof(PublicationDesc)); pubdesc->rf_valid_for_update = true; pubdesc->rf_valid_for_delete = true; pubdesc->cols_valid_for_update = true; pubdesc->cols_valid_for_delete = true; pubdesc->gencols_valid_for_update = true; pubdesc->gencols_valid_for_delete = true; /* Fetch the publication membership info. */ puboids = GetRelationIncludedPublications(relid); schemaid = RelationGetNamespace(relation); puboids = list_concat_unique_oid(puboids, GetSchemaPublications(schemaid)); if (relation->rd_rel->relispartition) { Oid last_ancestor_relid; /* Add publications that the ancestors are in too. */ ancestors = get_partition_ancestors(relid); last_ancestor_relid = llast_oid(ancestors); foreach(lc, ancestors) { Oid ancestor = lfirst_oid(lc); puboids = list_concat_unique_oid(puboids, GetRelationIncludedPublications(ancestor)); schemaid = get_rel_namespace(ancestor); puboids = list_concat_unique_oid(puboids, GetSchemaPublications(schemaid)); } /* * Only the top-most ancestor can appear in the EXCEPT clause. * Therefore, for a partition, exclusion must be evaluated at the * top-most ancestor. */ exceptpuboids = GetRelationExcludedPublications(last_ancestor_relid); } else { /* * For a regular table or a root partitioned table, check exclusion on * table itself. */ exceptpuboids = GetRelationExcludedPublications(relid); } alltablespuboids = GetAllTablesPublications(); puboids = list_concat_unique_oid(puboids, list_difference_oid(alltablespuboids, exceptpuboids)); foreach(lc, puboids) { Oid pubid = lfirst_oid(lc); HeapTuple tup; Form_pg_publication pubform; bool invalid_column_list; bool invalid_gen_col; tup = SearchSysCache1(PUBLICATIONOID, ObjectIdGetDatum(pubid)); if (!HeapTupleIsValid(tup)) elog(ERROR, "cache lookup failed for publication %u", pubid); pubform = (Form_pg_publication) GETSTRUCT(tup); pubdesc->pubactions.pubinsert |= pubform->pubinsert; pubdesc->pubactions.pubupdate |= pubform->pubupdate; pubdesc->pubactions.pubdelete |= pubform->pubdelete; pubdesc->pubactions.pubtruncate |= pubform->pubtruncate; /* * Check if all columns referenced in the filter expression are part * of the REPLICA IDENTITY index or not. * * If the publication is FOR ALL TABLES then it means the table has no * row filters and we can skip the validation. */ if (!pubform->puballtables && (pubform->pubupdate || pubform->pubdelete) && pub_rf_contains_invalid_column(pubid, relation, ancestors, pubform->pubviaroot)) { if (pubform->pubupdate) pubdesc->rf_valid_for_update = false; if (pubform->pubdelete) pubdesc->rf_valid_for_delete = false; } /* * Check if all columns are part of the REPLICA IDENTITY index or not. * * Check if all generated columns included in the REPLICA IDENTITY are * published. */ if ((pubform->pubupdate || pubform->pubdelete) && pub_contains_invalid_column(pubid, relation, ancestors, pubform->pubviaroot, pubform->pubgencols, &invalid_column_list, &invalid_gen_col)) { if (pubform->pubupdate) { pubdesc->cols_valid_for_update = !invalid_column_list; pubdesc->gencols_valid_for_update = !invalid_gen_col; } if (pubform->pubdelete) { pubdesc->cols_valid_for_delete = !invalid_column_list; pubdesc->gencols_valid_for_delete = !invalid_gen_col; } } ReleaseSysCache(tup); /* * If we know everything is replicated and the row filter is invalid * for update and delete, there is no point to check for other * publications. */ if (pubdesc->pubactions.pubinsert && pubdesc->pubactions.pubupdate && pubdesc->pubactions.pubdelete && pubdesc->pubactions.pubtruncate && !pubdesc->rf_valid_for_update && !pubdesc->rf_valid_for_delete) break; /* * If we know everything is replicated and the column list is invalid * for update and delete, there is no point to check for other * publications. */ if (pubdesc->pubactions.pubinsert && pubdesc->pubactions.pubupdate && pubdesc->pubactions.pubdelete && pubdesc->pubactions.pubtruncate && !pubdesc->cols_valid_for_update && !pubdesc->cols_valid_for_delete) break; /* * If we know everything is replicated and replica identity has an * unpublished generated column, there is no point to check for other * publications. */ if (pubdesc->pubactions.pubinsert && pubdesc->pubactions.pubupdate && pubdesc->pubactions.pubdelete && pubdesc->pubactions.pubtruncate && !pubdesc->gencols_valid_for_update && !pubdesc->gencols_valid_for_delete) break; } if (relation->rd_pubdesc) { pfree(relation->rd_pubdesc); relation->rd_pubdesc = NULL; } /* Now save copy of the descriptor in the relcache entry. */ oldcxt = MemoryContextSwitchTo(CacheMemoryContext); relation->rd_pubdesc = palloc_object(PublicationDesc); memcpy(relation->rd_pubdesc, pubdesc, sizeof(PublicationDesc)); MemoryContextSwitchTo(oldcxt); } static bytea ** CopyIndexAttOptions(bytea **srcopts, int natts) { bytea **opts = palloc_array(bytea *, natts); for (int i = 0; i < natts; i++) { bytea *opt = srcopts[i]; opts[i] = !opt ? NULL : (bytea *) DatumGetPointer(datumCopy(PointerGetDatum(opt), false, -1)); } return opts; } /* * RelationGetIndexAttOptions * get AM/opclass-specific options for an index parsed into a binary form */ bytea ** RelationGetIndexAttOptions(Relation relation, bool copy) { MemoryContext oldcxt; bytea **opts = relation->rd_opcoptions; Oid relid = RelationGetRelid(relation); int natts = RelationGetNumberOfAttributes(relation); /* XXX * IndexRelationGetNumberOfKeyAttributes */ int i; /* Try to copy cached options. */ if (opts) return copy ? CopyIndexAttOptions(opts, natts) : opts; /* Get and parse opclass options. */ opts = palloc0_array(bytea *, natts); for (i = 0; i < natts; i++) { if (criticalRelcachesBuilt && relid != AttributeRelidNumIndexId) { Datum attoptions = get_attoptions(relid, i + 1); opts[i] = index_opclass_options(relation, i + 1, attoptions, false); if (attoptions != (Datum) 0) pfree(DatumGetPointer(attoptions)); } } /* Copy parsed options to the cache. */ oldcxt = MemoryContextSwitchTo(relation->rd_indexcxt); relation->rd_opcoptions = CopyIndexAttOptions(opts, natts); MemoryContextSwitchTo(oldcxt); if (copy) return opts; for (i = 0; i < natts; i++) { if (opts[i]) pfree(opts[i]); } pfree(opts); return relation->rd_opcoptions; } /* * Routines to support ereport() reports of relation-related errors * * These could have been put into elog.c, but it seems like a module layering * violation to have elog.c calling relcache or syscache stuff --- and we * definitely don't want elog.h including rel.h. So we put them here. */ /* * errtable --- stores schema_name and table_name of a table * within the current errordata. */ int errtable(Relation rel) { err_generic_string(PG_DIAG_SCHEMA_NAME, get_namespace_name(RelationGetNamespace(rel))); err_generic_string(PG_DIAG_TABLE_NAME, RelationGetRelationName(rel)); return 0; /* return value does not matter */ } /* * errtablecol --- stores schema_name, table_name and column_name * of a table column within the current errordata. * * The column is specified by attribute number --- for most callers, this is * easier and less error-prone than getting the column name for themselves. */ int errtablecol(Relation rel, int attnum) { TupleDesc reldesc = RelationGetDescr(rel); const char *colname; /* Use reldesc if it's a user attribute, else consult the catalogs */ if (attnum > 0 && attnum <= reldesc->natts) colname = NameStr(TupleDescAttr(reldesc, attnum - 1)->attname); else colname = get_attname(RelationGetRelid(rel), attnum, false); return errtablecolname(rel, colname); } /* * errtablecolname --- stores schema_name, table_name and column_name * of a table column within the current errordata, where the column name is * given directly rather than extracted from the relation's catalog data. * * Don't use this directly unless errtablecol() is inconvenient for some * reason. This might possibly be needed during intermediate states in ALTER * TABLE, for instance. */ int errtablecolname(Relation rel, const char *colname) { errtable(rel); err_generic_string(PG_DIAG_COLUMN_NAME, colname); return 0; /* return value does not matter */ } /* * errtableconstraint --- stores schema_name, table_name and constraint_name * of a table-related constraint within the current errordata. */ int errtableconstraint(Relation rel, const char *conname) { errtable(rel); err_generic_string(PG_DIAG_CONSTRAINT_NAME, conname); return 0; /* return value does not matter */ } /* * load_relcache_init_file, write_relcache_init_file * * In late 1992, we started regularly having databases with more than * a thousand classes in them. With this number of classes, it became * critical to do indexed lookups on the system catalogs. * * Bootstrapping these lookups is very hard. We want to be able to * use an index on pg_attribute, for example, but in order to do so, * we must have read pg_attribute for the attributes in the index, * which implies that we need to use the index. * * In order to get around the problem, we do the following: * * + When the database system is initialized (at initdb time), we * don't use indexes. We do sequential scans. * * + When the backend is started up in normal mode, we load an image * of the appropriate relation descriptors, in internal format, * from an initialization file in the data/base/... directory. * * + If the initialization file isn't there, then we create the * relation descriptors using sequential scans and write 'em to * the initialization file for use by subsequent backends. * * As of Postgres 9.0, there is one local initialization file in each * database, plus one shared initialization file for shared catalogs. * * We could dispense with the initialization files and just build the * critical reldescs the hard way on every backend startup, but that * slows down backend startup noticeably. * * We can in fact go further, and save more relcache entries than * just the ones that are absolutely critical; this allows us to speed * up backend startup by not having to build such entries the hard way. * Presently, all the catalog and index entries that are referred to * by catcaches are stored in the initialization files. * * The same mechanism that detects when catcache and relcache entries * need to be invalidated (due to catalog updates) also arranges to * unlink the initialization files when the contents may be out of date. * The files will then be rebuilt during the next backend startup. */ /* * load_relcache_init_file -- attempt to load cache from the shared * or local cache init file * * If successful, return true and set criticalRelcachesBuilt or * criticalSharedRelcachesBuilt to true. * If not successful, return false. * * NOTE: we assume we are already switched into CacheMemoryContext. */ static bool load_relcache_init_file(bool shared) { FILE *fp; char initfilename[MAXPGPATH]; Relation *rels; int relno, num_rels, max_rels, nailed_rels, nailed_indexes, magic; int i; if (shared) snprintf(initfilename, sizeof(initfilename), "global/%s", RELCACHE_INIT_FILENAME); else snprintf(initfilename, sizeof(initfilename), "%s/%s", DatabasePath, RELCACHE_INIT_FILENAME); fp = AllocateFile(initfilename, PG_BINARY_R); if (fp == NULL) return false; /* * Read the index relcache entries from the file. Note we will not enter * any of them into the cache if the read fails partway through; this * helps to guard against broken init files. */ max_rels = 100; rels = (Relation *) palloc(max_rels * sizeof(Relation)); num_rels = 0; nailed_rels = nailed_indexes = 0; /* check for correct magic number (compatible version) */ if (fread(&magic, 1, sizeof(magic), fp) != sizeof(magic)) goto read_failed; if (magic != RELCACHE_INIT_FILEMAGIC) goto read_failed; for (relno = 0;; relno++) { Size len; size_t nread; Relation rel; Form_pg_class relform; bool has_not_null; /* first read the relation descriptor length */ nread = fread(&len, 1, sizeof(len), fp); if (nread != sizeof(len)) { if (nread == 0) break; /* end of file */ goto read_failed; } /* safety check for incompatible relcache layout */ if (len != sizeof(RelationData)) goto read_failed; /* allocate another relcache header */ if (num_rels >= max_rels) { max_rels *= 2; rels = (Relation *) repalloc(rels, max_rels * sizeof(Relation)); } rel = rels[num_rels++] = (Relation) palloc(len); /* then, read the Relation structure */ if (fread(rel, 1, len, fp) != len) goto read_failed; /* next read the relation tuple form */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; relform = (Form_pg_class) palloc(len); if (fread(relform, 1, len, fp) != len) goto read_failed; rel->rd_rel = relform; /* initialize attribute tuple forms */ rel->rd_att = CreateTemplateTupleDesc(relform->relnatts); rel->rd_att->tdrefcount = 1; /* mark as refcounted */ rel->rd_att->tdtypeid = relform->reltype ? relform->reltype : RECORDOID; rel->rd_att->tdtypmod = -1; /* just to be sure */ /* next read all the attribute tuple form data entries */ has_not_null = false; for (i = 0; i < relform->relnatts; i++) { Form_pg_attribute attr = TupleDescAttr(rel->rd_att, i); if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; if (len != ATTRIBUTE_FIXED_PART_SIZE) goto read_failed; if (fread(attr, 1, len, fp) != len) goto read_failed; has_not_null |= attr->attnotnull; populate_compact_attribute(rel->rd_att, i); } TupleDescFinalize(rel->rd_att); /* next read the access method specific field */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; if (len > 0) { rel->rd_options = palloc(len); if (fread(rel->rd_options, 1, len, fp) != len) goto read_failed; if (len != VARSIZE(rel->rd_options)) goto read_failed; /* sanity check */ } else { rel->rd_options = NULL; } /* mark not-null status */ if (has_not_null) { TupleConstr *constr = palloc0_object(TupleConstr); constr->has_not_null = true; rel->rd_att->constr = constr; } /* * If it's an index, there's more to do. Note we explicitly ignore * partitioned indexes here. */ if (rel->rd_rel->relkind == RELKIND_INDEX) { MemoryContext indexcxt; Oid *opfamily; Oid *opcintype; RegProcedure *support; int nsupport; int16 *indoption; Oid *indcollation; /* Count nailed indexes to ensure we have 'em all */ if (rel->rd_isnailed) nailed_indexes++; /* read the pg_index tuple */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; rel->rd_indextuple = (HeapTuple) palloc(len); if (fread(rel->rd_indextuple, 1, len, fp) != len) goto read_failed; /* Fix up internal pointers in the tuple -- see heap_copytuple */ rel->rd_indextuple->t_data = (HeapTupleHeader) ((char *) rel->rd_indextuple + HEAPTUPLESIZE); rel->rd_index = (Form_pg_index) GETSTRUCT(rel->rd_indextuple); /* * prepare index info context --- parameters should match * RelationInitIndexAccessInfo */ indexcxt = AllocSetContextCreate(CacheMemoryContext, "index info", ALLOCSET_SMALL_SIZES); rel->rd_indexcxt = indexcxt; MemoryContextCopyAndSetIdentifier(indexcxt, RelationGetRelationName(rel)); /* * Now we can fetch the index AM's API struct. (We can't store * that in the init file, since it contains function pointers that * might vary across server executions. Fortunately, it should be * safe to call the amhandler even while bootstrapping indexes.) */ InitIndexAmRoutine(rel); /* read the vector of opfamily OIDs */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; opfamily = (Oid *) MemoryContextAlloc(indexcxt, len); if (fread(opfamily, 1, len, fp) != len) goto read_failed; rel->rd_opfamily = opfamily; /* read the vector of opcintype OIDs */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; opcintype = (Oid *) MemoryContextAlloc(indexcxt, len); if (fread(opcintype, 1, len, fp) != len) goto read_failed; rel->rd_opcintype = opcintype; /* read the vector of support procedure OIDs */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; support = (RegProcedure *) MemoryContextAlloc(indexcxt, len); if (fread(support, 1, len, fp) != len) goto read_failed; rel->rd_support = support; /* read the vector of collation OIDs */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; indcollation = (Oid *) MemoryContextAlloc(indexcxt, len); if (fread(indcollation, 1, len, fp) != len) goto read_failed; rel->rd_indcollation = indcollation; /* read the vector of indoption values */ if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; indoption = (int16 *) MemoryContextAlloc(indexcxt, len); if (fread(indoption, 1, len, fp) != len) goto read_failed; rel->rd_indoption = indoption; /* read the vector of opcoptions values */ rel->rd_opcoptions = (bytea **) MemoryContextAllocZero(indexcxt, sizeof(*rel->rd_opcoptions) * relform->relnatts); for (i = 0; i < relform->relnatts; i++) { if (fread(&len, 1, sizeof(len), fp) != sizeof(len)) goto read_failed; if (len > 0) { rel->rd_opcoptions[i] = (bytea *) MemoryContextAlloc(indexcxt, len); if (fread(rel->rd_opcoptions[i], 1, len, fp) != len) goto read_failed; } } /* set up zeroed fmgr-info vector */ nsupport = relform->relnatts * rel->rd_indam->amsupport; rel->rd_supportinfo = (FmgrInfo *) MemoryContextAllocZero(indexcxt, nsupport * sizeof(FmgrInfo)); } else { /* Count nailed rels to ensure we have 'em all */ if (rel->rd_isnailed) nailed_rels++; /* Load table AM data */ if (RELKIND_HAS_TABLE_AM(rel->rd_rel->relkind) || rel->rd_rel->relkind == RELKIND_SEQUENCE) RelationInitTableAccessMethod(rel); Assert(rel->rd_index == NULL); Assert(rel->rd_indextuple == NULL); Assert(rel->rd_indexcxt == NULL); Assert(rel->rd_indam == NULL); Assert(rel->rd_opfamily == NULL); Assert(rel->rd_opcintype == NULL); Assert(rel->rd_support == NULL); Assert(rel->rd_supportinfo == NULL); Assert(rel->rd_indoption == NULL); Assert(rel->rd_indcollation == NULL); Assert(rel->rd_opcoptions == NULL); } /* * Rules and triggers are not saved (mainly because the internal * format is complex and subject to change). They must be rebuilt if * needed by RelationCacheInitializePhase3. This is not expected to * be a big performance hit since few system catalogs have such. Ditto * for RLS policy data, partition info, index expressions, predicates, * exclusion info, and FDW info. */ rel->rd_rules = NULL; rel->rd_rulescxt = NULL; rel->trigdesc = NULL; rel->rd_rsdesc = NULL; rel->rd_partkey = NULL; rel->rd_partkeycxt = NULL; rel->rd_partdesc = NULL; rel->rd_partdesc_nodetached = NULL; rel->rd_partdesc_nodetached_xmin = InvalidTransactionId; rel->rd_pdcxt = NULL; rel->rd_pddcxt = NULL; rel->rd_partcheck = NIL; rel->rd_partcheckvalid = false; rel->rd_partcheckcxt = NULL; rel->rd_indexprs = NIL; rel->rd_indpred = NIL; rel->rd_exclops = NULL; rel->rd_exclprocs = NULL; rel->rd_exclstrats = NULL; rel->rd_fdwroutine = NULL; /* * Reset transient-state fields in the relcache entry */ rel->rd_smgr = NULL; if (rel->rd_isnailed) rel->rd_refcnt = 1; else rel->rd_refcnt = 0; rel->rd_indexvalid = false; rel->rd_indexlist = NIL; rel->rd_pkindex = InvalidOid; rel->rd_replidindex = InvalidOid; rel->rd_attrsvalid = false; rel->rd_keyattr = NULL; rel->rd_pkattr = NULL; rel->rd_idattr = NULL; rel->rd_pubdesc = NULL; rel->rd_statvalid = false; rel->rd_statlist = NIL; rel->rd_fkeyvalid = false; rel->rd_fkeylist = NIL; rel->rd_createSubid = InvalidSubTransactionId; rel->rd_newRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_firstRelfilelocatorSubid = InvalidSubTransactionId; rel->rd_droppedSubid = InvalidSubTransactionId; rel->rd_amcache = NULL; rel->pgstat_info = NULL; /* * Recompute lock and physical addressing info. This is needed in * case the pg_internal.init file was copied from some other database * by CREATE DATABASE. */ RelationInitLockInfo(rel); RelationInitPhysicalAddr(rel); } /* * We reached the end of the init file without apparent problem. Did we * get the right number of nailed items? This is a useful crosscheck in * case the set of critical rels or indexes changes. However, that should * not happen in a normally-running system, so let's bleat if it does. * * For the shared init file, we're called before client authentication is * done, which means that elog(WARNING) will go only to the postmaster * log, where it's easily missed. To ensure that developers notice bad * values of NUM_CRITICAL_SHARED_RELS/NUM_CRITICAL_SHARED_INDEXES, we put * an Assert(false) there. */ if (shared) { if (nailed_rels != NUM_CRITICAL_SHARED_RELS || nailed_indexes != NUM_CRITICAL_SHARED_INDEXES) { elog(WARNING, "found %d nailed shared rels and %d nailed shared indexes in init file, but expected %d and %d respectively", nailed_rels, nailed_indexes, NUM_CRITICAL_SHARED_RELS, NUM_CRITICAL_SHARED_INDEXES); /* Make sure we get developers' attention about this */ Assert(false); /* In production builds, recover by bootstrapping the relcache */ goto read_failed; } } else { if (nailed_rels != NUM_CRITICAL_LOCAL_RELS || nailed_indexes != NUM_CRITICAL_LOCAL_INDEXES) { elog(WARNING, "found %d nailed rels and %d nailed indexes in init file, but expected %d and %d respectively", nailed_rels, nailed_indexes, NUM_CRITICAL_LOCAL_RELS, NUM_CRITICAL_LOCAL_INDEXES); /* We don't need an Assert() in this case */ goto read_failed; } } /* * OK, all appears well. * * Now insert all the new relcache entries into the cache. */ for (relno = 0; relno < num_rels; relno++) { RelationCacheInsert(rels[relno], false); } pfree(rels); FreeFile(fp); if (shared) criticalSharedRelcachesBuilt = true; else criticalRelcachesBuilt = true; return true; /* * init file is broken, so do it the hard way. We don't bother trying to * free the clutter we just allocated; it's not in the relcache so it * won't hurt. */ read_failed: pfree(rels); FreeFile(fp); return false; } /* * Write out a new initialization file with the current contents * of the relcache (either shared rels or local rels, as indicated). */ static void write_relcache_init_file(bool shared) { FILE *fp; char tempfilename[MAXPGPATH]; char finalfilename[MAXPGPATH]; int magic; HASH_SEQ_STATUS status; RelIdCacheEnt *idhentry; int i; /* * If we have already received any relcache inval events, there's no * chance of succeeding so we may as well skip the whole thing. */ if (relcacheInvalsReceived != 0L) return; /* * We must write a temporary file and rename it into place. Otherwise, * another backend starting at about the same time might crash trying to * read the partially-complete file. */ if (shared) { snprintf(tempfilename, sizeof(tempfilename), "global/%s.%d", RELCACHE_INIT_FILENAME, MyProcPid); snprintf(finalfilename, sizeof(finalfilename), "global/%s", RELCACHE_INIT_FILENAME); } else { snprintf(tempfilename, sizeof(tempfilename), "%s/%s.%d", DatabasePath, RELCACHE_INIT_FILENAME, MyProcPid); snprintf(finalfilename, sizeof(finalfilename), "%s/%s", DatabasePath, RELCACHE_INIT_FILENAME); } unlink(tempfilename); /* in case it exists w/wrong permissions */ fp = AllocateFile(tempfilename, PG_BINARY_W); if (fp == NULL) { /* * We used to consider this a fatal error, but we might as well * continue with backend startup ... */ ereport(WARNING, (errcode_for_file_access(), errmsg("could not create relation-cache initialization file \"%s\": %m", tempfilename), errdetail("Continuing anyway, but there's something wrong."))); return; } /* * Write a magic number to serve as a file version identifier. We can * change the magic number whenever the relcache layout changes. */ magic = RELCACHE_INIT_FILEMAGIC; if (fwrite(&magic, 1, sizeof(magic), fp) != sizeof(magic)) ereport(FATAL, errcode_for_file_access(), errmsg_internal("could not write init file: %m")); /* * Write all the appropriate reldescs (in no particular order). */ hash_seq_init(&status, RelationIdCache); while ((idhentry = (RelIdCacheEnt *) hash_seq_search(&status)) != NULL) { Relation rel = idhentry->reldesc; Form_pg_class relform = rel->rd_rel; /* ignore if not correct group */ if (relform->relisshared != shared) continue; /* * Ignore if not supposed to be in init file. We can allow any shared * relation that's been loaded so far to be in the shared init file, * but unshared relations must be ones that should be in the local * file per RelationIdIsInInitFile. (Note: if you want to change the * criterion for rels to be kept in the init file, see also inval.c. * The reason for filtering here is to be sure that we don't put * anything into the local init file for which a relcache inval would * not cause invalidation of that init file.) */ if (!shared && !RelationIdIsInInitFile(RelationGetRelid(rel))) { /* Nailed rels had better get stored. */ Assert(!rel->rd_isnailed); continue; } /* first write the relcache entry proper */ write_item(rel, sizeof(RelationData), fp); /* next write the relation tuple form */ write_item(relform, CLASS_TUPLE_SIZE, fp); /* next, do all the attribute tuple form data entries */ for (i = 0; i < relform->relnatts; i++) { write_item(TupleDescAttr(rel->rd_att, i), ATTRIBUTE_FIXED_PART_SIZE, fp); } /* next, do the access method specific field */ write_item(rel->rd_options, (rel->rd_options ? VARSIZE(rel->rd_options) : 0), fp); /* * If it's an index, there's more to do. Note we explicitly ignore * partitioned indexes here. */ if (rel->rd_rel->relkind == RELKIND_INDEX) { /* write the pg_index tuple */ /* we assume this was created by heap_copytuple! */ write_item(rel->rd_indextuple, HEAPTUPLESIZE + rel->rd_indextuple->t_len, fp); /* write the vector of opfamily OIDs */ write_item(rel->rd_opfamily, relform->relnatts * sizeof(Oid), fp); /* write the vector of opcintype OIDs */ write_item(rel->rd_opcintype, relform->relnatts * sizeof(Oid), fp); /* write the vector of support procedure OIDs */ write_item(rel->rd_support, relform->relnatts * (rel->rd_indam->amsupport * sizeof(RegProcedure)), fp); /* write the vector of collation OIDs */ write_item(rel->rd_indcollation, relform->relnatts * sizeof(Oid), fp); /* write the vector of indoption values */ write_item(rel->rd_indoption, relform->relnatts * sizeof(int16), fp); Assert(rel->rd_opcoptions); /* write the vector of opcoptions values */ for (i = 0; i < relform->relnatts; i++) { bytea *opt = rel->rd_opcoptions[i]; write_item(opt, opt ? VARSIZE(opt) : 0, fp); } } } if (FreeFile(fp)) ereport(FATAL, errcode_for_file_access(), errmsg_internal("could not write init file: %m")); /* * Now we have to check whether the data we've so painstakingly * accumulated is already obsolete due to someone else's just-committed * catalog changes. If so, we just delete the temp file and leave it to * the next backend to try again. (Our own relcache entries will be * updated by SI message processing, but we can't be sure whether what we * wrote out was up-to-date.) * * This mustn't run concurrently with the code that unlinks an init file * and sends SI messages, so grab a serialization lock for the duration. */ LWLockAcquire(RelCacheInitLock, LW_EXCLUSIVE); /* Make sure we have seen all incoming SI messages */ AcceptInvalidationMessages(); /* * If we have received any SI relcache invals since backend start, assume * we may have written out-of-date data. */ if (relcacheInvalsReceived == 0L) { /* * OK, rename the temp file to its final name, deleting any * previously-existing init file. * * Note: a failure here is possible under Cygwin, if some other * backend is holding open an unlinked-but-not-yet-gone init file. So * treat this as a noncritical failure; just remove the useless temp * file on failure. */ if (rename(tempfilename, finalfilename) < 0) unlink(tempfilename); } else { /* Delete the already-obsolete temp file */ unlink(tempfilename); } LWLockRelease(RelCacheInitLock); } /* write a chunk of data preceded by its length */ static void write_item(const void *data, Size len, FILE *fp) { if (fwrite(&len, 1, sizeof(len), fp) != sizeof(len)) ereport(FATAL, errcode_for_file_access(), errmsg_internal("could not write init file: %m")); if (len > 0 && fwrite(data, 1, len, fp) != len) ereport(FATAL, errcode_for_file_access(), errmsg_internal("could not write init file: %m")); } /* * Determine whether a given relation (identified by OID) is one of the ones * we should store in a relcache init file. * * We must cache all nailed rels, and for efficiency we should cache every rel * that supports a syscache. The former set is almost but not quite a subset * of the latter. The special cases are relations where * RelationCacheInitializePhase2/3 chooses to nail for efficiency reasons, but * which do not support any syscache. */ bool RelationIdIsInInitFile(Oid relationId) { if (relationId == SharedSecLabelRelationId || relationId == TriggerRelidNameIndexId || relationId == DatabaseNameIndexId || relationId == SharedSecLabelObjectIndexId) { /* * If this Assert fails, we don't need the applicable special case * anymore. */ Assert(!RelationSupportsSysCache(relationId)); return true; } return RelationSupportsSysCache(relationId); } /* * Invalidate (remove) the init file during commit of a transaction that * changed one or more of the relation cache entries that are kept in the * local init file. * * To be safe against concurrent inspection or rewriting of the init file, * we must take RelCacheInitLock, then remove the old init file, then send * the SI messages that include relcache inval for such relations, and then * release RelCacheInitLock. This serializes the whole affair against * write_relcache_init_file, so that we can be sure that any other process * that's concurrently trying to create a new init file won't move an * already-stale version into place after we unlink. Also, because we unlink * before sending the SI messages, a backend that's currently starting cannot * read the now-obsolete init file and then miss the SI messages that will * force it to update its relcache entries. (This works because the backend * startup sequence gets into the sinval array before trying to load the init * file.) * * We take the lock and do the unlink in RelationCacheInitFilePreInvalidate, * then release the lock in RelationCacheInitFilePostInvalidate. Caller must * send any pending SI messages between those calls. */ void RelationCacheInitFilePreInvalidate(void) { char localinitfname[MAXPGPATH]; char sharedinitfname[MAXPGPATH]; if (DatabasePath) snprintf(localinitfname, sizeof(localinitfname), "%s/%s", DatabasePath, RELCACHE_INIT_FILENAME); snprintf(sharedinitfname, sizeof(sharedinitfname), "global/%s", RELCACHE_INIT_FILENAME); LWLockAcquire(RelCacheInitLock, LW_EXCLUSIVE); /* * The files might not be there if no backend has been started since the * last removal. But complain about failures other than ENOENT with * ERROR. Fortunately, it's not too late to abort the transaction if we * can't get rid of the would-be-obsolete init file. */ if (DatabasePath) unlink_initfile(localinitfname, ERROR); unlink_initfile(sharedinitfname, ERROR); } void RelationCacheInitFilePostInvalidate(void) { LWLockRelease(RelCacheInitLock); } /* * Remove the init files during postmaster startup. * * We used to keep the init files across restarts, but that is unsafe in PITR * scenarios, and even in simple crash-recovery cases there are windows for * the init files to become out-of-sync with the database. So now we just * remove them during startup and expect the first backend launch to rebuild * them. Of course, this has to happen in each database of the cluster. */ void RelationCacheInitFileRemove(void) { const char *tblspcdir = PG_TBLSPC_DIR; DIR *dir; struct dirent *de; char path[MAXPGPATH + sizeof(PG_TBLSPC_DIR) + sizeof(TABLESPACE_VERSION_DIRECTORY)]; snprintf(path, sizeof(path), "global/%s", RELCACHE_INIT_FILENAME); unlink_initfile(path, LOG); /* Scan everything in the default tablespace */ RelationCacheInitFileRemoveInDir("base"); /* Scan the tablespace link directory to find non-default tablespaces */ dir = AllocateDir(tblspcdir); while ((de = ReadDirExtended(dir, tblspcdir, LOG)) != NULL) { if (strspn(de->d_name, "0123456789") == strlen(de->d_name)) { /* Scan the tablespace dir for per-database dirs */ snprintf(path, sizeof(path), "%s/%s/%s", tblspcdir, de->d_name, TABLESPACE_VERSION_DIRECTORY); RelationCacheInitFileRemoveInDir(path); } } FreeDir(dir); } /* Process one per-tablespace directory for RelationCacheInitFileRemove */ static void RelationCacheInitFileRemoveInDir(const char *tblspcpath) { DIR *dir; struct dirent *de; char initfilename[MAXPGPATH * 2]; /* Scan the tablespace directory to find per-database directories */ dir = AllocateDir(tblspcpath); while ((de = ReadDirExtended(dir, tblspcpath, LOG)) != NULL) { if (strspn(de->d_name, "0123456789") == strlen(de->d_name)) { /* Try to remove the init file in each database */ snprintf(initfilename, sizeof(initfilename), "%s/%s/%s", tblspcpath, de->d_name, RELCACHE_INIT_FILENAME); unlink_initfile(initfilename, LOG); } } FreeDir(dir); } static void unlink_initfile(const char *initfilename, int elevel) { if (unlink(initfilename) < 0) { /* It might not be there, but log any error other than ENOENT */ if (errno != ENOENT) ereport(elevel, (errcode_for_file_access(), errmsg("could not remove cache file \"%s\": %m", initfilename))); } } /* * ResourceOwner callbacks */ static char * ResOwnerPrintRelCache(Datum res) { Relation rel = (Relation) DatumGetPointer(res); return psprintf("relation \"%s\"", RelationGetRelationName(rel)); } static void ResOwnerReleaseRelation(Datum res) { Relation rel = (Relation) DatumGetPointer(res); /* * This reference has already been removed from the resource owner, so * just decrement reference count without calling * ResourceOwnerForgetRelationRef. */ Assert(rel->rd_refcnt > 0); rel->rd_refcnt -= 1; RelationCloseCleanup((Relation) DatumGetPointer(res)); }