3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project.
6
# All text after a double hash (##) is considered a comment and is placed in
7
# front of the TAG it is preceding.
9
# All text after a single hash (#) is considered a comment and will be ignored.
11
# TAG = value [value, ...]
12
# For lists, items can also be appended using:
13
# TAG += value [value, ...]
14
# Values that contain spaces should be placed between quotes (\" \").
16
#---------------------------------------------------------------------------
17
# Project related configuration options
18
#---------------------------------------------------------------------------
20
# This tag specifies the encoding used for all characters in the config file
21
# that follow. The default is UTF-8 which is also the encoding used for all text
22
# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
23
# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
24
# for the list of possible encodings.
25
# The default value is: UTF-8.
27
DOXYFILE_ENCODING = UTF-8
29
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
30
# double-quotes, unless you are using Doxywizard) that should identify the
31
# project for which the documentation is generated. This name is used in the
32
# title of most generated pages and in a few other places.
33
# The default value is: My Project.
37
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
38
# could be handy for archiving the generated documentation or if some version
39
# control system is used.
43
# Using the PROJECT_BRIEF tag one can provide an optional one line description
44
# for a project that appears at the top of each page and should give viewer a
45
# quick idea about the purpose of the project. Keep the description short.
47
PROJECT_BRIEF = "Война в долине теней"
49
# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
50
# in the documentation. The maximum height of the logo should not exceed 55
51
# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
52
# the logo to the output directory.
56
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
57
# into which the generated documentation will be written. If a relative path is
58
# entered, it will be relative to the location where doxygen was started. If
59
# left blank the current directory will be used.
61
OUTPUT_DIRECTORY = ./doc
63
# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
64
# directories (in 2 levels) under the output directory of each output format and
65
# will distribute the generated files over these directories. Enabling this
66
# option can be useful when feeding doxygen a huge amount of source files, where
67
# putting all generated files in the same directory would otherwise causes
68
# performance problems for the file system.
69
# The default value is: NO.
73
# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
74
# characters to appear in the names of generated files. If set to NO, non-ASCII
75
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
77
# The default value is: NO.
79
ALLOW_UNICODE_NAMES = NO
81
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
82
# documentation generated by doxygen is written. Doxygen will use this
83
# information to generate all constant output in the proper language.
84
# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
85
# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
86
# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
87
# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
88
# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
89
# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
90
# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
91
# Ukrainian and Vietnamese.
92
# The default value is: English.
94
OUTPUT_LANGUAGE = Russian
96
# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
97
# descriptions after the members that are listed in the file and class
98
# documentation (similar to Javadoc). Set to NO to disable this.
99
# The default value is: YES.
101
BRIEF_MEMBER_DESC = YES
103
# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
104
# description of a member or function before the detailed description
106
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
107
# brief descriptions will be completely suppressed.
108
# The default value is: YES.
112
# This tag implements a quasi-intelligent brief description abbreviator that is
113
# used to form the text in various listings. Each string in this list, if found
114
# as the leading text of the brief description, will be stripped from the text
115
# and the result, after processing the whole list, is used as the annotated
116
# text. Otherwise, the brief description is used as-is. If left blank, the
117
# following values are used ($name is automatically replaced with the name of
118
# the entity):The $name class, The $name widget, The $name file, is, provides,
119
# specifies, contains, represents, a, an and the.
121
ABBREVIATE_BRIEF = "The $name class" \
133
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
134
# doxygen will generate a detailed section even if there is only a brief
136
# The default value is: NO.
138
ALWAYS_DETAILED_SEC = NO
140
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
141
# inherited members of a class in the documentation of that class as if those
142
# members were ordinary class members. Constructors, destructors and assignment
143
# operators of the base classes will not be shown.
144
# The default value is: NO.
146
INLINE_INHERITED_MEMB = NO
148
# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
149
# before files name in the file list and in the header files. If set to NO the
150
# shortest path that makes the file name unique will be used
151
# The default value is: YES.
155
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
156
# Stripping is only done if one of the specified strings matches the left-hand
157
# part of the path. The tag can be used to show relative paths in the file list.
158
# If left blank the directory from which doxygen is run is used as the path to
161
# Note that you can specify absolute paths here, but also relative paths, which
162
# will be relative from the directory where doxygen is started.
163
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
167
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
168
# path mentioned in the documentation of a class, which tells the reader which
169
# header file to include in order to use a class. If left blank only the name of
170
# the header file containing the class definition is used. Otherwise one should
171
# specify the list of include paths that are normally passed to the compiler
176
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
177
# less readable) file names. This can be useful is your file systems doesn't
178
# support long names like on DOS, Mac, or CD-ROM.
179
# The default value is: NO.
183
# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
184
# first line (until the first dot) of a Javadoc-style comment as the brief
185
# description. If set to NO, the Javadoc-style will behave just like regular Qt-
186
# style comments (thus requiring an explicit @brief command for a brief
188
# The default value is: NO.
190
JAVADOC_AUTOBRIEF = NO
192
# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
193
# line (until the first dot) of a Qt-style comment as the brief description. If
194
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
195
# requiring an explicit \brief command for a brief description.)
196
# The default value is: NO.
200
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
201
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
202
# a brief description. This used to be the default behavior. The new default is
203
# to treat a multi-line C++ comment block as a detailed description. Set this
204
# tag to YES if you prefer the old behavior instead.
206
# Note that setting this tag to YES also means that rational rose comments are
207
# not recognized any more.
208
# The default value is: NO.
210
MULTILINE_CPP_IS_BRIEF = NO
212
# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
213
# documentation from any documented member that it re-implements.
214
# The default value is: YES.
218
# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
219
# page for each member. If set to NO, the documentation of a member will be part
220
# of the file/class/namespace that contains it.
221
# The default value is: NO.
223
SEPARATE_MEMBER_PAGES = NO
225
# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
226
# uses this value to replace tabs by spaces in code fragments.
227
# Minimum value: 1, maximum value: 16, default value: 4.
231
# This tag can be used to specify a number of aliases that act as commands in
232
# the documentation. An alias has the form:
235
# "sideeffect=@par Side Effects:\n"
236
# will allow you to put the command \sideeffect (or @sideeffect) in the
237
# documentation, which will result in a user-defined paragraph with heading
238
# "Side Effects:". You can put \n's in the value part of an alias to insert
243
# This tag can be used to specify a number of word-keyword mappings (TCL only).
244
# A mapping has the form "name=value". For example adding "class=itcl::class"
245
# will allow you to use the command class in the itcl::class meaning.
249
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
250
# only. Doxygen will then generate output that is more tailored for C. For
251
# instance, some of the names that are used will be different. The list of all
252
# members will be omitted, etc.
253
# The default value is: NO.
255
OPTIMIZE_OUTPUT_FOR_C = NO
257
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
258
# Python sources only. Doxygen will then generate output that is more tailored
259
# for that language. For instance, namespaces will be presented as packages,
260
# qualified scopes will look different, etc.
261
# The default value is: NO.
263
OPTIMIZE_OUTPUT_JAVA = NO
265
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
266
# sources. Doxygen will then generate output that is tailored for Fortran.
267
# The default value is: NO.
269
OPTIMIZE_FOR_FORTRAN = NO
271
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
272
# sources. Doxygen will then generate output that is tailored for VHDL.
273
# The default value is: NO.
275
OPTIMIZE_OUTPUT_VHDL = NO
277
# Doxygen selects the parser to use depending on the extension of the files it
278
# parses. With this tag you can assign which parser to use for a given
279
# extension. Doxygen has a built-in mapping, but you can override or extend it
280
# using this tag. The format is ext=language, where ext is a file extension, and
281
# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
282
# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
283
# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
284
# Fortran. In the later case the parser tries to guess whether the code is fixed
285
# or free formatted code, this is the default for Fortran type files), VHDL. For
286
# instance to make doxygen treat .inc files as Fortran files (default is PHP),
287
# and .f files as C (default is Fortran), use: inc=Fortran f=C.
289
# Note: For files without extension you can use no_extension as a placeholder.
291
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
292
# the files are not read by doxygen.
294
EXTENSION_MAPPING = h=C++
296
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
297
# according to the Markdown format, which allows for more readable
298
# documentation. See http://daringfireball.net/projects/markdown/ for details.
299
# The output of markdown processing is further processed by doxygen, so you can
300
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
301
# case of backward compatibilities issues.
302
# The default value is: YES.
304
MARKDOWN_SUPPORT = YES
306
# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
307
# to that level are automatically included in the table of contents, even if
308
# they do not have an id attribute.
309
# Note: This feature currently applies only to Markdown headings.
310
# Minimum value: 0, maximum value: 99, default value: 0.
311
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
313
TOC_INCLUDE_HEADINGS = 0
315
# When enabled doxygen tries to link words that correspond to documented
316
# classes, or namespaces to their corresponding documentation. Such a link can
317
# be prevented in individual cases by putting a % sign in front of the word or
318
# globally by setting AUTOLINK_SUPPORT to NO.
319
# The default value is: YES.
321
AUTOLINK_SUPPORT = YES
323
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
324
# to include (a tag file for) the STL sources as input, then you should set this
325
# tag to YES in order to let doxygen match functions declarations and
326
# definitions whose arguments contain STL classes (e.g. func(std::string);
327
# versus func(std::string) {}). This also make the inheritance and collaboration328
# diagrams that involve STL classes more complete and accurate.
329
# The default value is: NO.
331
BUILTIN_STL_SUPPORT = YES
333
# If you use Microsoft's C++/CLI language, you should set this option to YES to
334
# enable parsing support.
335
# The default value is: NO.
339
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
340
# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
341
# will parse them like normal C++ but will assume all classes use public instead
342
# of private inheritance when no explicit protection keyword is present.
343
# The default value is: NO.
347
# For Microsoft's IDL there are propget and propput attributes to indicate
348
# getter and setter methods for a property. Setting this option to YES will make
349
# doxygen to replace the get and set methods by a property in the documentation.
350
# This will only work if the methods are indeed getting or setting a simple
351
# type. If this is not the case, or you want to show the methods anyway, you
352
# should set this option to NO.
353
# The default value is: YES.
355
IDL_PROPERTY_SUPPORT = YES
357
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
358
# tag is set to YES then doxygen will reuse the documentation of the first
359
# member in the group (if any) for the other members of the group. By default
360
# all members of a group must be documented explicitly.
361
# The default value is: NO.
363
DISTRIBUTE_GROUP_DOC = NO
365
# If one adds a struct or class to a group and this option is enabled, then also
366
# any nested class or struct is added to the same group. By default this option
367
# is disabled and one has to add nested compounds explicitly via \ingroup.
368
# The default value is: NO.
370
GROUP_NESTED_COMPOUNDS = NO
372
# Set the SUBGROUPING tag to YES to allow class member groups of the same type
373
# (for instance a group of public functions) to be put as a subgroup of that
374
# type (e.g. under the Public Functions section). Set it to NO to prevent
375
# subgrouping. Alternatively, this can be done per class using the
376
# \nosubgrouping command.
377
# The default value is: YES.
381
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
382
# are shown inside the group in which they are included (e.g. using \ingroup)
383
# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
386
# Note that this feature does not work in combination with
387
# SEPARATE_MEMBER_PAGES.
388
# The default value is: NO.
390
INLINE_GROUPED_CLASSES = NO
392
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
393
# with only public data fields or simple typedef fields will be shown inline in
394
# the documentation of the scope in which they are defined (i.e. file,
395
# namespace, or group documentation), provided this scope is documented. If set
396
# to NO, structs, classes, and unions are shown on a separate page (for HTML and
397
# Man pages) or section (for LaTeX and RTF).
398
# The default value is: NO.
400
INLINE_SIMPLE_STRUCTS = NO
402
# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
403
# enum is documented as struct, union, or enum with the name of the typedef. So
404
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct405
# with name TypeT. When disabled the typedef will appear as a member of a file,
406
# namespace, or class. And the struct will be named TypeS. This can typically be
407
# useful for C code in case the coding convention dictates that all compound
408
# types are typedef'ed and only the typedef is referenced, never the tag name.
409
# The default value is: NO.
411
TYPEDEF_HIDES_STRUCT = NO
413
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
414
# cache is used to resolve symbols given their name and scope. Since this can be
415
# an expensive process and often the same symbol appears multiple times in the
416
# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
417
# doxygen will become slower. If the cache is too large, memory is wasted. The
418
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
419
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
420
# symbols. At the end of a run doxygen will report the cache usage and suggest
421
# the optimal cache size from a speed point of view.
422
# Minimum value: 0, maximum value: 9, default value: 0.
426
#---------------------------------------------------------------------------
427
# Build related configuration options
428
#---------------------------------------------------------------------------
430
# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
431
# documentation are documented, even if no documentation was available. Private
432
# class members and static file members will be hidden unless the
433
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
434
# Note: This will also disable the warnings about undocumented members that are
435
# normally produced when WARNINGS is set to YES.
436
# The default value is: NO.
440
# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
441
# be included in the documentation.
442
# The default value is: NO.
446
# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
447
# scope will be included in the documentation.
448
# The default value is: NO.
452
# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
453
# included in the documentation.
454
# The default value is: NO.
458
# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
459
# locally in source files will be included in the documentation. If set to NO,
460
# only classes defined in header files are included. Does not have any effect
462
# The default value is: YES.
464
EXTRACT_LOCAL_CLASSES = YES
466
# This flag is only useful for Objective-C code. If set to YES, local methods,
467
# which are defined in the implementation section but not in the interface are
468
# included in the documentation. If set to NO, only methods in the interface are
470
# The default value is: NO.
472
EXTRACT_LOCAL_METHODS = NO
474
# If this flag is set to YES, the members of anonymous namespaces will be
475
# extracted and appear in the documentation as a namespace called
476
# 'anonymous_namespace{file}', where file will be replaced with the base name of477
# the file that contains the anonymous namespace. By default anonymous namespace
479
# The default value is: NO.
481
EXTRACT_ANON_NSPACES = NO
483
# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
484
# undocumented members inside documented classes or files. If set to NO these
485
# members will be included in the various overviews, but no documentation
486
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
487
# The default value is: NO.
489
HIDE_UNDOC_MEMBERS = NO
491
# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
492
# undocumented classes that are normally visible in the class hierarchy. If set
493
# to NO, these classes will be included in the various overviews. This option
494
# has no effect if EXTRACT_ALL is enabled.
495
# The default value is: NO.
497
HIDE_UNDOC_CLASSES = NO
499
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
500
# (class|struct|union) declarations. If set to NO, these declarations will be
501
# included in the documentation.
502
# The default value is: NO.
504
HIDE_FRIEND_COMPOUNDS = NO
506
# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
507
# documentation blocks found inside the body of a function. If set to NO, these
508
# blocks will be appended to the function's detailed documentation block.
509
# The default value is: NO.
511
HIDE_IN_BODY_DOCS = NO
513
# The INTERNAL_DOCS tag determines if documentation that is typed after a
514
# \internal command is included. If the tag is set to NO then the documentation
515
# will be excluded. Set it to YES to include the internal documentation.
516
# The default value is: NO.
520
# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
521
# names in lower-case letters. If set to YES, upper-case letters are also
522
# allowed. This is useful if you have classes or files whose names only differ
523
# in case and if your file system supports case sensitive file names. Windows
524
# and Mac users are advised to set this option to NO.
525
# The default value is: system dependent.
529
# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
530
# their full class and namespace scopes in the documentation. If set to YES, the
531
# scope will be hidden.
532
# The default value is: NO.
536
# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
537
# append additional text to a page's title, such as Class Reference. If set to
538
# YES the compound reference will be hidden.
539
# The default value is: NO.
541
HIDE_COMPOUND_REFERENCE= NO
543
# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
544
# the files that are included by a file in the documentation of that file.
545
# The default value is: YES.
547
SHOW_INCLUDE_FILES = YES
549
# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
550
# grouped member an include statement to the documentation, telling the reader
551
# which file to include in order to use the member.
552
# The default value is: NO.
554
SHOW_GROUPED_MEMB_INC = NO
556
# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
557
# files with double quotes in the documentation rather than with sharp brackets.
558
# The default value is: NO.
560
FORCE_LOCAL_INCLUDES = NO
562
# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
563
# documentation for inline members.
564
# The default value is: YES.
568
# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
569
# (detailed) documentation of file and class members alphabetically by member
570
# name. If set to NO, the members will appear in declaration order.
571
# The default value is: YES.
575
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
576
# descriptions of file, namespace and class members alphabetically by member
577
# name. If set to NO, the members will appear in declaration order. Note that
578
# this will also influence the order of the classes in the class list.
579
# The default value is: NO.
583
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
584
# (brief and detailed) documentation of class members so that constructors and
585
# destructors are listed first. If set to NO the constructors will appear in the
586
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
587
# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
588
# member documentation.
589
# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
590
# detailed member documentation.
591
# The default value is: NO.
593
SORT_MEMBERS_CTORS_1ST = NO
595
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
596
# of group names into alphabetical order. If set to NO the group names will
597
# appear in their defined order.
598
# The default value is: NO.
602
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
603
# fully-qualified names, including namespaces. If set to NO, the class list will
604
# be sorted only by class name, not including the namespace part.
605
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
606
# Note: This option applies only to the class list, not to the alphabetical
608
# The default value is: NO.
610
SORT_BY_SCOPE_NAME = NO
612
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
613
# type resolution of all parameters of a function it will reject a match between
614
# the prototype and the implementation of a member function even if there is
615
# only one candidate or it is obvious which candidate to choose by doing a
616
# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
617
# accept a match between prototype and implementation in such cases.
618
# The default value is: NO.
620
STRICT_PROTO_MATCHING = NO
622
# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
623
# list. This list is created by putting \todo commands in the documentation.
624
# The default value is: YES.
626
GENERATE_TODOLIST = YES
628
# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
629
# list. This list is created by putting \test commands in the documentation.
630
# The default value is: YES.
632
GENERATE_TESTLIST = YES
634
# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
635
# list. This list is created by putting \bug commands in the documentation.
636
# The default value is: YES.
638
GENERATE_BUGLIST = YES
640
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
641
# the deprecated list. This list is created by putting \deprecated commands in
643
# The default value is: YES.
645
GENERATE_DEPRECATEDLIST= YES
647
# The ENABLED_SECTIONS tag can be used to enable conditional documentation
648
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
649
# ... \endcond blocks.
653
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
654
# initial value of a variable or macro / define can have for it to appear in the
655
# documentation. If the initializer consists of more lines than specified here
656
# it will be hidden. Use a value of 0 to hide initializers completely. The
657
# appearance of the value of individual variables and macros / defines can be
658
# controlled using \showinitializer or \hideinitializer command in the
659
# documentation regardless of this setting.
660
# Minimum value: 0, maximum value: 10000, default value: 30.
662
MAX_INITIALIZER_LINES = 60
664
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
665
# the bottom of the documentation of classes and structs. If set to YES, the
666
# list will mention the files that were used to generate the documentation.
667
# The default value is: YES.
671
# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
672
# will remove the Files entry from the Quick Index and from the Folder Tree View
674
# The default value is: YES.
678
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
679
# page. This will remove the Namespaces entry from the Quick Index and from the
680
# Folder Tree View (if specified).
681
# The default value is: YES.
685
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
686
# doxygen should invoke to get the current version for each file (typically from
687
# the version control system). Doxygen will invoke the program by executing (via
688
# popen()) the command command input-file, where command is the value of the
689
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
690
# by doxygen. Whatever the program writes to standard output is used as the file
691
# version. For an example see the documentation.
695
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
696
# by doxygen. The layout file controls the global structure of the generated
697
# output files in an output format independent way. To create the layout file
698
# that represents doxygen's defaults, run doxygen with the -l option. You can
699
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
700
# will be used as the name of the layout file.
702
# Note that if you run doxygen from a directory containing a file called
703
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
708
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
709
# the reference definitions. This must be a list of .bib files. The .bib
710
# extension is automatically appended if omitted. This requires the bibtex tool
711
# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
712
# For LaTeX the style of the bibliography can be controlled using
713
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
714
# search path. See also \cite for info how to create references.
718
#---------------------------------------------------------------------------
719
# Configuration options related to warning and progress messages
720
#---------------------------------------------------------------------------
722
# The QUIET tag can be used to turn on/off the messages that are generated to
723
# standard output by doxygen. If QUIET is set to YES this implies that the
725
# The default value is: NO.
729
# The WARNINGS tag can be used to turn on/off the warning messages that are
730
# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
731
# this implies that the warnings are on.
733
# Tip: Turn warnings on while writing the documentation.
734
# The default value is: YES.
738
# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
739
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
740
# will automatically be disabled.
741
# The default value is: YES.
743
WARN_IF_UNDOCUMENTED = YES
745
# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
746
# potential errors in the documentation, such as not documenting some parameters
747
# in a documented function, or documenting parameters that don't exist or using
748
# markup commands wrongly.
749
# The default value is: YES.
751
WARN_IF_DOC_ERROR = YES
753
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
754
# are documented, but have no documentation for their parameters or return
755
# value. If set to NO, doxygen will only warn about wrong or incomplete
756
# parameter documentation, but not about the absence of documentation.
757
# The default value is: NO.
761
# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
762
# a warning is encountered.
763
# The default value is: NO.
767
# The WARN_FORMAT tag determines the format of the warning messages that doxygen
768
# can produce. The string should contain the $file, $line, and $text tags, which
769
# will be replaced by the file and line number from which the warning originated
770
# and the warning text. Optionally the format may contain $version, which will
771
# be replaced by the version of the file (if it could be obtained via
772
# FILE_VERSION_FILTER)
773
# The default value is: $file:$line: $text.
775
WARN_FORMAT = "$file:$line: $text"
777
# The WARN_LOGFILE tag can be used to specify a file to which warning and error
778
# messages should be written. If left blank the output is written to standard
783
#---------------------------------------------------------------------------
784
# Configuration options related to the input files
785
#---------------------------------------------------------------------------
787
# The INPUT tag is used to specify the files and/or directories that contain
788
# documented source files. You may enter file names like myfile.cpp or
789
# directories like /usr/src/myproject. Separate the files or directories with
790
# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
791
# Note: If this tag is empty the current directory is searched.
796
# This tag can be used to specify the character encoding of the source files
797
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
798
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
799
# documentation (see: http://www.gnu.org/software/libiconv) for the list of
801
# The default value is: UTF-8.
803
INPUT_ENCODING = UTF-8
805
# If the value of the INPUT tag contains directories, you can use the
806
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
807
# *.h) to filter out the source-files in the directories.
809
# Note that for custom extensions or not directly supported extensions you also
810
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
813
# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
814
# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
815
# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
816
# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
817
# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
864
# The RECURSIVE tag can be used to specify whether or not subdirectories should
865
# be searched for input files as well.
866
# The default value is: NO.
870
# The EXCLUDE tag can be used to specify files and/or directories that should be
871
# excluded from the INPUT source files. This way you can easily exclude a
872
# subdirectory from a directory tree whose root is specified with the INPUT tag.
874
# Note that relative paths are relative to the directory from which doxygen is
879
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
880
# directories that are symbolic links (a Unix file system feature) are excluded
882
# The default value is: NO.
886
# If the value of the INPUT tag contains directories, you can use the
887
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
888
# certain files from those directories.
890
# Note that the wildcards are matched against the file with absolute path, so to
891
# exclude all test directories for example use the pattern */test/*
895
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
896
# (namespaces, classes, functions, etc.) that should be excluded from the
897
# output. The symbol name can be a fully qualified name, a word, or if the
898
# wildcard * is used, a substring. Examples: ANamespace, AClass,
899
# AClass::ANamespace, ANamespace::*Test
901
# Note that the wildcards are matched against the file with absolute path, so to
902
# exclude all test directories use the pattern */test/*
906
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
907
# that contain example code fragments that are included (see the \include
912
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
913
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
914
# *.h) to filter out the source-files in the directories. If left blank all
919
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
920
# searched for input files to be used with the \include or \dontinclude commands
921
# irrespective of the value of the RECURSIVE tag.
922
# The default value is: NO.
924
EXAMPLE_RECURSIVE = NO
926
# The IMAGE_PATH tag can be used to specify one or more files or directories
927
# that contain images that are to be included in the documentation (see the
932
# The INPUT_FILTER tag can be used to specify a program that doxygen should
933
# invoke to filter for each input file. Doxygen will invoke the filter program
934
# by executing (via popen()) the command:
936
# <filter> <input-file>
938
# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
939
# name of an input file. Doxygen will then use the output that the filter
940
# program writes to standard output. If FILTER_PATTERNS is specified, this tag
943
# Note that the filter must not add or remove lines; it is applied before the
944
# code is scanned, but not when the output code is generated. If lines are added
945
# or removed, the anchors will not be placed correctly.
947
# Note that for custom extensions or not directly supported extensions you also
948
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
949
# properly processed by doxygen.
953
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
954
# basis. Doxygen will compare the file name with each pattern and apply the
955
# filter if there is a match. The filters are a list of the form: pattern=filter
956
# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
957
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
958
# patterns match the file name, INPUT_FILTER is applied.
960
# Note that for custom extensions or not directly supported extensions you also
961
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
962
# properly processed by doxygen.
966
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
967
# INPUT_FILTER) will also be used to filter the input files that are used for
968
# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
969
# The default value is: NO.
971
FILTER_SOURCE_FILES = NO
973
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
974
# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
975
# it is also possible to disable source filtering for a specific pattern using
976
# *.ext= (so without naming a filter).
977
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
979
FILTER_SOURCE_PATTERNS =
981
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
982
# is part of the input, its contents will be placed on the main page
983
# (index.html). This can be useful if you have a project on for instance GitHub
984
# and want to reuse the introductUML_LOOKUML_LOOKion page also for the doxygen output.
986
USE_MDFILE_AS_MAINPAGE = README.md
988
#---------------------------------------------------------------------------
989
# Configuration options related to source browsing
990
#---------------------------------------------------------------------------
992
# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
993
# generated. Documented entities will be cross-referenced with these sources.
995
# Note: To get rid of all source code in the generated output, make sure that
996
# also VERBATIM_HEADERS is set to NO.
997
# The default value is: NO.
1001
# Setting the INLINE_SOURCES tag to YES will include the body of functions,
1002
# classes and enums directly into the documentation.
1003
# The default value is: NO.
1007
# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
1008
# special comment blocks from generated source code fragments. Normal C, C++ and
1009
# Fortran comments will always remain visible.
1010
# The default value is: YES.
1012
STRIP_CODE_COMMENTS = YES
1014
# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
1015
# function all documented functions referencing it will be listed.
1016
# The default value is: NO.
1018
REFERENCED_BY_RELATION = NO
1020
# If the REFERENCES_RELATION tag is set to YES then for each documented function
1021
# all documented entities called/used by that function will be listed.
1022
# The default value is: NO.
1024
REFERENCES_RELATION = NO
1026
# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
1027
# to YES then the hyperlinks from functions in REFERENCES_RELATION and
1028
# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
1029
# link to the documentation.
1030
# The default value is: YES.
1032
REFERENCES_LINK_SOURCE = YES
1034
# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
1035
# source code will show a tooltip with additional information such as prototype,
1036
# brief description and links to the definition and documentation. Since this
1037
# will make the HTML file larger and loading of large files a bit slower, you
1038
# can opt to disable this feature.
1039
# The default value is: YES.
1040
# This tag requires that the tag SOURCE_BROWSER is set to YES.
1042
SOURCE_TOOLTIPS = YES
1044
# If the USE_HTAGS tag is set to YES then the references to source code will
1045
# point to the HTML generated by the htags(1) tool instead of doxygen built-in
1046
# source browser. The htags tool is part of GNU's global source tagging system
1047
# (see http://www.gnu.org/software/global/global.html). You will need version
1050
# To use it do the following:
1051
# - Install the latest version of global
1052
# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
1053
# - Make sure the INPUT points to the root of the source tree
1054
# - Run doxygen as normal
1056
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
1057
# tools must be available from the command line (i.e. in the search path).
1059
# The result: instead of the source browser generated by doxygen, the links to
1060
# source code will now point to the output of htags.
1061
# The default value is: NO.
1062
# This tag requires that the tag SOURCE_BROWSER is set to YES.
1066
# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
1067
# verbatim copy of the header file for each class for which an include is
1068
# specified. Set to NO to disable this.
1069
# See also: Section \class.
1070
# The default value is: YES.
1072
VERBATIM_HEADERS = YES
1074
# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
1075
# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
1076
# cost of reduced performance. This can be particularly helpful with template
1077
# rich C++ code for which doxygen's built-in parser lacks the necessary type
1079
# Note: The availability of this option depends on whether or not doxygen was
1080
# generated with the -Duse-libclang=ON option for CMake.
1081
# The default value is: NO.
1083
CLANG_ASSISTED_PARSING = NO
1085
# If clang assisted parsing is enabled you can provide the compiler with command
1086
# line options that you would normally use when invoking the compiler. Note that
1087
# the include paths will already be set by doxygen for the files and directories
1088
# specified with INPUT and INCLUDE_PATH.
1089
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
1093
#---------------------------------------------------------------------------
1094
# Configuration options related to the alphabetical class index
1095
#---------------------------------------------------------------------------
1097
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1098
# compounds will be generated. Enable this if the project contains a lot of
1099
# classes, structs, unions or interfaces.
1100
# The default value is: YES.
1102
ALPHABETICAL_INDEX = YES
1104
# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
1105
# which the alphabetical index list will be split.
1106
# Minimum value: 1, maximum value: 20, default value: 5.
1107
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1109
COLS_IN_ALPHA_INDEX = 5
1111
# In case all classes in a project start with a common prefix, all classes will
1112
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
1113
# can be used to specify a prefix (or a list of prefixes) that should be ignored
1114
# while generating the index headers.
1115
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1119
#---------------------------------------------------------------------------
1120
# Configuration options related to the HTML output
1121
#---------------------------------------------------------------------------
1123
# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1124
# The default value is: YES.
1128
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1129
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1131
# The default directory is: html.
1132
# This tag requires that the tag GENERATE_HTML is set to YES.
1136
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1137
# generated HTML page (for example: .htm, .php, .asp).
1138
# The default value is: .html.
1139
# This tag requires that the tag GENERATE_HTML is set to YES.
1141
HTML_FILE_EXTENSION = .html
1143
# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1144
# each generated HTML page. If the tag is left blank doxygen will generate a
1147
# To get valid HTML the header file that includes any scripts and style sheets
1148
# that doxygen needs, which is dependent on the configuration options used (e.g.
1149
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1150
# default header using
1151
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
1153
# and then modify the file new_header.html. See also section "Doxygen usage"
1154
# for information on how to generate the default header that doxygen normally
1156
# Note: The header is subject to change so you typically have to regenerate the
1157
# default header when upgrading to a newer version of doxygen. For a description
1158
# of the possible markers and block names see the documentation.
1159
# This tag requires that the tag GENERATE_HTML is set to YES.
1163
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1164
# generated HTML page. If the tag is left blank doxygen will generate a standard
1165
# footer. See HTML_HEADER for more information on how to generate a default
1166
# footer and what special commands can be used inside the footer. See also
1167
# section "Doxygen usage" for information on how to generate the default footer
1168
# that doxygen normally uses.
1169
# This tag requires that the tag GENERATE_HTML is set to YES.
1173
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1174
# sheet that is used by each HTML page. It can be used to fine-tune the look of
1175
# the HTML output. If left blank doxygen will generate a default style sheet.
1176
# See also section "Doxygen usage" for information on how to generate the style
1177
# sheet that doxygen normally uses.
1178
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1179
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
1181
# This tag requires that the tag GENERATE_HTML is set to YES.
1185
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1186
# cascading style sheets that are included after the standard style sheets
1187
# created by doxygen. Using this option one can overrule certain style aspects.
1188
# This is preferred over using HTML_STYLESHEET since it does not replace the
1189
# standard style sheet and is therefore more robust against future updates.
1190
# Doxygen will copy the style sheet files to the output directory.
1191
# Note: The order of the extra style sheet files is of importance (e.g. the last
1192
# style sheet in the list overrules the setting of the previous ones in the
1193
# list). For an example see the documentation.
1194
# This tag requires that the tag GENERATE_HTML is set to YES.
1196
HTML_EXTRA_STYLESHEET =
1198
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1199
# other source files which should be copied to the HTML output directory. Note
1200
# that these files will be copied to the base HTML output directory. Use the
1201
# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1202
# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1203
# files will be copied as-is; there are no commands or markers available.
1204
# This tag requires that the tag GENERATE_HTML is set to YES.
1208
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
1209
# will adjust the colors in the style sheet and background images according to
1210
# this color. Hue is specified as an angle on a colorwheel, see
1211
# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
1212
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
1213
# purple, and 360 is red again.
1214
# Minimum value: 0, maximum value: 359, default value: 220.
1215
# This tag requires that the tag GENERATE_HTML is set to YES.
1217
HTML_COLORSTYLE_HUE = 220
1219
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
1220
# in the HTML output. For a value of 0 the output will use grayscales only. A
1221
# value of 255 will produce the most vivid colors.
1222
# Minimum value: 0, maximum value: 255, default value: 100.
1223
# This tag requires that the tag GENERATE_HTML is set to YES.
1225
HTML_COLORSTYLE_SAT = 100
1227
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1228
# luminance component of the colors in the HTML output. Values below 100
1229
# gradually make the output lighter, whereas values above 100 make the output
1230
# darker. The value divided by 100 is the actual gamma applied, so 80 represents
1231
# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
1233
# Minimum value: 40, maximum value: 240, default value: 80.
1234
# This tag requires that the tag GENERATE_HTML is set to YES.
1236
HTML_COLORSTYLE_GAMMA = 80
1238
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1239
# page will contain the date and time when the page was generated. Setting this
1240
# to YES can help to show when doxygen was last run and thus if the
1241
# documentation is up to date.
1242
# The default value is: NO.
1243
# This tag requires that the tag GENERATE_HTML is set to YES.
1247
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1248
# documentation will contain sections that can be hidden and shown after the
1250
# The default value is: NO.
1251
# This tag requires that the tag GENERATE_HTML is set to YES.
1253
HTML_DYNAMIC_SECTIONS = NO
1255
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
1256
# shown in the various tree structured indices initially; the user can expand
1257
# and collapse entries dynamically later on. Doxygen will expand the tree to
1258
# such a level that at most the specified number of entries are visible (unless
1259
# a fully collapsed tree already exceeds this amount). So setting the number of
1260
# entries 1 will produce a full collapsed tree by default. 0 is a special value
1261
# representing an infinite number of entries and will result in a full expanded
1263
# Minimum value: 0, maximum value: 9999, default value: 100.
1264
# This tag requires that the tag GENERATE_HTML is set to YES.
1266
HTML_INDEX_NUM_ENTRIES = 100
1268
# If the GENERATE_DOCSET tag is set to YES, additional index files will be
1269
# generated that can be used as input for Apple's Xcode 3 integrated development
1270
# environment (see: http://developer.apple.com/tools/xcode/), introduced with
1271
# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
1272
# Makefile in the HTML output directory. Running make will produce the docset in
1273
# that directory and running make install will install the docset in
1274
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
1275
# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1276
# for more information.
1277
# The default value is: NO.
1278
# This tag requires that the tag GENERATE_HTML is set to YES.
1282
# This tag determines the name of the docset feed. A documentation feed provides
1283
# an umbrella under which multiple documentation sets from a single provider
1284
# (such as a company or product suite) can be grouped.
1285
# The default value is: Doxygen generated docs.
1286
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1288
DOCSET_FEEDNAME = "Doxygen generated docs"
1290
# This tag specifies a string that should uniquely identify the documentation
1291
# set bundle. This should be a reverse domain-name style string, e.g.
1292
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1293
# The default value is: org.doxygen.Project.
1294
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1296
DOCSET_BUNDLE_ID = org.doxygen.Project
1298
# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
1299
# the documentation publisher. This should be a reverse domain-name style
1300
# string, e.g. com.mycompany.MyDocSet.documentation.
1301
# The default value is: org.doxygen.Publisher.
1302
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1304
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1306
# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
1307
# The default value is: Publisher.
1308
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1310
DOCSET_PUBLISHER_NAME = Publisher
1312
# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1313
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1314
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
1315
# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
1318
# The HTML Help Workshop contains a compiler that can convert all HTML output
1319
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1320
# files are now used as the Windows 98 help format, and will replace the old
1321
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
1322
# HTML files also contain an index, a table of contents, and you can search for
1323
# words in the documentation. The HTML workshop also contains a viewer for
1324
# compressed HTML files.
1325
# The default value is: NO.
1326
# This tag requires that the tag GENERATE_HTML is set to YES.
1328
GENERATE_HTMLHELP = NO
1330
# The CHM_FILE tag can be used to specify the file name of the resulting .chm
1331
# file. You can add a path in front of the file if the result should not be
1332
# written to the html output directory.
1333
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1337
# The HHC_LOCATION tag can be used to specify the location (absolute path
1338
# including file name) of the HTML help compiler (hhc.exe). If non-empty,
1339
# doxygen will try to run the HTML help compiler on the generated index.hhp.
1340
# The file has to be specified with full path.
1341
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1345
# The GENERATE_CHI flag controls if a separate .chi index file is generated
1346
# (YES) or that it should be included in the master .chm file (NO).
1347
# The default value is: NO.
1348
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1352
# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
1353
# and project file content.
1354
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1358
# The BINARY_TOC flag controls whether a binary table of contents is generated
1359
# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
1360
# enables the Previous and Next buttons.
1361
# The default value is: NO.
1362
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1366
# The TOC_EXPAND flag can be set to YES to add extra items for group members to
1367
# the table of contents of the HTML help documentation and to the tree view.
1368
# The default value is: NO.
1369
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1373
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1374
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
1375
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1376
# (.qch) of the generated HTML documentation.
1377
# The default value is: NO.
1378
# This tag requires that the tag GENERATE_HTML is set to YES.
1382
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1383
# the file name of the resulting .qch file. The path specified is relative to
1384
# the HTML output folder.
1385
# This tag requires that the tag GENERATE_QHP is set to YES.
1389
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1390
# Project output. For more information please see Qt Help Project / Namespace
1391
# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
1392
# The default value is: org.doxygen.Project.
1393
# This tag requires that the tag GENERATE_QHP is set to YES.
1395
QHP_NAMESPACE = org.doxygen.Project
1397
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1398
# Help Project output. For more information please see Qt Help Project / Virtual
1399
# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
1401
# The default value is: doc.
1402
# This tag requires that the tag GENERATE_QHP is set to YES.
1404
QHP_VIRTUAL_FOLDER = doc
1406
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
1407
# filter to add. For more information please see Qt Help Project / Custom
1408
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1410
# This tag requires that the tag GENERATE_QHP is set to YES.
1412
QHP_CUST_FILTER_NAME =
1414
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
1415
# custom filter to add. For more information please see Qt Help Project / Custom
1416
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1418
# This tag requires that the tag GENERATE_QHP is set to YES.
1420
QHP_CUST_FILTER_ATTRS =
1422
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1423
# project's filter section matches. Qt Help Project / Filter Attributes (see:
1424
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
1425
# This tag requires that the tag GENERATE_QHP is set to YES.
1427
QHP_SECT_FILTER_ATTRS =
1429
# The QHG_LOCATION tag can be used to specify the location of Qt's
1430
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
1431
# generated .qhp file.
1432
# This tag requires that the tag GENERATE_QHP is set to YES.
1436
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1437
# generated, together with the HTML files, they form an Eclipse help plugin. To
1438
# install this plugin and make it available under the help contents menu in
1439
# Eclipse, the contents of the directory containing the HTML and XML files needs
1440
# to be copied into the plugins directory of eclipse. The name of the directory
1441
# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
1442
# After copying Eclipse needs to be restarted before the help appears.
1443
# The default value is: NO.
1444
# This tag requires that the tag GENERATE_HTML is set to YES.
1446
GENERATE_ECLIPSEHELP = NO
1448
# A unique identifier for the Eclipse help plugin. When installing the plugin
1449
# the directory name containing the HTML and XML files should also have this
1450
# name. Each documentation set should have its own identifier.
1451
# The default value is: org.doxygen.Project.
1452
# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1454
ECLIPSE_DOC_ID = org.doxygen.Project
1456
# If you want full control over the layout of the generated HTML pages it might
1457
# be necessary to disable the index and replace it with your own. The
1458
# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1459
# of each HTML page. A value of NO enables the index and the value YES disables
1460
# it. Since the tabs in the index contain the same information as the navigation
1461
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1462
# The default value is: NO.
1463
# This tag requires that the tag GENERATE_HTML is set to YES.
1467
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1468
# structure should be generated to display hierarchical information. If the tag
1469
# value is set to YES, a side panel will be generated containing a tree-like
1470
# index structure (just like the one that is generated for HTML Help). For this
1471
# to work a browser that supports JavaScript, DHTML, CSS and frames is required
1472
# (i.e. any modern browser). Windows users are probably better off using the
1473
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
1474
# further fine-tune the look of the index. As an example, the default style
1475
# sheet generated by doxygen has an example that shows how to put an image at
1476
# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
1477
# the same information as the tab index, you could consider setting
1478
# DISABLE_INDEX to YES when enabling this option.
1479
# The default value is: NO.
1480
# This tag requires that the tag GENERATE_HTML is set to YES.
1482
GENERATE_TREEVIEW = NO
1484
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1485
# doxygen will group on one line in the generated HTML documentation.
1487
# Note that a value of 0 will completely suppress the enum values from appearing
1488
# in the overview section.
1489
# Minimum value: 0, maximum value: 20, default value: 4.
1490
# This tag requires that the tag GENERATE_HTML is set to YES.
1492
ENUM_VALUES_PER_LINE = 4
1494
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
1495
# to set the initial width (in pixels) of the frame in which the tree is shown.
1496
# Minimum value: 0, maximum value: 1500, default value: 250.
1497
# This tag requires that the tag GENERATE_HTML is set to YES.
1501
# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1502
# external symbols imported via tag files in a separate window.
1503
# The default value is: NO.
1504
# This tag requires that the tag GENERATE_HTML is set to YES.
1506
EXT_LINKS_IN_WINDOW = NO
1508
# Use this tag to change the font size of LaTeX formulas included as images in
1509
# the HTML documentation. When you change the font size after a successful
1510
# doxygen run you need to manually remove any form_*.png images from the HTML
1511
# output directory to force them to be regenerated.
1512
# Minimum value: 8, maximum value: 50, default value: 10.
1513
# This tag requires that the tag GENERATE_HTML is set to YES.
1515
FORMULA_FONTSIZE = 10
1517
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1518
# generated for formulas are transparent PNGs. Transparent PNGs are not
1519
# supported properly for IE 6.0, but are supported on all modern browsers.
1521
# Note that when changing this option you need to delete any form_*.png files in
1522
# the HTML output directory before the changes have effect.
1523
# The default value is: YES.
1524
# This tag requires that the tag GENERATE_HTML is set to YES.
1526
FORMULA_TRANSPARENT = YES
1528
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1529
# http://www.mathjax.org) which uses client side Javascript for the rendering
1530
# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
1531
# installed or if you want to formulas look prettier in the HTML output. When
1532
# enabled you may also need to install MathJax separately and configure the path
1533
# to it using the MATHJAX_RELPATH option.
1534
# The default value is: NO.
1535
# This tag requires that the tag GENERATE_HTML is set to YES.
1539
# When MathJax is enabled you can set the default output format to be used for
1540
# the MathJax output. See the MathJax site (see:
1541
# http://docs.mathjax.org/en/latest/output.html) for more details.
1542
# Possible values are: HTML-CSS (which is slower, but has the best
1543
# compatibility), NativeMML (i.e. MathML) and SVG.
1544
# The default value is: HTML-CSS.
1545
# This tag requires that the tag USE_MATHJAX is set to YES.
1547
MATHJAX_FORMAT = HTML-CSS
1549
# When MathJax is enabled you need to specify the location relative to the HTML
1550
# output directory using the MATHJAX_RELPATH option. The destination directory
1551
# should contain the MathJax.js script. For instance, if the mathjax directory
1552
# is located at the same level as the HTML output directory, then
1553
# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1554
# Content Delivery Network so you can quickly see the result without installing
1555
# MathJax. However, it is strongly recommended to install a local copy of
1556
# MathJax from http://www.mathjax.org before deployment.
1557
# The default value is: http://cdn.mathjax.org/mathjax/latest.
1558
# This tag requires that the tag USE_MATHJAX is set to YES.
1560
MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1562
# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1563
# extension names that should be enabled during MathJax rendering. For example
1564
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
1565
# This tag requires that the tag USE_MATHJAX is set to YES.
1569
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1570
# of code that will be used on startup of the MathJax code. See the MathJax site
1571
# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
1572
# example see the documentation.
1573
# This tag requires that the tag USE_MATHJAX is set to YES.
1577
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1578
# the HTML output. The underlying search engine uses javascript and DHTML and
1579
# should work on any modern browser. Note that when using HTML help
1580
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
1581
# there is already a search function so this one should typically be disabled.
1582
# For large projects the javascript based search engine can be slow, then
1583
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1584
# search using the keyboard; to jump to the search box use <access key> + S
1585
# (what the <access key> is depends on the OS and browser, but it is typically
1586
# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
1587
# key> to jump into the search results window, the results can be navigated
1588
# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
1589
# the search. The filter options can be selected when the cursor is inside the
1590
# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
1591
# to select a filter and <Enter> or <escape> to activate or cancel the filter
1593
# The default value is: YES.
1594
# This tag requires that the tag GENERATE_HTML is set to YES.
1598
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1599
# implemented using a web server instead of a web client using Javascript. There
1600
# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
1601
# setting. When disabled, doxygen will generate a PHP script for searching and
1602
# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
1603
# and searching needs to be provided by external tools. See the section
1604
# "External Indexing and Searching" for details.
1605
# The default value is: NO.
1606
# This tag requires that the tag SEARCHENGINE is set to YES.
1608
SERVER_BASED_SEARCH = NO
1610
# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
1611
# script for searching. Instead the search results are written to an XML file
1612
# which needs to be processed by an external indexer. Doxygen will invoke an
1613
# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
1616
# Doxygen ships with an example indexer (doxyindexer) and search engine
1617
# (doxysearch.cgi) which are based on the open source search engine library
1618
# Xapian (see: http://xapian.org/).
1620
# See the section "External Indexing and Searching" for details.
1621
# The default value is: NO.
1622
# This tag requires that the tag SEARCHENGINE is set to YES.
1626
# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1627
# which will return the search results when EXTERNAL_SEARCH is enabled.
1629
# Doxygen ships with an example indexer (doxyindexer) and search engine
1630
# (doxysearch.cgi) which are based on the open source search engine library
1631
# Xapian (see: http://xapian.org/). See the section "External Indexing and
1632
# Searching" for details.
1633
# This tag requires that the tag SEARCHENGINE is set to YES.
1637
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1638
# search data is written to a file for indexing by an external tool. With the
1639
# SEARCHDATA_FILE tag the name of this file can be specified.
1640
# The default file is: searchdata.xml.
1641
# This tag requires that the tag SEARCHENGINE is set to YES.
1643
SEARCHDATA_FILE = searchdata.xml
1645
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
1646
# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1647
# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1648
# projects and redirect the results back to the right project.
1649
# This tag requires that the tag SEARCHENGINE is set to YES.
1653
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1654
# projects other than the one defined by this configuration file, but that are
1655
# all added to the same external search index. Each project needs to have a
1656
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
1657
# to a relative location where the documentation can be found. The format is:
1658
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
1659
# This tag requires that the tag SEARCHENGINE is set to YES.
1661
EXTRA_SEARCH_MAPPINGS =
1663
#---------------------------------------------------------------------------
1664
# Configuration options related to the LaTeX output
1665
#---------------------------------------------------------------------------
1667
# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
1668
# The default value is: YES.
1672
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
1673
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1675
# The default directory is: latex.
1676
# This tag requires that the tag GENERATE_LATEX is set to YES.
1680
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1683
# Note that when enabling USE_PDFLATEX this option is only used for generating
1684
# bitmaps for formulas in the HTML output, but not in the Makefile that is
1685
# written to the output directory.
1686
# The default file is: latex.
1687
# This tag requires that the tag GENERATE_LATEX is set to YES.
1689
LATEX_CMD_NAME = latex
1691
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
1693
# The default file is: makeindex.
1694
# This tag requires that the tag GENERATE_LATEX is set to YES.
1696
MAKEINDEX_CMD_NAME = makeindex
1698
# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
1699
# documents. This may be useful for small projects and may help to save some
1701
# The default value is: NO.
1702
# This tag requires that the tag GENERATE_LATEX is set to YES.
1706
# The PAPER_TYPE tag can be used to set the paper type that is used by the
1708
# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
1709
# 14 inches) and executive (7.25 x 10.5 inches).
1710
# The default value is: a4.
1711
# This tag requires that the tag GENERATE_LATEX is set to YES.
1715
# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
1716
# that should be included in the LaTeX output. The package can be specified just
1717
# by its name or with the correct syntax as to be used with the LaTeX
1718
# \usepackage command. To get the times font for instance you can specify :
1719
# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}1720
# To use the option intlimits with the amsmath package you can specify:
1721
# EXTRA_PACKAGES=[intlimits]{amsmath}1722
# If left blank no extra packages will be included.
1723
# This tag requires that the tag GENERATE_LATEX is set to YES.
1727
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
1728
# generated LaTeX document. The header should contain everything until the first
1729
# chapter. If it is left blank doxygen will generate a standard header. See
1730
# section "Doxygen usage" for information on how to let doxygen write the
1731
# default header to a separate file.
1733
# Note: Only use a user-defined header if you know what you are doing! The
1734
# following commands have a special meaning inside the header: $title,
1735
# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
1736
# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
1737
# string, for the replacement values of the other commands the user is referred
1739
# This tag requires that the tag GENERATE_LATEX is set to YES.
1743
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
1744
# generated LaTeX document. The footer should contain everything after the last
1745
# chapter. If it is left blank doxygen will generate a standard footer. See
1746
# LATEX_HEADER for more information on how to generate a default footer and what
1747
# special commands can be used inside the footer.
1749
# Note: Only use a user-defined footer if you know what you are doing!
1750
# This tag requires that the tag GENERATE_LATEX is set to YES.
1754
# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1755
# LaTeX style sheets that are included after the standard style sheets created
1756
# by doxygen. Using this option one can overrule certain style aspects. Doxygen
1757
# will copy the style sheet files to the output directory.
1758
# Note: The order of the extra style sheet files is of importance (e.g. the last
1759
# style sheet in the list overrules the setting of the previous ones in the
1761
# This tag requires that the tag GENERATE_LATEX is set to YES.
1763
LATEX_EXTRA_STYLESHEET =
1765
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
1766
# other source files which should be copied to the LATEX_OUTPUT output
1767
# directory. Note that the files will be copied as-is; there are no commands or
1769
# This tag requires that the tag GENERATE_LATEX is set to YES.
1773
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
1774
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
1775
# contain links (just like the HTML output) instead of page references. This
1776
# makes the output suitable for online browsing using a PDF viewer.
1777
# The default value is: YES.
1778
# This tag requires that the tag GENERATE_LATEX is set to YES.
1782
# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
1783
# the PDF file directly from the LaTeX files. Set this option to YES, to get a
1784
# higher quality PDF documentation.
1785
# The default value is: YES.
1786
# This tag requires that the tag GENERATE_LATEX is set to YES.
1790
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
1791
# command to the generated LaTeX files. This will instruct LaTeX to keep running
1792
# if errors occur, instead of asking the user for help. This option is also used
1793
# when generating formulas in HTML.
1794
# The default value is: NO.
1795
# This tag requires that the tag GENERATE_LATEX is set to YES.
1799
# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
1800
# index chapters (such as File Index, Compound Index, etc.) in the output.
1801
# The default value is: NO.
1802
# This tag requires that the tag GENERATE_LATEX is set to YES.
1804
LATEX_HIDE_INDICES = NO
1806
# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
1807
# code with syntax highlighting in the LaTeX output.
1809
# Note that which sources are shown also depends on other settings such as
1811
# The default value is: NO.
1812
# This tag requires that the tag GENERATE_LATEX is set to YES.
1814
LATEX_SOURCE_CODE = NO
1816
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1817
# bibliography, e.g. plainnat, or ieeetr. See
1818
# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
1819
# The default value is: plain.
1820
# This tag requires that the tag GENERATE_LATEX is set to YES.
1822
LATEX_BIB_STYLE = plain
1824
# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
1825
# page will contain the date and time when the page was generated. Setting this
1826
# to NO can help when comparing the output of multiple runs.
1827
# The default value is: NO.
1828
# This tag requires that the tag GENERATE_LATEX is set to YES.
1832
#---------------------------------------------------------------------------
1833
# Configuration options related to the RTF output
1834
#---------------------------------------------------------------------------
1836
# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
1837
# RTF output is optimized for Word 97 and may not look too pretty with other RTF
1839
# The default value is: NO.
1843
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
1844
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1846
# The default directory is: rtf.
1847
# This tag requires that the tag GENERATE_RTF is set to YES.
1851
# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
1852
# documents. This may be useful for small projects and may help to save some
1854
# The default value is: NO.
1855
# This tag requires that the tag GENERATE_RTF is set to YES.
1859
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
1860
# contain hyperlink fields. The RTF file will contain links (just like the HTML
1861
# output) instead of page references. This makes the output suitable for online
1862
# browsing using Word or some other Word compatible readers that support those
1865
# Note: WordPad (write) and others do not support links.
1866
# The default value is: NO.
1867
# This tag requires that the tag GENERATE_RTF is set to YES.
1871
# Load stylesheet definitions from file. Syntax is similar to doxygen's config
1872
# file, i.e. a series of assignments. You only have to provide replacements,
1873
# missing definitions are set to their default value.
1875
# See also section "Doxygen usage" for information on how to generate the
1876
# default style sheet that doxygen normally uses.
1877
# This tag requires that the tag GENERATE_RTF is set to YES.
1879
RTF_STYLESHEET_FILE =
1881
# Set optional variables used in the generation of an RTF document. Syntax is
1882
# similar to doxygen's config file. A template extensions file can be generated
1883
# using doxygen -e rtf extensionFile.
1884
# This tag requires that the tag GENERATE_RTF is set to YES.
1886
RTF_EXTENSIONS_FILE =
1888
# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
1889
# with syntax highlighting in the RTF output.
1891
# Note that which sources are shown also depends on other settings such as
1893
# The default value is: NO.
1894
# This tag requires that the tag GENERATE_RTF is set to YES.
1898
#---------------------------------------------------------------------------
1899
# Configuration options related to the man page output
1900
#---------------------------------------------------------------------------
1902
# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
1904
# The default value is: NO.
1908
# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
1909
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1910
# it. A directory man3 will be created inside the directory specified by
1912
# The default directory is: man.
1913
# This tag requires that the tag GENERATE_MAN is set to YES.
1917
# The MAN_EXTENSION tag determines the extension that is added to the generated
1918
# man pages. In case the manual section does not start with a number, the number
1919
# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
1921
# The default value is: .3.
1922
# This tag requires that the tag GENERATE_MAN is set to YES.
1926
# The MAN_SUBDIR tag determines the name of the directory created within
1927
# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
1928
# MAN_EXTENSION with the initial . removed.
1929
# This tag requires that the tag GENERATE_MAN is set to YES.
1933
# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
1934
# will generate one additional man file for each entity documented in the real
1935
# man page(s). These additional files only source the real man page, but without
1936
# them the man command would be unable to find the correct page.
1937
# The default value is: NO.
1938
# This tag requires that the tag GENERATE_MAN is set to YES.
1942
#---------------------------------------------------------------------------
1943
# Configuration options related to the XML output
1944
#---------------------------------------------------------------------------
1946
# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
1947
# captures the structure of the code including all documentation.
1948
# The default value is: NO.
1952
# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
1953
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1955
# The default directory is: xml.
1956
# This tag requires that the tag GENERATE_XML is set to YES.
1960
# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
1961
# listings (including syntax highlighting and cross-referencing information) to
1962
# the XML output. Note that enabling this will significantly increase the size
1964
# The default value is: YES.
1965
# This tag requires that the tag GENERATE_XML is set to YES.
1967
XML_PROGRAMLISTING = YES
1969
#---------------------------------------------------------------------------
1970
# Configuration options related to the DOCBOOK output
1971
#---------------------------------------------------------------------------
1973
# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
1974
# that can be used to generate PDF.
1975
# The default value is: NO.
1977
GENERATE_DOCBOOK = NO
1979
# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
1980
# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
1982
# The default directory is: docbook.
1983
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1985
DOCBOOK_OUTPUT = docbook
1987
# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
1988
# program listings (including syntax highlighting and cross-referencing
1989
# information) to the DOCBOOK output. Note that enabling this will significantly
1990
# increase the size of the DOCBOOK output.
1991
# The default value is: NO.
1992
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1994
DOCBOOK_PROGRAMLISTING = NO
1996
#---------------------------------------------------------------------------
1997
# Configuration options for the AutoGen Definitions output
1998
#---------------------------------------------------------------------------
2000
# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
2001
# AutoGen Definitions (see http://autogen.sf.net) file that captures the
2002
# structure of the code including all documentation. Note that this feature is
2003
# still experimental and incomplete at the moment.
2004
# The default value is: NO.
2006
GENERATE_AUTOGEN_DEF = NO
2008
#---------------------------------------------------------------------------
2009
# Configuration options related to the Perl module output
2010
#---------------------------------------------------------------------------
2012
# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
2013
# file that captures the structure of the code including all documentation.
2015
# Note that this feature is still experimental and incomplete at the moment.
2016
# The default value is: NO.
2018
GENERATE_PERLMOD = NO
2020
# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
2021
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
2022
# output from the Perl module output.
2023
# The default value is: NO.
2024
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2028
# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
2029
# formatted so it can be parsed by a human reader. This is useful if you want to
2030
# understand what is going on. On the other hand, if this tag is set to NO, the
2031
# size of the Perl module output will be much smaller and Perl will parse it
2033
# The default value is: YES.
2034
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2038
# The names of the make variables in the generated doxyrules.make file are
2039
# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
2040
# so different doxyrules.make files included by the same Makefile don't
2041
# overwrite each other's variables.
2042
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
2044
PERLMOD_MAKEVAR_PREFIX =
2046
#---------------------------------------------------------------------------
2047
# Configuration options related to the preprocessor
2048
#---------------------------------------------------------------------------
2050
# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
2051
# C-preprocessor directives found in the sources and include files.
2052
# The default value is: YES.
2054
ENABLE_PREPROCESSING = YES
2056
# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
2057
# in the source code. If set to NO, only conditional compilation will be
2058
# performed. Macro expansion can be done in a controlled way by setting
2059
# EXPAND_ONLY_PREDEF to YES.
2060
# The default value is: NO.
2061
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2065
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
2066
# the macro expansion is limited to the macros specified with the PREDEFINED and
2067
# EXPAND_AS_DEFINED tags.
2068
# The default value is: NO.
2069
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2071
EXPAND_ONLY_PREDEF = NO
2073
# If the SEARCH_INCLUDES tag is set to YES, the include files in the
2074
# INCLUDE_PATH will be searched if a #include is found.
2075
# The default value is: YES.
2076
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2078
SEARCH_INCLUDES = YES
2080
# The INCLUDE_PATH tag can be used to specify one or more directories that
2081
# contain include files that are not input files but should be processed by the
2083
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
2087
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
2088
# patterns (like *.h and *.hpp) to filter out the header-files in the
2089
# directories. If left blank, the patterns specified with FILE_PATTERNS will be
2091
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2093
INCLUDE_FILE_PATTERNS =
2095
# The PREDEFINED tag can be used to specify one or more macro names that are
2096
# defined before the preprocessor is started (similar to the -D option of e.g.
2097
# gcc). The argument of the tag is a list of macros of the form: name or
2098
# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
2099
# is assumed. To prevent a macro definition from being undefined via #undef or
2100
# recursively expanded use the := operator instead of the = operator.
2101
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2105
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
2106
# tag can be used to specify a list of macro names that should be expanded. The
2107
# macro definition that is found in the sources will be used. Use the PREDEFINED
2108
# tag if you want to use a different macro definition that overrules the
2109
# definition found in the source code.
2110
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2114
# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2115
# remove all references to function-like macros that are alone on a line, have
2116
# an all uppercase name, and do not end with a semicolon. Such function macros
2117
# are typically used for boiler-plate code, and will confuse the parser if not
2119
# The default value is: YES.
2120
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2122
SKIP_FUNCTION_MACROS = YES
2124
#---------------------------------------------------------------------------
2125
# Configuration options related to external references
2126
#---------------------------------------------------------------------------
2128
# The TAGFILES tag can be used to specify one or more tag files. For each tag
2129
# file the location of the external documentation should be added. The format of
2130
# a tag file without this location is as follows:
2131
# TAGFILES = file1 file2 ...
2132
# Adding location for the tag files is done as follows:
2133
# TAGFILES = file1=loc1 "file2 = loc2" ...
2134
# where loc1 and loc2 can be relative or absolute paths or URLs. See the
2135
# section "Linking to external documentation" for more information about the use
2137
# Note: Each tag file must have a unique name (where the name does NOT include
2138
# the path). If a tag file is not located in the directory in which doxygen is
2139
# run, you must also specify the path to the tagfile here.
2143
# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2144
# tag file that is based on the input files it reads. See section "Linking to
2145
# external documentation" for more information about the usage of tag files.
2149
# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
2150
# the class index. If set to NO, only the inherited external classes will be
2152
# The default value is: NO.
2156
# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
2157
# in the modules index. If set to NO, only the current project's groups will be
2159
# The default value is: YES.
2161
EXTERNAL_GROUPS = YES
2163
# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
2164
# the related pages index. If set to NO, only the current project's pages will
2166
# The default value is: YES.
2170
# The PERL_PATH should be the absolute path and name of the perl script
2171
# interpreter (i.e. the result of 'which perl').
2172
# The default file (with absolute path) is: /usr/bin/perl.
2174
PERL_PATH = /usr/bin/perl
2176
#---------------------------------------------------------------------------
2177
# Configuration options related to the dot tool
2178
#---------------------------------------------------------------------------
2180
# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
2181
# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2182
# NO turns the diagrams off. Note that this option also works with HAVE_DOT
2183
# disabled, but it is recommended to install and use dot, since it yields more
2185
# The default value is: YES.
2189
# You can define message sequence charts within doxygen comments using the \msc
2190
# command. Doxygen will then run the mscgen tool (see:
2191
# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
2192
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
2193
# the mscgen tool resides. If left empty the tool is assumed to be found in the
2194
# default search path.
2198
# You can include diagrams made with dia in doxygen documentation. Doxygen will
2199
# then run dia to produce the diagram and insert it in the documentation. The
2200
# DIA_PATH tag allows you to specify the directory where the dia binary resides.
2201
# If left empty dia is assumed to be found in the default search path.
2205
# If set to YES the inheritance and collaboration graphs will hide inheritance
2206
# and usage relations if the target is undocumented or is not a class.
2207
# The default value is: YES.
2209
HIDE_UNDOC_RELATIONS = NO
2211
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2212
# available from the path. This tool is part of Graphviz (see:
2213
# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
2214
# Bell Labs. The other options in this section have no effect if this option is
2216
# The default value is: YES.
2220
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2221
# to run in parallel. When set to 0 doxygen will base this on the number of
2222
# processors available in the system. You can set it explicitly to a value
2223
# larger than 0 to get control over the balance between CPU load and processing
2225
# Minimum value: 0, maximum value: 32, default value: 0.
2226
# This tag requires that the tag HAVE_DOT is set to YES.
2230
# When you want a differently looking font in the dot files that doxygen
2231
# generates you can specify the font name using DOT_FONTNAME. You need to make
2232
# sure dot is able to find the font, which can be done by putting it in a
2233
# standard location or by setting the DOTFONTPATH environment variable or by
2234
# setting DOT_FONTPATH to the directory containing the font.
2235
# The default value is: Helvetica.
2236
# This tag requires that the tag HAVE_DOT is set to YES.
2238
DOT_FONTNAME = Helvetica
2240
# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2242
# Minimum value: 4, maximum value: 24, default value: 10.
2243
# This tag requires that the tag HAVE_DOT is set to YES.
2247
# By default doxygen will tell dot to use the default font as specified with
2248
# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
2249
# the path where dot can find it using this tag.
2250
# This tag requires that the tag HAVE_DOT is set to YES.
2254
# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2255
# each documented class showing the direct and indirect inheritance relations.
2256
# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2257
# The default value is: YES.
2258
# This tag requires that the tag HAVE_DOT is set to YES.
2262
# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2263
# graph for each documented class showing the direct and indirect implementation
2264
# dependencies (inheritance, containment, and class references variables) of the
2265
# class with other documented classes.
2266
# The default value is: YES.
2267
# This tag requires that the tag HAVE_DOT is set to YES.
2269
COLLABORATION_GRAPH = YES
2271
# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2272
# groups, showing the direct groups dependencies.
2273
# The default value is: YES.
2274
# This tag requires that the tag HAVE_DOT is set to YES.
2278
# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2279
# collaboration diagrams in a style similar to the OMG's Unified Modeling
2281
# The default value is: NO.
2282
# This tag requires that the tag HAVE_DOT is set to YES.
2286
# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
2287
# class node. If there are many fields or methods and many nodes the graph may
2288
# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2289
# number of items for each type to make the size more manageable. Set this to 0
2290
# for no limit. Note that the threshold may be exceeded by 50% before the limit
2291
# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2292
# but if the number exceeds 15, the total amount of fields shown is limited to
2294
# Minimum value: 0, maximum value: 100, default value: 10.
2295
# This tag requires that the tag HAVE_DOT is set to YES.
2297
UML_LIMIT_NUM_FIELDS = 20
2299
# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2300
# collaboration graphs will show the relations between templates and their
2302
# The default value is: NO.
2303
# This tag requires that the tag HAVE_DOT is set to YES.
2305
TEMPLATE_RELATIONS = YES
2307
# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2308
# YES then doxygen will generate a graph for each documented file showing the
2309
# direct and indirect include dependencies of the file with other documented
2311
# The default value is: YES.
2312
# This tag requires that the tag HAVE_DOT is set to YES.
2316
# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
2317
# set to YES then doxygen will generate a graph for each documented file showing
2318
# the direct and indirect include dependencies of the file with other documented
2320
# The default value is: YES.
2321
# This tag requires that the tag HAVE_DOT is set to YES.
2323
INCLUDED_BY_GRAPH = YES
2325
# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2326
# dependency graph for every global function or class method.
2328
# Note that enabling this option will significantly increase the time of a run.
2329
# So in most cases it will be better to enable call graphs for selected
2330
# functions only using the \callgraph command. Disabling a call graph can be
2331
# accomplished by means of the command \hidecallgraph.
2332
# The default value is: NO.
2333
# This tag requires that the tag HAVE_DOT is set to YES.
2337
# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2338
# dependency graph for every global function or class method.
2340
# Note that enabling this option will significantly increase the time of a run.
2341
# So in most cases it will be better to enable caller graphs for selected
2342
# functions only using the \callergraph command. Disabling a caller graph can be
2343
# accomplished by means of the command \hidecallergraph.
2344
# The default value is: NO.
2345
# This tag requires that the tag HAVE_DOT is set to YES.
2349
# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2350
# hierarchy of all classes instead of a textual one.
2351
# The default value is: YES.
2352
# This tag requires that the tag HAVE_DOT is set to YES.
2354
GRAPHICAL_HIERARCHY = YES
2356
# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2357
# dependencies a directory has on other directories in a graphical way. The
2358
# dependency relations are determined by the #include relations between the
2359
# files in the directories.
2360
# The default value is: YES.
2361
# This tag requires that the tag HAVE_DOT is set to YES.
2363
DIRECTORY_GRAPH = YES
2365
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2366
# generated by dot. For an explanation of the image formats see the section
2367
# output formats in the documentation of the dot tool (Graphviz (see:
2368
# http://www.graphviz.org/)).
2369
# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2370
# to make the SVG files visible in IE 9+ (other browsers do not have this
2372
# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
2373
# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
2374
# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
2375
# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
2376
# png:gdiplus:gdiplus.
2377
# The default value is: png.
2378
# This tag requires that the tag HAVE_DOT is set to YES.
2380
DOT_IMAGE_FORMAT = png
2382
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2383
# enable generation of interactive SVG images that allow zooming and panning.
2385
# Note that this requires a modern browser other than Internet Explorer. Tested
2386
# and working are Firefox, Chrome, Safari, and Opera.
2387
# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2388
# the SVG files visible. Older versions of IE do not have SVG support.
2389
# The default value is: NO.
2390
# This tag requires that the tag HAVE_DOT is set to YES.
2394
# The DOT_PATH tag can be used to specify the path where the dot tool can be
2395
# found. If left blank, it is assumed the dot tool can be found in the path.
2396
# This tag requires that the tag HAVE_DOT is set to YES.
2400
# The DOTFILE_DIRS tag can be used to specify one or more directories that
2401
# contain dot files that are included in the documentation (see the \dotfile
2403
# This tag requires that the tag HAVE_DOT is set to YES.
2407
# The MSCFILE_DIRS tag can be used to specify one or more directories that
2408
# contain msc files that are included in the documentation (see the \mscfile
2413
# The DIAFILE_DIRS tag can be used to specify one or more directories that
2414
# contain dia files that are included in the documentation (see the \diafile
2419
# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2420
# path where java can find the plantuml.jar file. If left blank, it is assumed
2421
# PlantUML is not used or called during a preprocessing step. Doxygen will
2422
# generate a warning when it encounters a \startuml command in this case and
2423
# will not generate output for the diagram.
2427
# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
2428
# configuration file for plantuml.
2432
# When using plantuml, the specified paths are searched for files specified by
2433
# the !include statement in a plantuml block.
2435
PLANTUML_INCLUDE_PATH =
2437
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2438
# that will be shown in the graph. If the number of nodes in a graph becomes
2439
# larger than this value, doxygen will truncate the graph, which is visualized
2440
# by representing a node as a red box. Note that doxygen if the number of direct
2441
# children of the root node in a graph is already larger than
2442
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
2443
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
2444
# Minimum value: 0, maximum value: 10000, default value: 50.
2445
# This tag requires that the tag HAVE_DOT is set to YES.
2447
DOT_GRAPH_MAX_NODES = 50
2449
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2450
# generated by dot. A depth value of 3 means that only nodes reachable from the
2451
# root by following a path via at most 3 edges will be shown. Nodes that lay
2452
# further from the root node will be omitted. Note that setting this option to 1
2453
# or 2 may greatly reduce the computation time needed for large code bases. Also
2454
# note that the size of a graph can be further restricted by
2455
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
2456
# Minimum value: 0, maximum value: 1000, default value: 0.
2457
# This tag requires that the tag HAVE_DOT is set to YES.
2459
MAX_DOT_GRAPH_DEPTH = 0
2461
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2462
# background. This is disabled by default, because dot on Windows does not seem
2463
# to support this out of the box.
2465
# Warning: Depending on the platform used, enabling this option may lead to
2466
# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2468
# The default value is: NO.
2469
# This tag requires that the tag HAVE_DOT is set to YES.
2473
# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
2474
# files in one run (i.e. multiple -o and -T options on the command line). This
2475
# makes dot run faster, but since only newer versions of dot (>1.8.10) support
2476
# this, this feature is disabled by default.
2477
# The default value is: NO.
2478
# This tag requires that the tag HAVE_DOT is set to YES.
2480
DOT_MULTI_TARGETS = NO
2482
# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2483
# explaining the meaning of the various boxes and arrows in the dot generated
2485
# The default value is: YES.
2486
# This tag requires that the tag HAVE_DOT is set to YES.
2488
GENERATE_LEGEND = YES
2490
# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
2491
# files that are used to generate the various graphs.
2492
# The default value is: YES.
2493
# This tag requires that the tag HAVE_DOT is set to YES.