/
UCS
/
openwrt
Обзор
Документация
Войти
/
UCS
/
openwrt
Код
Запросы
0
Пакеты
0
Релизы
0
CI/CD
Аналитика
Безопасность
master
package/kernel/linux/modules/usb.mk
1 860 строк
50 KB
Lech Perczak
kernel: kmod-usb-serial-mos7720: support parallel port in MCS7715
12 ноя 2023, 17:37
12 ноя 2023, 17:37
10b1301
Код
Авторство
О чём код?
# # Copyright (C) 2006-2014 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # USB_MENU:=USB Support USBNET_DIR:=net/usb USBHID_DIR?=hid/usbhid USBINPUT_DIR?=input/misc define KernelPackage/usb-core SUBMENU:=$(USB_MENU) TITLE:=Support for USB DEPENDS:=@USB_SUPPORT KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n FILES:= \ $(LINUX_DIR)/drivers/usb/core/usbcore.ko \ $(LINUX_DIR)/drivers/usb/common/usb-common.ko AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1) $(call AddDepends/nls) endef define KernelPackage/usb-core/description Kernel support for USB endef $(eval $(call KernelPackage,usb-core)) define AddDepends/usb SUBMENU:=$(USB_MENU) DEPENDS+=+kmod-usb-core $(1) endef define KernelPackage/usb-ledtrig-usbport TITLE:=LED trigger for USB ports KCONFIG:=CONFIG_USB_LEDS_TRIGGER_USBPORT FILES:=$(LINUX_DIR)/drivers/usb/core/ledtrig-usbport.ko AUTOLOAD:=$(call AutoLoad,50,ledtrig-usbport) $(call AddDepends/usb) endef define KernelPackage/usb-ledtrig-usbport/description This driver allows LEDs to be controlled by USB events. Enabling this trigger allows specifying list of USB ports that should turn on LED when some USB device gets connected. If possible it should be prefered over similar ledtrig-usbdev. endef $(eval $(call KernelPackage,usb-ledtrig-usbport)) define KernelPackage/usb-phy-nop TITLE:=Support for USB NOP transceiver KCONFIG:=CONFIG_NOP_USB_XCEIV HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-generic.ko AUTOLOAD:=$(call AutoLoad,21,phy-generic,1) $(call AddDepends/usb) endef define KernelPackage/usb-phy-nop/description Support for USB NOP transceiver endef $(eval $(call KernelPackage,usb-phy-nop)) define KernelPackage/phy-ath79-usb TITLE:=Support for ATH79 USB PHY KCONFIG:=CONFIG_PHY_AR7100_USB \ CONFIG_PHY_AR7200_USB DEPENDS:=@TARGET_ath79 HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/phy/phy-ar7100-usb.ko \ $(LINUX_DIR)/drivers/phy/phy-ar7200-usb.ko AUTOLOAD:=$(call AutoLoad,21,phy-ar7100-usb phy-ar7200-usb,1) $(call AddDepends/usb) endef define KernelPackage/phy-ath79-usb/description Support for ATH79 USB transceiver endef $(eval $(call KernelPackage,phy-ath79-usb)) define KernelPackage/usb-gadget TITLE:=USB Gadget support KCONFIG:=CONFIG_USB_GADGET HIDDEN:=1 FILES:=\ $(LINUX_DIR)/drivers/usb/gadget/udc/udc-core.ko AUTOLOAD:=$(call AutoLoad,21,udc-core,1) DEPENDS:=@USB_GADGET_SUPPORT $(call AddDepends/usb) endef define KernelPackage/usb-gadget/description Kernel support for USB Gadget mode endef $(eval $(call KernelPackage,usb-gadget)) define KernelPackage/usb-lib-composite TITLE:=USB lib composite KCONFIG:=CONFIG_USB_LIBCOMPOSITE DEPENDS:=+kmod-usb-gadget +kmod-fs-configfs HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/usb/gadget/libcomposite.ko AUTOLOAD:=$(call AutoLoad,50,libcomposite) $(call AddDepends/usb) endef define KernelPackage/usb-lib-composite/description Lib Composite endef $(eval $(call KernelPackage,usb-lib-composite)) define KernelPackage/usb-gadget-hid TITLE:=USB HID Gadget Support KCONFIG:=CONFIG_USB_G_HID DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite FILES:= \ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_hid.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_hid.ko AUTOLOAD:=$(call AutoLoad,52,usb_f_hid) $(call AddDepends/usb) endef define KernelPackage/usb-gadget-hid/description Kernel support for USB HID Gadget. endef $(eval $(call KernelPackage,usb-gadget-hid)) define KernelPackage/usb-gadget-ehci-debug TITLE:=USB EHCI debug port Gadget support KCONFIG:=\ CONFIG_USB_G_DBGP \ CONFIG_USB_G_DBGP_SERIAL=y \ CONFIG_USB_G_DBGP_PRINTK=n DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite +kmod-usb-gadget-serial FILES:=$(LINUX_DIR)/drivers/usb/gadget/legacy/g_dbgp.ko $(call AddDepends/usb) endef define KernelPackage/usb-gadget-ehci-debug/description Kernel support for USB EHCI debug port Gadget. endef $(eval $(call KernelPackage,usb-gadget-ehci-debug)) define KernelPackage/usb-gadget-eth TITLE:=USB Ethernet Gadget support KCONFIG:= \ CONFIG_USB_ETH \ CONFIG_USB_ETH_RNDIS=y \ CONFIG_USB_ETH_EEM=n DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite FILES:= \ $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm) $(call AddDepends/usb) endef define KernelPackage/usb-gadget-eth/description Kernel support for USB Ethernet Gadget endef $(eval $(call KernelPackage,usb-gadget-eth)) define KernelPackage/usb-gadget-ncm TITLE:=USB Network Control Model (NCM) Gadget support KCONFIG:=CONFIG_USB_G_NCM DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite \ +kmod-usb-gadget-eth FILES:= \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ncm.ko \ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ncm.ko AUTOLOAD:=$(call AutoLoad,52,usb_f_ncm) $(call AddDepends/usb) endef define KernelPackage/usb-gadget-ncm/description Kernel support for USB Network Control Model (NCM) Gadget endef $(eval $(call KernelPackage,usb-gadget-ncm)) define KernelPackage/usb-gadget-serial TITLE:=USB Serial Gadget support KCONFIG:=CONFIG_USB_G_SERIAL DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite FILES:= \ $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko AUTOLOAD:=$(call AutoLoad,52,usb_f_acm) $(call AddDepends/usb) endef define KernelPackage/usb-gadget-serial/description Kernel support for USB Serial Gadget. endef $(eval $(call KernelPackage,usb-gadget-serial)) define KernelPackage/usb-gadget-mass-storage TITLE:=USB Mass Storage support KCONFIG:=CONFIG_USB_MASS_STORAGE DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite FILES:= \ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_mass_storage.ko \ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_mass_storage.ko AUTOLOAD:=$(call AutoLoad,52,usb_f_mass_storage) $(call AddDepends/usb) endef define KernelPackage/usb-gadget-mass-storage/description Kernel support for USB Gadget Mass Storage endef $(eval $(call KernelPackage,usb-gadget-mass-storage)) define KernelPackage/usb-gadget-cdc-composite TITLE:= USB CDC Composite (Ethernet + ACM) KCONFIG:=CONFIG_USB_CDC_COMPOSITE DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite \ +kmod-usb-gadget-eth +kmod-usb-gadget-serial FILES:= $(LINUX_DIR)/drivers/usb/gadget/legacy/g_cdc.ko $(call AddDepends/usb) endef define KernelPackage/usb-gadget-cdc-composite/description Kernel support for the USB CDC Composite gadget. This appears as an ethernet + ACM serial gadget. endef $(eval $(call KernelPackage,usb-gadget-cdc-composite)) define KernelPackage/usb-uhci TITLE:=Support for UHCI controllers KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_UHCI_ALT \ CONFIG_USB_UHCI_HCD FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1) $(call AddDepends/usb) endef define KernelPackage/usb-uhci/description Kernel support for USB UHCI controllers endef $(eval $(call KernelPackage,usb-uhci,1)) define KernelPackage/usb-ohci TITLE:=Support for OHCI controllers DEPENDS:= \ +TARGET_bcm53xx:kmod-usb-bcma \ +TARGET_bcm47xx:kmod-usb-bcma \ +TARGET_bcm47xx:kmod-usb-ssb KCONFIG:= \ CONFIG_USB_OHCI \ CONFIG_USB_OHCI_HCD \ CONFIG_USB_OHCI_ATH79=y \ CONFIG_USB_OHCI_HCD_AT91=y \ CONFIG_USB_OHCI_BCM63XX=y \ CONFIG_USB_OCTEON_OHCI=y \ CONFIG_USB_OHCI_HCD_OMAP3=y \ CONFIG_USB_OHCI_HCD_PLATFORM=y FILES:= \ $(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko \ $(LINUX_DIR)/drivers/usb/host/ohci-platform.ko ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ohci-at91.ko),) FILES+=$(LINUX_DIR)/drivers/usb/host/ohci-at91.ko endif AUTOLOAD:=$(call AutoLoad,50,ohci-hcd ohci-platform ohci-at91,1) $(call AddDepends/usb) endef define KernelPackage/usb-ohci/description Kernel support for USB OHCI controllers endef $(eval $(call KernelPackage,usb-ohci,1)) define KernelPackage/usb-ohci-pci TITLE:=Support for PCI OHCI controllers DEPENDS:=@PCI_SUPPORT +kmod-usb-ohci KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_OHCI_HCD_PCI FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-pci.ko AUTOLOAD:=$(call AutoLoad,51,ohci-pci,1) $(call AddDepends/usb) endef define KernelPackage/usb-ohci-pci/description Kernel support for PCI OHCI controllers endef $(eval $(call KernelPackage,usb-ohci-pci)) define KernelPackage/usb-bcma TITLE:=Support for BCMA USB controllers DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx HIDDEN:=1 KCONFIG:=CONFIG_USB_HCD_BCMA FILES:= \ $(if $(CONFIG_USB_HCD_BCMA),$(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko) AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_BCMA),bcma-hcd),1) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usb-bcma)) define KernelPackage/usb-ssb TITLE:=Support for SSB USB controllers DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx HIDDEN:=1 KCONFIG:=CONFIG_USB_HCD_SSB FILES:= \ $(if $(CONFIG_USB_HCD_SSB),$(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko) AUTOLOAD:=$(call AutoLoad,19,$(if $(CONFIG_USB_HCD_SSB),ssb-hcd),1) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usb-ssb)) define KernelPackage/usb-ehci TITLE:=EHCI controller support HIDDEN:=1 KCONFIG:= \ CONFIG_USB_EHCI_HCD FILES:= \ $(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko AUTOLOAD:=$(call AutoLoad,35,ehci-hcd,1) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usb-ehci)) define KernelPackage/usb2 TITLE:=Support for USB2 controllers DEPENDS:=\ +TARGET_bcm47xx:kmod-usb-bcma \ +TARGET_bcm47xx:kmod-usb-ssb \ +TARGET_bcm53xx:kmod-usb-bcma \ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \ +TARGET_ath79:kmod-phy-ath79-usb \ +kmod-usb-ehci KCONFIG:=\ CONFIG_USB_EHCI_HCD_PLATFORM \ CONFIG_USB_EHCI_BCM63XX=y \ CONFIG_USB_IMX21_HCD=y \ CONFIG_USB_EHCI_MXC=y \ CONFIG_USB_OCTEON_EHCI=y \ CONFIG_USB_EHCI_HCD_ORION=y \ CONFIG_USB_EHCI_HCD_AT91=y \ CONFIG_USB_EHCI_FSL FILES:= \ $(LINUX_DIR)/drivers/usb/host/ehci-platform.ko ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-orion.ko),) FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-orion.ko endif ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko),) FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-atmel.ko endif ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko),) FILES+=$(LINUX_DIR)/drivers/usb/host/ehci-fsl.ko endif ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko),) FILES+=$(LINUX_DIR)/drivers/usb/host/fsl-mph-dr-of.ko endif AUTOLOAD:=$(call AutoLoad,40,ehci-hcd ehci-platform ehci-orion ehci-atmel ehci-fsl fsl-mph-dr-of,1) $(call AddDepends/usb) endef define KernelPackage/usb2/description Kernel support for USB2 (EHCI) controllers endef $(eval $(call KernelPackage,usb2)) define KernelPackage/usb2-pci TITLE:=Support for PCI USB2 controllers DEPENDS:=@PCI_SUPPORT +kmod-usb2 KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_EHCI_PCI FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-pci.ko AUTOLOAD:=$(call AutoLoad,42,ehci-pci,1) $(call AddDepends/usb) endef define KernelPackage/usb2-pci/description Kernel support for PCI USB2 (EHCI) controllers endef $(eval $(call KernelPackage,usb2-pci)) define KernelPackage/usb-dwc2 TITLE:=DWC2 USB controller driver DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget +kmod-usb-roles KCONFIG:= \ CONFIG_USB_DWC2 \ CONFIG_USB_DWC2_DEBUG=n \ CONFIG_USB_DWC2_VERBOSE=n \ CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n \ CONFIG_USB_DWC2_DEBUG_PERIODIC=n FILES:= \ $(LINUX_DIR)/drivers/usb/dwc2/dwc2.ko AUTOLOAD:=$(call AutoLoad,54,dwc2,1) $(call AddDepends/usb) endef define KernelPackage/usb-dwc2/description This driver provides USB Device Controller support for the Synopsys DesignWare USB OTG Core endef $(eval $(call KernelPackage,usb-dwc2)) define KernelPackage/usb-dwc2-pci TITLE:=DWC2 USB controller driver (PCI) DEPENDS:=@PCI_SUPPORT +kmod-usb-dwc2 +kmod-usb-phy-nop KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_DWC2_PCI FILES:= \ $(LINUX_DIR)/drivers/usb/dwc2/dwc2_pci.ko AUTOLOAD:=$(call AutoLoad,54,dwc2_pci,1) $(call AddDepends/usb) endef define KernelPackage/usb-dwc2-pci/description The Designware USB2.0 PCI interface module for controllers connected to a PCI bus. endef $(eval $(call KernelPackage,usb-dwc2-pci)) define KernelPackage/usb-dwc3 TITLE:=DWC3 USB controller driver KCONFIG:= \ CONFIG_USB_DWC3 \ CONFIG_USB_DWC3_HOST=y \ CONFIG_USB_DWC3_GADGET=n \ CONFIG_USB_DWC3_DUAL_ROLE=n \ CONFIG_USB_DWC3_DEBUG=n \ CONFIG_USB_DWC3_VERBOSE=n FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko AUTOLOAD:=$(call AutoLoad,54,dwc3,1) $(call AddDepends/usb) endef define KernelPackage/usb-dwc3/description This driver provides support for the Dual Role SuperSpeed USB Controller based on the Synopsys DesignWare USB3 IP Core endef $(eval $(call KernelPackage,usb-dwc3)) define KernelPackage/usb-dwc3-qcom TITLE:=DWC3 Qualcomm USB driver DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax) +kmod-usb-dwc3 KCONFIG:= CONFIG_USB_DWC3_QCOM FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1) $(call AddDepends/usb) endef define KernelPackage/usb-dwc3-qcom/description Some Qualcomm SoCs use DesignWare Core IP for USB2/3 functionality. This driver also handles Qscratch wrapper which is needed for peripheral mode support. endef $(eval $(call KernelPackage,usb-dwc3-qcom)) define KernelPackage/usb-acm TITLE:=Support for modems/isdn controllers KCONFIG:=CONFIG_USB_ACM FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko AUTOLOAD:=$(call AutoProbe,cdc-acm) $(call AddDepends/usb) endef define KernelPackage/usb-acm/description Kernel support for USB ACM devices (modems/isdn controllers) endef $(eval $(call KernelPackage,usb-acm)) define KernelPackage/usb-wdm TITLE:=USB Wireless Device Management KCONFIG:=CONFIG_USB_WDM FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-wdm.ko AUTOLOAD:=$(call AutoProbe,cdc-wdm) $(call AddDepends/usb) $(call AddDepends/usb-net) endef define KernelPackage/usb-wdm/description USB Wireless Device Management support endef $(eval $(call KernelPackage,usb-wdm)) define KernelPackage/usb-audio TITLE:=Support for USB audio devices KCONFIG:= \ CONFIG_SND_USB=y \ CONFIG_SND_USB_AUDIO $(call AddDepends/usb) $(call AddDepends/sound) FILES:= \ $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \ $(LINUX_DIR)/sound/usb/snd-usb-audio.ko AUTOLOAD:=$(call AutoProbe,snd-usbmidi-lib snd-usb-audio) endef define KernelPackage/usb-audio/description Kernel support for USB audio devices endef $(eval $(call KernelPackage,usb-audio)) define KernelPackage/usb-printer TITLE:=Support for printers KCONFIG:=CONFIG_USB_PRINTER FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko AUTOLOAD:=$(call AutoProbe,usblp) $(call AddDepends/usb) endef define KernelPackage/usb-printer/description Kernel support for USB printers endef $(eval $(call KernelPackage,usb-printer)) define KernelPackage/usb-serial TITLE:=Support for USB-to-Serial converters KCONFIG:=CONFIG_USB_SERIAL FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.ko AUTOLOAD:=$(call AutoProbe,usbserial) $(call AddDepends/usb) endef define KernelPackage/usb-serial/description Kernel support for USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial)) define AddDepends/usb-serial SUBMENU:=$(USB_MENU) DEPENDS+=+kmod-usb-serial $(1) endef define KernelPackage/usb-serial-belkin TITLE:=Support for Belkin devices KCONFIG:=CONFIG_USB_SERIAL_BELKIN FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.ko AUTOLOAD:=$(call AutoProbe,belkin_sa) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-belkin/description Kernel support for Belkin USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-belkin)) define KernelPackage/usb-serial-ch341 TITLE:=Support for CH341 devices KCONFIG:=CONFIG_USB_SERIAL_CH341 FILES:=$(LINUX_DIR)/drivers/usb/serial/ch341.ko AUTOLOAD:=$(call AutoProbe,ch341) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-ch341/description Kernel support for Winchiphead CH341 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-ch341)) define KernelPackage/usb-serial-edgeport TITLE:=Support for Digi Edgeport devices KCONFIG:=CONFIG_USB_SERIAL_EDGEPORT FILES:=$(LINUX_DIR)/drivers/usb/serial/io_edgeport.ko AUTOLOAD:=$(call AutoProbe,io_edgeport) $(call AddDepends/usb-serial) DEPENDS+=+edgeport-firmware endef define KernelPackage/usb-serial-edgeport/description Kernel support for Inside Out Networks (Digi) Edgeport/4 Rapidport/4 Edgeport/4t Edgeport/2 Edgeport/4i Edgeport/2i Edgeport/421 Edgeport/21 Edgeport/8 Edgeport/8 Dual Edgeport/2D8 Edgeport/4D8 Edgeport/8i Edgeport/2 DIN Edgeport/4 DIN Edgeport/16 Dual endef $(eval $(call KernelPackage,usb-serial-edgeport)) define KernelPackage/usb-serial-ftdi TITLE:=Support for FTDI devices KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.ko AUTOLOAD:=$(call AutoProbe,ftdi_sio) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-ftdi/description Kernel support for FTDI USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-ftdi)) define KernelPackage/usb-serial-garmin TITLE:=Support for Garmin GPS devices KCONFIG:=CONFIG_USB_SERIAL_GARMIN FILES:=$(LINUX_DIR)/drivers/usb/serial/garmin_gps.ko AUTOLOAD:=$(call AutoProbe,garmin_gps) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-garmin/description Should work with most Garmin GPS devices which have a native USB port. endef $(eval $(call KernelPackage,usb-serial-garmin)) define KernelPackage/usb-serial-simple TITLE:=USB Serial Simple (Motorola phone) KCONFIG:=CONFIG_USB_SERIAL_SIMPLE FILES:=$(LINUX_DIR)/drivers/usb/serial/usb-serial-simple.ko AUTOLOAD:=$(call AutoProbe,usb-serial-simple) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-simple/description Kernel support for "very simple devices". Specifically, it supports: - Suunto ANT+ USB device. - Medtronic CareLink USB device (3.18) - Fundamental Software dongle. - Google USB serial devices (3.19) - HP4x calculators - a number of Motorola phones - Novatel Wireless GPS receivers (3.18) - Siemens USB/MPI adapter. - ViVOtech ViVOpay USB device. - Infineon Modem Flashloader USB interface - ZIO Motherboard USB serial interface endef $(eval $(call KernelPackage,usb-serial-simple)) define KernelPackage/usb-serial-ti-usb TITLE:=Support for TI USB 3410/5052 KCONFIG:=CONFIG_USB_SERIAL_TI FILES:=$(LINUX_DIR)/drivers/usb/serial/ti_usb_3410_5052.ko AUTOLOAD:=$(call AutoProbe,ti_usb_3410_5052) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-ti-usb/description Kernel support for TI USB 3410/5052 devices endef $(eval $(call KernelPackage,usb-serial-ti-usb)) define KernelPackage/usb-serial-ipw TITLE:=Support for IPWireless 3G devices KCONFIG:=CONFIG_USB_SERIAL_IPW FILES:=$(LINUX_DIR)/drivers/usb/serial/ipw.ko AUTOLOAD:=$(call AutoProbe,ipw) $(call AddDepends/usb-serial,+kmod-usb-serial-wwan) endef $(eval $(call KernelPackage,usb-serial-ipw)) define KernelPackage/usb-serial-mct TITLE:=Support for Magic Control Tech. devices KCONFIG:=CONFIG_USB_SERIAL_MCT_U232 FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.ko AUTOLOAD:=$(call AutoProbe,mct_u232) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-mct/description Kernel support for Magic Control Technology USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-mct)) define KernelPackage/usb-serial-mos7720 TITLE:=Support for Moschip MOS7720 devices KCONFIG:=CONFIG_USB_SERIAL_MOS7720 CONFIG_USB_SERIAL_MOS7715_PARPORT=y FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7720.ko DEPENDS:=+kmod-ppdev AUTOLOAD:=$(call AutoProbe,mos7720) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-mos7720/description Kernel support for Moschip MOS7720 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-mos7720)) define KernelPackage/usb-serial-mos7840 TITLE:=Support for Moschip MOS7840 devices KCONFIG:=CONFIG_USB_SERIAL_MOS7840 FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7840.ko AUTOLOAD:=$(call AutoProbe,mos7840) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-mos7840/description Kernel support for Moschip MOS7840 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-mos7840)) define KernelPackage/usb-serial-pl2303 TITLE:=Support for Prolific PL2303 devices KCONFIG:=CONFIG_USB_SERIAL_PL2303 FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.ko AUTOLOAD:=$(call AutoProbe,pl2303) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-pl2303/description Kernel support for Prolific PL2303 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-pl2303)) define KernelPackage/usb-serial-cp210x TITLE:=Support for Silicon Labs cp210x devices KCONFIG:=CONFIG_USB_SERIAL_CP210X FILES:=$(LINUX_DIR)/drivers/usb/serial/cp210x.ko AUTOLOAD:=$(call AutoProbe,cp210x) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-cp210x/description Kernel support for Silicon Labs cp210x USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-cp210x)) define KernelPackage/usb-serial-ark3116 TITLE:=Support for ArkMicroChips ARK3116 devices KCONFIG:=CONFIG_USB_SERIAL_ARK3116 FILES:=$(LINUX_DIR)/drivers/usb/serial/ark3116.ko AUTOLOAD:=$(call AutoProbe,ark3116) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-ark3116/description Kernel support for ArkMicroChips ARK3116 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-ark3116)) define KernelPackage/usb-serial-oti6858 TITLE:=Support for Ours Technology OTI6858 devices KCONFIG:=CONFIG_USB_SERIAL_OTI6858 FILES:=$(LINUX_DIR)/drivers/usb/serial/oti6858.ko AUTOLOAD:=$(call AutoProbe,oti6858) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-oti6858/description Kernel support for Ours Technology OTI6858 USB-to-Serial converters endef $(eval $(call KernelPackage,usb-serial-oti6858)) define KernelPackage/usb-serial-sierrawireless TITLE:=Support for Sierra Wireless devices KCONFIG:=CONFIG_USB_SERIAL_SIERRAWIRELESS FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.ko AUTOLOAD:=$(call AutoProbe,sierra) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-sierrawireless/description Kernel support for Sierra Wireless devices endef $(eval $(call KernelPackage,usb-serial-sierrawireless)) define KernelPackage/usb-serial-visor TITLE:=Support for Handspring Visor devices KCONFIG:=CONFIG_USB_SERIAL_VISOR FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.ko AUTOLOAD:=$(call AutoProbe,visor) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-visor/description Kernel support for Handspring Visor PDAs endef $(eval $(call KernelPackage,usb-serial-visor)) define KernelPackage/usb-serial-cypress-m8 TITLE:=Support for CypressM8 USB-Serial KCONFIG:=CONFIG_USB_SERIAL_CYPRESS_M8 FILES:=$(LINUX_DIR)/drivers/usb/serial/cypress_m8.ko AUTOLOAD:=$(call AutoProbe,cypress_m8) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-cypress-m8/description Kernel support for devices with Cypress M8 USB to Serial chip (for example, the Delorme Earthmate LT-20 GPS) Supported microcontrollers in the CY4601 family are: CY7C63741 CY7C63742 CY7C63743 CY7C64013 endef $(eval $(call KernelPackage,usb-serial-cypress-m8)) define KernelPackage/usb-serial-keyspan TITLE:=Support for Keyspan USB-to-Serial devices KCONFIG:= \ CONFIG_USB_SERIAL_KEYSPAN \ CONFIG_USB_SERIAL_KEYSPAN_USA28 \ CONFIG_USB_SERIAL_KEYSPAN_USA28X \ CONFIG_USB_SERIAL_KEYSPAN_USA28XA \ CONFIG_USB_SERIAL_KEYSPAN_USA28XB \ CONFIG_USB_SERIAL_KEYSPAN_USA19 \ CONFIG_USB_SERIAL_KEYSPAN_USA18X \ CONFIG_USB_SERIAL_KEYSPAN_USA19W \ CONFIG_USB_SERIAL_KEYSPAN_USA19QW \ CONFIG_USB_SERIAL_KEYSPAN_USA19QI \ CONFIG_USB_SERIAL_KEYSPAN_MPR \ CONFIG_USB_SERIAL_KEYSPAN_USA49W \ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC FILES:= \ $(LINUX_DIR)/drivers/usb/serial/keyspan.ko \ $(wildcard $(LINUX_DIR)/drivers/usb/misc/ezusb.ko) AUTOLOAD:=$(call AutoProbe,ezusb keyspan) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-keyspan/description Kernel support for Keyspan USB-to-Serial devices endef $(eval $(call KernelPackage,usb-serial-keyspan)) define KernelPackage/usb-serial-wwan TITLE:=Support for GSM and CDMA modems KCONFIG:=CONFIG_USB_SERIAL_WWAN FILES:=$(LINUX_DIR)/drivers/usb/serial/usb_wwan.ko HIDDEN:=1 AUTOLOAD:=$(call AutoProbe,usb_wwan) $(call AddDepends/usb-serial) endef define KernelPackage/usb-serial-wwan/description Kernel support for USB GSM and CDMA modems endef $(eval $(call KernelPackage,usb-serial-wwan)) define KernelPackage/usb-serial-option TITLE:=Support for Option HSDPA modems KCONFIG:=CONFIG_USB_SERIAL_OPTION FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko AUTOLOAD:=$(call AutoProbe,option) $(call AddDepends/usb-serial,+kmod-usb-serial-wwan) endef define KernelPackage/usb-serial-option/description Kernel support for Option HSDPA modems endef $(eval $(call KernelPackage,usb-serial-option)) define KernelPackage/usb-serial-qualcomm TITLE:=Support for Qualcomm USB serial KCONFIG:=CONFIG_USB_SERIAL_QUALCOMM FILES:=$(LINUX_DIR)/drivers/usb/serial/qcserial.ko AUTOLOAD:=$(call AutoProbe,qcserial) $(call AddDepends/usb-serial,+kmod-usb-serial-wwan) endef define KernelPackage/usb-serial-qualcomm/description Kernel support for Qualcomm USB Serial devices (Gobi) endef $(eval $(call KernelPackage,usb-serial-qualcomm)) define KernelPackage/usb-storage TITLE:=USB Storage support DEPENDS:= +kmod-scsi-core KCONFIG:=CONFIG_USB_STORAGE FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko AUTOLOAD:=$(call AutoProbe,usb-storage,1) $(call AddDepends/usb) endef define KernelPackage/usb-storage/description Kernel support for USB Mass Storage devices endef $(eval $(call KernelPackage,usb-storage)) define KernelPackage/usb-storage-extras SUBMENU:=$(USB_MENU) TITLE:=Extra drivers for usb-storage DEPENDS:=+kmod-usb-storage KCONFIG:= \ CONFIG_USB_STORAGE_ALAUDA \ CONFIG_USB_STORAGE_CYPRESS_ATACB \ CONFIG_USB_STORAGE_DATAFAB \ CONFIG_USB_STORAGE_FREECOM \ CONFIG_USB_STORAGE_ISD200 \ CONFIG_USB_STORAGE_JUMPSHOT \ CONFIG_USB_STORAGE_KARMA \ CONFIG_USB_STORAGE_SDDR09 \ CONFIG_USB_STORAGE_SDDR55 \ CONFIG_USB_STORAGE_USBAT FILES:= \ $(LINUX_DIR)/drivers/usb/storage/ums-alauda.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-cypress.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-datafab.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-freecom.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-isd200.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-jumpshot.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-karma.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-sddr09.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-sddr55.ko \ $(LINUX_DIR)/drivers/usb/storage/ums-usbat.ko AUTOLOAD:=$(call AutoProbe,ums-alauda ums-cypress ums-datafab \ ums-freecom ums-isd200 ums-jumpshot \ ums-karma ums-sddr09 ums-sddr55 ums-usbat) endef define KernelPackage/usb-storage-extras/description Say Y here if you want to have some more drivers, such as for SmartMedia card readers endef $(eval $(call KernelPackage,usb-storage-extras)) define KernelPackage/usb-storage-uas SUBMENU:=$(USB_MENU) TITLE:=USB Attached SCSI (UASP) support DEPENDS:=+kmod-usb-storage KCONFIG:=CONFIG_USB_UAS FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko AUTOLOAD:=$(call AutoProbe,uas,1) endef define KernelPackage/usb-storage-uas/description Say Y here if you want to include support for USB Attached SCSI (UAS/UASP), a higher performance protocol available on many newer USB 3.0 storage devices endef $(eval $(call KernelPackage,usb-storage-uas)) define KernelPackage/usb-atm TITLE:=Support for ATM on USB bus DEPENDS:=+kmod-atm KCONFIG:=CONFIG_USB_ATM FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.ko AUTOLOAD:=$(call AutoProbe,usbatm) $(call AddDepends/usb) endef define KernelPackage/usb-atm/description Kernel support for USB DSL modems endef $(eval $(call KernelPackage,usb-atm)) define AddDepends/usb-atm SUBMENU:=$(USB_MENU) DEPENDS+=kmod-usb-atm $(1) endef define KernelPackage/usb-atm-speedtouch TITLE:=SpeedTouch USB ADSL modems support KCONFIG:=CONFIG_USB_SPEEDTOUCH FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.ko AUTOLOAD:=$(call AutoProbe,speedtch) $(call AddDepends/usb-atm) endef define KernelPackage/usb-atm-speedtouch/description Kernel support for SpeedTouch USB ADSL modems endef $(eval $(call KernelPackage,usb-atm-speedtouch)) define KernelPackage/usb-atm-ueagle TITLE:=Eagle 8051 based USB ADSL modems support FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.ko KCONFIG:=CONFIG_USB_UEAGLEATM AUTOLOAD:=$(call AutoProbe,ueagle-atm) $(call AddDepends/usb-atm) endef define KernelPackage/usb-atm-ueagle/description Kernel support for Eagle 8051 based USB ADSL modems endef $(eval $(call KernelPackage,usb-atm-ueagle)) define KernelPackage/usb-atm-cxacru TITLE:=cxacru FILES:=$(LINUX_DIR)/drivers/usb/atm/cxacru.ko KCONFIG:=CONFIG_USB_CXACRU AUTOLOAD:=$(call AutoProbe,cxacru) $(call AddDepends/usb-atm) endef define KernelPackage/usb-atm-cxacru/description Kernel support for cxacru based USB ADSL modems endef $(eval $(call KernelPackage,usb-atm-cxacru)) define KernelPackage/usb-net TITLE:=Kernel modules for USB-to-Ethernet convertors DEPENDS:=+kmod-mii KCONFIG:=CONFIG_USB_USBNET \ CONFIG_USB_NET_DRIVERS AUTOLOAD:=$(call AutoProbe,usbnet) FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko $(call AddDepends/usb) endef define KernelPackage/usb-net/description Kernel modules for USB-to-Ethernet convertors endef $(eval $(call KernelPackage,usb-net)) define AddDepends/usb-net SUBMENU:=$(USB_MENU) DEPENDS+=+kmod-usb-net $(1) endef define KernelPackage/usb-net-aqc111 TITLE:=Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE KCONFIG:=CONFIG_USB_NET_AQC111 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/aqc111.ko AUTOLOAD:=$(call AutoProbe,aqc111) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-aqc111/description Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE endef $(eval $(call KernelPackage,usb-net-aqc111)) define KernelPackage/usb-net-asix TITLE:=Kernel module for USB-to-Ethernet Asix convertors DEPENDS:= \ +kmod-libphy +kmod-net-selftests +kmod-mdio-devres +kmod-phy-ax88796b \ +LINUX_6_1:kmod-phylink KCONFIG:=CONFIG_USB_NET_AX8817X FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko AUTOLOAD:=$(call AutoProbe,asix) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-asix/description Kernel module for USB-to-Ethernet Asix convertors endef $(eval $(call KernelPackage,usb-net-asix)) define KernelPackage/usb-net-asix-ax88179 TITLE:=Kernel module for USB-to-Gigabit-Ethernet Asix convertors DEPENDS:=+kmod-libphy KCONFIG:=CONFIG_USB_NET_AX88179_178A FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/ax88179_178a.ko AUTOLOAD:=$(call AutoProbe,ax88179_178a) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-asix-ax88179/description Kernel module for USB-to-Ethernet ASIX AX88179 based USB 3.0/2.0 to Gigabit Ethernet adapters. endef $(eval $(call KernelPackage,usb-net-asix-ax88179)) define KernelPackage/usb-net-hso TITLE:=Kernel module for Option USB High Speed Mobile Devices KCONFIG:=CONFIG_USB_HSO FILES:= \ $(LINUX_DIR)/drivers/$(USBNET_DIR)/hso.ko AUTOLOAD:=$(call AutoProbe,hso) $(call AddDepends/usb-net) $(call AddDepends/rfkill) endef define KernelPackage/usb-net-hso/description Kernel module for Option USB High Speed Mobile Devices endef $(eval $(call KernelPackage,usb-net-hso)) define KernelPackage/usb-net-kaweth TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors KCONFIG:=CONFIG_USB_KAWETH FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.ko AUTOLOAD:=$(call AutoProbe,kaweth) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-kaweth/description Kernel module for USB-to-Ethernet Kaweth convertors endef $(eval $(call KernelPackage,usb-net-kaweth)) define KernelPackage/usb-net-lan78xx TITLE:=USB-To-Ethernet Microchip LAN78XX convertors DEPENDS:=+kmod-fixed-phy +kmod-phy-microchip +PACKAGE_kmod-of-mdio:kmod-of-mdio KCONFIG:=CONFIG_USB_LAN78XX FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/lan78xx.ko AUTOLOAD:=$(call AutoProbe,lan78xx) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-lan78xx/description Kernel module for Microchip LAN78XX based USB 2 & USB 3 10/100/1000 Ethernet adapters. endef $(eval $(call KernelPackage,usb-net-lan78xx)) define KernelPackage/usb-net-pegasus TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors KCONFIG:=CONFIG_USB_PEGASUS FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.ko AUTOLOAD:=$(call AutoProbe,pegasus) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-pegasus/description Kernel module for USB-to-Ethernet Pegasus convertors endef $(eval $(call KernelPackage,usb-net-pegasus)) define KernelPackage/usb-net-mcs7830 TITLE:=Kernel module for USB-to-Ethernet MCS7830 convertors KCONFIG:=CONFIG_USB_NET_MCS7830 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/mcs7830.ko AUTOLOAD:=$(call AutoProbe,mcs7830) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-mcs7830/description Kernel module for USB-to-Ethernet MCS7830 convertors endef $(eval $(call KernelPackage,usb-net-mcs7830)) define KernelPackage/usb-net-smsc75xx TITLE:=SMSC LAN75XX based USB 2.0 Gigabit ethernet devices DEPENDS:=+kmod-libphy KCONFIG:=CONFIG_USB_NET_SMSC75XX FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc75xx.ko AUTOLOAD:=$(call AutoProbe,smsc75xx) $(call AddDepends/usb-net, +kmod-lib-crc16) endef define KernelPackage/usb-net-smsc75xx/description Kernel module for SMSC LAN75XX based devices endef $(eval $(call KernelPackage,usb-net-smsc75xx)) define KernelPackage/usb-net-smsc95xx TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices DEPENDS:=+kmod-libphy +kmod-phy-smsc +LINUX_6_1:kmod-net-selftests KCONFIG:=CONFIG_USB_NET_SMSC95XX FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko AUTOLOAD:=$(call AutoProbe,smsc95xx) $(call AddDepends/usb-net, +kmod-lib-crc16) endef define KernelPackage/usb-net-smsc95xx/description Kernel module for SMSC LAN95XX based devices endef $(eval $(call KernelPackage,usb-net-smsc95xx)) define KernelPackage/usb-net-dm9601-ether TITLE:=Support for DM9601 ethernet connections KCONFIG:=CONFIG_USB_NET_DM9601 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/dm9601.ko AUTOLOAD:=$(call AutoProbe,dm9601) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-dm9601-ether/description Kernel support for USB DM9601 devices endef $(eval $(call KernelPackage,usb-net-dm9601-ether)) define KernelPackage/usb-net-cdc-ether TITLE:=Support for cdc ethernet connections KCONFIG:=CONFIG_USB_NET_CDCETHER FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ether.ko AUTOLOAD:=$(call AutoProbe,cdc_ether) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-cdc-ether/description Kernel support for USB CDC Ethernet devices endef $(eval $(call KernelPackage,usb-net-cdc-ether)) define KernelPackage/usb-net-cdc-eem TITLE:=Support for CDC EEM connections KCONFIG:=CONFIG_USB_NET_CDC_EEM FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_eem.ko AUTOLOAD:=$(call AutoProbe,cdc_eem) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-cdc-eem/description Kernel support for USB CDC EEM endef $(eval $(call KernelPackage,usb-net-cdc-eem)) define KernelPackage/usb-net-cdc-subset TITLE:=Support for CDC Ethernet subset connections KCONFIG:= \ CONFIG_USB_NET_CDC_SUBSET \ CONFIG_USB_ARMLINUX FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_subset.ko AUTOLOAD:=$(call AutoProbe,cdc_subset) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-cdc-subset/description Kernel support for Simple USB Network Links (CDC Ethernet subset) endef $(eval $(call KernelPackage,usb-net-cdc-subset)) define KernelPackage/usb-net-qmi-wwan TITLE:=QMI WWAN driver KCONFIG:=CONFIG_USB_NET_QMI_WWAN FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/qmi_wwan.ko AUTOLOAD:=$(call AutoProbe,qmi_wwan) $(call AddDepends/usb-net,+kmod-usb-wdm) endef define KernelPackage/usb-net-qmi-wwan/description QMI WWAN driver for Qualcomm MSM based 3G and LTE modems endef $(eval $(call KernelPackage,usb-net-qmi-wwan)) define KernelPackage/usb-net-rtl8150 TITLE:=Kernel module for USB-to-Ethernet Realtek convertors KCONFIG:=CONFIG_USB_RTL8150 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/rtl8150.ko AUTOLOAD:=$(call AutoProbe,rtl8150) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-rtl8150/description Kernel module for USB-to-Ethernet Realtek 8150 convertors endef $(eval $(call KernelPackage,usb-net-rtl8150)) define KernelPackage/usb-net-rtl8152 TITLE:=Kernel module for USB-to-Ethernet Realtek convertors DEPENDS:=+r8152-firmware +kmod-crypto-sha256 +kmod-usb-net-cdc-ncm KCONFIG:=CONFIG_USB_RTL8152 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko AUTOLOAD:=$(call AutoProbe,r8152) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-rtl8152/description Kernel module for USB-to-Ethernet Realtek 8152 USB2.0/3.0 convertors endef $(eval $(call KernelPackage,usb-net-rtl8152)) define KernelPackage/usb-net-sr9700 TITLE:=Support for CoreChip SR9700 ethernet devices KCONFIG:=CONFIG_USB_NET_SR9700 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/sr9700.ko AUTOLOAD:=$(call AutoProbe,sr9700) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-sr9700/description Kernel module for CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices endef $(eval $(call KernelPackage,usb-net-sr9700)) define KernelPackage/usb-net-rndis TITLE:=Support for RNDIS connections KCONFIG:=CONFIG_USB_NET_RNDIS_HOST FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/rndis_host.ko AUTOLOAD:=$(call AutoProbe,rndis_host) $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether) endef define KernelPackage/usb-net-rndis/description Kernel support for RNDIS connections endef $(eval $(call KernelPackage,usb-net-rndis)) define KernelPackage/usb-net-cdc-mbim SUBMENU:=$(USB_MENU) TITLE:=Kernel module for MBIM Devices KCONFIG:=CONFIG_USB_NET_CDC_MBIM FILES:= \ $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_mbim.ko AUTOLOAD:=$(call AutoProbe,cdc_mbim) $(call AddDepends/usb-net,+kmod-usb-wdm +kmod-usb-net-cdc-ncm) endef define KernelPackage/usb-net-cdc-mbim/description Kernel module for CDC MBIM (Mobile Broadband Interface Model) devices endef $(eval $(call KernelPackage,usb-net-cdc-mbim)) define KernelPackage/usb-net-cdc-ncm TITLE:=Support for CDC NCM connections KCONFIG:=CONFIG_USB_NET_CDC_NCM FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ncm.ko AUTOLOAD:=$(call AutoProbe,cdc_ncm) $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether) endef define KernelPackage/usb-net-cdc-ncm/description Kernel support for CDC NCM connections endef $(eval $(call KernelPackage,usb-net-cdc-ncm)) define KernelPackage/usb-net-huawei-cdc-ncm TITLE:=Support for Huawei CDC NCM connections KCONFIG:=CONFIG_USB_NET_HUAWEI_CDC_NCM FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/huawei_cdc_ncm.ko AUTOLOAD:=$(call AutoProbe,huawei_cdc_ncm) $(call AddDepends/usb-net,+kmod-usb-net-cdc-ncm +kmod-usb-wdm) endef define KernelPackage/usb-net-huawei-cdc-ncm/description Kernel support for Huawei CDC NCM connections endef $(eval $(call KernelPackage,usb-net-huawei-cdc-ncm)) define KernelPackage/usb-net-sierrawireless TITLE:=Support for Sierra Wireless devices KCONFIG:=CONFIG_USB_SIERRA_NET FILES:=$(LINUX_DIR)/drivers/net/usb/sierra_net.ko AUTOLOAD:=$(call AutoProbe,sierra_net) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-sierrawireless/description Kernel support for Sierra Wireless devices endef $(eval $(call KernelPackage,usb-net-sierrawireless)) define KernelPackage/usb-net-ipheth TITLE:=Apple iPhone USB Ethernet driver KCONFIG:=CONFIG_USB_IPHETH FILES:=$(LINUX_DIR)/drivers/net/usb/ipheth.ko AUTOLOAD:=$(call AutoProbe,ipheth) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-ipheth/description Kernel support for Apple iPhone USB Ethernet driver endef $(eval $(call KernelPackage,usb-net-ipheth)) define KernelPackage/usb-net-kalmia TITLE:=Samsung Kalmia based LTE USB modem KCONFIG:=CONFIG_USB_NET_KALMIA FILES:=$(LINUX_DIR)/drivers/net/usb/kalmia.ko AUTOLOAD:=$(call AutoProbe,kalmia) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-kalmia/description Kernel support for Samsung Kalmia based LTE USB modem endef $(eval $(call KernelPackage,usb-net-kalmia)) define KernelPackage/usb-net-pl TITLE:=Prolific PL-2301/2302/25A1 based cables KCONFIG:=CONFIG_USB_NET_PLUSB FILES:=$(LINUX_DIR)/drivers/net/usb/plusb.ko AUTOLOAD:=$(call AutoProbe,plusb) $(call AddDepends/usb-net) endef define KernelPackage/usb-net-pl/description Kernel support for Prolific PL-2301/2302/25A1 based cables endef $(eval $(call KernelPackage,usb-net-pl)) define KernelPackage/usb-hid TITLE:=Support for USB Human Input Devices KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID CONFIG_USB_HIDDEV=y DEPENDS:=+kmod-hid +kmod-hid-generic +kmod-input-evdev FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko AUTOLOAD:=$(call AutoProbe,usbhid) $(call AddDepends/usb) endef define KernelPackage/usb-hid/description Kernel support for USB HID devices such as keyboards and mice endef $(eval $(call KernelPackage,usb-hid)) define KernelPackage/usb-hid-cp2112 SUBMENU:=$(USB_MENU) TITLE:=Silicon Labs CP2112 HID USB to SMBus Master Bridge KCONFIG:=CONFIG_HID_CP2112 DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core FILES:=$(LINUX_DIR)/drivers/hid/hid-cp2112.ko AUTOLOAD:=$(call AutoProbe,hid-cp2112) endef define KernelPackage/usb-hid-cp2112/description HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the CP2112. endef $(eval $(call KernelPackage,usb-hid-cp2112)) define KernelPackage/usb-hid-mcp2221 SUBMENU:=$(USB_MENU) TITLE:=Microchip USB 2.0 to I2C/UART Protocol Converter with GPIO KCONFIG:=CONFIG_HID_MCP2221 DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core FILES:=$(LINUX_DIR)/drivers/hid/hid-mcp2221.ko AUTOLOAD:=$(call AutoProbe,hid-mcp2221) endef define KernelPackage/usb-hid-mcp2221/description HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the MCP2221. endef $(eval $(call KernelPackage,usb-hid-mcp2221)) define KernelPackage/usb-yealink TITLE:=USB Yealink VOIP phone DEPENDS:=+kmod-input-evdev KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko AUTOLOAD:=$(call AutoProbe,yealink) $(call AddDepends/usb) endef define KernelPackage/usb-yealink/description Kernel support for Yealink VOIP phone endef $(eval $(call KernelPackage,usb-yealink)) define KernelPackage/usb-cm109 TITLE:=Support for CM109 device DEPENDS:=+kmod-input-evdev KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko AUTOLOAD:=$(call AutoProbe,cm109) $(call AddDepends/usb) endef define KernelPackage/usb-cm109/description Kernel support for CM109 VOIP phone endef $(eval $(call KernelPackage,usb-cm109)) define KernelPackage/usb-test TITLE:=USB Testing Driver DEPENDS:=@DEVEL KCONFIG:=CONFIG_USB_TEST FILES:=$(LINUX_DIR)/drivers/usb/misc/usbtest.ko $(call AddDepends/usb) endef define KernelPackage/usb-test/description Kernel support for testing USB Host Controller software endef $(eval $(call KernelPackage,usb-test)) define KernelPackage/usbip TITLE := USB-over-IP kernel support KCONFIG:= \ CONFIG_USBIP_CORE \ CONFIG_USBIP_DEBUG=n FILES:=$(LINUX_DIR)/drivers/usb/usbip/usbip-core.ko AUTOLOAD:=$(call AutoProbe,usbip-core) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usbip)) define KernelPackage/usbip-client TITLE := USB-over-IP client driver DEPENDS := +kmod-usbip KCONFIG := CONFIG_USBIP_VHCI_HCD FILES :=$(LINUX_DIR)/drivers/usb/usbip/vhci-hcd.ko AUTOLOAD := $(call AutoProbe,vhci-hcd) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usbip-client)) define KernelPackage/usbip-server $(call KernelPackage/usbip/Default) TITLE := USB-over-IP host driver DEPENDS := +kmod-usbip KCONFIG := CONFIG_USBIP_HOST FILES :=$(LINUX_DIR)/drivers/usb/usbip/usbip-host.ko AUTOLOAD := $(call AutoProbe,usbip-host) $(call AddDepends/usb) endef $(eval $(call KernelPackage,usbip-server)) define KernelPackage/usb-chipidea TITLE:=Host and device support for Chipidea controllers DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles KCONFIG:= \ CONFIG_EXTCON \ CONFIG_USB_CHIPIDEA \ CONFIG_USB_CHIPIDEA_GENERIC \ CONFIG_USB_CHIPIDEA_HOST=y \ CONFIG_USB_CHIPIDEA_UDC=y \ CONFIG_USB_CHIPIDEA_DEBUG=y FILES:= \ $(LINUX_DIR)/drivers/extcon/extcon-core.ko \ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \ $(LINUX_DIR)/drivers/usb/common/ulpi.ko AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1) $(call AddDepends/usb) endef define KernelPackage/usb-chipidea/description Kernel support for USB Chipidea controllers endef $(eval $(call KernelPackage,usb-chipidea)) define KernelPackage/usb-chipidea2 TITLE:=Host and device support for Chipidea2 controllers DEPENDS:=+kmod-usb-chipidea KCONFIG:= \ CONFIG_EXTCON \ CONFIG_USB_CHIPIDEA \ CONFIG_USB_CHIPIDEA_HOST=y \ CONFIG_USB_CHIPIDEA_UDC=y \ CONFIG_USB_CHIPIDEA_DEBUG=y FILES:= \ $(LINUX_DIR)/drivers/extcon/extcon-core.ko \ $(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc_usb2.ko AUTOLOAD:=$(call AutoLoad,39,ci_hdrc_usb2,1) $(call AddDepends/usb) endef define KernelPackage/usb-chipidea2/description Kernel support for USB Chipidea controllers endef $(eval $(call KernelPackage,usb-chipidea2)) define KernelPackage/usbmon TITLE:=USB traffic monitor KCONFIG:=CONFIG_USB_MON $(call AddDepends/usb) FILES:=$(LINUX_DIR)/drivers/usb/mon/usbmon.ko AUTOLOAD:=$(call AutoProbe,usbmon) endef define KernelPackage/usbmon/description Kernel support for USB traffic monitoring endef $(eval $(call KernelPackage,usbmon)) XHCI_MODULES := xhci-pci xhci-plat-hcd XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES))) XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES)) define KernelPackage/usb3 TITLE:=Support for USB3 controllers DEPENDS:= \ +kmod-usb-xhci-hcd \ +TARGET_bcm53xx:kmod-usb-bcma \ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \ +TARGET_ramips_mt7621:kmod-usb-xhci-mtk \ +TARGET_mediatek:kmod-usb-xhci-mtk \ +TARGET_apm821xx_nand:kmod-usb-xhci-pci-renesas \ +TARGET_mvebu_cortexa9:kmod-usb-xhci-pci-renesas KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_XHCI_PCI \ CONFIG_USB_XHCI_PLATFORM FILES:= \ $(XHCI_FILES) AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1) $(call AddDepends/usb) endef define KernelPackage/usb3/description Kernel support for USB3 (XHCI) controllers endef $(eval $(call KernelPackage,usb3)) define KernelPackage/usb-net2280 TITLE:=Support for NetChip 228x PCI USB peripheral controller KCONFIG:= \ CONFIG_USB_PCI=y \ CONFIG_USB_NET2280 DEPENDS:=@PCI_SUPPORT +kmod-usb-gadget FILES:=$(LINUX_DIR)/drivers/usb/gadget/udc/net2280.ko AUTOLOAD:=$(call AutoLoad,46,net2280) $(call AddDepends/usb) endef define KernelPackage/usb-net2280/description Kernel support for NetChip 228x / PLX USB338x PCI USB peripheral controller. endef $(eval $(call KernelPackage,usb-net2280)) define KernelPackage/usb-roles TITLE:=USB Role Switch Library Module KCONFIG:=CONFIG_USB_ROLE_SWITCH HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/usb/roles/roles.ko $(call AddDepends/usb) endef define KernelPackage/usb-roles/description Support for USB Role Switch endef $(eval $(call KernelPackage,usb-roles)) define KernelPackage/usb-xhci-hcd TITLE:=xHCI HCD (USB 3.0) support KCONFIG:= \ CONFIG_USB_XHCI_HCD \ CONFIG_USB_XHCI_HCD_DEBUGGING=n HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1) $(call AddDepends/usb) endef define KernelPackage/usb-xhci-hcd/description The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. endef $(eval $(call KernelPackage,usb-xhci-hcd)) define KernelPackage/usb-xhci-mtk TITLE:=xHCI support for MediaTek SoCs DEPENDS:=+kmod-usb-xhci-hcd KCONFIG:=CONFIG_USB_XHCI_MTK HIDDEN:=1 FILES:= \ $(LINUX_DIR)/drivers/usb/host/xhci-mtk-hcd.ko AUTOLOAD:=$(call AutoLoad,54,xhci-mtk-hcd,1) $(call AddDepends/usb) endef define KernelPackage/usb-xhci-mtk/description Kernel support for the xHCI host controller found in MediaTek SoCs. endef $(eval $(call KernelPackage,usb-xhci-mtk)) define KernelPackage/usb-xhci-pci-renesas TITLE:=Support for additional Renesas xHCI controller with firmware KCONFIG:=CONFIG_USB_XHCI_PCI_RENESAS HIDDEN:=1 FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-pci-renesas.ko AUTOLOAD:=$(call AutoLoad,54,xhci-pci-renesas,1) $(call AddDepends/usb) endef define KernelPackage/usb-xhci-pci-renesas/description Kernel support for the Renesas xHCI controller with firmware. Make sure you have the firwmare for the device and installed on your system for this device to work. endef $(eval $(call KernelPackage,usb-xhci-pci-renesas)) define KernelPackage/chaoskey SUBMENU:=$(USB_MENU) TITLE:=Chaoskey hardware RNG support DEPENDS:=+kmod-random-core KCONFIG:=CONFIG_USB_CHAOSKEY FILES:=$(LINUX_DIR)/drivers/usb/misc/chaoskey.ko AUTOLOAD:=$(call AutoProbe,chaoskey) $(call AddDepends/usb) endef define KernelPackage/chaoskey/description Kernel module for chaoskey, USB attached true random number generator endef $(eval $(call KernelPackage,chaoskey))