examples/Parameter-Validation/Parameter-Validation.ino - master - SoRusV/esp32_https_server

examples/Parameter-Validation/Parameter-Validation.ino
274 строки9 KB
Frank Hessel
Modify interface to query parameters. Close #62. Close #63
05 дек 2019, 04:11
05 дек 2019, 04:112f50357
/**
 * Example for the ESP32 HTTP(S) Webserver
 *
 * IMPORTANT NOTE:
 * To run this script, you need to
 *  1) Enter your WiFi SSID and PSK below this comment
 *  2) Make sure to have certificate data available. You will find a
 *     shell script and instructions to do so in the library folder
 *     under extras/
 *
 * This script will install an HTTPS Server on your ESP32 with the following
 * functionalities:
 *  - Shows you a page with some LEDs and allow you to turn them on or off
 *    Parameters for the URLs are checked, so that you cannot address non-existing objects
 *  - 404 for everything else
 * If you want to see the LEDs, connect them to GPIOs 33 (red), 25 (yellow), 26 (green)
 * and 27 (blue).
 */

// TODO: Configure your WiFi here
#define WIFI_SSID "<your ssid goes here>"
#define WIFI_PSK  "<your pre-shared key goes here>"

// Include certificate data (see note above)
#include "cert.h"
#include "private_key.h"

// We will use wifi
#include <WiFi.h>

// We use strings
#include <string>

// Includes for the server
#include <HTTPSServer.hpp>
#include <SSLCert.hpp>
#include <HTTPRequest.hpp>
#include <HTTPResponse.hpp>
#include <ValidatorFunctions.hpp>

// The HTTPS Server comes in a separate namespace. For easier use, include it here.
using namespace httpsserver;

// Create an SSL certificate object from the files included above
SSLCert cert = SSLCert(
  example_crt_DER, example_crt_DER_len,
  example_key_DER, example_key_DER_len
);

// Create an SSL-enabled server that uses the certificate
// The contstructor takes some more parameters, but we go for default values here.
HTTPSServer secureServer = HTTPSServer(&cert);

// Root node, will show the LEDs that are available
void handleRoot(HTTPRequest * req, HTTPResponse * res);

// Node to switch an LED on or off
void handleSwitch(HTTPRequest * req, HTTPResponse * res);

// Validation function for the LED ID and state, explanation follows below.
bool validateLEDState(std::string s);
bool validateLEDID(std::string s);

// Default handler for resources that do not exist
void handle404(HTTPRequest * req, HTTPResponse * res);

// A class that defines an LED
class LED {
public:
  /** Name for the LED */
  const std::string _name;
  /** Pin that it's connected to */
  const uint8_t _pin;
  /** Current state */
  bool _on;
  /** Constructor */
  LED(const std::string name, uint8_t pin): _name(name), _pin(pin) {
    _on = false;
    pinMode(pin, OUTPUT);
  }
  /** Method to turn the led on or of */
  void setOn(bool on) {
    digitalWrite(_pin,on?HIGH:LOW);
    _on=on;
  }
};

// We create some LEDs:
#define LEDCOUNT 4
LED myLEDs[LEDCOUNT] = {
  LED("Red LED",    33),
  LED("Yellow LED", 25),
  LED("Green LED",  26),
  LED("Blue LED",   27)
};

void setup() {
  // For logging
  Serial.begin(115200);

  // Connect to WiFi
  Serial.println("Setting up WiFi");
  WiFi.begin(WIFI_SSID, WIFI_PSK);
  while (WiFi.status() != WL_CONNECTED) {
    Serial.print(".");
    delay(500);
  }
  Serial.print("Connected. IP=");
  Serial.println(WiFi.localIP());

  // We create a node for the main page of the server, available via get
  ResourceNode * nodeRoot     = new ResourceNode("/", "GET", &handleRoot);

  // This node will turn an LED on or of. It has two parameters:
  // 1) The ID of the LED (0..LEDCOUNT)
  // 2) The new state (0..1)
  // For more information on path parameters in general, see the Parameters example.
  ResourceNode * nodeSwitch = new ResourceNode("/led/*/*", "POST", &handleSwitch);

  // We want to use parameter validation. The ResourceNode class provides the method
  // addPathParamValidator() for that. This method takes two parameters:
  // 1) The index of the parameter that you want to validate, so for the first wildcard
  //    in the route pattern that has been specified above, it's 0, and for the second
  //    parameter it's 1.
  // 2) A function pointer that takes an std::string as parameter and returns a bool.
  //    That bool should be true if the parameter is considered valid.
  // All those functions are called in the order in that they have been added. So if
  // you want check if a parameter is an integer and then do some calculation with it,
  // make sure to add the integer-check first and the other function later.
  //
  // If any of the functions returns false, the URL is considered to be invalid completely.
  // In this case, the server will return with a static 400 Bad Request response.
  // 
  // For convenience, the ValidatorFunctions.hpp include file already provides some useful
  // and common checks (integer, non-empty, ...). Have a look at it before you start
  // implementing your own checks to save time!

  // First we will take care of the LED ID. This ID should be...
  // ... an unsigned integer ...
  nodeSwitch->addPathParamValidator(0, &validateUnsignedInteger);
  // ... and within the range of known IDs.
  // We can treat the parameter safely as integer in this validator, as all validators
  // are executed in order and validateUnsignedInteger has been run before.
  nodeSwitch->addPathParamValidator(0, &validateLEDID);

  // The second parameter should either be 0 or 1. We use our custom validateLEDState() validator for this:
  nodeSwitch->addPathParamValidator(1, &validateLEDState);

  // Not found node
  ResourceNode * node404 = new ResourceNode("", "GET", &handle404);

  // Add the root node to the server
  secureServer.registerNode(nodeRoot);
  // And the switch node
  secureServer.registerNode(nodeSwitch);

  // Add the 404 not found node to the server.
  // The path is ignored for the default node.
  secureServer.setDefaultNode(node404);

  Serial.println("Starting server...");
  secureServer.start();
  if (secureServer.isRunning()) {
    Serial.println("Server ready.");
  }
}

void loop() {
  // This call will let the server do its work
  secureServer.loop();

  // Other code would go here...
  delay(1);
}

void handleRoot(HTTPRequest * req, HTTPResponse * res) {
  // We will deliver an HTML page
  res->setHeader("Content-Type", "text/html");

  // Write the response page
  res->println("<!DOCTYPE html>");
  res->println("<html><head><style>");
  res->println("* {font-family: sans-serif; font-size:12px}");
  res->println("form.on {background: #ffffcc;color:black;}");
  res->println("form.off {background: #404040;color:white;}");
  res->println("</style><title>Parameter Validation Example</title></head>");
  res->println("<body>");

  // Iterate over the LEDs.
  for(int id = 0; id < LEDCOUNT; id++) {
    LED * led = &myLEDs[id];
    res->print(
      "<form "
      "style=\"border:1px solid black;padding:10px;width:300px;margin:10px;float:left\" "
      "method=\"post\" "
      "class=\"");
    res->print(led->_on ? "on" : "off");
    res->print(
      "\" "
      "action=\"/led/"
    );
    res->print(id);
    res->print("/");
    res->print(led->_on ? 0 : 1);
    res->print(
      "\">"
      "<p style=\"text-align:center;font-size:16px;\">"
    );
    res->printStd(led->_name);
    res->print("</p><button type=\"submit\">Turn ");
    res->print(led->_on ? "off" : "on");
    res->print("</button></form>");
  }

  res->print(
    "<form method=\"post\" action=\"/led/foobar/1\" style=\"clear:both\">"
    "<p>To see that the validator functions are working as expected, you can e.g. call <button type=\"submit\">POST /led/foobar/1</button>.</p>"
    "</form>"
    "</body>"
    "</html>"
  );
}

// This is the handler for our post callback. We can work with the parameters without further
// validation, as the server assures this function only gets called if the validation succeeded.
void handleSwitch(HTTPRequest * req, HTTPResponse * res) {
  // POST, so drain the input, if any
  req->discardRequestBody();

  // Get access to the parameters
  ResourceParameters * params = req->getParams();

  // Get the LED that is requested.
  // Note that we can call stoi safely without further validation, as we
  // defined that is has to be an unsigned integer and must not be >LEDCOUNT-1
  LED * led = &myLEDs[std::stoi(params->getPathParameter(0))];

  // Set the state of the LED. The value of the parameter can only be "0" or "1" here,
  // otherwise the server would not have called the handler.
  led->setOn(params->getPathParameter(1)!="0");

  // Redirect the user to the main page
  res->setStatusCode(303);
  // This should make the browser do a GET /
  res->setStatusText("See Other"); 
  res->setHeader("Location", "/");
  res->println("Redirecting...");
}

// This function is the validator for the second parameter of the POST /led route.
// It accepts only the strings "0" (off) and "1" (on)
bool validateLEDState(std::string s) {
  return s == "0" || s == "1";
}

// This function is a validator for the first parameter of the POST /led route.
// We did check before that the parameter is an integer, now we check its range.
bool validateLEDID(std::string s) {
  uint32_t id = std::stoul(s);
  return id < LEDCOUNT;
}

// For details to this function, see the Static-Page example
void handle404(HTTPRequest * req, HTTPResponse * res) {
  req->discardRequestBody();
  res->setStatusCode(404);
  res->setStatusText("Not Found");
  res->setHeader("Content-Type", "text/html");
  res->println("<!DOCTYPE html>");
  res->println("<html>");
  res->println("<head><title>Not Found</title></head>");
  res->println("<body><h1>404 Not Found</h1><p>The requested resource was not found on this server.</p></body>");
  res->println("</html>");
}